AR MO of various LWSSLIS under JSV Sub Division Kotla in Tehsil Jawali Distt. Kangra HP SH Making arrangement without hindrance to providing construction repair of various Distribution system of water supply

Amount

Providing MS flanges of following dia (in pairs) for the joint of MSERW pipe pipe mentioned as below and same shall be conform T-5 to BIS 6392-1971 (latest with upto date ammendments) including the cost of nuts and bolts of required sizes 3 mm thick copressed asbestos fiber/synthetic rubber sheet gasket conforming to relevent BIS standard and it shall including carriage of material with in all leads and lifts as per the direction and satisfaction of Engineer-in-charge.

125 mm dia

100 mm dia

80 mm dia

65 mm dia

50 mm dia

Providing and fixing of GI bends of following dia both side flange T-17 of various degree complete i/c cutting welding rubber sheet gasket 3mm thick of champion make nuts and bolts complete in all respect as per satisfaction of Engineer-in-charge.

100 mm dia.x 22.5 degree

80 mm dia.x 22.5 degree

65 mm dia.x 22.5 degree

50 mm dia.x 22.5 degree

Excavation in foundation and trenches etc., in earth work in all classification of soil such as pick,jumper work hard and soft rock etc upto all lifts stacking teh excavated soil not more than 3 meter clear from the edge of the excavation and then returning the stacked soil in 15cm. Layer when required into plinth side of foundation consolidating each deposited layer by ramming and watering in all kind of soil and including jungle clearing, uprooting of rank, vegetation, grass bursh wood, trees and sapling of all girth/ depth as directed with in all leads and lifts disposal of excavation earth as directed and satisfaction by the Enginner-in-charge with in all leads and lifts.

Providing and fixing cast iron double flanged sluice valve of Kirloskar/KSV/Kilburn/BHEL /Leader make of following dia and class PN 1.6 capable of with standing nominal seat pressure of 16.00 kg/cm2 (as per IS-780-1984) latest with upto date ammendments if any) complete in all respect as per direction and satisfaction of Engineer-in-charge.

150mm dia.

100 mm dia.

80 mm dia.

65 mm dia.

50 mm dia.

Providing and laying Cement concrete1:6:12(1:cement :6 sand:12 graded crushed stone aggregate and curing the complete with in all respect with in all leads and lifts as per the direction and satisfaction of the Engineer-in-charge.

Providing and laying Cement concrete1:3:6(1:cement :3 sand:6 graded crushed stone aggregate and curing the complete with in all respect with in all leads and lifts as per the direction and satisfaction of the Engineer-in-charge.

Providing and fixing of wheel valve MS chambers 150x150x600 mm of MS flat 2 mm thick and also providing extra length of 250mm of same steel in bottom of four legs for and embedding in the cement concrete and top opening will be provided with locking arrangement in all leads and lifts.

Making connection with already laid pipe of 80mm dia in the distribution system and with the out let point of the over head tank with the help of generator set at the site of work complete in all respect with in all leads and lifts as per the direction and satisfaction of the Engineer-in-charge.

P/F GI reducer of various diameters.

Providing and fixing of GI Elbow hevy duty ISI marked complete at site.

20 mm dia.

25 mm dia.

32 mm dia

40 mm dia

50 mm dia

65 mm dia

Providing and fixing of GI Tee hevy duty ISI marked complete at site.

Providing and fixing of GI Socket hevy duty ISI marked complete at site.

20 mm dia.

25 mm dia.

32 mm dia

40 mm dia

50 mm dia

65 mm dia

Providing electric welding (Triple layer) at site with diesel engine generator welding set required for repair of 400 mm dia rising main at different RD's to stop the leakage problem including cost of carriage of generator set at site at site with in all leads and lifts as per direction and satisfaction of Engineer-in-charge.

Parbhat Singh Harchand

KULDEEP DOGRA