REPAIRS TO CERTAIN STEEL FURNITURE UNDER BSO ND OF GE ND VISAKHAPATNAM

Amount

M & L for removing unserviceble handle of Almirah small steel / Almirah large steel / Almirah large 1/2 hanging x 1/2 shelves steel replacing with chromium plated handle, 100mm long, as per godrej pattern complete all as specified and directed.(FD-1031/1032/1033/350/351)

M & L for one side leg of Almirah steel large / small / 1/2 hanging x 1/2 shelves, left or right, 70mm wide and 100 mm high, open ends bent outwards upto 15mm, MS sheet of 1.6mm thick, welding the channel to bottom of almirah at 50mm from the side of almirah including 2 coats of synthetic enamel paint olive green/ smoke grey colour complete all as specified and directed. (FD-1031/1032/1033/350/351)

M & L for 3 way locking device as per godrej pattern, fully operational with the existing handle duly painted all as specified and as directed. (FD-1031/1032/1033/350/351)

M & L steel cupboard lock, 50mm size, 6 lever with stainless steel keys in duplicate as per godrej pattern all as specified and as directed. (FD-1031/1032/1033/350/351)

M & L steel cleats for supporting shelves suitable to existing type / model of almirah duly painted all as specified and as directed. (FD1031/1032/1033/350/351)

M & L replacement of old broken glass shutter of Almirah large steel glazed and fixed with new glass shutter of 3mm thick all as specified and as directed. [FD-104(M)]

M & L for preparation of old treated steel surfaces of Almirah large with shelves and applying two coats of synthetic enamel paint smoke grey / olive green colour complete all as specified and directed. FD-67(M)1031/351

M & L for preparation of old treated steel surfaces of Almirah medium with shelves and applying two coats of synthetic enamel paint smoke grey / olive green colour complete all as specified and directed. FD-243/350/1032

M & L for preparation of old treated steel surfaces of Almirah large half shelf and half hanging and applying two coats of synthetic enamel paint smoke grey / olive green colour complete all as specified and directed. FD-1033,FD/E6/MAP/18

M & L for preparation of old treated steel surfaces of Almirah large steel glazed and applying two coats of synthetic enamel paint smoke grey / olive green colour complete all as specified and directed. FD-104(M)

M & L steel cupboard lock, 50mm size, 6 lever with stainless steel keys in duplicate of book case steel as per godrej pattern all as specified and as directed. (FD-1028)

M & L removing old broken handles of Book case steel and replacing with chromium plated handle, 100mm long all as specified and as directed. (FD-1028)

M & L removing old broken glass shutter of Book case steel glazed and fixed with new glass shutter of 3mm thick all as specified and as directed. (FD-1028)

M & L for preparation of old treated steel surfaces of book case and applying two coats of synthetic enamel paint smoke grey / olive green colour complete all as specified and directed. (FD-1028)

M & L for removing old unserviceble bow handle of locker bed side steel and reolacing with new bow handle aluminium, 100mm long fixed to each shutter all as specified and as directed. FD-257/1029

M & L for removing old hasp & staple and replacing with new safety type hasp & staple, chromium plated steel of size 75x40x3mm all as specified and directed [FD-257/1029]

M & L for chromium plated steel tower bolt, 50mm size welded to top or bottom of right shutter all as specified and as directed. (FD-257/1029)

M & L for chromium plated steel conduit pipe 20mm dia, 1.6mm thick, 380mm long, fixed to existing pair of sockets on the upper portion of the left chamber all as specified and directed.[FD-257/1029]

M&L for one side leg of locker bedside steel left or right, 70mm wide and 100mm high, open ends bent outwards upto 15mm, MS sheet of 1.6mm thick, welding the channel to bottom of almirah at 50mm from the side of locker including 2 coats of synthetic enamel paint olive green / smoke grey colour complete all as specified and directed [FD-1029/257]

M & L for preparation of old treated steel surfaces of locker bedside and applying two coats of synthetic enamel paint smoke grey / olive green colour complete all as specified and directed. (FD-1028)

M & L for replacing old broken left or right side frame including the side front/rear leg portions and the top handle portion of chair verandah, with new 20mm dia 16 G steel conduit pipe of 1 mtr each shall be measured, duly welded to the seat frame and also to the 10mm dia MS rod in front. Replaced conduit frame to be given 2 coats of synthetic enamel paint (white colour) over a coat of red oxide zinc chromate primer complete to match with existing colour all as specified and as directed. [FD-256]

M & L for canning chair verandah with new plastic cane of size 3.0x0.60mm cane including taking out old/damaged plastic cane from chair verandah and cleaning the entire surface complete all as specified and directed. [FD-256]

S & F new PVC shoes to bottom legs of chair verandah all as specified in drg and as directed [FD-256]

M & L for preparation of old treated steel surfaces of chair verandah as per drawing no.FD-256 and applying two coats of synthetic enamel paint complete all as specified.

M & L for replacing old broken left or right side frame including the side front/rear leg portions and the top handle portion of chair verandah, with new 20mm dia 16 G steel conduit pipe of 1 mtr each shall be measured, duly welded to the seat frame and also to the 10mm dia MS rod in front. Replaced conduit frame to be given 2 coats of synthetic enamel paint (white colour) over a coat of red oxide zinc chromate primer complete to match with existing colour all as specified and as directed. [FD/MAP-II/15]

M & L for removing unserviceable / broken PVC seat & back from chair verandah and fix new PVC seat & back with 4mm ribs on back side all as specified and as directed. [FD/MAP-II/15]

M & L for fixing 10mm dia MS rod below PVC seat & back each by way of welding to both side of conduit pipes 20mm dia horizontrally for supporting PVC seat & back and provide suitable provision on seat & back to place in tact on new stiffners of chair verandah all as specified and as directed. [FD/MAP-II/15]

S & F new PVC shoes to bottom legs of chair verandah all as specified in drg and as directed [FD/MAP-II/15]

M & L for preparation of old treated steel surfaces of chair verandah and applying two coats of synthetic enamel paint complete all as specified. [FD/MAP-II/15]

Removal of existing damaged top of teapoy verandah and replacing the same with new top made out of 700x400mm size, 18mm thick prelaminated particle board (white finish on top) with first class teak wood edging 3mm thick all sides duly fixed to the conduit frame with screws from below the conduit including french polishing TW edging complete all as shown in drg and as directed. (FD/E6EMAP/17)

M & L for preparation of old treated steel surfaces of teapoy verandah and applying two coats of synthetic enamel paint black colour complete all as specified. (FD/E6EMAP/17)

S & F new PVC shoes to bottom legs of teapoy verandah all as specified in drg and as directed (FD/E6EMAP/17)

Removal of existing damaged top of teapoy verandah and replacing the same with new top made out of 900x450mm size, 18mm thick prelaminated particle board (white finish on top) with first class teak wood edging 3mm thick all sides duly fixed to the conduit frame with screws from below the conduit including french polishing TW edging complete all as shown in drg and as directed. (FD-208/253)

M & L for preparation of old treated steel surfaces of teapoy verandah and applying two coats of synthetic enamel paint white colour complete all as specified. (FD-208/253)

S & F new PVC shoes to bottom legs of teapoy verandah all as specified in drg and as directed (FD-208/253)

M & L 18mm thick prelaminated particle board, lamianted one side with decorative choice lamination & other side balancing white lamination as in 585x300mm size writing board of chair school with hand board including PVC edging alround, screwed to existing 25mm dia hollow steel pipe inserted in 20mm dia MS rod welded to frame included taking out old unserviceble writing board complete all as specified and directed.[FD/E6/MAP/05]

S & F PVC inner shoe suitable for 25mm dia MS pipe leg of chair school complete all as specified and directed. [FD/E6/MAP/05]

M&L for removing unserviceble broken PVC seat from chair school with hand board and fix new one piece PVC seat & back (Blowplast or equivalent) all as specified and as directed. [FD/E6/MAP/05]

M & L for preparation of old treated steel surfaces of chair school with hand board and applying two coats of synthetic enamel paint black/brown paint complete all as specified. [FD/E6/MAP/05]

M & L 18mm thick prelaminated particle board, lamianted one side with decorative choice lamination & other side balancing white lamination to match with existing colour & texture as top/side/back of table bedside with PVC edging including taking out old unserviceable board complete all as specified and directed. [FD/MAP/15(R)]

M & L 18mm thick prelaminated particle board, lamianted one side with decorative choice lamination & other side balancing white lamination to match with existing colour & texture as in front shutter of table bedside with PVC edging fixed with MS piano hinges including taking out old unserviceable board complete all as specified and directed. [FD/MAP/15(R)]

M & L 18mm thick prelaminated particle board, lamianted one side with decorative choice lamination & other side balancing white lamination to match with existing colour & texture as front and sides of drawer and bottom shall be fixed with 6mm commercial plywood of table bedside with PVC edging alround including taking out old unserviceable board complete all as specified and directed. [FD/MAP/15(R)]

M & L for MS right angle of size 50x30x5mm thick to fix table top of table bedside by screwing to side shutter of table all as specified. [FD/MAP/15(R)]

S & F 50mm long, chromium plated handle suitable for table bed side complete all as specified and as directed. [FD/MAP/15(R)]

S & F PVC shoe suitable for 25mm MS square pipe leg of table bedside complete all as specified and as directed. [FD/MAP/15(R)]

M & L for preparation of old treated steel surfaces of table bedside steel (MAP) and applying two coats of synthetic enamel paint black colour complete all as specified. [FD/MAP/15(R)]

Mahesh Traders

Chitturi Associates

SANTOSH CONSTRUCTIONS

M/s.Kissenlal Daga

NU-GIFT INDUSTRIES