Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹8.1 LAWARDED | AWARDED |
Tender Value
₹12.6 L
EMD Value
₹31,700
Closing Date
8 Jan 2026, 11:00 pmClosed
Karnataka Power Corporation Limited
R & M works of existing water supply pipe lines at Administrative building,Green building and ornamental gardens at RTPS
KPCL/2025-26/OW/WORK_INDENT3818
KPCL/2025-26/OW/WORK_INDENT3818
Open
Other Works
Two Tender Document System(Two Cover)
KPCL Executive Engineer PCM2 Office RTPS Raichur
₹500
₹31,700
24 Dec 2025
24 Dec 2025
10 Jan 2026
5 Jan 2026
R & M works of existing water supply pipe lines at Administrative building,Green building and ornamental gardens at RTPS
Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge Bitu...
Removing & Resetting existing Heavy Duty Cobble/Interlocking stones/Pavers of thickness 60/75/80/100mm using Cement and 40mm thick sand bed ( average thickness ) and compacting with plate vibrator to ...
Providing and fixing Unplasticised Polyvinyl Chloride 100 mm nominal dia (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittin...
Providing and fixing Unplasticised Polyvinyl Chloride 50mm nominal dia (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings...
Providing and fixing Unplasticised Polyvinyl Chloride 25mm nominal dia (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings...
Providing and fixing PTMT bib cock of approved quality and colour 15 mm nominal bore, 90 mm long, weighing not less than 93 g
Supply of PPR Ball Valve of 25mmPlastic (Heavy Body) confirming to IS 15801- 2008 and DIN Standards 8077/8092.
Supply of PPR Ball Valve of 50mmPlastic (Heavy Body) confirming to IS 15801- 2008 and DIN Standards 8077/8092.
Providing and fixing of 100mm dia DI Double flanged wafer type (Concentric) / double eccentrically disc, Resilent seated Butterfly valves confoming to BS EN 593 / IS 13095 with shaft shall be of stain...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Providing and fixing Structural Steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel prim...
Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates andfine aggregates as per relevant IS Codes machine mixed with super ...
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Providing and fixing Linear low-density polyethylene (LLDPE) 20 mm nominal dia Drip irrigation pipes,Wall Thickness of 1.2 to 1.4mm , Must be resistend to UV-resistant for durability in sunlight expos...
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .