Repair and maintenance of staff quarters of the Technical Education Board at Dari, Dharamshala, Distt. Kangra (HP). SH- Painting, replacement of damaged doors/ windows and other minor repair works etc.

Amount

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within all leads and lifts.

Taking out doors, windows and clerestory window shutters (steel or wood) rolling shutters including stacking within all leads and lifts as per direction of Engineer-in-charge

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within all lead as per direction of Engineer-in-charge In cement mortar.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 insuperstructure above plinth level up to floor V level Cement mortar 1:4 (1 cement :4 coarse sand) including curing & carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts,as per PWD specifications and as per direction of the Engineer-in-charge.

Demolishing cement concrete manually/ bymechanical means including disposal of material within all lead as per direction of Engineer - in - charge.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within all leads and lifts.

Dismantling of water closet (European type WC pan) type/ orrrisa type including fliushing cistern and wash basin ,sink of all types including stacking of useful materials near the site and disposal of unserviceable materials within all leads and lifts.

Disconnecting existing water supply pipeline connections, capping or plugging exposed pipes left with in the wall and restoring the wall surface to match the existing finish including carriage of material within all lead and lifts.

Providing and fixing Centering and shuttering including strutting, proppingetc. and removal of form including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts,as per PWD specifications and as per direction of the Engineer-in-charge.for a)Suspended floors, roofs, landings, balconies and access platform including carriage of material within all lead and lifts.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains, including dressing of sides and ramming of bottoms, upto all lifts, including getting out the excavated soil and disposal of surplus excavated soil as directed, within all leads and lifts.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts,as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., completeincluding carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts,as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing Ist quality ceramic glazed/digital wall tiles of size 300 x 600 mm conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts,as per PWD specifications and all complete as specified and as directed by the Engineer-in-Charge

Providing and laying Reinforced cement concrete work 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in all height including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. all work upto plinth level.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of gradeFe-500D or more including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts,as per PWD specifications and as per direction of the Engineer-in-charge.

15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement: 6 fine sand)including curing and carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts,as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in?charge. (Glazing, paneling and dash fasteners to be paid for separately) : (A) For Fixed Portion Powder coated aluminium (minimum thickness of powder coating 50 micron)

(B) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivotsand making provision for fixing of fittingswherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge with float glass panes of 4 mm thickness(weight not less than 10.00 kg/ sqm) including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts,as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete with aluminum beading including carriage of material within all leads and lifts including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts,as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing Aluminium composite panel sheet 3 mm thick of required shade complete including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts,as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :250x16mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete a)150x10mm

Providing and fixing aluminium handles dyed to required colour or shade with necessary screws etc.complete. (a) 200mm

Providing and fixing bright finished brass hard drawn hooks and eyes 150mm including carriage of material with in all lead and lifts.

Providing and fixing 12mm prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge.Pre-laminated particle board with decorative lamination on both sides including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts,as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts,as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts,as per PWD specifications and as per direction of the Engineer-in-charge.

Steel work welded in built up sections/ framed work,including cutting, hoisting, fixing in position and applyinga priming coat of approved steel primer using structural steel etc. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works as required including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts,as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge.

Providing corrugated G.S. sheet roofing includingvertical / curved surface fixed with polymer coated J or Lhooks, bolts and nuts 8 mm diameter with bitumen andG.I. limpet washers or with G.I. limpet washers filled withwhite lead, including a coat of approved steel primer andtwo coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m²

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete 0.63 mm thick with zinc coating not less than 275 gm/ m²

Removing white or colour wash by scrapping and sandpapering and preparing the surface smooth including necessary repairs to scratches etc. complete

Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade onnew work, over and including water thinnable primingcoat to give an even shade including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts,as per PWD specifications and as per direction of the Engineer-in-charge.

Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : New work (one or more coats) including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts,as per PWD specifications and as per direction of the Engineer-in-charge.

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two or more coats on new work including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts,as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts,as per PWD specifications and as per direction of the Engineer-in-charge.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade .painitng two or more coat including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts,as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing special quality bright finished brasscupboard or ward robe locks with four levers of approved quality including necessary screws etc.complete 40mm

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logowith ISI, IS : 3564, embossed on the body, door weightupto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110mm dia through all modes of transportation with in all leads and lifts,as per PWD specifications and as per direction of the Engineer-in-charge

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A,including jointing with seal ring conforming to IS : 5382,leaving 10 mm gap for thermal expansion.110mm bend through all modes of transportation with in all leads and lifts,as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of jointscomplete as per direction of Engineer in Charge.20mm nominal size, including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts,as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid,10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handlelever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good thewalls and floors wherever required.W.C. pan with ISI marked white solid plastic seat and lid including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts,as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing PVC floor trap ISI marked of self cleaning design i/c fixing with approved adhessive cost of cutting and making good the wall and floors etc. 110mm x 90mm through all modes of transportation with in all leads and lifts,as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste ofstandard pattern, including painting of fittings andbrackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts,as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15mm nominal bore Including carriage of material through all modes of transportation with in all leads and lifts,as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.15mm nominal bore including carriage of material through all modes of transportation with in all leads and lifts,as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing uplasticised PVC connection pipe with brass unions :30cm length.15mm nominal bore Including carriage of material through all modes of transportation with in all leads and lifts,as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.flexible pipe 32mm dia Including carriage of material through all modes of transportation with in all leads and lifts,as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing 100 mm sand cast Iron grating for gully trap Including carriage of material through all modes of transportation with in all leads and lifts,as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete Including carriage of material through all modes of transportation with in all leads and lifts,as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink without drain board 610x460 mm bowl depth 200 mm including carriage of material within all leads and lifts.

varun (BID ID -582650)

Rajeev Kumar (BID ID -581439)

VENYA CONSTRUCTIONS AND SUPPLIER (BID ID -580751)

Biri SIngh (BID ID -582772)