REPAIR TO VACANT QUARTERS AND OTHERS CONNECTED WORKS UNDER AGE B/R-I OF GE (NB) VISAKHAPATNAM

Amount

Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc stacking the serviceable bricks after removing mortar and cleaning for re-use and disposal of debris and rubbish to a distance n.exc 100m as directed by the Engr-in-Charge.

M & L for brick work with fly ash bricks, straight or curved on plan to any radius, built in cement mortar 1:4 as in half brick thick walls using old size brick complete all as specified and directed.

S & F high strength corrosion resistant TMT steel bars 6mm to 8mm dia., and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality as in half brick thick wall complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks of capapcity n.exc 250 Ltrs and from mouths of circulating pipes, etc. using bleaching powder and washed with water including dismantling and reconnecting and refixing in psoition including writing date of cleaning with nwhite synthetic enamel paint as "CLEANDED ON" complete all as specified and directed.

Taking down chowkats or frame, n.exc 1.5 Sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed.

Taking down chowkats or frames, exc 1.5 but n.exc. 4 Sqm in each with shutter (without taking off shutter from the frame) complete all as specified and directed.

Taking down shutters of any description n. exc 1 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but n. exc 2 Sqm each complete all as specified and directed.

S & F Well seasoned 2nd class hard wood plain, solid, straight chowkat and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

M & L for plain cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) for embedding holdfast, bed block, cills, etc including necessary form work complete all as specified and directed.

M & L for Mild steel Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S & F 35 mm thick, 2nd class hardwood, factory made, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F 30 mm thick, factory made, Second class hardwood, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, etc.; sizes of members of shutters as specified in SSR Part I complete all as specified and directed

S & F 30 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete as per specification and drawing and as directed.

S & F 100 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S & F 75 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S & F 150 mm long, Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F 200 mm long, Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F 100 mm long, Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F 125 mm size, Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F 150 mm size, extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F 125 mm, Gate and shutter, hooks and eyes, Aluminium plate type II complete all as specified and directed.

S & F Aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy, length of bolt of 300 mm complete all as specified and directed.

M & L for Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and directed.

S & F Powder coated (minimum 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. (Note : (i) Thickness of aluminium section shall not be less than 1.5 mm).

S & F Powder coated (minimum 50 micron) Anodised aluminium window and ventilator shutters, side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. and anodised aluminium fittings such as peg stay 150mm long (01 No), hinge type B-21, 100mm long (02 Nos) and suitable size of handle complete all as specified and directed.

Providing and fixing Powder coated Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge complete all as specified and directed.

Taking down, Resecuring or easing & adjusting and refixing in the same opeing shutter of any description exc 1 Sqm but n. exc 2 Sqm each including refixing builder's hardware as required and replacement of screws etc complete all as specified and directed.

Taking down, Resecuring or easing & adjusting and refixing in the same opeing shutter of any description n.exc 1 Sqm each including refixing builder's hardware as required and replacement of screws etc complete all as specified and directed.

Taking down, Resecuring or easing & adjusting and refixing in the same opeing shutter of any description exc 2.0 Sqm each including refixing builder's hardware as required and replacement of screws etc complete all as specified and directed.

S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F in repair 150 mm size, extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F in repairs 100 mm size, Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F in repairs 100 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S & F in repairs 75 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S & F in repair 200 mm long, Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F in repairs 125 mm long, Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F in repairs 125 mm, Gate and shutter, hooks and eyes, Aluminium plate type II complete all as specified and directed.

S & F in repairs, 300 mm long, mild steel, ordinary rat tail rod pattern springs incuding roller and roller plate complete all as specifed and directed.

S & F in repair Aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy, length of bolt of 300 mm complete all as specified and directed.

Taking down existing locking system contains any numbers of levers, replacing the stucked/ damaged levers and applying oil/grease to all part and making full functional properly and re-fixed in position complete all as specified and directed.

S & F in repairs Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, 30mm width of flape when open complete all as specified and directed.

S & F in repairs 100 mm, 6 lever, Brass, Mortice Lock, vertical type with two keys complete all as specified and directed.

S & F in repairs, 75mm size, night latch with two levers, brass body, polished bright; vertical type with brass knob or lever handle and fixed complete all as specified and directed.

S & F in repairs 20 mm bore, Brass chromium plated, tubular towel rail, D type, 60 cm long between flanges with brackets complete all as specified and directed.

S & F in repair fancy type brass magic eye for doors complete all as specified and directed.

S & F in repair 20 mm dia, Aluminium anodised, curtain rod with bracket complete all as specified and directed.

S & F in repairs 25 mm dia, stainless steel, fancy curtain rod, heavy duty, 2 to 3mm thick including stainless steel bracket of superior quality for each opening/door/window etc complete all as specified and directed.

S & F in repair Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.

S & F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, polished fixed with screws complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails etc complete all as specified and directed.

S & F 18/19 mm thick, Prelaminated Particle Board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in shutter of cup-board shelf, etc complete all as specified and as directed.

S & F 18/19 mm thick, plywood, grade BWP, type BB, fixed with screws to timber frame work, etc complete all as specified and directed.

S & F 0.90 mm thick, Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S & F 12 mm thick, plywood, grade BWP, type BB, fixed with screws, nails to timber frame work, etc complete all as specified and directed.

M & L for 18mm thick (+5%), 100% lead free, plain PVC solid sheet of minimum 0.55 density fixed as in kitchen cabinet including shutters and necessary fixing arrangement such as brackets, screws as required and all the edges shall be covered with 1mm thick edge bending tape or 90 degree edge bent finish as per the manufacturer's instructions complete all as specified and directed.

S & F 1.00 mm thick, Decorative PVC laminate of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S & F in repairs stainless steel basket of size 475mmx500mmx100mm with external width 475mm as in cutlery, cup and saucer basket etc to kitchen drawer modular type made out of stainless steel 4mm dia wire at 30mm c/c and fixed to PVC kitchen cabinets with necessary fixing arrangement and rolling facilities complete all as specified and directed. (Note: Work shall be carried out as per the manufacturer's instructions.)

S & F in repairs stainless steel basket of size 475mmx500mmx200mm with external width 475mm as in thali, plain wire basket etc to kitchen drawer modular type made out of stainless steel 4mm dia wire at 30mm c/c and fixed to PVC kitchen cabinets with necessary fixing arrangement and rolling facilities complete all as specified and directed. (Note: Work shall be carried out as per the manufacturer's instructions.)

S & F in repairs stainless steel sliding/telescopic channel of length 20 inch (500mm) with 3 Nos of holding ball of load carrying capacity 45-50 Kg of 202 grade steel, width 45mm including necessary fixing arrangement complete all as specified and directed.

S & F in repairs cold rolled nickel plated steel O crank soft closing concealed hinge (15-22mm) including necessary fixing arrangement to shutter complete all as specified and directed.

S & F in repairs stainless steel ventilator of size 100mmx100mm for cupboard shutter including necessary fixing arrangement to shutter complete all as specified and directed.

S & F in repairs stainless steel modular kitchen handle, 100mm long complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

S & F 4 mm thick, sheet glass, ordinary quality and glazing with wooden beads in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S & F 4 mm thick, sheet glass, ordinary quality and glazing to aluminium window exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S & F 4.8 mm thick, sheet glass, ordinary quality and glazing with rubber gasket etc in square exceeding 0.5 Sqm in each pane complete all as specified and as directed. (Note: The cost of rubber beads included with the unit quoted rate of respective aluminium shutter)

S & F 4.8 mm thick, sheet glass, ordinary quality and glazing with rubber gasket etc in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed. (Note: The cost of rubber beads included with the unit quoted rate of respective aluminium shutter)

Taking down aluminium doors / Window shutters / ventilators of any size carrying out minor repairs / adjacement including replacement of rubber beading, aluminium beads, cleats of as required size and refixing in same position complete all as specified and directed.

S & F in repairs, vitreous China wash basin, size 550 x 400mm, white, flat back including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.

S & F in repairs, Vitreous China squatting pan of pattern “long pan”, size 580 mm white with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe) including provision of lime concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing specifications complete all as specified and directed.

S & F in repairs, vitreous China wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and flushing pipe, anti syphonic pipe with seat and cover complete but excluding flushing cistern & flush pipe including making good damaged/disturbed surfaces complete all as specified and directed.

S & F in repairs Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook, 15mm bore complete all as specified and directed. (Make: Jaquar Cat No. ALD-565 or equivelant of make as per List of manufacturer's)

S & F in repair stainless steel Grating, 110mm dia fixed with white cement complete all as specified and as directed.

S & F in repair stainless steel Grating, 75mm dia fixed with white cement complete all as specified and as directed.

S & F in repairs, Brass CP mixer with 3-in-1 system for mixing hot & cold water screwed down for iron pipe, 15mm bore and fixed complete all as specified and directed

S & F in repairs 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends complete all as specified and directed.

S & F in repairs, 15mm bore, PVC connection pipe 600mm long with PTMT nuts at both ends complete all as specified and directed.

S & F in repairs, 15mm bore, PVC connection pipe 750mm long with PTMT nuts at both ends complete all as specified and directed.

S & F in repair 15 mm bore, Connection pipe, Chromium plated, 600 mm long with hexagonal nut & washers fitted at both ends complete all as specified and directed.

S & F in repair 40 mm dia, Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc including all fitting as required complete all as specified and directed.

S & F in repairs, plastic water closet, Seat and Cover for pedestal pan, white / black, closed pattern with flat bottom and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S & F in repairs, 10 litre capacity, PVC valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, flush pipe, float and handle including brackets complete all as specified and directed.

S & F in repairs PVC syphonic kit (any type/any pattern) suitable for 10 litre capacity low level flushing cistern and making the cistern functional in all respectcomplete all as specified and directed.

S & F in repairs float handle as per the existing specifications suitable for 10 litre capacity low level flushing cistern and making the cistern functional in all respect complete all as specified and directed.

S & F in repairs, stainless steel kitchen sinks with drainage board made of 1 mm thick sheet for kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F in repairs, Stainless steel, kitchen plate rack of size 24x30x10 inch as per existing design and specification as approved complete all as specified and directed. (Make: Prayag Cat No. P-330 or equivelant of make as per list of manufacturer's)

S & F in repairs brass spindle (heavy) suitable for bib taps/stop valve of 15mm bore all as per the existing specifications complete all as specified and directed.

S & F in repairs brass spindle (heavy) suitable for concealed stop cock of 15mm bore, any type all as per the existing specifications complete all as specified and directed.

S & F 225 litres capacity, rotational moulded polyethylene loft water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position including taking down old unserviceable one complete all as specified in SSR Part I and as directed.

S & F in repair 15 mm bore, Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 142 gms) complete all as specified and directed.

S & F in repairs, 15 mm bore, gun metal Gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S & F in repairs, 20 mm bore, gun metal Gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Taking up or down 15mm bore, Steel tubing and connections and keeping serviceable pipes in safe custody for reuse in the work after and including cleaning as directed.

Taking up or down 20mm bore, Steel tubing and connections and keeping serviceable pipes in safe custody for reuse in the work after and including cleaning as directed.

Refixing of 15mm bore old serviceable steel tubing and connections in new or old position with new fittings complete to walls and ceilings or laid in floors, etc complete as directed. (Note: Serviceable pipe shall be reused as obtained from serial item No. 99 above)

Refixing of 20mm bore old serviceable steel tubing and connections in new or old position with new fittings complete to walls and ceilings or laid in floors, etc complete as directed. (Note: Serviceable pipe shall be reused as obtained from serial item No. 100 above)

Supply, laying, connection and testing, 15mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and directed.

Supply, laying, connection and testing, 20mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and directed.

S & F in repairs, 15 mm bore, Stop valves, cast copper alloy, chromium plated with long shank and cup, concealed type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F in repairs, 15mm bore, bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs, 15 mm bore, pillar taps, fancy type, cast copper alloy, chromium plated with capstan heads, screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S & F in repairs, Brass CP mixer for sink/basin, long swan neck, two way, high presssure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed down for iron pipe, 15mm bore and fixed complete all as specified and directed

S & F in repair 125 mm size, shower rose, brass chromium plated, swival type, complete all as specified and directed.

S & F in repair 15 mm bore, angular stop valve, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and disposal of debris and rubbish to outside MD land complete all as specified and directed.

M & L for Vitrified, designed, dark shade/double charged/ ultracharged coloured, tiles, 7 to 8 mm thick, (square/rectangular) polished, area of each tiles not exc 0.36 sqm, in floors, etc including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for Vitrified, designed, light shade coloured (light shade), tiles, 7 to 8 mm thick, (square/rectangular) polished, area of each tiles not exc 0.36 sqm, in floors, etc including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for glazed, coloured, ceramic, tiles of size (350mm x 250 mm/450mm x 350mm/300mmx450mm) x 6 to 7 mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortor 1:4 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for Glazed, ceramic, coloured tiles of size 300mm x 200mm x 6-7mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortor 1:4 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M & L for 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 15 mm thick screed bed in cement mortor 1:6 & cutting, polishing complete all as specified and directed.

S & F in repair corner glass shelf assembly with chromium plated bracket guard and railing complete all as specified and directed. (Make: Jaquar Cat No. ACN-1173 or equivelant of approved make)

S & F in repairs, Toilet Roll Holder with Stainless Steel Flap, fixed to wall with brass screw complete all as specified and directed (Make: Jaquar Cat No. ACN-1153S or equivelant of make as per List of manufacturer's)

S & F in repairs, Towel Rack 600mm long with Lower Hangers, Stainless Steel including Chromium plated brass screws and wooden/plastic cleats etc complete all as specified and directed. (Make: Jaquar Cat No. AKP-35781PS or equivelant of make as per list of manufacturer's)

S & F in repairs, Towel Ring round including Chromium plated brass screws and wooden/plastic cleats etc complete all as specified and directed. (Make: Jaquar Cat No. AQN-7721 or equivelant of make as per list of manufacturer's)

Demolition of un-reinforced cement Concrete of any description and in any position not otherwise specifically provided for and removing rubbish to outside MD land complete all as specified and directed.

M & L for filling polymer modified non shrinking slurry with CEBEX 100 (Fosroc) chemical for sunken floors for toilets by drilling holes to a depth of 60mm by 20mm dia at 1 mtr interval and applying 2mm thick brush bond over the concrete syrfaces by mixing acrylic emulsion NITO BOND BB with brush bond powder and water as per the manufacturer's technical specification complete all as specified and as directed (Make: M/S Fosroc or M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd.)

M & L for rendering 10 mm thick in cement mortar 1:3 on fair faces of brick masonry or concrete surfaces and finishing the surfaces even and fair without using extra cement mixed with water proofing compound as per manufacturer's instructions complete all as specified and directed. (Note: WPC shall be measured and paid seperately)

M & L for Plain cement concrete 1:5:10, type E-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, etc complete all as specified and directed.

M & L for 40 mm thick (average), plain cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) as in flooring, etc mixed with water proofing compound as per manufacturer's instructions complete all as specified and directed. (Note: WPC sall be measured and paid seperately)

S & F in repairs 50 mm bore, Unplasticized PVC pipes of pressure rating 10 kgf/sq. cm fixed to walls, laid in floor etc complete all as specified and directed.

Supply only integral water proofing compound (ISI marked) complete all as specified and directed.

S & F in repairs Steel rolling shutters, 1.25mm thickness of laths, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: gear operated type with bevel gear box and crank handle complete all as specified and directed.

Demolition of cement concrete (unreinforced) in any position not otherwise specifically provided for as in roof padding etc including old detoriated roof treatment and bedding layer and removing debries and rubbish to a distance outside MD land complete all as specifed and directed.

M & L for 10 mm thick screed bed in CM 1:4 mixed with WPC as per manufacturer's instructions over 25 mm thick PCC 1:2:4 type B-0 (12.5mm graded aggregate), as in levellig course, Supply and lay polymeric water proofing membrane of weight 3kg/sq.m incorporating a centre core of 90 micron thick HMHDPE film including coating the surface with a coat of water based bituminous primer @ 100gms/sq.m., followed by a coat of blown bitumen of grade 85/25 or 90/15 @ 1.2kg/sq.m. each at top and bottom of the membrane including sealing all joints by thermo fusion with minium 10cm overlap incl grooving & inserting in parapt wall all as per manufacturers instructions complete all as specified and as directed. (Note: WPC shall be measured and paid seperately)

M & L for cement concrete tiles of size 25cm x 25cm x 22mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished, including 15 mm thick screed bed in cement mortar 1:6 and set & jointed in neat cement slurry and pointed in with mixture of white and grey cement equal proportion and no pigment complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness including cover fillets/snap grid etc complete all as specified and directed.

S & F GI frame work for suspended seamless false ceiling comprising of GI ultra perimeter channels of size 0.55 mm thick having one flange of 20 mm and another flange of 30 mm and a web of 27 mm alongwith perimeter of ceiling, screw fixed to brick wall/partition with the help of nylon sleeves and screws, at 610 mm centres. then suspending GI ultra intermidieate channels of size 45 mm, 0.9 mm thick with two flanges of 15 mm each from the soffit at 1220 mm centres with ultra ceiling angle of width 25mmx10mmx0.55 mm thick fixed to soffit with GI cleat and steel expansion fasteners. Ultra ceiling section of 0.55 mm thickness having knurled web of 51.5 mm and two flanges of 26 mm each with lips of 10.5 mm are then fixed to the ultra intermidieate channel with the help of connecting clips and in direction perpendicular to the ultra intermidieate channel at 457 mm centres including provn of 12 mm thick Gypsum board (Confirming to IS-2095-1982) fixing with screw mechanically either with screw driver or drilling machine with suitable attachment. Finally the boards are to be jointed and finished so as to have a flush look which includes filling & finishing theedges of the boards with jointing conmpound, paper tape and Preparing new surfaces and applying two coats of plastic emulsion paint over a coat of primer over one or more coat of wall care putty including rubbing with sand paper to obtain a smooth surface complete all as specified and directed.

S & F in repairs, 15mm bore, bib taps, two way with wall flange, fancy type cast copper alloy, chromium plated with handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. (Make: Jaquar Cat No. OPP-15041PM or equivelant of make as per list of manufacturer)

S & F in repair 15 mm bore, angular stop cock with wall flange, cast copper alloy, chromium plated, fancy type with handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. (Make: Jaquar Cat No. OPP-15053PM or equivelant of make as per list of manufacturer)

S & F in repair 15 mm bore, pillar taps, brass chromium plated, Single Lever screwed for iron pipe complete all as specified and directed. (Make: Jaquar Cat No. OPP-15001PM or equivelant of make as per list of manufacturer's)

S & F in repairs, CP, Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, onnecting Legs & Wall Flange (without Hand & Overhead Shower) complete all as specified and directed. (Make : JAQUAR, Cat No . FUS-29281 or equivelant of make as per list of manufacturer's)

S & F in repairs, Paper Holder with Flap Recessed Type (Stainless Steel) fixed to wall with brass screw complete all as specified and directed. (Make: Jaquar Cat No. AHS-1553 or equivelant of make as per List of manufacturer's)

S & F in repairs, Towel Rack 600mm long with Lower Hangers including Chromium plated brass screws and wooden/plastic cleats etc complete all as specified and directed. (Make: Jaquar Cat No. AQN-7781 or equivelant of make as per list of manufacturer's)

S & F in repairs, Single Towel Rail 600mm Long, Stainless Steel with brackets, fixed Chromium plated brass screws and wooden/plastic cleats etc complete all as specified and directed. (Make: Jaquar Cat No. ACN-1111SM or equivelant of make as per list of manufacturer's)

S & F in repairs, CP, Hand Shower ø140mm Round Shape Multi Flow with Air Effect (ABS Body & Face Plate Chrome Plated) with Rubit Cleaning System including flexible CP pipe and wall outlet with shower hook complete all as specified and directed. (Make : JAQUAR, Cat No . HSH-1729, SHA-566S & SHA-549D12 or equivelant of make as per list of manufacturer's)

S & F in repair Overhead Shower 200X200mm Square Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System complete all as specified and directed. (Make: Jaquar Cat No. OHS-35497 or equivelant of make as per list of manufacturer's)

S & F in repair 15 mm bore, Hand Shower (Health Faucet) with 8mm Dia, 1.2 Meter Long Flexible Tube & Wall Hook with N.R.V (Back Flow Preventer) with all accessories complete all as specified and directed. (Make: Jaquar Cat No. ALD-577 or equivelant of make as per List of manufacturer's)

S & F in repair Soap Dish Holder, fixed in walls with plugs & chromium plated brass screws complete all as specified and directed. (Make: Jaquar Cat No. AKP-35731P or equivelant of approved make)

S & F in repair Soap Dispenser with Glass bottle, brass chromium plated, fixed in walls with plugs & chromium plated brass screws complete all as specified and directed. (Make: Jaquar Cat No. AKP-35735P or equivelant of approved make)

S & F in repairs, Vitreous China wash basin, Counter Top Basin, of Size: 635x415x190 mm excluding taps but including CP waste coupling and bottle trap, CP fixed on granite slab complete all as specified and directed.(Make : Jaquar Cat No. ARS-WHT-39601 or equivalent of make as per List of manufacturer's)

S & F in repairs Vitreous China, Single piece-WC, Size: 365x655x765 mm, with UF soft close slim seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fittings, P Trap-180mm complete set and all fittings and fixtures including connection to outgoing drain including making good damaged/disturbed surfaces complete all as specified and directed. (Make: Jaquar LYS-WHT-38851P180UFSM or equivelant of make as per list of manufacturer's)

S & F in repair 32 mm dia Click Clack Waste 32mm Size Full Thread With 80mm Height complete all as specified and directed. (Make : Jaquar Cat No. ALD-727 or equivalent of make as per List of manufacturer's)

M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and smooth without using extra cement complete all as specified and directed.

M & L for preparing newly plastered surfaces of walls, etc and applying three coats of white wash complete all as specified and directed.

GVR CONSTRUCTIONS

SRI VENKATA SAI MANIKANTA CONSTRUCTIONS

SRI SAI SRINIVASA CONSTRUCTIONS