Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹31.5 Cr
EMD Value
₹31.5 L
Closing Date
11 Nov 2022, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
NBCC Bhawan
NBCC Bhawan
Development of existing bus station as a smart integrated Bus Terminus (4.5 acres) with 25000 Sqft commercial space at Puducherry
NBCC/CPG/IntegratedTerminus/Puducherry/2022/343~EW067dfd7a0f52fb5869562f60
NBCC/CPG/IntegratedTerminus/Puducherry/2022/343
Open Tender-Domestic
Civil Works General
NBCC Bhawan
₹59,000
₹31.5 L
11 Nov 2022
29 Oct 2022
11 Nov 2022
29 Oct 2022
11 Nov 2022
ABSTRACT OF COST
Cost As Per PSR Rate
SI Cost AS PER MARKET Total Amount (DSR
SI Cost AS PER MARKET Total Amount (DSR
Description 2021 Including GST @
No. RATE (RS.) +NS)
2 Water Supply and Plumbing Works 2,763,642.11 154,342.21 2,917,984.31
4 Fire Fighting System 6,687,501.57 6,687,501.57
ANUJ NAVNEET Digitally signed by ANUJ
CHACHA Date: 2022.10.29
NAME OF PROJECT : Development of existing bus station as a Smart Integrated Bus Terminus (4.5 acres) with 25000 sqft commercial space at
BILL OF QUANTITITES
S.No Description of Item Unit Quantity Rate Total Amount
S.No Description of Item Unit Quantity Rate Total Amount
1 2.31 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees andsaplings of Sqm 750.00 9.63 7,221.60
girth upto 30cm measured at a height of 1m above ground level and removal of rubbish upto a
distance of 50 m outside the periphery of the area cleared.
2 2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in Cum 3,048.41 161.59 492,590.52
foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including
dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated
soil and disposal of surplus excavated soil as directed, within a lead of 50 m for all kinds of soil
3 2.8.1 + As per Item 1 with Extra for every additional lift of 1.5 m or part thereof in excavation / banking -
2.26 excavated or stacked materials. All Kinds Of Soil
4 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in Cum 1,208.79 143.28 173,190.00
layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and
watering, lead up to 50 m and lift upto 1.5 m.
5 2.34.1 Supplying chemical emulsion in sealed containers including delivery as specified . Chlorpyriphos/ Liter 1,782.00 370.98 661,086.72
Lindane emulsifiable concentrate of 20%
6 2.35.3.1 Diluting and injecting chemical emulsion for POST - CONSTRUCTIONAL anti-termite treatment Sqm 4,997.52 191.58 957,449.18
(excluding the cost of chemical emulsion) - tratment of soil under existing flooors using
chemical emulsion @ one litre per hole, 300mm apart including drilling 12mm diametre holes
and plugging with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor -
with Chlorpyriphos / lindane E.C. 20% with 1% concentration -
7 2.27A.1 Supplying and filling with gravel (excluding rock) in trenches , plinth, sides of foundations etc . Cum 1,070.00 747.16 799,465.69
In layers not exceeding 20 cm in depth consolidating each deposited layers by ramming and
watering etc .complete including all lead and lift
8 15.2.2 Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) cum 711.00 818.07 581,648.05
9 15.3 Demolishing R.C.C work manually / by mechanical means including stacking of steel bars and Cum 946.00 2,011.92 1,903,279.73
disposal of unserviceable material within 50 metres lead
10 15.7.4 Demolishing brick work manually / by mechanical means including stacking of serviceable Cum 821.00 1,100.69 903,668.30
material and disposal of unserviceable material within 50 metres lead - in cement mortar
Dismantling tile work in floors and roofs laid in cement mortar including stacking material
within 50 metres lead - for thickness of tiles 10mm to 25mm
Dismantling steel work in built up sections in angles, tees, flats and channels including all
12 15.18 gusset plates, bolts, nuts, cutting rivets ,welding etc.including dismembering and stacking kg 44,154.00 3.09 136,506.51
within 50 metres lead
Dismantling doors, windows and clerestory windows (steel or wood) shutter including
13 15.12.2 chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead of area each 183.00 312.11 57,116.13
beyond 3 sq.metres
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material
within 50 metres lead of - G.S.sheet
Boring , providing and installation bored cast-in-situ reinforced cement concrete piles of grade
M-30 of specified diameter and length below pile cap,to carry a safe working load not less than
specified , excluding the cost of steel reinforcement but including the cost of boring with
bentonite solution and temporary casing of appropriate length for setting out and removal of
15 20.2A.1 same and the of the pile to be embedded in the pile cap etc. by Crawler mounted , telescopic Rmt 16,985.00 4,212.64 71,551,612.27
boom hydraulic pilling Rig all complete, including removal of excavated earth with all its lifts and
leads (length of pile for payment shall be measured up to bottom of pile cap). - 600 mm dia
piles - Using Slag Cement Note: Truck Mounted rotary / TMR / Tube well boaring machine shall
ANUJ NAVNEET Digitally signed by ANUJ
CHACHA Date: 2022.10.29
NAME OF PROJECT : Development of existing bus station as a Smart Integrated Bus Terminus (4.5 acres) with 25000 sqft commercial space at
BILL OF QUANTITITES
S.No Description of Item Unit Quantity Rate Total Amount
S.No Description of Item Unit Quantity Rate Total Amount
Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of
loading platform and preparation of pile head or construction of test cap and dismantling of test
cap after test etc. complete as per specification - Single pile above 50 tonne and upto 100 tonne
capacity -Initial test
Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of
loading platform and preparation of pile head or construction of test cap and dismantling of test
cap after test etc. complete as per specification - Single pile above 50 tonne and upto 100 tonne
capacity -Routine test
Supplying and filling in plinth with sand under floors, including watering, ramming,
consolidating and dressing complete.
Providing and laying sand gravel mix 1:1 of 150mm consolidated thickness using 0.68cum of
sand & 0.62cum of gravel for 1cum finished to a soaked CBR value of minimum 20 including
cost and conveyance of sand and gravel to the work site and stacking to the standard
departmental gauge for premeaurement, mixing the required quantities of sand and gravel,
spreading watering and consolidation the mix by power roller rolling to achive the required
proctor density including the labour charges for mixing, spreading, hire and fuel charges for
power roller and all other tools and plants employed etc., complete. As per clause no 401 of
MOT specification
1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone
aggregate 20 mm nominal size derived from natural sources
Providing and laying in position cement concrete of specified grade excluding the cost of
21 4.1.8 centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand) : 8 Cum 2,335.65 4,907.68 11,462,640.87
graded stone aggregate 40 mm nominal size)
Centering and shuttering including strutting , propping etc and removal of form for -
foundations, footings, bases of columns etc for mass concrete
Centering and shuttering including strutting , propping etc and removal of form for - Lintels ,
beams , plinth beams , girders , bressumers and catilevers
Centering and shuttering including strutting , propping etc and removal of form for - Columns ,
Pillars , Piers , Abutments , Posts and Struts
Centering and shuttering including strutting , propping etc and removal of form for - Suspended
floors , roofs , landings , balconies and access platform
Centering and shuttering including strutting , propping etc and removal of form for - Stairs ,
(excluding landings) except spiral -staircases
Centering and shuttering including strutting , propping etc and removal of form for - Walls (any
thickness ) including attached pilasters , butteresses , plinth and string courses etc.
Extra for additional height in centering , shuttering where ever required width adequate
bracing , propping etc. including cost of de - shuttering and decentering at all levels , over a
28 5.11.1 height of 3.5m, for every additional height of 1metre or part thereof (plan area to be Sqm 3,100.69 233.63 724,408.09
measured) - Suspended floors, roofs, landing , beams and balconies (Plan area to be
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-
30 grade made by block making machine with strong vibratory compaction and of approved size
and design / shape laid in required colour and pattern over and including 50mm thick
compacted bed of course sand , filling the joints with coarse sand etc. all complte
Providing and laying in position machine batched and machine mixed design mix M-30 grade
cement concrete for reinforced cement concrete work , using cement content as per approved
design mix , including pumping of concrete to site of laying but excluding the cost of centering ,
shuttering , finishing and reinforcement , including admixtures in recommended proportions as
per IS : 9103 to accelerate, retard setting of concrete , improve workability without impairing
strength and durability . Note:- Cement content considered in this item is @ 330 kg / cum.
Excess or less cement used as per design mix is payable or recoverable separately. - All work
upto plinth level - Using Portland Slag Cement
Add 10kg for using extra cement in the items of design mix over and above the specified
cement content therein - Using Portland Slag Cement
ANUJ NAVNEET Digitally signed by ANUJ
CHACHA Date: 2022.10.29
NAME OF PROJECT : Development of existing bus station as a Smart Integrated Bus Terminus (4.5 acres) with 25000 sqft commercial space at
BILL OF QUANTITITES
S.No Description of Item Unit Quantity Rate Total Amount
S.No Description of Item Unit Quantity Rate Total Amount
Providing and laying in position machine batched and machine mixed design mix M-30 grade
cement concrete for reinforced cement concrete work , using cement content as per approved
design mix , including pumping of concrete to site of laying but excluding the cost of centering ,
shuttering , finishing and reinforcement , including admixtures in recommended proportions as
per IS : 9103 to accelerate, retard setting of concrete , improve workability without impairing
strength and durability . Note:- Cement content considered in this item is @ 330 kg / cum.
Excess or less cement used as per design mix is payable or recoverable separately. - All work
above plinth level upto floor V level
Add 10kg for using extra cement in the items of design mix over and above the specified
cement content therein
Furnishing and placing reinforced cement concrete in superstructure as per drawing and
technical specifications - PSC grade M40 with a minimum cement content 430 kg / cum - Using
concrete mixer - for superstructure- height upto 5m including all machineries and formwork,
Steel reinforcement for R.C.C.work including straightening , cutting , bending , placing in
35 5.22.6 position and binding all complete upto plinth level - Thermo -Mechanically treated bars Fe - 500 Kg ###### 94.13 64,580,126.40
Steel reinforcement for R.C.C.work including straightening , cutting , bending , placing in
36 5.22A.6 position and binding all complete above plinth level - Thermo -Mechanically treated bars Fe -500 Kg ###### 94.13 16,230,723.43
Providing anticorrosive treatment to HYSD reinforcement with fusion bonded epoxy coating the
rate includes cost of anticorrosive coating including cost of powder , sand blasting, cleaning ,
37 5.22.8 induction , heating , depreciation of machinery etc, wastage in cut length of bars , provision of Tonne 537.25 15,397.14 8,272,092.47
wooden battens between rows of coated bars , cover to work bush pins / bar bending machines
etc - for bars of 20mm to 32 mm diametre - conforming to IS 13620 -1993
Providing anticorrosive treatment to HYSD reinforcement with fusion bonded epoxy coating the
rate includes cost of anticorrosive coating including cost of powder , sand blasting, cleaning ,
38 5.22.9 induction , heating , depreciation of machinery etc, wastage in cut length of bars , provision of Tonne 266.80 20,447.41 5,455,372.21
wooden battens between rows of coated bars , cover to work bush pins / bar bending machines
etc - for bars of 8mm to 16 mm diametre - conforming to IS 13620 -1993
Providing and fixing in position 12mm thick bitumen impregnated fiber board conforming to IS:
1838, including cost of primer, sealing compound Grade-A in expansion joints.
Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300mm
thick AAC blocks in sub structure upto plinth level with RCC band at sill level and lintel level with
approved block laying polymer modified adhesive mortar all complete .(The payment of RCC
band and reinforcement shall be made for seperately).
Supplying and applying bituminous solution primer on roof and / or wall surface at 0.24 litre per
Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement :2
coarse sand : 4 graded stone aggregate 20mm nominal size)
Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300mm
thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill
level and lintel level with approved block laying polymer modified adhesive mortar all complete
.(The payment of RCC band and reinforcement shall be made for seperately).
Provding and laying autoclaved aerated cement blocks masonry with 100mm thick AAC blocks in
superstructure above plinth level upto floor five level in cement mortar 1:4 (1 cement : 4 coarse
sand) . The rate includes providing and placing 50mm concrete band with 2 nos 6 mm dia
M.S.bars at every third course of masonry work.
Providing and fixing double glazed hermetically sealed glazing in aluminium windows,
ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap,
45 21.10 including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both sqm 34.00 3,535.36 120,202.33
primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-
charge complete.
Providing and fixing partition upto ceiling height consisting of G.I. frame with toughend glass
and required board, including providing and fixing of frame work made of special section power
46 9.105.1 pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm of 75 mm overall thickness Sqm - 1,717.02 -
partition with 12.5 mm thick double skin fire rated Glass Reinforced Gypsum (GRG) plaster
board conforming to IS: 2095: part 3 (Board with BIS certification marks)
47 13.1.1 Ceiling Plastering with 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) sqm 3,809.68 227.74 867,616.66
48 13.8.3 Inner Plastering with 12 mm cement plaster of mix 1:5 (1 cement : 5 fine sand) sqm 8,311.54 218.45 1,815,684.28
Outer Plastering With 18 mm cement plaster in two coats under layer 12 mm thick cement
49 13.12 plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement sqm 3,369.57 349.63 1,178,117.71
: 3 coarse sand) finished rough with sponge.
Extra for plastering done on moulding cornices or architraves including neat finish to line and
level - in one coat
Extra for plastering done on moulding cornices or architraves including neat finish to line and
level - in two coat
52 13.37.1 White washing with lime to give an even shade for New work Sqm 3,809.68 21.54 82,041.47
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to
prepare the surface even and smooth complete.
Applying one coat of water thinnable cement primer of approved brand and manufacture on
wall surface : Water thinnable cement primer
Wall painting with plastic emulsion paint Royal of approved brand and manufacture to give an
even shade - two or more coats on new work
Finishing walls with textured exterior paint of required shade - New work (Two or more coats
56 13.45.1 applied @ 3.28 ltr / 10 sqm ) over and including priming coat of exterior primer applied @ 2.20 Sqm 3,021.57 190.83 576,605.80
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more
57 13.46.1 coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ Sqm 348.00 130.40 45,379.83
2.20 kg/10 sqm)
ANUJ NAVNEET Digitally signed by ANUJ
CHACHA Date: 2022.10.29
NAME OF PROJECT : Development of existing bus station as a Smart Integrated Bus Terminus (4.5 acres) with 25000 sqft commercial space at
BILL OF QUANTITITES
S.No Description of Item Unit Quantity Rate Total Amount
S.No Description of Item Unit Quantity Rate Total Amount
Providing wood work in frames of doors , windows, clerestory windows and other frames,
58 9.1.2P wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia Cum 3.78 ###### 577,224.03
& length (hold fast lugs or dash fastener shall be paid for separately) -Padak wood
Providing and fixing panelled or panelled and glazed shutters for doors, windows, and
clerestory windows, including ISI marked M.S.pressed butt hinges bright finished of required
size with necessary screws, excluding panelling which will be paid for separately , all complete -
Padak wood - 35 mm thick shutters
Providing and fixing panelled or panelled and glazed shutters for doors, windows, and
clerestory windows, including ISI marked M.S.pressed butt hinges bright finished of required
size with necessary screws, excluding panelling which will be paid for separately , all complete -
Padak wood - 30 mm thick shutters
Providing and fixing panelled or panelled and glazed shutters for doors, windows, and clerestory
windows, including ISI marked M.S.pressed butt hinges bright finished of required size with
necessary screws, excluding panelling which will be paid for separately , all complete - Kiln
seasoned and chemically treated Vengai wood - 35 mm thick shutters
Providing and fixing bright finished brass butt hinges with necessary screws etc complete - 125
X 85 X 5.5 mm (heavy type)
Providing and fixing bright finished brass butt hinges with necessary screws etc complete - 100
X 85 X 5.5 mm (heavy type)
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc
complete - 200 x 10 mm
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc
complete - 150 x 10 mm
Providing and fixing bright finished brass door latch with necessary screws etc complete - 300 x
Providing and fixing bright finished brass door latch with necessary screws etc complete - 250 x
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a
pair of lever handles of approved quality with necessary screws etc. complete.
Providing and fixing bright finished brass hanging type floor door stopper with necessary
screws, etc. complete.
Providing and fixing aluminium extruded section body tubular type universal hydraulic door
closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to
80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with
necessary accessories and screws etc. complete.
Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer
particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type
71 9.129 ll), having one side decorative lamination and other side balancing lamination, including IInd Sqm 4.83 2,010.48 9,710.64
class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished
stainless steel piano hinges, complete as per direction of the Engineer-in-Charge
Providing and fixing special quality bright finished brass cupboard or ward robe locks with four
levers of approved quality including necessary screws etc complete - 50mm
73 9.81.1 Providing and fixing bright finished brass handles with screws etc complete - 125 mm Each 26.00 247.76 6,441.88
74 9.81.2 Providing and fixing bright finished brass handles with screws etc complete - 100 mm Each 2.00 207.61 415.22
Providing and fixing factory made uPVC white colour casement /casement cum fixed glazed
windows comprising of uPVC multi-chambered frame , sash and mullion(where ever required)
extruded profiles duly reinforced with 1.60 + or - 0.2 mm thick galvanized mild steel section
made from roll forming process of required length (shape & size according to uPVC profile),
uPVC extruded glazing beads of appropriate dimension , EPDM gasket , stainless steel (SS 304
grade) friction hinges , zinc alloy (white powder coated) casement handles, G.I fasteners 100 x
8 mm size for fixing frame to finished wall , plastic packers , plastic caps and necessary stainless
steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners,
mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's
and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall
shall be filled with weather proof silicon sealent over backer rod of required size and of
approved quality , all complete as per approved drawing.(Single / double glass panes and
silicon sealent shall be paid separately) - Casement window double panels with top fixed with
S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm , sash 47 x
68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 + or - 0.2mm and single glazing
bead of appropriate dimension . (Area of window upto 2.50 sqm)
Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators
comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles
duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming
process of required length (shape & size according to uPVC profile), , uPVC extruded glazing
beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to
finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of
frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also
fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After
fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof
silicon sealant over backer rod of required size and of approved quality, all complete as per
approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and
silicon sealant shall be paid separately) - Fixed window / ventilator made of (small series) frame
47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 + or -0.2 mm and single
glazing bead of appropriate dimension. (Area upto 0.75 sqm) Fixed window size - 1.20x0.50 m
ANUJ NAVNEET Digitally signed by ANUJ
CHACHA Date: 2022.10.29
NAME OF PROJECT : Development of existing bus station as a Smart Integrated Bus Terminus (4.5 acres) with 25000 sqft commercial space at
BILL OF QUANTITITES
S.No Description of Item Unit Quantity Rate Total Amount
S.No Description of Item Unit Quantity Rate Total Amount
Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness
of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2
Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to
77 9.11.9 be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal Rm 198.70 462.67 91,931.77
to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws
of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineerin-
Providing and fixing factory made panel PVC door shutter consisting of frame made out of
M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top
& bottom rails. M.S. frame shall have a coat of steel primers of approved make and
manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm
thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45
degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which
75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and
bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be
tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of
the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for
top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame
welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet
beadingon inner side, and joined together with solvent cement adhesive. An additional 5 mm
thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC
solvent adhesive etc. complete as per manufacturer's specification & drawing. 30 mm thick
plain PVC door shutters
Supplying and fixing rolling shutters of approved make, made of required size M.S.laths,
interlocked together through their entire length and jointed together at the end by end locks ,
mounted on specially designed pipe shaft with brackets, side guides and arrangements for
79 10.6.2 inside and outside locking with push and pull operation complete, including the cost of Sqm 482.40 3,253.54 1,569,509.24
providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel
wire of adequate strength conforming to ISS :4454 -part 1 and M.S.top cover of required
thickness for rolling shutters - 80 x 1.20mm M.S.laths with 1.25 mm thick top cover
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to
be specified by the manufacturer) , of approved make (Jhonson / Asian / Somany / Nitco) in all
colours , shades of size 300 x 450 mm as approved in skirting , risers of steps and dados, over
12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey
cement slurry @ 3.3 kg per sqm, including pointing in white cement with pigment of matching
shade complete - size 300x450 mm
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by
applying cement slurry mixed with water proofing cement compound consisting of applying : (a)
First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @
0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of
cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This
layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate
includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes
and masonry with polymer mixed slurry.
Providing and laying vitrified floor tiles of size 600 x600 mm (thickeness to be specified by the
manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved
82 11.41.2 make , in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse Sqm 1,554.00 1,278.99 1,987,550.77
sand) , including grouting the joints with white cement and matching pigments etc., complete -
size of tile600x600mm
Providing and laying flamed finish granite stone flooring in required design and patterns, in
linear as well as curvilinear portions of the building all complete as per the architectural
drawings with 18mm thick stone slab over 20mm (average) thick base of cement mortar 1:4 (1
83 8.12 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement Sqm 3,402.00 2,538.10 8,634,607.35
slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all
complete as specified and as - flamed finish granite stone slab Jet black , Cherry red, Elite
brown, Cat eye or equivalent
84 11.24 Extra for pre finished nosing to treads of steps of granite slabs. RM 148.00 452.42 66,958.72
Providing and laying soft Korean grass turfing including supplying red earth,manure, river
85 11.30 sand, labour charges for ground preparation spreading earth and manure transportation of all Sqm 1,755.00 955.29 1,676,538.51
and maintaining the lawn for initial three months etc. complete.
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to
be specified by the manufacturer) , of approved make (Jhonson / Asian / Somany / Nitco) in all
colours , shades of size 300 x 450 mm as approved in skirting , risers of steps and dados, over
12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey
cement slurry @ 3.3 kg per sqm, including pointing in white cement with pigment of matching
shade complete - size 300x450 mm
Providing & fixing in position Phenol bonded Bamboowood flooring with planks of sizes 14mm
thick ,1800mm length (minimum) and 130mm wide (minimum), in approved colour , texture
and finish , having Performance Appraisal Certificate (PAC) issued by Building Materials &
Technology Promotion Council (BMTPC) . The flooring shall be fixed with tongue and groove
87 27.1 interlocking system, with underlayment of 4mm thick expanded polyethylene Sqm - 5,919.92 -
foam sheets having density 40kg / cum, over prepared surface with necessary quarter round
planks of size 1900mm x 18mm and door reducer of size 1900mm x 44mm , wherever
required. The bamboo wood planks shall have minimum density of 1000 kg / cum & mimimum
Hardness 1000 Kgf. With Eco friendly UV coating , all complete .
ANUJ NAVNEET Digitally signed by ANUJ
CHACHA Date: 2022.10.29
NAME OF PROJECT : Development of existing bus station as a Smart Integrated Bus Terminus (4.5 acres) with 25000 sqft commercial space at
BILL OF QUANTITITES
S.No Description of Item Unit Quantity Rate Total Amount
S.No Description of Item Unit Quantity Rate Total Amount
Providing & fixing in position Phenol bonded Bamboo wood in wall skirting with planks of sizes
14mm thick, 1900mm length (minimum) and 85 mm wide (minimum) in approved colour ,
texture and finish , having Performance Appraisal Certificate (PAC) issued by Building Materials
88 27.2 &Technology Promotion Council (BMTPC). The skirting shall be fixed with SS screws & rawl Sqm - 5,715.99 -
plugs, over underlayment of 4mm thick, expanded poly ethylene foam sheets having 40 kg /
cum density over prepared surface. The bamboo wood planks shall have minimum density of
1000 kg / cum & minimum Hardness 1000 Kgf. With Eco friendly UV coating , all complete
Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat
89 13.48.2 applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved Sqm 700.00 115.25 80,675.42
brand and manufacture
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat
90 13.48.3 applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved Sqm 977.00 115.05 112,403.85
brand and manufacture.
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats,
91 9.48.1 square or round bars etc. including priming coat with approved steel primer all complete. Fixed Kg 12,154.48 153.72 1,868,369.65
to steel windows by welding .
Providing and fixing G.I.chain link fabric fencing of required width in mesh size 50 x 50 mm
including strengthening with 2mm dia wire or nuts , bolts and washers as required complete -
Made of G.I.wire of dia 4mm , PVC coated to achieve outer dia not less than 5mm in required
colour and shade
Lime concrete terracing on roofs of required thickness laid to fall with 25mm nominal size brick
93 12.20L aggregate and 50% lime mortar 1:2 (1 lime putty : 2 surkhi) rammed and finished with gur and Cum 42.00 6,415.83 269,464.66
belgiri treatment complete including rounding of junctions with Parapet wall complete
Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of
approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with
2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1
cement : 4 coarse sand) and finished neat complete.
Providing, laying and jointing UPVC pipes (0.4 Mpa)conforming to IS specification 4985 and ISI
marked including transportation to the site , lowering to the trenches, laying to proper grade
95 19.6.11 and alignment, testing of joints with required testing equipment,including cost of solvent Rm 202.50 467.17 94,602.69
cement , excluding UPVC specials such as bends , tees , threaded pieces , couplers , reducer ,
endcaps etc.,complete all as per IS and CPWD specification. - 160mm dia.
Providing and laying non - pressure NP2 class (light duty) R.C.C pipes with collars jointed with
96 19.6.11 stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing Rm 43.63 733.00 31,980.97
of joints etc.complete - 300 mm dia R.C.C. pipe
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and
approved quality - LD - 2.5 - square shape 450 mm internal dimensions
Supplying and fixing C.I. cover without frame for manholes :455x610 mm rectangular C.I. cover
(light duty) the weight of the cover to be not less than 23 kg
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry
mixed with water proofing cement compound consisting of applying: (a) after surface
preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement
compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is
still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5
99 22.6 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement Sqm 537.00 488.25 262,189.50
compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure
for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30
cm on parapet wall and tucked into groove in parapet all around.(d) fourth and final layer of
brick tiling with cement mortar (which will be paid for separately. For the purpose of
measurement the entire treated surface will be measured.
Structural steel work in single section, fixed with or without connecting plate, including cutting,
hoisting, fixing in position and applying a priming coat of approved steel primer all complete
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates
etc., including welding, grinding, buffing, polishing and making curvature (wherever required)
and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing
101 10.28 with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of KG 79.00 556.23 43,942.04
required size, on the top of the floor or the side of waist slab with suitable arrangement as per
approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members
shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer
coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or
with G.I. limpet washers filled with white lead, including a coat of approved steel primer and
102 12.1.3 two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ Sqm 105.00 704.12 73,932.37
vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including
cutting to size and shape wherever required 0.63 mm thick with zinc coating not less than 275
Providing & fixing UV stabilised fibre glass reinforced plastic sheet roofing upto any pitch,
including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia G.I.plain / bitumen
washers complete but excluding the cost of purlins , rafters ,trusses etc. The sheets shall be
manufactured out of 2400 TEX panel rovigs incorporting minimum 0.3% ultra -voilet stabiliser in
resin system under approximately 2400 psi and hot cured. They shall be of uniform
pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.
The sheets shall be opaque or translucent, clear or pigmented , textured or smooth as specified -
2mm thick corrugated (2.5" or 4.2 " or 6") or step-down (2" or 3" or 6") as specifed
ANUJ NAVNEET Digitally signed by ANUJ
CHACHA Date: 2022.10.29
NAME OF PROJECT : Development of existing bus station as a Smart Integrated Bus Terminus (4.5 acres) with 25000 sqft commercial space at
BILL OF QUANTITITES
S.No Description of Item Unit Quantity Rate Total Amount
S.No Description of Item Unit Quantity Rate Total Amount
Structural steel work riveted , bolted or welded in built up sections , trusses and framed work ,
104 10. 2 including cutting, hoisting , fixing in position and applying a priming coat of approved steel KG 37,463.00 94.26 3,531,202.44
primer all complete
"Design supply & installation of suspended Spider Glazing system designed to with stand the
wind pressure as per IS 875 (Part - III). The Suspended System held with Spider Fittings of SS -
316 grade Steel of approved manufacturer with glass panel having 12mm thick clear toughened
glass held together with SS - 316 Grade Stainless steel Spider & bolt assembly with laminated
glass fins 21 mm thick . The Glass fins and glass panel assembly shall be connected to slab /
beams by means of SS - 316 Grade stainless steel brackets & Anchor bolts and at the bottom
using SS channel of 50x25x2mm using fastener & anchor bolts , non staning weather sealants
of approved make, Teflon / nylon bushes and separators to prevent bimetallic contacts, all
complete to perform as per specification and approved drawings . The complete system to be
designed to accommodate thermal expansion & seismic movements etc . The joints between
glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled
with non staining weather sealant , so as to make the entire system fully water proof & dust
proof. The rate shall include all design, Engineering and shop drawing including approval from
structural designer , labour ,T&P , scaffolding , other incidental charges including wastage,
enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors,
SS channel laminated glass etc. all complete
"Providing , supplying fixing & cladding of sqm 4,799.22 aluminium rollcoated composite panel
3 mm thick material having more than 70 % of PVdf with all coatings not exceeding AAMA at
605.2-requirements , with anti-toxic low density polythene having aluminium coated with
chrome or polyester , polyvinylidien fluoride of HY lar 5000 in ausimont USA & kynar 500 in Elf -
Atosem will be fixed on the anodized aluminium extruded section strucutral frame for a wall
panelling work with required projection by using MS -cleats / angles / aluminium 'L' angles and
grooves , in ACP folding as per site requirement whereever necessary. The plain ACP folding will
be reinforced by using type system.
Sub Total SCHEDULE ITEMS (Civil Works) 289,889,347.92
NON SCHEDULE ITEMS
Providing & laying vacuum dewatered flooring (Tremix Floor) of RCC including providing side
shuttering with MS channels, vibrating concrete by using screed vibrator and suction dewatering
using approved make equipment and finishing the top surface to required level and grade using
power trowels of standard make. Rate to include for covering the finished concrete surface with
200 micron thick polythene sheet and curing. (Concrete & Reinforcement shall be measured and
paid separetely.)
Sub Total- NON SCHEDULE ITEMS (Civil Works) 1,005,242.00
WATER SUPPLY AND SANITARY ARRANGEMENTS -
Boring / drilling bore well of required dia for casing / strainer pipe, by suitable method
prescribed in IS : 2800 (part 1) , including collecting samples from different strata , preparing
1 24.1.1.1 and submitting strata chart /bore log, including hire & running charges of all equipments, tools , Rmt 180.00 338.90 61,001.28
plants & machineries required for the job, all complete - upto 90 metre depth below ground
level - all types of soil - 300 mm dia
Boring / drilling bore well of required dia for casing / strainer pipe, by suitable method
prescribed in IS : 2800 (part 1) , including collecting samples from different strata , preparing
2 24.2.1.1 and submitting strata chart /bore log, including hire & running charges of all equipments, tools Rmt 120.00 395.38 47,445.91
, plants & machineries required for the job, all complete - beyond 90 metre & upto 150 metre
depth below ground level -all types of soil - 300 mm dia
Supplying and lowering of UPVC 150mm dia Plain casing pipe confirming to IS:12818-1992
with relevant amendments with class designation CM and with minimum wall thickness of 7.5
3 30.29 mm as per I.S.Code into the bore well with proper vertical alignments etc. Including the cost of RM 200.00 1,144.68 228,936.52
materials , but excluding the cost of labour for positioning the assembly for lowering
purpose using contractor's rig
4 30.30 Extra for providing 3 mm slots in 150mm dia.UPVC casing pipes RM 100.00 62.29 6,229.22
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC
medium well casing (CM) pipe of required dia , conforming to IS:12818, including required hire
and labour charges, fittings & accessories etc. all complete , for all depths - 150 mm nominal
Supplying , filling , spreading & leveling stone boulders of size rage 5 cm to 20 cm,inrecharge
pit, in the required thickness, for all leads & lifts , all complete
Supplying, filling, spreading and levelling gravels of size range 5 mm to 10 mm , in the
7 24.6 recharge pit, over the existing layer of boulders , in required thickness for all leads and lifts , Cum 7.10 780.42 5,540.96
Gravel packing in tubewell construction in accordance with IS :4097, including providing
8 24.8 gravel fine / medium / coarse, in required grading and sizes as per actual requirement , of all Cum 7.10 811.56 5,762.05
Supplying of electrically operated wet type submersible motor and pumpset , AC 3 phase, 415
volts, 50 Hz, 2900-3000 RPM.The pump shall have brass impeller, high grade steel shaft with
sufficient stages having outlet size of 2"/2.5"/3" dia. to suit the borewell (150 / 200mm dia.),
complete.The rate includes, all taxes, freight, etc., FOR at site in UT of Puducherry. The
pumpset shall be guaranteed for a period of one year from the date of commissioning.(5 HP
Submersible motor and pumpset).
ANUJ NAVNEET Digitally signed by ANUJ
CHACHA Date: 2022.10.29
NAME OF PROJECT : Development of existing bus station as a Smart Integrated Bus Terminus (4.5 acres) with 25000 sqft commercial space at
BILL OF QUANTITITES
S.No Description of Item Unit Quantity Rate Total Amount
S.No Description of Item Unit Quantity Rate Total Amount
Supplying and fixing of fully automatic air break star-delta starter range for 5A to 13A
10 31.256.1A F.A.S.D. (Bharat Culter Hammer/L&T/Siemens make) with suitable M.S. angle frame etc., No 4.00 6,641.82 26,567.28
complete.- 5HP to 12.5 HP pumpsets
Supplying and fixing of 1x3x4 sqmm (single run) PVC insulated copper submersible flat flexible
cable of Finolex make complete.-upto 10HP pumpset
Providing, laying and jointing UPVC pipes (1 Mpa) conforming to IS specification 4985 and ISI
marked including transportation to the site, lowering to the trenches, laying to proper grade
12 31.160.1G and alignment, testing of joints with required testing equipment, including cost of solvent Rm 200.00 265.38 53,076.40
cement, excluding UPVC specials such as bends, tees, threaded pieces, couplers,
reducer,endcaps etc.,complete all as per IS and CPWD specification. - 75mm dia.
Providing, laying and jointing UPVC pipes (1 Mpa)conforming to IS specification 4985 and ISI
marked including transportation to the site , lowering to the trenches, laying to proper
13 31.160.1E grade and alignment, testing of joints with required testing equipment,including cost of solvent Rmt 94.00 125.93 11,837.38
cement,excluding UPVC specials such as bends,tees, threaded pieces, couplers,reducer,
endcaps etc.,complete all as per IS and CPWD specification. -50mm dia.
Providing, laying and jointing UPVC pipes (1 Mpa)conforming to IS specification 4985 and ISI
marked including transportation to the site , lowering to the trenches, laying to
proper grade and alignment, testing of joints with required testing
equipment,including cost of solvent cement,excluding UPVC specials such as bends,tees,
threaded pieces,couplers,reducer,endcaps etc.,complete all as per IS and CPWD
specification. - 75mm dia.
Providing, laying and jointing UPVC pipes (1 Mpa)conforming to IS specification 4985 and ISI
marked including transportation to the site , lowering to the trenches, laying to
proper grade and alignment, testing of joints with required testing
equipment,including cost of solvent cement,excluding UPVC specials such as bends,tees,
threaded pieces,couplers,reducer,endcaps etc.,complete all as per IS and CPWD specification. -
Providing, laying and jointing UPVC pipes (1 Mpa)conforming to IS specification 4985 and ISI
marked including transportation to the site , lowering to the trenches, laying to proper grade
and alignment, testing of joints with required testing equipment,including cost of solvent
cement,excluding UPVC specials such as bends,tees, threaded pieces,couplers,reducer,endcaps
etc.,complete all as per IS and CPWD specification. - 200mm dia.
Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including
17 19.35.1 collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 Rm 17.00 2,262.97 38,470.47
fine sand) including testing of joints etc. complete 450 mm dia RCC pipes
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS :
18 12.41.2 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for RM 197.80 306.25 60,575.34
thermal expansion, (i) Single socketed pipes. 110 mm diameter
Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for
unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with
seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion - bend 87.5 degree -
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for
unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing
with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain)-
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain
water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required
length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand)
and making good the wall etc. complete- 100mm
Providing and fixing gun metal gate valve with C.I.wheel of approved quality (Screwed end) -
25mm nominal bore
Providing and fixing gun metal gate valve with C.I.wheel of approved quality (Screwed end) -
32mm nominal bore
Providing and fixing gun metal gate valve with C.I.wheel of approved quality (Screwed end) -
40mm nominal bore
Providing and fixing gun metal gate valve with C.I.wheel of approved quality (Screwed end) -
50mm nominal bore
Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the
26 18.11.1 walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases metre 240.00 423.47 101,631.98
and making good the wall : 15 mm dia nominal bore
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701
27 18.48 marked , with cover and suitable locking arrangement and making necessary holes for inlet, Ltr 4,000.00 8.90 35,588.80
outlet and overflow pipes but without fittings and the base support for tank - Circular Tank
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm
Providing and fixing wash basin with C.I. brackets,15 mm C.P. brass pillar taps, 32 mm C.P.
brass waste of standard pattern, including painting of fittings and brackets, cutting and making
good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair
of 15 mm C.P. brass pillar taps
30 17.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make. Each 30.00 797.88 23,936.42
ANUJ NAVNEET Digitally signed by ANUJ
CHACHA Date: 2022.10.29
NAME OF PROJECT : Development of existing bus station as a Smart Integrated Bus Terminus (4.5 acres) with 25000 sqft commercial space at
BILL OF QUANTITITES
S.No Description of Item Unit Quantity Rate Total Amount
S.No Description of Item Unit Quantity Rate Total Amount
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of
430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with
31 17.4.1 standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, Each 10.00 4,480.96 44,809.56
including painting of fittings and brackets, cutting and making good the walls and floors
wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern
Providing and fixing white vitreous china pedestal type water closet (European type) with seat
and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings &
32 17.3.1 C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and Each 20.00 12,939.71 258,794.30
mosquito proof coupling of approved municipal design complete, including painting of fittings
and brackets, cutting and making good the walls and floors wherever required :
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast
Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with
33 17.1.1 manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures Each 12.00 4,652.46 55,829.48
complete, including cutting and making good the walls and floors wherever required:White
Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved
by Engineer in charge.
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of
35 18.74.2 approved quality and colour. 18.74.1 15 mm nominal bore with 30cm length 15 mm nominal Each 36.00 81.90 2,948.54
bore with 45 cm length
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved
quality conforming to IS:8931 15mm nominal bore
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
25 mm nominal bore
Providing and fixing on wall / column face unplasticed - PVC soil and waste pipes (type - B)
38 19.33.1 conforming to IS : 13592- 1992 including jointing with seal ring conformation to IS : 5382 metre 122.16 355.10 43,378.70
leaving 10mm gap for thermal expansion - single socked pipes -110mm diametre
Providing and fixing on wall / column face unplasticed - PVC soil and waste pipes (type - B)
39 19.33.2 conforming to IS : 13592- 1992 including jointing with seal ring conformation to IS : 5382 metre 196.26 217.47 42,681.45
leaving 10mm gap for thermal expansion - single socked pipes -75mm diametre
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick
masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the
40 19.4.1.1 weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per Each 10.00 1,574.77 15,747.69
standard design: 100x100 mm size P type With common burnt clay F.P.S. (non modular)
bricks of class designation 7.5
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot
& cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with
clamps at 1.00 m spacing. This includes jointing of pipes & fittings , with one step CPVC
solvement cement and the cost of cutting chases and making good the same including testing
of joints complete - Concealed work , including cutting chases and making good the wall etc -
32 mm nominal outer dia pipes
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot
& cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with
clamps at 1.00 m spacing. This includes jointing of pipes & fittings , with one step CPVC
solvement cement and the cost of cutting chases and making good the same including testing
of joints complete - Concealed work , including cutting chases and making good the wall etc -
25 mm nominal outer dia pipes
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot
& cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with
clamps at 1.00 m spacing. This includes jointing of pipes & fittings , with one step CPVC
solvement cement and the cost of cutting chases and making good the same including testing
of joints complete - Concealed work , including cutting chases and making good the wall etc -
32 mm nominal outer dia pipes
Providing and fixing Chlorinated Polyvinnyl Chloride (CPVC) pipes, having thermal stability for
hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the
44 18.7.5 pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC Rmt 85.00 510.55 43,396.80
solvent cement and testing of joints complete - internal work - exposed on wall - 40mm nominal
outer dia pipes
Providing and fixing Chlorinated Polyvinnyl Chloride (CPVC) pipes, having thermal stability for
hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the
45 18.7.6 pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC Rmt 100.00 383.45 38,345.28
solvent cement and testing of joints complete - internal work - exposed on wall - 50mm nominal
outer dia pipes
ANUJ NAVNEET Digitally signed by ANUJ
CHACHA Date: 2022.10.29
NAME OF PROJECT : Development of existing bus station as a Smart Integrated Bus Terminus (4.5 acres) with 25000 sqft commercial space at
BILL OF QUANTITITES
S.No Description of Item Unit Quantity Rate Total Amount
S.No Description of Item Unit Quantity Rate Total Amount
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1
cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm
bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1
cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary
excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40
mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12
mm thick, finished with a floating coat of neat cement complete as per standard design :With
common burnt clay F.P.S.(non modular) bricks of class designation 7.5
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4
(1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160
mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1
cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary
excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40
mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12
mm thick, finished with a floating coat of neat cement complete as per standard design :With
common burnt clay F.P.S.(non modular) bricks of class designation 7.5
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved
48 17.31 quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass Each 24.00 1,529.65 36,711.50
screws and washers complete.
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm,
height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
50 18.22.1 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter Each 7.00 833.07 5,831.48
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP
brass screws with concealed fittings arrangement of approved quality and colour600 mm long
towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing
not less than 190 gms
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved
make conforming to IS:8931. 15 mm nominal bore
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I.
brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and
making good the walls wherever required :Kitchen sink with drain board 510x1040 mm bowl
Sub Total SCHEDULE ITEMS (Water Supply and Plumbing Works) 2,763,642.11
ANUJ NAVNEET Digitally signed by ANUJ
CHACHA Date: 2022.10.29
NAME OF PROJECT : Development of existing bus station as a Smart Integrated Bus Terminus (4.5 acres) with 25000 sqft commercial space at
BILL OF QUANTITITES
S.No Description of Item Unit Quantity Rate Total Amount
S.No Description of Item Unit Quantity Rate Total Amount
Providing and fixing on wall face / column face unplasticised - PVC moulded fittings /
1 MR accessories for unplasticisd - PVC soil and waste pipes conforming to IS : 14735 -1999 including - - -
jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion -
(i) Door bends Each 15.00 164.19 2,462.78
(ii) plain bends Each 15.00 176.63 2,649.51
(iii) Plain tee Each 19.00 287.35 5,459.72
(i) Door bends Each 15.00 141.19 2,117.81
(ii) plain bends Each 19.00 120.31 2,285.94
(iii) Plain tee Each 19.00 181.70 3,452.23
2 MR Providing and Fixing of PVC floor trap 75 MM Each 64.00 791.78 50,673.92
Supplying and fixing of 5 Hp Diesel Water Pumping Set WV30D has Engine type of Air-cooled,
3 MR Displacement of 296 cc, Recoil Engine starting system with Tubular frame. The Material Type is No 2.00 36,580.00 73,160.00
aluminum and it is recoil start type.
Sub Total NON SCHEDULE ITEMS (Water Supply and Plumbing Works) 154,342.21
ELECTRICAL WORKS -
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories , and providing
1 5.2 masonry enclosure with cover plate having locking arrangement and watering pipe etc. with Each 4.00 6,003.79 24,015.17
charcoal / coke and salt as required
Earthing with G.I.earth plate 600 mm x 600 mm x 6 mm thick including accessories, and
2 5.4 providing masonry enclosure with cover plate having locking arrangement and watering pipe of Each 4.00 6,852.40 27,409.61
2.7 meter long etc.but without charcoal / coke and salt as required
Supplying and laying 6 SWG G.I. wire at 0.50 meter below ground level for conductor earth
electode , including connection / termination with GI thimble etc. as require
Supplying and laying 25 mm x 5 mm copper strip at 0.50 metre below ground as strip earth
electrode , including connection / terminating with nut , bolt, spring , washer etc.as required.
(Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer
spached at 50mm)
Supplying and laying 25 mm x 5 mm G.I strip at 0.50 meter below ground as strip earth
electrode , including connection / terminating with G.I. nut , bolt, spring , washer etc.as
required. (Jointing shall be done by overlapping and with 2 sets of G.I.nut bolt & spring washer
spached at 50mm)
Providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc as
Providing and fixing 25mm x 5mm GI.strip on surface or in recess for connections etc . as
Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as
Supplying and fixing following way , single pole and neutral , sheet steel , MCB disribution
board , 240 V, on surface / recess , complete with tinned copper bus bar , neutral bus bar ,
earth bar , din bar , interconnections , powder painted including earthing etc. as required (But
without MCB / RCCB / Isolator) -12 way (4+36) , double door
Wiring or light point / fan point / exhaust fan point / call bell per point with 1.5 sq.mm FRLS
PVC insulated copper conductor single core cable in surface / recessed medium class pvc
conduit , with modular switch, modular plate, suitable GI box and earthing the point with 1.5
sq.mm FRLS PVC insulated copper conductor single core cable etc.as required - GROUP C
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single
core cable in surface / recessed medium class PVC conduit , 2 way modular switch , modular
plate , suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper
conductor single core cable etc.as required
Wiring for group controlled (looped) light point / fan point / exhaust fan point / call bell point
(without indepdent switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single
core cable in surface / recessed PVC conduit , and earthing the point 1.5 sq.mm FRLS PVC
insulated copper conductor single core cable etc.as required - Group C
Supplying and fixing following modular switch / socket on the existing modular plate & switch
box including connections but excluding modular plate etc. as required - 5/6 A switch
Supplying and fixing following modular switch / socket on the existing modular plate & switch
box including connections but excluding modular plate etc. as required - 15/16 A switch
Supplying and fixing following modular switch / socket on the existing modular plate & switch
15 1.24.4 box including connections but excluding modular plate etc. as required - 3 pin 5/6 A socket Each 220.00 109.57 24,106.46
ANUJ NAVNEET Digitally signed by ANUJ
CHACHA Date: 2022.10.29
NAME OF PROJECT : Development of existing bus station as a Smart Integrated Bus Terminus (4.5 acres) with 25000 sqft commercial space at
BILL OF QUANTITITES
S.No Description of Item Unit Quantity Rate Total Amount
S.No Description of Item Unit Quantity Rate Total Amount
Supplying and fixing following modular switch / socket on the existing modular plate & switch
16 1.24.5 box including connections but excluding modular plate etc. as required - 6 pin 15/16 A Each 101.00 190.38 19,228.50
Supplying and fixing following modular switch / socket on the existing modular plate & switch
17 1.24.6 box including connections but excluding modular plate etc. as required - Telephone socket Each 60.00 116.30 6,978.05
Supplying and fixing following modular switch / socket on the existing modular plate & switch
18 1.24.7 box including connections but excluding modular plate etc. as required - TV antenna socket Each 13.00 116.64 1,516.36
Supplying and fixing following size / modules , GI box alongwith modular base & cover plate for
modular switches in recess etc. as required - 1 or 2 module (75mm x 75mm)
Supplying and fixing following size / modules , GI box alongwith modular base & cover plate
for modular switches in recess etc. as required - 3 module (100mm x 75mm)
Supplying and fixing following size / modules , GI box alongwith modular base & cover plate
for modular switches in recess etc. as required - 4 module (125 mm x 75 mm)
Supplying and fixing following size / modules , GI box alongwith modular base & cover plate
for modular switches in recess etc. as required - 6 module (200 mm x 75 mm)
Supplying and fixing following size / modules , GI box alongwith modular base & cover plate for
modular switches in recess etc. as required - 8 module (125 mm x 125 mm)
Supplying and fixing following size / modules , GI box alongwith modular base & cover plate for
modular switches in recess etc. as required - 12 module (125 mm x 125 mm)
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in
25 1.21.1 surface/recess including cutting the wall and making good the same in case of recessed conduit Meter 875.00 79.01 69,136.20
as required. 20mm
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in
26 1.21.2 surface/recess including cutting the wall and making good the same in case of recessed conduit Meter 775.00 95.10 73,699.56
as required. 25mm
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in
27 1.21.3 surface/recess including cutting the wall and making good the same in case of recessed conduit Meter 1,075.00 122.22 131,391.23
as required. 32mm
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in
28 1.21.4 surface/recess including cutting the wall and making good the same in case of recessed conduit Meter 875.00 156.76 137,167.63
as required. 40mm
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in
29 1.21.5 surface/recess including cutting the wall and making good the same in case of recessed conduit Meter 775.00 204.19 158,245.08
as required. 50mm
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC
30 1.14.1 insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as Meter 755.00 143.17 108,092.90
required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC
31 1.14.2 insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as Meter 1,620.00 170.12 275,595.37
required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC
32 1.14.3 insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as Meter 1,200.00 203.51 244,217.52
required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC
33 1.14.4 insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as Meter 1,000.00 273.94 273,937.00
required 2 X 6 sq. mm + 1 X 6 sq. mm earth wire
34 1096 1200mm sweep double ball bearing ceiling fan Make:Almonard/Usha Each 138.00 1,652.00 227,976.00
Installation , testing and commissioning of ceiling fan , including wiring the down rods of
35 1.44 standard length (upto 30 cm) with 1.5 sq.mm FRLS PVC insulated , copper conductor , single Each 138.00 1,314.54 181,407.02
core cable etc as required
36 1098 300mm 1400 rpm heavy duty exhaust fan Make:Almonard/Orient/Usha Each 29.00 2,761.20 80,074.80
Installation of exhaust fan in the existing opening , including making good the damage ,
connection , testing , commissioning etc. as required - Upto 450 mm sweep
Supplying, Installation, testing and commissioning of 2 Tonne A.C 3 Star Rating including
cost of material, labour etc., complete.
Supplying, Installation, testing and commissioning of Geyser/Water Heater including cost
39 1111 of material, labour etc., complete.25 ltrs. Storage water heater- ABS Make: Almonard/Venus/V- Each 7.00 8,260.00 57,820.00
Supplying and installing following size of perforated Hot dipped Galvanised iron cable tray
(galvanization thickness not less than 50 microns) with perforation not more than 17.5% , in
convenient sections , joined with connectors , suspended from the ceiling with G.I.suspenders
including G.I.bolts & nuts , etc .as required - 450 mm width
Supplying and installing following size of perforated Hot dipped galvanised iron cable tray
"bends" (galvanisation not less than 50 microns) with perforation not more than 17.5% , in
convenient sections , joined with connectors , suspended from the ceiling with G.I.suspenders
including G.I. bolts & nuts , etc.as required - 450 mm width x 50 mm depth x 2.0 mm thickness
Supplying and installing following size of perforated Hot dipped galvanised iron cable tray
"Tee" (galvanisation not less than 50 microns) with perforation not more than 17.5% , in
convenient sections , joined with connectors , suspended from the ceiling with G.I.suspenders
including G.I.bolts & nuts . As required - 450 mm width x 50 mm depth x 2.0 mm thickness
ANUJ NAVNEET Digitally signed by ANUJ
CHACHA Date: 2022.10.29
NAME OF PROJECT : Development of existing bus station as a Smart Integrated Bus Terminus (4.5 acres) with 25000 sqft commercial space at
BILL OF QUANTITITES
S.No Description of Item Unit Quantity Rate Total Amount
S.No Description of Item Unit Quantity Rate Total Amount
Supplying and installing following size of perforated Hot dipped galvanished iron cable tray
"Cross member" (galvanisation not less than 50 microns) with perforation not more than 17.5%
43 4.9.6 , in convenient sections , joined with connectors , suspended from the ceiling with Each 8.00 3,052.93 24,423.45
G.I.suspenders including G.I.bolts & nuts , etc .as required - 450 mm width x 50 mm depth x
2.0 mm thickness
Supplying and installing following size of perforated Hot dipped galvanised iron cable tray
"Reducer" (galvanisation not less than 50 microns) with perforation not more than 17.5% ,in
convenient sections , joined with connectiors , suspended from the ceiling with G.I.suspenders
including G.I.bolts & nuts , etc.as required - 450 mm width x 50 mm depth x 2.0 mm thickness
Supply and erection MS swaged tublar pole with base plate and single ornamental bracket two
coats coats of zinc chromate and two coats of aluminium / epoxy painting. Pole height-8 mt.
Pole dimension 139.7 x 4.5 x 4500mm , 114.3 x 3.65 x 1750mm, 88.9 x 3.25mm x 1750mm,
bracket dimension 60.3 X 3.65mm x 2700mm - 1no, base plate dimension 300mm x 300mm x
45 17.2.2 5mm, overall height - 9.5mts including excavation of earth column- 750x 750 x1650mm and No 30.00 29,489.34 884,680.34
cement concrete 1: 2: 4 of volume 750 x750 x 1650mm filling and capping above ground level
450mm dia x 600mm height. One coat of zinc chromate and two coat of aluminium / epoxy
painting should be done after erection of the pole and inclusive of suitable length 1.25mt.- 2
nos. of 40mm dia medium class GI pipe for cable raising as required.
Supply and erection MS swaged tublar pole at top with base plate and double ornamental
bracket two coats of zinc chromate and two coats of aluminium / epoxy painting. Pole height -
8mt. Pole dimension - 139.7 x 4.5 x 4500mm , 114.3 x 3.65 x 1750mm, 88.9 x 3.25mm x
1750mm, bracket dimension 60.3mm x 3.65mm x 2700mm - 2no, base plate dimension 300mm
46 17.2.7 x 300mm x 5mm. Overall height - 9.5mts. including excavation of earth 750x 750 x1650mm and No 3.00 31,254.35 93,763.06
cement concrete 1: 2: 4 of volume 750 x750 x 1650mm filling and capping above ground level
450mm dia x 600mm height. One coat of zinc chromate and two coat of aluminium/epoxy
painting should be done after erection of the pole and inclusive of suitable length 1.25mt.- 2
nos. of 40mm dia medium class GI pipe for cable raising
Supply and installation of 16 mtrs. High mast system with its accessories mast shaft shall be in
two sections , hot dip galvanised (as per BS 729 or equivalent) and suitable for wind velocity as
per IS 875-1987 (180 km /hour). It shall also include accessories for high mast including head
47 17.3.2 frame, stainless steel wire rope 6mm dia (7/19 construction) double drum per winch , which No 1.00 ###### 422,179.42
galvanized lantern carriage arrangement suitable for 12 (twelve) luminaries symmetrically and
its motorised control gear boxes and lighting final. (as per detailed technical specification as
shown in annexure - II)
48 1207 Supply of 48W LED Street Light Fitting No 36.00 6,525.40 234,914.40
Supply of 250w MH Street light aesthetically designed die cast aluminium with POT optics and
toughened flat glass cover (IP 65) Make:Philips
Fixing testing and commissioning of Sodium vapour / Mercury vapour / Metal halide street light
fittings on existing poles as required
Supplying of 3 phase, 415 volts, 50 cycles, 0.8 power factor for electric starting diesel generator
comprising the following units:- (Kirloskar/Leyland/Ruston/ Greaves Cotton/ Cummins make)
water cooled and shall be of multi stroke, multi cylinders, cold starting, developing not less than
309 BHP under normal temperature and pressure. The engine shall conform to I.S. 10002 with
latest amendments. It shall be capable of taking 10% over load for one hour in every 12 hours
of continous operation including 6 Nos. of anti vibration pads.The engine shall be complete with
the following accessories:Electrical starting provision, engine cooling fan, fuel and lubricating oil
filters, oil bath, air filter, lub oil pressure gauge 400 litres capacity fuel tank mounted with
engine, hour meter with exhaust manifold, flexible pipe, 12 /24 volts electric starting equipment
complete with starter, alternator and two numbers of 12 volts with 25 plates battery (with
Guarantee cards) of adequate capacity and low lubricating oil pressure/high temperature
varying engine shut down devices.
The Acoustic enclosure shall have the following: Acoustic enclosure shall be powder coated and
fabricated out of 16 SWG CRCA MS sheet. The silent canopy shall be of nut bolt type
construction. Powder coating is done after seven tank surface preparation process of sheet
metal. Canopy panel and doors shall have inside lining of FIRE-RETARDANT foam/Rock Wool as
acoustic material. Four hinged doors shall be provided to canopy, one door shall have glass
window for control panel.Base frame is fabricated either in ISMC channel or in sheet metal. The
base frame is rugged in construction and designed for mounting engine and alternator, with
cross members mounted on AVM. The base frame shall have provision for mounting of acoustic
enclosure and it is having provision of lifting hook for convenient lifting of complete set, i.e.
along with canopy, engine and alternator.Fuel tank shall be fabricated out of 14 SWG CRCA MS
sheet and is part of base frame. It is duly painted and fitted with inlet and outlet connections of
suitable capacity.The Acoustic enclosure shall be Type test approved as per CPCB norms. The
average sound level, when measure in green field condition (ISO m3744 OR 8528 PT 10) at 1-
meter distance from all four sides shall be less than 75-dBA average or as per CPCB norms. The
average stabilized hot air temperature rise with in the canopy is maintained with in 10 C over
and above ambient temperature.Acoustic enclosure is suitable for Outdoor / Indoor installation.
Lockable doors shall be provided. Lockable fuel filling arrangement to be provided external to
the canopy. Residential Silencer is housed in the canopy.
ANUJ NAVNEET Digitally signed by ANUJ
CHACHA Date: 2022.10.29
NAME OF PROJECT : Development of existing bus station as a Smart Integrated Bus Terminus (4.5 acres) with 25000 sqft commercial space at
BILL OF QUANTITITES
S.No Description of Item Unit Quantity Rate Total Amount
S.No Description of Item Unit Quantity Rate Total Amount
The exhaust gasses shall be taken out through a suitable flexible pipe to prevent any back
pressure on the engine.Base frame sturdy, fabricated welded construction, channel iron / sheet
metal base frame for mounting the above engine and alternator.Standard Tools and
Spares:Double ended spanners complete set (small and big size sets) - 12 Nos.Screw driver
(30cm long) Taparia make .Screw driver (45cm long) Taparia make .Cutting plyer.Diesel filter
with elements - 2 Nos.Oil filter with elements - 1 No.All the above accessories with complete
set.AlternatorThe alternator shall be of self excited, self regulated, screen protected, drip proof
alternator with static excitation system capable of developing 250 KVA at 0.8 power factor 415
volts, 3 phase, 50 cycles, generally conforming to I.S.4722 under normal condition, the voltage
regulation will be plus or minus 5% of rated voltage. It shall be with end shield/ball roller
bearings complete.Control PanelA wall/pedestal mounting (cubical type ) fabricated sheet steel
construction suitable for manual operation, rated for system output incorporating the following
devices/instruments. The panel is made of 1.6mm sheet with one/two hinged front door, bolted
back totally enclosed and vermine proof. It shall be with all electrical connections and internal
copper wiring with proper color codings for internal wiring. All control equipments and
indicating instruments shall be mounted on the control panel. The control panel shall have the
following equipments:1 No. mps/Volt/Frequency meter (96mm x 96 mm) 3 Nos. of suitable
current transformers2 Nos. of suitable selector switches for voltmeter and ammeter main switch
rotary type on/off pilot lamp (Standard make).1 No. input terminal board.1 No. out put terminal
board1 No. Kilowatt hour meter (62.5 KVA and above)1 No. MCCB of suitable capacity
L&T/CROMPTON make)-250 KVA /
Sub Total- SCHEDULE ITEMS (Electrical Works) 7,944,211.90
NON-SCHEDULE ITEM
1 MR Supply and Fixing of meters for shops including cost of material, labour etc., complete. Nos 44.00 5,900.00 259,600.00
Supplying, Installation, testing and commissioning of 36Watt LED Ceiling light including cost
of material, labour etc., complete.
Supplying, Installation, testing and commissioning of 20Watt 4 Feet LED Tube Light
including cost of material, labour etc., complete.
Supply, Transportation unloading, installation, testing and commissioning of Main EB Cutout
Box comprising of the followings and including all other accessories etc., 3 Nos 300 Amps
4 MR Porcelain fuse carriers, 1 No, Neutral link, 1 No Earth link Suitable Incoming and Outgoing Set 1.00 4,720.00 4,720.00
terminal to connect cable and Busbars, in a suitable M.S Enclouser with proper locking/ sealing
Supply, Transportation unloading, installation, testing and commissioning of Main Panel
comprising of the followings and including all other accessories etc., EB Incomer : 1 No 160A
4Pole MCCB DG Incomer: 1 No 160A 4Pole MCCB Busbar: 160A TPN Aluminium Busbars 35KA
per 1 Sec. All the neutral busbars shall have half the capacity of phase busbars Outgoing : 4
Nos 63 A TPN MCCB with releases , 1 No 100 A TPN MCCB with releases , 1 Set of RYB
indication lamp , Wall mounting type fabricated with 16 SWG CRCA sheet enclosure. Door and
partition 18 SWG CRCA Sheet. The Panel shall be complete with suitable interconnections and
earthing etc. All doors should have proper locking/sealing arrangements.
Supply, Transportation unloading, installation, testing and commissioning of EB Metering
Panel-1 comprising of the followings and including all other accessories etc., 3 Nos 63 A
Porcelain fuse carrier, 1 No Neutral link, 1 No E ; a) Compartment type outgoing 1 Nos-3 Phase.
Each outgoing shall have 1 metering portion with a provision of 6mm thick hylem sheet to fix
the E.B meter (3 Phase). 1 switch compartment shall have 3 Nos 32A porcelain fuse carriers, 1
No 40A TPN MCCBarth link, 1 set of RYB Indication lamp ; Burbar: 40A TPN Alumnium Busbars
; b) Compartment type outgoing 10 Nos-Single Phase. Each outgoing shall have 1 metering
portion with a provision of 6mm thick hylem sheet to fix the E.B meter (1 Phase). 1 switch
compartment shall have 2 Nos 16A porcelain fuse carriers, 1 No 16A DP MCB ; The Panel should
be complete with suitable interconnections and earthing etc.,
Supply, Transportation unloading, installation, testing and commissioning of EB Metering
Panel-2 comprising of the followings and including all other accessories etc., 3 Nos 63 A
Porcelain fuse carrier, 1 No Neutral link, 1 No Earth link, 1 set of RYB Indication lamp ; Burbar:
40A TPN Alumnium Busbars ; a) Compartment type outgoing 2 Nos-3 Phase. Each outgoing
shall have 1 metering portion with a provision of 6mm thick hylem sheet to fix the E.B meter (3
Phase). 1 switch compartment shall have 3 Nos 32A porcelain fuse carriers, 1 No 40A TPN MCCB
; b) Compartment type outgoing 11 Nos-Single Phase. Each outgoing shall have 1 metering
portion with a provision of 6mm thick hylem sheet to fix the E.B meter (1 Phase). 1 switch
compartment shall have 2 Nos 1 . The Panel should be complete with suitable interconnections
and erthing etc., 6A porcelain fuse carriers, 1 No 16A DP MCB
Supply, Transportation unloading, installation, testing and commissioning of EB Metering
Panel-3 comprising of the followings and including all other accessories etc., 3 Nos 63 A
Porcelain fuse carrier, 1 No Neutral link, 1 No Earth link, 1 set of RYB Indication lamp ; Burbar:
40A TPN Alumnium Busbars ; a) Compartment type outgoing 1 Nos-3 Phase. Each outgoing
shall have 1 metering portion with a provision of 6mm thick hylem sheet to fix the E.B meter (3
Phase). 1 switch compartment shall have 3 Nos 32A ; b) Compartment type outgoing 12 Nos-
Single Phase. Each outgoing shall have 1 metering portion with a provision of 6mm thick hylem
sheet to fix the E.B meter (1 Phase). 1 switch compartment shall have 2 Nos 16A porcelain fuse
carriers, 1 No 16A DP MCBporcelain fuse carriers, 1 No 40A TPN MCCB The Panel should be
complete with suitable interconnections and earthing etc.,
ANUJ NAVNEET Digitally signed by ANUJ
CHACHA Date: 2022.10.29
NAME OF PROJECT : Development of existing bus station as a Smart Integrated Bus Terminus (4.5 acres) with 25000 sqft commercial space at
BILL OF QUANTITITES
S.No Description of Item Unit Quantity Rate Total Amount
S.No Description of Item Unit Quantity Rate Total Amount
Supply, Transportation unloading, installation, testing and commissioning of EB Metering
Panel-4 comprising of the followings and including all other accessories etc., 3 Nos 63 A
Porcelain fuse carrier, 1 No Neutral link, 1 No Earth link, 1 set of RYB Indication lamp Burbar:
40A TPN Alumnium Busbars ; a) Compartment type outgoing 1 Nos-3 Phase. Each outgoing
shall have 1 metering portion with a provision of 6mm thick hylem sheet to fix the E.B meter (3
P ; b) Compartment type outgoing 8 Nos-Single Phase. Each outgoing shall have 1 metering
portion with a provision of 6mm thick hylem sheet to fix the E.B meter (1 Phase). 1 switch
compartment shall have 2 Nos 16A porcelain fuse carriers, 1 No 16A DP MCBhase). 1 switch
compartment shall have 3 Nos 32A porcelain fuse carriers, 1 No 40A TPN MCCB ; The Panel
should be complete with suitable interconnections and earthing etc.,
Supply, Transportation unloading, installation, testing and commissioning of First floor Panel
comprising of the followings and including all other accessories etc., Incomer: 1 No 100A
Porcelain Fuse carriers, 1No Neutral link, 1 No Earth link Outgoing: 6 Nos 40A TPN MCCB, 2 Nos
10 MR 63A TPN MCCB Burbar: 100A TPN Alumnium Busbars Wall mounting type fabricated with 16 Set 1.00 ###### 112,100.00
SWG CRCA sheet enclouser, Door and partition 18 SWG CRCA sheet. The Panel shall be
complete with iterconnections and earthing etc., All door should have proper locking/ sealing
Supply, Transportation unloading, installation, testing and commissioning of Phase
Segregated lighting 6Way DB comprising of the followings and including all other
accessories etc., Incomer: 1 No 40A TPN MCCB Outgoing: 3 Nos 32A DP MCB, 18 Nos 6/16A SP
MCB The Panel shall be complete with iterconnections and earthing etc.,
Supply, Transportation unloading, installation, testing and commissioning of Phase
Segregated lighting 4Way DB comprising of the followings and including all other
accessories etc., Incomer: 1 No 32A TPN MCCB Outgoing: 3 Nos 25A DP MCB, 12 Nos 6/16A SP
MCB The Panel shall be complete with iterconnections and earthing etc.,
Supply, Transportation unloading, installation, testing and commissioning of Phase
Segregated 6Way DB comprising of the followings and including all other accessories etc.,
Incomer: 1 No 40A 30MA ELMCB Outgoing: 3 Nos 25A DP MCB, 18 Nos 6/25A SP MCB The
Panel shall be complete with iterconnections and earthing etc.,
Supply, Transportation unloading, installation, testing and commissioning of Phase
Segregated 8 Way DB comprising of the followings and including all other accessories etc.,
Incomer: 1 No 63A 30MA ELM CB Outgoing: 3 Nos 32A DP MCB, 24 Nos 6/25A SP MCB The
Panel shall be complete with iterconnections and earthing etc.,
Supply, Transportation unloading, installation, testing and commissioning of Phase
Segregated 4 Way DB comprising of the followings and including all other accessories etc.,
Incomer: 1 No 40A 30MA ELMCB ; Outgoing: 3 Nos 25A DP MCB, 12 Nos 6/25A SP MCB The
Panel shall be complete with iterconnections and earthing etc.,
Supply, Transportation unloading, installation, testing and commissioning of Power
Distribution Board VTPN Type 8 Way comprising of the followings and including all other
accessories etc., Incomer: 1 No 40A TPN MCCB ; Outgoing: 8 Nos 16/20/32A TPN MCB ; The
Panel shall be complete with iterconnections and earthing etc.,
Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet , with 2 pole and earth ,
metal enclosed plug top alongwith 20 A "C" curve , SP,MCB, in sheet steel enclousure , on
surafce or in recess , with chained metal cover for the socket out let and complete with
connections , testing and commissioning etc.as required. (Electrical SOR: Item No:2.18)
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories , and providing
18 MR masonry enclosure with cover plate having locking arrangement and watering pipe etc. with Set 6.00 6,003.79 36,022.76
charcoal / coke and salt as required. (Electrical SOR: Item No:5.2)
Earthing with G.I.earth plate 600 mm x 600 mm x 6 mm thick including accessories, and
19 MR providing masonry enclosure with cover plate having locking arrangement and watering pipe of Set 2.00 6,852.40 13,704.80
2.7 meter long etc.but with charcoal / coke and salt as required.
Supplying and laying 25 mm x 5 mm copper strip at 0.50 meter below ground as strip earth
electrode , including connection / terminating with nut , bolt, spring , washer etc.as required.
(Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer
spached at 50mm)
Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as
Supply and transportation of following XLPE insulated, 1100V grade armoured alluminium cable
as per specification confirming to IS:7098 (Part - I)./1554-Il
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of
23 MR following size direct in ground including excavation , sand cushioning, protective covering and Meter 560.00 414.71 232,238.16
refilling the trench etc.as required - Upto 35 sq.mm.
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of
24 MR following size direct in ground including excavation , sand cushioning, protective covering and Meter 25.00 426.23 10,655.70
refilling the trench etc.as required - above 35 sq.mm and upto 95 sq.mm
ANUJ NAVNEET Digitally signed by ANUJ
CHACHA Date: 2022.10.29
NAME OF PROJECT : Development of existing bus station as a Smart Integrated Bus Terminus (4.5 acres) with 25000 sqft commercial space at
BILL OF QUANTITITES
S.No Description of Item Unit Quantity Rate Total Amount
S.No Description of Item Unit Quantity Rate Total Amount
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of
25 MR following size direct in ground including excavation , sand cushioning, protective covering and Meter 225.00 437.74 98,492.54
refilling the trench etc.as required - above 95 sq.mm and upto 185 sq.mm
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV
26 MR grade of following size on wall surface as required - upto 35 sq.mm (clamped with 1mm thick Meter 1,633.00 31.66 51,699.80
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV
27 MR grade of following size on wall surface as required - above 35 sq.mm and upto 95 sq.mm Meter 25.00 89.00 2,224.89
(clamped with 25 x3mm MS flat clamp)
ANUJ NAVNEET Digitally signed by ANUJ
CHACHA Date: 2022.10.29
NAME OF PROJECT : Development of existing bus station as a Smart Integrated Bus Terminus (4.5 acres) with 25000 sqft commercial space at
BILL OF QUANTITITES
S.No Description of Item Unit Quantity Rate Total Amount
S.No Description of Item Unit Quantity Rate Total Amount
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV
28 MR grade of following size on wall surface as required - above 95 sq.mm and upto 185 sq.mm Meter 25.00 104.39 2,609.87
(clamped with 25 / 40 x 3mm MS flat clamp)
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV
29 MR grade of following size on cable tray as required - upto 35 sq.mm (clamped with 1 mm thick Meter 25.00 26.63 665.82
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV
30 MR grade of following size on cable tray as required - above 35 sq.mm and upto 95 sq.mm Meter 25.00 61.84 1,546.10
(clamped with 1 mm thick saddle)
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV
31 MR grade of following size on cable tray as required - above 95 sq.mm and upto 185 sq.mm Meter 25.00 77.23 1,930.78
(clamped with 25 / 40 x 3mm MS flat clamp)
Supplying and making cable route marker with cement concrete 1:2:4 (1 cement :2
coarse sand : 4 graded stone aggregate 20 mm nominal size) of size 60 cm x 60 cm at the
bottom and 50 cm x 50 cm at the top with a thickness of 10 cm including inscription duly
engraved as required.
Supplying and making end termination with brass compression gland and aluminium lugs
33 MR for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 Per set 36.00 123.61 4,449.78
kV grade as required - 2 X 6 sq.mm (19mm)
Supplying and making end termination with brass compression gland and aluminium lugs
34 MR for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 Per set 6.00 124.89 749.35
kV grade as required - 2 X 10 sq.mm (19mm)
Supplying and making end termination with brass compression gland and aluminium lugs
35 MR for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 Per set 6.00 130.54 783.26
kV grade as required - 4 X10 sq.mm (25 mm)
Supplying and making end termination with brass compression gland and aluminium lugs
36 MR for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 Per set 80.00 132.77 10,621.89
kV grade as required - 4 X16 sq.mm (28 mm)
Supplying and making end termination with brass compression gland and aluminium lugs
37 MR for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 Per set 8.00 135.38 1,083.05
kV grade as required - 31/2 X25 sq.mm (28 mm)
Supplying and making end termination with brass compression gland and aluminium lugs
38 MR for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 Per set 2.00 172.87 345.74
kV grade as required - 31/2 X50 sq.mm (28 mm)
Supplying and making end termination with brass compression gland and aluminium lugs
39 MR for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 Per set 4.00 262.66 1,050.62
kV grade as required - 31/2 X120 sq.mm (45 mm)
Sub Total- NON SCHEDULE ITEMS (Electrical Works) 3,545,855.67
Fire Fighting System
NON-SCHEDULE ITEM
Excavating trenches of required width for pipes and fittings etc. including dressing of sides,
ramming of bottom depth upto 1.5 Mtrs including getting out the excavated soil and then
1 MR returning the soil as required in layers not exceeding 20 cms in depth including consolidating Cum 400.00 621.05 248421.05
each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as
directed within a lead of 150 mtrs (pipe not exceeding 300 mm). In ordinary soil.
RCC HUME PIPE: Providing, Laying. Testing & Commissioning of RCC hume pipes of NP2 class
with suitable collars filling the recess at joints of pipes with hemp dipped in hot bitumen or
2 MR other suitable compound for chaulking of joint by jack, setting up of loose space over the collar
joints caulked with CM 1:2, finished both ends to a slope of 1:1 including curing, testing of
pipes, etc., complete.
ANUJ NAVNEET Digitally signed by ANUJ
CHACHA Date: 2022.10.29
NAME OF PROJECT : Development of existing bus station as a Smart Integrated Bus Terminus (4.5 acres) with 25000 sqft commercial space at
BILL OF QUANTITITES
S.No Description of Item Unit Quantity Rate Total Amount
S.No Description of Item Unit Quantity Rate Total Amount
Drilling with core cutting machine in RCC beams,slabs floors,etc., for laying pipes and rendering
thesame in RCC 1:2:4, finishing the same to the satisfaction of the owner or his authorized
3 MR representative etc., including nominal reinforcement wherever required, complete. The quoted
rate shall alsoinclude for providing EPOXY based water proofingcompound for sealing the joints
around the pipes. RCC walls/ beams ( upto 400 mm thk)
a 100mm dia. upto 150 mm dia. (from pump room - pipe outlets) Nos. 3.00 1676.84 5030.53
Supplying and costruction of of P.C.C support blocks of 1 : 2 : 4 concrete mix of sizes as given
4 MR below for pipe supports at terrace level to run the terrace fire hydrant pipes with necessary
shuttering, plastering, pipe fixing anchors etc., complete as per specifications.
B FIRE HYDRANT SYSTEM
UNDER GROUND PIPING Supplying, installing, testing and commissioning of G.I Pipes, ERW
confirming to IS 1239 Pt - I Class 'C' Heavy grade up to 150mm dia and pipes 200mm dia and
above shall be G.I as per IS: 3589 (6mm Wall thick) with painting, suitable type of supports,
anchor fasteners, bolts nuts ( Galvanised), clamps, "U" bolts, malleable specials such as
Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using
suitable supports etc, complete. PIPE TO EXTERNAL YARD HYDRANT
PIPING ABOVE GROUND : Supply, errect, jointing, testing and commissioning of heavy class
G.I pipes (as per IS-1239). The pipes being fixed on to the wall or suspended from the ceiling /
truss with angle iron supports complete with bends, tees, flanges and with all other required
accessories including painting of the pipeline with two coats of approved enamel paint over a
coat of a Rate quoted above shall include providing M.S.supports in angle iron / plates pipes
6 MR etc. at every 2.5 m c/c. Rate quoted shall include for supply and providing necessary, welding
cutting, 'U' clamps both nuts, washers etc.as per specification or pipe supports for horizontal /
vertical pipes running along wall / column, slabs trenches etc to suit different dia pipes made of
GI/MS rods, flats etc. consists of strap, nuts washers, threaded rod etc., rate quoted shall also
include necessary aniti corrosive painting and 2 coat f approved enamel colour paintnti corrosive
primer etc. complete. As per IS code standards.
BUTTERFLY VALVE: Supplying, Installing, testing and commissioning CI butterfly valves as per
7 MR BS 5155 ( PN 10/16) slim seal standard lever operated type with required flanges, nuts, bolts
c 100 mm dia. (Shaft riser and Terrace) Each 5.00 2593.52 12967.58
AUTOMATIC AIR RELEASE VALVES (TERRACE LVL FOR WET RISER) : Supply, fixing, testing
8 MR and commissioning of Air release valves screwed ends of approved brand of manufacture, with Each 3.00 1552.63 4657.89
accressories,etc complete 25 mm dia.
BALL VALVE (for arv) Supplying, installing, testing and commissioning of heavy duty Gun Metal
gate valves screwed ends of approved brand of manufacture.PN-10 a) 25 mm dia.
NON RETURN VALVE (TERRACE LVL FOR OHT OUTLET ) : Supply, fixing, testing and
10 MR commissioning of Non return valve falnged end of approved brand of manufacture, with
accressories,etc complete. PN:10
11 MR INTERNAL FIRE HYDRANT SYSTEM :
1 Nos. 63 mm dia female instantaneous pattern oblique SINGLE outlet hydrant valve with
chain and cap of GM gunmetal.
2 Nos. 63 mm size RRL as per IS 636 Type I (ISI mark) 15 Mtrs long with 63 mm gunmetal
male and female instantaneous coupling.
c) 63 mm Gunmetal branch pipe with hexagonal detachable 16 mm nozzle, made
instantaneous coupling etc. complete.
Hose reel drum with 19 mm dia bore reinforced rubber hose of length 40 Mtrs length fitted with
d 6.35 mm dia. nozzle. The hose reel drum shall be recessed swinging type with reel drum hose nos 7.00 10606.34 74244.36
provided with coupling as per detailed specification.
Internal hose cabinet frame (1200 x 900 x150) fronted with hinged & lock made out of 16 G
e M.S. sheet with powder coated paint of to suit internal fire duct opening to accommodate the Nos 7.00 9149.35 64045.43
following accessories as mention above :-
EXTERNAL FIRE HYDRANT SYSTEM ( GROUND LVL) : Supply, fix, test and
commissioning of the following :-
80 mm dia GI MSDF bend.80 mm dia GI MSDF stand pipe (1 Mtr below + 1 Mtr above).The
pipe portion below ground shall be with anti corrosive treatment as per detail specifications
1 No. 63 mm dia female instantaneous pattern oblique hydrant valve with chain and cap of gun
2 Nos. 63 mm size C.P. Hose as per IS 8423 Type I (ISI mark) 15 Mtrs long with 63 mm gun
metal make male and female instantaneous coupling.
ANUJ NAVNEET Digitally signed by ANUJ
CHACHA Date: 2022.10.29
NAME OF PROJECT : Development of existing bus station as a Smart Integrated Bus Terminus (4.5 acres) with 25000 sqft commercial space at
BILL OF QUANTITITES
S.No Description of Item Unit Quantity Rate Total Amount
S.No Description of Item Unit Quantity Rate Total Amount
63 mm gun metal branch pipe with gun metal hexagonal detachable 16 mm nozzle, made
instantaneous coupling etc. complete.
M.S. Hose cabinet stand mouted type fabricated out of M.S. sheet of 16 swg. with glass fronted
( 4mm thick glass with rubber beeding) door and size of the cabinet shall be 600mm x 750
mm x 250 mm Quoted rate shall be includes suitable stand for mounting, all fasteners etc, and
cabinet shall be powder coated of approved colour both inside and out side.
13 TERRACE FIRE HYDRANT SYSTEM:-
ERRACE PUMP: Supply and fix terrace level 1 no of monoblock pump of capacity 450 LPM 35
Mtrs head with suitable electrical driven motor, suction and delevery side Butterfly valve, non
return valve, pressure guage, switches,cables,wires and necessary acessories etc. complete as
per specification.The pump shall be with IP 55 protection.
TERRACE PUMP PANELS AND ACCESSORIES: Supply, storing, erection, testing and
commissioning of wall mounted control panel with SFU's, DOL starter, indicating lamps, push
buttons, , necessary connecting cables, etc as per detailed specification. The panel shall have IP
55 protection and provision to BMS intigration. etc., complete.
TWO WAY FIRE BRIGADE INLET: a) Two nos. 63 mm dia Gun metal instantaneous inlet
14 MR arranged on a 100 mm dia GI header with flanges. b) 1 nos. 100 mm dia Butterfly valves ( LS 1.00 12141.58 12141.58
PN10) Insitu moulded
Providing and installing in position the following type of sign boards made out of 3mm thick
15 "Opaque" PVC foam board with computer cut, PVC non-reflective self adhesive vinyle painted
foam board, complete with mirror fasteners.
Signage with printed "IN CASE OF FIRE, USE STAIRS UNLESS INSTRUCTED OTHERWISE" of
a. MR 1.5cm height letters in red with white back ground.The size of the board shall be 25cm x 30 cm Nos 4.00 558.95 2235.79
and shall be fixed at the height of 2 mts. from finished floor near Manual call points.
Floor indentification signage ( ie, GROUND FLOOR …etc.) at each stair enclosure on every floor,
b. MR indicating the floor number in words, lettering size shall be 7.5 cm with contrasting colour from Nos 4.00 496.84 1987.37
back ground.Size shall be 15cm x 60cm.
Providing and fixing in position the signages " FIRE ORDER" it should contain the following
16 matter on 3mm thick "Opaque" PVC foam board of computerised cut, PVC non-reflective self
adhesive vinyle painted foam board of 3' x 4'.
A) ALERT THE SECURITY AT SECURITY ROOM BY ACTUATING MANUAL CALL POINT LOCATED
AT STRATEGIC LOCATIONS. B) EVACUATE THE OCCUPANTS BY USING FIRE EXITS AND
EMERGENCY EXITS ONLY AND ASSEMBLE AT VARIOUS ASSEMBLY POITS. C) IF POSSIBLE TRY
a MR TO EXTINGUISH THE FIRE BY USING NEAREST / SUITABLE PORTABLE EXTINGUISHER OR Nos 4.00 3105.26 12421.05
WATER FROM NEAREST WET RISER. D) BE CALM AND DO NOT GIVE ANY ROOM FROM PANIC,
WALK, DO NOT RUN. E) IF YOU ENCOUNTER SERIOUS DIFFICULTY IN EVACUATION, FLAT
AND TRY TO ATTRACT ATTENTION OF RESCUE TEAM.
ACTION BY SECURITY/RECEPTION UPON RECEIPT OF INFORMATION THROUGH FIRE ALARM
ORFIRE DETECTORS OR BY USING PUBLIC ADDRESS SYSTEM.
D FIRE EXTINGUISHER SYSTEM
ABC STORE PRESSURE Fire Extinguisher 2 Kgs capacity. Supply and install in position approved
make ABC Stored pressure type Fire Extinguisher of 6 kgs capacity, fitted with discharge control
16 MR valve (sq.grip type) CE marked and pressure gauge, filled with mono ammonium phosphate Each 7.00 3113.96 21797.71
powder as per EN 3 615 approval, with discharge hose and open nozzle and supplied complete
with initial charge as per IS: 15683 with ISI mark and wall bracket. Fire Rating 3A, 21B
ABC STORE PRESSURE Fire Extinguisher 6 Kgs capacity Supply and install in position approved
make ABC Stored pressure type Fire Extinguisher of 2 kgs capacity, fitted with discharge control
17 MR valve (sq.grip type) CE marked and pressure gauge, filled with mono ammonium phosphate Each 1.00 6642.78 6642.78
powder as per EN 3 615 approval, with discharge hose and open nozzle and supplied complete
with initial charge as per IS: 15683 with ISI mark and wall bracket. Fire Rating 3A, 21B
WATER STORE PRESSURE Fire Extinguisher of 9 Ltrs capacity (Near staircase) Supply and install
in position approved make Water Stored pressure type Fire Extinguisher of 9lit capacity, fitted
18 MR with discharge control valve ( Sq.grip type ) CE marked and pressure gauge, with discharge Each 5.00 8071.20 40356.00
hose and open nozzle and supplied complete with initial charge as per IS: 15683 with ISI mark
and wall bracket. Fire Rating 2A
CARBON-DI-OXIDE 2 Kgs capacity Fire Extinguisher (inside lift area) Supply and install in
position approved make Co2 type Fire Extinguisher of 2kgs capacity, made from brand new
seamless drawn steel cylinder as per IS: 7285 with ISI mark and Chief of controller of
explosives approval, fitted with wheel/sq.grip valve as per IS: 3224 with ISI mark, with
discharge bend and horn and supplied complete with initial charge as per IS: 15683 with ISI
mark and wall bracket. Fire Rating 8B or 13B
CARBON-DI-OXIDE 4.5 Kgs capacity Fire Extinguisher (Inside Electrical appliances room)
Providing ,fixing , testing and commissioning of Portable Carbon-di-oxide Gas Type Fire
Extinguisher 4.5 Kgs, squeeze Grip,Controllable discharge mechanism with nozzle, bend, Hose
20 MR and wall mounting bracket etc.The Can is made of Seamless Clinger and External Coating done Each 2.00 9135.68 18271.37
by Spray Painting.The thickness shall not less than 4.5 mm made of Sheet metal.The Fire
Extinguishers shall be ISI Approved as per IS 15683:2006.Vendor shall consider the suitable
signages along with the extinguishers.
E PUBLIC ADDRSSIBLE SYSTEM ( 2 way talk back system) )
PANEL WITH VOICE EVACUATION - GROUND LVL Supplying, installing, testing and
commissioning of zone selector P.A. console and with CRCA sheet housing,with necessary input
,output devices and control desk( rack) as required. Console shall have all call / call back facility
complete with battery back up and it should also work on AC single phase power.The panel
shall have intigration facilty with BMS and also voice evacuation system with intigration facility
with PA and FA Panel (12 Zone)
ANUJ NAVNEET Digitally signed by ANUJ
CHACHA Date: 2022.10.29
NAME OF PROJECT : Development of existing bus station as a Smart Integrated Bus Terminus (4.5 acres) with 25000 sqft commercial space at
BILL OF QUANTITITES
S.No Description of Item Unit Quantity Rate Total Amount
S.No Description of Item Unit Quantity Rate Total Amount
AMPLIFIER WITH ACESSORIES : GROUND LVL (Block Wise) Supplying, installing, testing and
22 MR commissioning solid state Amplifier out put in rack, including neccessory control wires, jacks Nos 1.00 31052.63 31052.63
etc. complete. 100 W amplifier
CABLES : Supplying, installing, testing and commissioning 40 strand twin core control cables of
PVC insulated copper conductor, Confirming to IS 1554, as per specification.
CONDUITS : A) Supplying, installing, testing and commissioning approved make 25mm P.V.C.
24 MR conduits on ceiling / wall / floor etc. complete with accessories like, Junction boxes, Collars, Rmt 250.00 64.59 16147.37
ANUJ NAVNEET Digitally signed by ANUJ
CHACHA Date: 2022.10.29
NAME OF PROJECT : Development of existing bus station as a Smart Integrated Bus Terminus (4.5 acres) with 25000 sqft commercial space at
BILL OF QUANTITITES
S.No Description of Item Unit Quantity Rate Total Amount
S.No Description of Item Unit Quantity Rate Total Amount
F CONVENTIONAL FIRE ALARM SYSTEM
FIRE ALARM CONTROL PANEL Supplying, installing, testing and commissioning of
CONVENTIONAL TYPE Fire Alarm Control panel with battery back up for 8 hours normal
operation and 15 minutes alarm operation. The control panel, battery charger and necessary
25 MR accessories, etc, shall be UL listed.The panel shall be Below mentioned capacity, The panel LS 1.00 44094.74 44094.74
shall consisting with 80 character LCD display and RS 485 for networking. with suitable
Standard mounting Rack, The panel shall have intigration facilty with BMS and also intigration
facility with PA Panel etc complete in all respects as per detailed specifications (16 Zone) :
FIRE ALARM DEVICES - MCP, HOOTER & SPEAKER (CONVENTIONAL TYPE) : Supplying,
installing, testing and commissioning of convetional Manual pull station having an integrally
mounted MCP, HOOTER & P.A SPEAKER-6 Watts (Two way talk back). (3 in 1 type). Rate
quoted shall include providing, fixing as 3 in 1 approved make Box.
HOOTER : Supplying, installing, testing and commissioning of convetional type Hooter with with
necessary mount ing accessories etc.
MANUAL CALL POINT : Supplying, installing, testing and commissioning of Convetional type
Single action Manual pull station necessary mounting accessories etc.,
COMBINATION DETECTORS (MULTI SENSOR): Supply,installation, testing and commissioning
29 MR of Conventional type photoelectric & smoke detectors with dual chamber solid state design, Each 186.00 3500.25 651046.99
indicating lamp, mounting base etc. shall be UL / EN / CE listed as per detailed specification.
CABLE: Supply, testing and commissioning of 1100V Grade 2 core x 1.5 sqmm PVC insulated
FRLS armoured cable for connecting detectors / devices to panels and main micro processor
30 MR control panels located in the respective floors including end termination with indentification tags Rmt 1500.00 136.63 204947.37
at each end, etc., complete.The quoted rates shall be inclusive of necessary juntion boxes made
of M.S 16 SWG with cutouts for incoming & outgoing cables in respective floors.
CONDUITS : a) Supplying, installing, testing and commissioning approved make PVC conduits
on RECESS ceiling / wall / floor etc. complete with accessories like, Junction boxes, Collars,
Bends etc. ( SHALL BE EMBEDDED IN CEILING DURING RCC ROOFING FOR EACH SHOP)
b) Supplying, installing, testing and commissioning approved make 20 mm dia. P.V.C. flexible
32 MR conduits on ceiling / wall / floor etc. complete with accessories like, Junction boxes, Collars, Rmt 25.00 40.99 1024.74
G FIRE PUMP ROOM EQUIPMENT
Supply, Erection, testing & commissioning of electrical motor driven Hydrant Pump of
horizontal centrifugal end suction backpull out type with gland packing and capable to
deliver 2280LPM (137 m³/ Hr) at 60 MWC with all necessary accessories like bronze
impeller, stainless steel shaft and mechanical seal along with anti-vibration mounting, coupling,
coupling guard and base plate for pump, fabricated mild steel channel,foundation bolts, and
33 MR pump should have the dry run sensor provision, etc., as per local fire brigade requirement . The No. 1.00 637790.00 637790.00
pump shall capable to have 3.5 kg/cm² residual pressure at top most hydrant point. The pump
shall be coupled to electrical motor of 65 HP with speed of 2900 RPM, Electric supply 415V, 50
Hz and complete set shall be mounted on a common base frame. The quoted rate shall
includes providing & fixing of coupling, coupling gaurd and Foundation bolts etc. RCC
foundation is under civil scope.
Supply, Erection, testing & commissioning of Diesel Engine driven common stand by
pump, horizontal centrifugal end suction backpull out type with gland packing and
capable to deliver 2280LPM (137 m³/ Hr) at 60MWC with all necessary accessories like
bronze impeller, stainless steel shaft and mechanical seal along with anti-vibration mounting,
coupling, gear box, base plate for pump, fabricated mild steel channel with foundation bolts
etc., It includes providing and fixing fuel oil tank (capacity as per TAC requirements) with
supports and necessary pipe works for diesel engine, battery and battery charger to be
connected to control panel of diesel engine and exhaust silencer including necessary pipe work
and lagging, pump should have the dry run sensor provision, etc., and shall be automatic in
34 MR operation diesel engine control panel with 24V DC storage battery & its battery charger with No. 1.00 814200.00 814200.00
required Ampere - hour rating, terminal box (2 nos. of 12volts), cooling water line for engine
with required pipes / valves / fittings etc., as per TAC including all associated electrical works.
The pump shall capable to have 3.5 kg/cm² residual pressure at top most hydrant point. The
pump shall coupled to Diesel engine, radiator water cooled type with speed of 1800RPM and
complete set shall be mounted on common base frame. Batteries & battery leads with stand,
200 liters capacity Fuel tank ( for 4 Hrs. operation ) with stand & gauge glass, Fuel piping with
valves. The quoted rate shall includes radiator water cooling piping(if required) coupling gaurd
and other stanadrd accessories and foundation bolts, etc. complete. RCC foundation is under
Supply, erection, testing & commissioning of electrical motor driven Jockey pump of
horizontal centrifugal end suction back pull out type with gland packing and capable to
deliver 180LPM (10.8 m³/ Hr) at 60 MWC with all necessary accessories like bronze
impeller, stainless steel shaft and mechanical seal along with anti-vibration mounting pad and
35 MR flexible connections at discharge end of the pipes, pump should have the dry run sensor No. 1.00 347789.47 347789.47
provision etc. and shall be automatic in operation.The pump shall be coupled to motor of 15 HP
with speed of 2900RPM and complete set shall be mounted on common base frame. The
quoted rate shall includes providing & fixing of coupling, coupling gaurd and Foundation bolts
etc. RCC foundation is under civil scope.foundation is under civil scope
36 Control Panel for Fire pumps.
ANUJ NAVNEET Digitally signed by ANUJ
CHACHA Date: 2022.10.29
NAME OF PROJECT : Development of existing bus station as a Smart Integrated Bus Terminus (4.5 acres) with 25000 sqft commercial space at
BILL OF QUANTITITES
S.No Description of Item Unit Quantity Rate Total Amount
S.No Description of Item Unit Quantity Rate Total Amount
Fabrication, Supplying, Installation, Testing & Commissioning of electrical control panel, of
cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet,
compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of
(i) MR approved shade after 7 tank treatment process, cable alley, inter-connection, having Set 1.00 180105.26 180105.26
switchgears and accessories mounting and internal wiring, earth terminals, numbering etc.
complete in all respects, suitable for operation on 415 V, 3 phase, 50 HZ. AC supply with
enclosure protection class IP 42 as required. INCOMER
(d) Diesel Engine Control.
Control for Diesel Engine comprising:-
(i) Auto/Manual selector switch & 3 attempt starting device, timers and relays as required,
push buttons, start/stop in manual mode.
(ii) Indication lamp for High/Low Lub.oil pressure, High Water Temp.and Engine ON
(iii) Battery charger suitable for 12 V/ 24 V DC with boost and tickle selector switch, 0-30 V
DC'<volt meter, 0-20A DC Ammeter.
(iv) AII standard relays and accessories for automatic operation of diesel engine. 1100 V GRADE
POWER / CONTROL CABLES
Supplying, laying, testing & commissioning of FRLS, XLPE insulated, PVC outer sheateh, steel
armoured, aluminium / copper conductor, 1100v grade power cables with glands etc. The
cables shall be laid in tray / Hume pipe / in trenches/on walls/ floor etc. as required. For cables
laid out door the rate shall include earth excavation providing brick and sand protection, refilling
and compacting the earth.The rate shall excludes tray & Hume pipes.The minimum size of the
cables shall as mentioned below,
a MR 2R x 3.5 core x 50 sqmm Aluminium conductor cable for Electrical motor Driven pump. Mtr 20.00 786.25 15725.05
b MR 4 core x 16 sqmm Aluminium conductor cable for Jockey Pump. Mtr 10.00 342.82 3428.21
c MR 12 core x1.5 sqmm Copper cable for Diesel Engine pump Mtr 10.00 614.84 6148.42
d MR 2 core x 1.5 sqmm Copper cable for pressure switch Mtr 20.00 300.59 6011.79
e MR 4 core x 2.5 sq mm Copper cable for MCC to ESP interlocking. Mtr 10.00 799.92 7999.16
CABLE TRAY Supplying and fixing of perforated G.I.sheet cable tray 150MM with neccessory
angle iron suspension supports, anchor fasteners etc. complete. Maximum height of suspension
shall not exceed 500 mm.Size of the tray shall be suitable for laying the above mentioned
ELECTRONIC LEVEL INDICATOR : Supply, fixing, testing and commissioning of electronic type
level indicaor of approved make with pressure transducer, alarm,sensors, LED display for
indicating high, half full and low level in sump (ground level reservoir) Rate quoted shall include
for supply and laying necessary armoured control cablling inside pumphouse (approx. length 30
meters) for connecting sensors to panels located inside pumphouse, wiring from the control
panel to sensor probes, ON / OFF indicators etc. complete in all respects.
(vi) VALVES AND STRAINERS :
SLUICE VALVES : Tank outlet Supply, install, testing & commissioning of CI sluice valves of
a MR approved make as per IS 780 Class I with necessary flanged tail piece, compansion flanges, Each 1.00 41567.05 41567.05
bolts, nuts, gaskets, etc.,complete in all respects. PN 10 rating valve 150 mm dia.
Supply, Installation , Testing & Commissioning of MS Fabricated Pot/Basket Strainer with
accessories etc., complete. 100 mm dia
NON RETURN VALVE: Supply, Installation , Testing & Commissioning of NON RETURN VALVE
with accessories etc., complete.-PN16 100 mm dia.
SLUICE VALVE: Supplying, Installing, testing and commissioning CI Sluice valves as per BS
d MR 5155 ( PN 16) slim seal standard lever operated type with required flanges, nuts, bolts etc. Each 6.00 6256.48 37538.91
complete. b) 100 mm dia.
BUTTERFLY VALVE Supplying, Installing, testing and commissioning CI butterfly valves as per
e MR BS 5155 ( PN 10) slim seal standard Gear operated type with required flanges, nuts, bolts etc. Each 1.00 12570.11 12570.11
complete. (For Delivery Header) a)100 mm dia.
FLOW METER: a) Supplying, Installing, testing and commissioning of Flow meter with necessary
accessories as per standard specifications etc complete. a) 100 mm dia.
Supplying, installing, testing and commissioning of Gun metal chrome finished Ball valves with
fittings of screwed end type. 25 mm nominal dia (for pressure switch manifold & air vessel tank)
Supply and installation of differential Pressure switches of suitable range (0 to 12 bar) for
pumpsets complete with necessay Ball valves, Fittings like unions / colors / reducers etc.
Supply and installation of Pressure gauges of suitable range (0-16 bar), 110 mm diameter dial
(x) MR for pumpsets completes with necessary Ball valves, siphon, Fittings like unions / colors / Set 4.00 3785.94 15143.75
Supply, fixing, testing and commissioning of air vessel tank shall be fabricated out of of 250 mm
dia MS pipe to 1000 mm long complete with 25mm inlet, 25mm drain, 25mm dia connection
(xi) MR for air release valve including legs, painting with red oxide primer and finished with fire red No. 1.00 36424.74 36424.74
enamel paint. It shall be inclusive of all relevant pipes, valves, specials upto pump header and
other accessories etc.
Exhuast pipe for Diesel engine of 100 mm dia M.S. Medium grade with mineral wool insulation
with aluminum sheet. The quoted rate shall include 100 mm diameter MS pipe medium grade
conforming to IS 1239 Part-1 and mineral wool insulation with aluminum sheeting and Pipe
Sub Total NON SCHEDULE ITEM (Fire Fighting System) - 6,687,501.57
Passenger Info -
NON-SCHEDULE ITEM
ANUJ NAVNEET Digitally signed by ANUJ
CHACHA Date: 2022.10.29
NAME OF PROJECT : Development of existing bus station as a Smart Integrated Bus Terminus (4.5 acres) with 25000 sqft commercial space at
BILL OF QUANTITITES
S.No Description of Item Unit Quantity Rate Total Amount
S.No Description of Item Unit Quantity Rate Total Amount
Supply and Fixing of Information System with the led p4 smd2525 ; pixel pitch 4 mm ; module
make brigade led pro ; brightness 6000 cd/m2 module size : 320 mm x 160 mm refresh rate
≥3840 ; gray scale 13 bit ; pixel resolution 80 x 40 (3200 dots) ; 62,500 cd/m2 viewing angle
140o control method synchronization driving method 1/8 scanning optimum view distance ≥4m
working temperature 20oc~80o mtbf >100000 hrs. consumption ≤9.34 a per module driving ic
1 MR icn chip pcb thickness 2.2 mm pcb track gold alloys certificates ce, iso9001:2015 protection type nos 2.00 719800.00 1439600.00
front: ip65; rear: ip54 body type aluminium profile sending card huidu c16c receiving card
huidu r512 audio aux o/p yes service access back door open interface usb and lan power supply
yy (bis certified) wires copper with tin coated working environmen -20°c to +60°c humidity
range rh﹤ 95%(non-condensing)
Sub Total (Passenger Info) - 1,439,600.00
ANUJ NAVNEET Digitally signed by ANUJ
CHACHA Date: 2022.10.29
NAME OF PROJECT : Development of existing bus station as a Smart Integrated Bus Terminus (4.5 acres) with 25000 sqft commercial space at
BILL OF QUANTITITES
S.No Description of Item Unit Quantity Rate Total Amount
S.No Description of Item Unit Quantity Rate Total Amount
3 Seater Benches -
NON-SCHEDULE ITEM
Supply and fixing of Three Seater Tandem with Arms , With Shiny Finishthe shell shall be
assembled on the cross beam with help 0f bolt and brackets with Product Dimensions : 64D x
180W x 80H cm; Style Contemporary ; Material : Chrome Steel
Sub Total (3 Seater Benches) - 1,050,200.00
NON-SCHEDULE ITEM
Make : Cri or Equivalent ; Flowrate : 1500 Lph Inlet / Outlet : 25mm ; Type : Monoblock 1hp
PRESSURE SAND FILTER: Make : PENTAIR or Equivalent ; Flow rate : 1500 Lph ; Material of
Construction : FRP Inlet / Outlet Connection : 25 mm ; Multi port Valve Size : 25 mm Media :
Pebbles & Sylex and Sand. ACTIVATED CARBON FILTER: ; Make : PENTAIR or Equivalent ;
Flow rate : 1500 Lph ; Material of Construction : FRP ; Inlet / Outlet Connection : 25 mm; Multi
port Valve Size : 25 mm ; Media : Cocount Shell Activated Carbon & Pebbles. MICRON FILTER: ;
Flow rate : 1500 Lph ; Material of ; Construction : Polypropylene ; Inlet / Outlet Connection :
¾” mm ; Number of Cartridges : 2 Nos. of 20” Long ; Number of Housing : 2 Nos. ; Working
Pressure : 2 to 3 Kg / Sq. cm ; Filter Elements : PP. ; RO PLANT FRAME: Skid :
1 MR Stainless Steel (SS 202 Grade) ; Thickness of square pipe : 1 inch ; Thickness of sheet : 1.2 mm nos 3.00 128620.00 385860.00
; Method of cutting : Laser. Membrane: ; Material of Construction : Thin Film Composite ; Make
: ( FILMTEC/Brackish/Hydranatics ) ; No. of Membranes : 2 Nos. Dimension : 40” x 40” Type of
membrane : Sprial Wound. HIGH PRESSURE PUMP: Material of Construction : SS 304 Make :CRI
(2-16) ; Type : Vertical Multi Stage ; Motor Power : 2 HP ; Flow Rate : 1500 LPH. ;
INSTRUMENTS : ; ACcord 1:3 Panel with Automatic Float – 1no; Flowmeter – 2no”s; SS
Pressure Gauges - 2no”s ; Solenoid Valve – 1no. Float - 1no. ; Dosing Pump E-Dose - 1no
Sub Total ( RO Plant) - 385,860.00
TOTAL BOQ Amount 314865803.37
ANUJ NAVNEET Digitally signed by ANUJ
CHACHA Date: 2022.10.29
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.06 MB
NIT_Integerated_Terminal_Puducherry.pdf
Tender Document
GCC_Contract_2019_along_with_amendment_No_1_to_18.pdf
Tender Document
SCC.pdf
Tender Document
Integrity_Pact.pdf
Tender Document
List_of_Approved_Makes.pdf
Tender Document
SOIL_Investigation_Report.pdf
Tender Document
Tender_Drawings.pdf
Tender Document
TS_Page_1_to_130.pdf
Tender Document
TS_Page_131_to_300.pdf
Tender Document
TS_Page_301_to_448.pdf
Tender Document
TS_Page_449_to_609.pdf
Tender Document
BOQ.pdf
Tender Document
corrigendum-1172-Corrigendum_02_Bus_Terminal.pdf
pdf • 0.08 MB
corrigendum-1120-Cor_Adm_01.pdf
pdf • 0.09 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .