Electrification works of multistoried Warehouse cum Agricomplex at State Warehouse Kozhinjampara in Palakkad district under NABARD WIF Scheme

Amount

NEWGODOWN 1.10.3: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C

1.14.2: Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

1.17.12: Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm

1.14.1: Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2x1.5 sq.mm + 1x1.5 sq.mm earth wire

1.17.3: Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm

1.31: Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).

1.24.3: Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch

1.24.5: Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet

1.27.2: Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)

90.3.19.3: Supply conveyance, installation, testing and commissioning the light fittings of following types made from CRCA sheet 0.5mm thickness with all accessories and lamps directly on wall and giving connections with 16/0.20 mm 3 core PVC insulated and sheathed round copper conductor flex wire or extending the original wiring and giving connections as required 1200 mm 1X 20 W LED Lamp with box type fixture

od141443/2022_2023: Supplying and fixing 9Watt LED Bulb as per direction of Engineer in charge

od141468/2022_2023: 20 W, 2000 lumen LED, IP 65 street light fitting with aluminium housing, stove enameled CRCA sheet steel reflector cover, acrylic cover complete with THD <10%, power factor >0.98, RoHS compliant, duly wired up for use on 230 V AC supply as per direction of Engineer in charge.

od141758/2022_2023: Supply ,installation ,testing and commissioning of 450mm 18 inch sweep heavy duty ,1400rpm ,230 v ,410w ,4 nos blades and metal frame ,single phase exhaust fan as per direction of Engineer in charge.

90.4.9: Charges for cutting holes suitable for accommodating exhaust fans above 305mm sweep and up to 450mm sweep including plastering colour washing etc. as required.

od148894/2022_2023: Supply, installation , testing & commissioning of the following meter panel board floor/ wall mounting free standing cubicle type fully compartmentalised dust tight,indoor,vermin proof panel boards fabricated out of 16 SWG CRCA sheet and powder coated as per standards . The board shall be completed with phase indication lamps in the incoming ,suitably rated TPN Aluminium busbars & earth bus of adequate capacity, double earth connection to all switches, internal rigid connection and suitable for operation on 3 phase and neutral 415 V, 50 HZ, AC system including internal wiring with suitable size wires , rotary handle, spreaders ,3mm thick gland plate , hinged type door with neoprene gasket etc. INCOMING Providing and fixing following capacity TP& N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling hole in cubicle panel , making connections etc. as required .1 Nos 100A TPN 1 set ,3 Nos 100A HRC fuse unit RYB Indication lights with fuses 3 Nos. 2 A Fuse units for indication 1 set TPN Busbar as per ISS 125A aluminium alloy, separate KSEB Meter chamber . Out going :-63A Fuse with base 9 nos, 63A 4 Pole MCB 3 nos. , 63A Neutral link 3nos as per direction of Engineer in charge

90.12.7.42: Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 25 sq mm with factory made clamp

9.1.34: Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 25 sq. mm (28mm)

90.12.7.45: Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. 4 core 70 sq mm

9.1.23: Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 70 sq. mm (38mm)

2.5.2: Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required .(Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)8 way (4 + 24), Double door

2.13.2: Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

2.15.3: Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

2.3.3: Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/ Isolator 12 way, Double door

2.12.2: Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

2.14.3: Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

2.10.4: Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole

2.10.2: Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole and netural

5.4: Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

5.19: Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

90.16.5.4: Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required. 4 mm (8 SWG)

od148969/2022_2023: Design, Fabrication, Supply of following cubicle type, fully compartmentalized, free standing type switch boards, dust tight and vermin proof, Fabricated out of 14 SWG CRCA sheet powder coated with approved colour.The switch boards should have a set of suitably rated TPN aluminium busbars 25x6 mm with specified current 125A and fault level, insulated with heat shrinkable colour coded PVC sleeves and supported using DMC/SMC pillar or finger type busbar supports. CT Metering Cubicle - Incomer feeder: - - 100A,4P MCCB DU (L&T) - 1 No. +Extended ROM-1set,Spreader 125A (L&T)-1No - - Shunt Release 1 No.(L&T) ELR+ CBCT 1 No.(ELMEASURE) - - 125A Open Type Fuse Carrier (L&T) 4Nos. + Neutral Link 125A- 1 No.+63A Din Type HRC Fuse Link-3Nos - - RYB Indication Lamps 1 Set (L&T) - - Control Fuses 20A -9Nos (L&T) - - 2A Bolted type HRC Fuse-9Nos(L&T) LT TOD Meter (L&T)-1No CT-50/5A CL-0.5,10VA(PGR) Resin Cast Type-4Nos 35 Sq mm Cu Wire for CT wiring-12 Mtrs 1.5 Sqmm Cu Wire Grey for control wiring-20 Mtrs etc.. As per standards and specifications of Electrical Inspectorate Kerala State Electricity Board Limited as per direction of Engineer in charge.

AGRICOMPLEX 1.10.3: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C

1.14.2: Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

1.17.12: Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm

1.14.1: Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2x1.5 sq.mm + 1x1.5 sq.mm earth wire

1.17.3: Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm

1.31: Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).

1.24.3: Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch

1.24.5: Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet

1.27.2: Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)

90.3.19.3: Supply conveyance, installation, testing and commissioning the light fittings of following types made from CRCA sheet 0.5mm thickness with all accessories and lamps directly on wall and giving connections with 16/0.20 mm 3 core PVC insulated and sheathed round copper conductor flex wire or extending the original wiring and giving connections as required 1200 mm 1X20 W LED lamp with box type fixture

od140755/2022_2023: Supplying and fixing 9Watt LED Bulb as per direction of Engineer in charge

od140759/2022_2023: 20 W, 2000 lumen LED, IP 65 street light fitting with aluminium housing, stove enameled CRCA sheet steel reflector cover, acrylic cover complete with THD <10%, power factor >0.98, RoHS compliant, duly wired up for use on 230 V AC supply as per direction of Engineer in charge.

90.4.5.2: Supply,conveyance,installation,testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.1200mm sweep -5star rated ceiling fan complete with 300mm down rod , canopies, shackles and blades working on 230V/240V single phase A/C

1.25: Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

2.3.2: Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator8 way, Double door

2.12.2: Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

2.14.3: Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

2.10.2: Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole and netural

90.12.1.42: Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).4 core 25 sq mm

9.1.34: Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 25 sq. mm (28mm)

9.1.32: Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)

90.12.7.14: Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3 core 10 sq mm with factory made clamp

5.3: Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (but without charcoal/ coke and salt ) as required.

5.17: Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.

90.16.5.3: Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

od141086/2022_2023: Supply,installation,testing commissioning of the following meter panel board floor/ wall mounting free standing cubicle type fully compartmentalised dust tight,indoor,vermin proof panel boards fabricated out of 16 SWG CRCA sheet and powder coated as per standards . The board shall be completed with phase indication lamps in the incoming ,suitably rated TPN Aluminium busbars earth bus of adequate capacity, double earth connection to all switches, internal rigid connection and suitable for operation on 3 phase and neutral 415 V, 50 HZ,AC system including internal wiring with suitable size wires , rotary handle, spreaders ,3mm thick gland plate , hinged type door with neoprene gasket etc. INCOMING :- Providing and fixing following capacity TP& N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel , making connections etc. as required .1 Nos 63A TPN 1 set ,3 Nos 63A HRC fuse unit RYB Indication lights with fuses 3 Nos. 2 A Fuse units for indication 1 set TPN Busbar as per ISS 63A aluminium alloy, separate KSEB Meter chamber . Out going :-32A Fuse with base 5 nos, 32A 2 Pole MCB 5 nos. , 32A Neutral link 5 nos as per direction of Engineer in charge.

BPE BHARATH POWER ENGINEERS PVT LTD

Linsta Services