MLA-SDF-MLA SDF 2024-25 PANNIYANNUR GP-WARD 15 KOYYODAN VAYAKKARA ROAD -110M

Amount

Road CONCRETE

3.5.3:Excavation in Soil using Hydraulic Excavator and Tippers with disposal upto 1000 m Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per Technical Specification Clause 302.3

3.14:Construction of Subgrade and Earthen Shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.

4.11.2:Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal. Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408. (ii) Using Gravel mix soil.

75.8.1:Providing Plain cement concrete for road work CC 1:2:4 (1 cement: 2 fine aggregate: 4course aggregate) laid to required slope and camber in panels (@ 3 m c/c) as requiredincluding compaction, finishing and tamping etc .complete. Max. size of courseaggregate not exceeding 25mm , mixed in concrete mixer etc complete as perspecification (i) Nominal mix (1:2:4)

OD13200/2025-2026:Supplying and fitting name boards of size 75x45cm made with GI plane sheet 1.25mm thick (classIIII) fitted with 35x35x4mm MS angle 2no. horizontally and 3no. vertically to make a frame for strengthening the GI sheet , fitted 2no. GI pipe verticaly 90cm above from ground level and fixing in cement concrete 1:2:4 , 30cmx30cmx30cm including cost and conveyance of all materials etc. cmplete .

OD13201/2025-2026::Printing New Letters and Figures of any Shade Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade as per drawings and Technical Specification Clause 1701 Malayalam ( commas and the like not to be measured and paid for. Half letters shall be counted as half only)

Sajeev PP (BID ID -2273937)

Bidder Name

Subin M P

Sajeev PP