Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹5.4 L
EMD Value
₹10,783
Closing Date
17 Oct 2026, 12:00 pm7d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
EXECUTIVE ENGINEER
76, DR. DEODAR RAHAMAN ROAD (3RD FLOOR)KOLKATA-700 033
Emergent repair of Amtala-Baruipur Road from Ch-1.300 km to 1.800 km by resetting of concrete paver block including new supply partially in main crust potion and other allied works in stretches under South 24 parganas Division, PWD during the year 20
2026_WBPWD_5076380_6
WBPWD/EE/S24PGSD/e-NIT 11/2026-2027
Open Tender
CIVIL WORKS
Percentage
South 24Pgs
Please refer Tender documents.
4 documents required · 4 mandatory
₹10,783
Yes
29 Sept 2026
29 Sept 2026
19 Oct 2026
7 Oct 2026
17 Oct 2026
7 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. | 54.45 | Sq.M | 51.54 | ₹2,806.35 |
| 2 | Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost). | 54.45 | Sq.M | 214.76 | ₹11,693.68 |
| 3 | Granular Sub-Base with Graded Material (Table:- 400-1)
B) By Mix in Place Method
Construction of granular sub-base by providing graded materials such as natural sand/crushed gravel/crushed stone/combination depending upon the required grading , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator and compacting with vibratory roller to achieve at least 98% of the maximum dry density for the material determined as per IS:2720 (Part 8), complete as per clause 401 desired density, complete as per clause 401
iii) Rate per cum for grading-III Material
Using Pakur Variety Stone Aggregates.
(Payment will be made on the basis of finished compacted volume) | 36.93 | Cu.M | 3,073.35 | ₹1,13,483.45 |
| 4 | Granular Sub-Base with Graded Material (Table:- 400-1)
B) By Mix in Place Method
Construction of granular sub-base by providing graded materials such as natural sand/crushed gravel/crushed stone/combination depending upon the required grading , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator and compacting with vibratory roller to achieve at least 98% of the maximum dry density for the material determined as per IS:2720 (Part 8), complete as per clause 401 desired density, complete as per clause 401
V) Rate per cum for grading-V Material
Using Pakur Variety Stone Aggregates.
(Payment will be made on the basis of finished compacted volume) | 36.93 | Cu.M | 3,111.83 | ₹1,14,904.32 |
| 5 | Supplying and Laying in the particular pattern of cement concrete block pavements with BIS certification and spacer nib of size and shape with aspect ratio as per IS 15658 with cement concrete grade not less than M40 on the prepared base course of specified CBR as mentioned in design and drawing with a cushion of bedding sand of 30 to 50 mm thick (grading of the bedding sand as per clause 6.5.1 of IRC SP-63) and filling up the gaps between two paver block with joint filling sand (the grading of the joint filling sand will be as per clause 6.5.2) complete as per IRC SP - 63 with proper confinement of bedding and joint filling sand, compaction,levelling and filling up of the edge gaps with mortar. Type I, II,III, IV should be as per design requeirment or instruction of E-I-C. a) Type - I (80 mm thickness) inter locking system | 142.16 | Sq.M | 1,473.66 | ₹2,09,496.98 |
| 6 | Add GST @18% | 4,52,384 | Not Applicable | 0.18 | ₹81,429.12 |
| 7 | Add Labour welfare Cess @1% | 5,33,813 | Not Applicable | 0.01 | ₹5,338.13 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.36 MB
2911.pdf
Tender Documents • 1.86 MB
BOQ_5170018.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .