KLC section 2 Running Contract

Amount

maintanance

17.15:Providing and fixing white vitreous china pedestal type (European type / wash down type) water closet pan.

17.78:Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre /8 litres), including seat cover, and cistern fittings, nuts bolts and gasket etc complete.

17.18.1:Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete.10 litre capacity - White

17.20.1:Providing and fixing solid plastic Seat with lid for pedestal type W.C. pan complete:White solid plastic seat with lid

17.25.2:Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings:Flat back wash basin of size 550x400 mm

17.28.1.2:Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC. waste fittings complete. Semi rigid pipe40 mm dia

17.28.2.1:Flexible pipe32 mm dia

18.51.1:Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore

18.53.1:Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore

18.74.1:Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, Collar and bush approved quality and colour .15 mm nominal bore with 30 cm length

50.17.1.4:Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.

50.18.7.3.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wall

50.18.7.4.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall

50.18.9.17.1:Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 6 Kgf/cm2 - External work - Exposed on wall

9.79.2:Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.50 mm

9.82:Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

9.88:Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

6.1.2:Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)

9.90.3:Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete.Size 65 mm

18.18.3:Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:25 mm nominal bore

50.18.7.6.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6 Kgf/cm2 - Internal work- Exposed on wall

21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides

21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness

21.12.2:Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0mm thick & 2100 mm long with S.S. screws etc. complete as per direction of Engineer -in-Charge.Powder coated minimum thickness 50 micron aluminium tubular handle bar

21.13:Providing and fixing 100 mm brass locks ( best make of approved quality ) for aluminium doors including necessary cutting and making good etc. complete

21.16.2:Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-Charge.Powder coated minimum thickness 50 micron aluminium

OD241167/2024-2025:Providing golden colour letter over the acrylic name board including cost of materials as per the direction of Engineer in charge

OD220091/2024-2025:providing and fixing 150mm C.P. brass swiveling shower including cost of materials, labour charge etc ( Base Cost of Shower shall not be less than Rs 900/-)

OD220097/2024-2025:providing and fixing C.P. brass telephonic shower including cost of materials, labour charge etc ( Base Cost of the shower shall not be less than Rs 1000/-)

OD220102/2024-2025:Providing and fixing C.P. brass two in one tap including cost of materials, labour charge etc (base Cost of Tap shall not be less than Rs 1200/-)

OD220095/2024-2025:Providing and fixing 15mm C.P. brass swan neck tap including cost of materials, labour charge etc( Basee cost of the Tap shall not be less than Rs.1750/-)

OD220100/2024-2025:Cutting and removing arayal growth over the parapet wall, roof slab etc inccluding all cost of rectifying materials, burying chemicals (acid , kerosene etc) and reoval of waste materials with in a distance of 150m away from site as per the direction of Engineer in charge

OD220090/2024-2025:Providing and fixing syphon innerset of flushing cistern of quality and make as approved by Engineer in Charge and the price of the same shall not be less than Rs 1650/- including cost of materials ,labour charge etc (for cascade type flush tank)

OD220107/2024-2025:Providing and fixing 20mm dia curtain bracket including cost of materials , labour charge etc

OD220105/2024-2025:Supplying and fixing acrylic name board 4mm thickness including cost of materials, letterin, boardering, fixing , labour charge and conveyance etc complete as per the direction of the Engineer in Charge

OD220087/2024-2025:Providing and fixing mosquito net including cost of materials, labour etc

OD220108/2024-2025:17.22 B Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (price of wall mixer shall not be less than Rs 4500/-) (a) 15 mm nominal dia

OD220099/2024-2025:Removing the waste cumulative materials from the yard by 15km lorry conveyance

OD220086/2024-2025:Engaging coolie for various works as per the direction of Engineer in charge

OD220096/2024-2025:Engaging carpenter for repair work

OD220092/2024-2025:Providing and fixing S.S aldrop150mm including cost of materials, labour charge etc as per the istruction of Engineer charge

11.36:Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

OD220103/2024-2025:Sticking computer cut vynyl sheet or fig. 2.5cm, 4cm or 5cm height ( block ,roman ,italic or Indian ) on the wooden board already fixed with all cost and conveyance

OD220093/2024-2025:cleaning blocked up silt pit of size 225 x 225mm by removing waste & other materials etc complete

17.72:Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms

OD220101/2024-2025:repairing shutters of doors ,windows, ventilators as per the directions of engineer in charge

OD220094/2024-2025:Engaging fitter for attending petty repair

OD220089/2024-2025:providing and fixing brass front door lock (cylinder type) of approved make (Price of Lock should not be less than Rs 3250/-) including cost of materials , labour charge etc complete

OD220104/2024-2025:Cleaning blocked up sewage line by removing waste and other materials including disposal in pit etc complete

50.17.1.1:Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

17.32.4:Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm

21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness

OD220106/2024-2025:Supplying and fixing 100mm S.S tower bolt including cost of materials,labour charge etc

OD220098/2024-2025:Cleaning blocked up and notworking sewer manhole of size 60 x 60cm up to 1.20m by removing waste matter ,night soil etc as per the direction of Engineer in charge

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

OD220109/2024-2025:Providing and fixing 6MM PLAIN GLASS including cost of materials,grinding, labour charge etc complete

14.78:Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- (i)Tank shall be emptied of water by pumping & bottom shall be cleaned of slit and other deposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. <br> (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.

A. NISAMUDEEN (BID ID -2192102)

R PADMAKUMAR (BID ID -2192113)

Bidder Name

R PADMAKUMAR

ANIL D

A. NISAMUDEEN