Const. of 50 Bedded Hospital alongwith Residence accommodation at Saraswati Khera Bhatmajra in Pehowa, Distt. Kurukshetra (Pdg. Street Light only).

Amount

(I)Wires and Cables Suply and erection of PVC copper insulated and sheathed 2-core circular flexible wire. Size 1.50 sqmm ( 48 / 0.20mm). HSR 31.9 (i) d

( c ) Moulded case Circuit breakers. Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. 15 Amp. to 60 Amp. 415 V ,10 KA 3-phase. HSR 31.12 c (i)

(L)Miniature Circuit Breaker and Isolator. Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. TP MCB of 9 KA breaking capacity 40 amp. to 63 amp. HSR 31.17(a) (iii)

TPN MCB of 9 KA breaking capacity 40 amp. to 63 amp. HSR 31.17(a) (iii)

(P)Pipe Laying. Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. Galvanised iron pipe 32 mm dia on surface. HSR 31.21 (iv)

Galvanised iron pipe 40 mm dia on flushed. HSR 31.21 (xii)

Heavy guage welded conduit pipe 20 mm dia 1.60 mm thickness flushed. HSR 31.21 (xxi)

(Q) Earthing Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required . HSR 31.22(i)

Extra for using salt and charcoal / coke for pipe earth electrode as required. HSR 31.22(ii)

Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required . HSR 31.22(xii)

Pdg. and fixing 4.00 mm dia G.I.wire on surface or in recess for loop earthing as required . HSR 31.22(xvi)

Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections . 10 Sq. mm 4 Core Cable . HSR 31.26 (xxxix) Ard.

25 Sq. mm 4 Core Cable . HSR 31.26 (xIi) Ard.

Supply and erection of suitable compression type brass cable glands for underground Cable. 10 Sqmm to 16 Sqmm Cable 2 to 4 Core . HSR 31.28 (ii)

25 Sqmm to 50 Sqmm Cable 2 to 4 Core. HSR 31.28 (iii)

( T )Street Light. Supply and erection of weather proof MS Box of size 20 cm x 15 cm x 10 cm. covered with 3.00 mm thick M.S.sheet hinged cover, locking arrangemrnt , housed in wall , including the cost of 1 no. 16 amp. 415 volts kit-kat and 2 nos. 63 amp. 415 volts neutral links fixed on hard wood board in the M.S.Box including painting and necessary connections . HSR 31.30 (IV)

(v) Pedestal . Supply and erection of Godrej Almirah type M.S.pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S.sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current . The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:- M.S.pedestal of size 750 mm wide , 900 mm high , 300 mm deep and bottom totally open , duly embeded in cement concrete block of size 900 mm x 450 mm x 200 mm above ground level duly plastered with 12 mm thick 1:4 cement plaster , having a base of size 1050 mm x 600 mm x 250 mm below ground level . HSR 31.33 (ii)

Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe. Size 1.5 sqmm (3 / 0.81mm). HSR 31.40 (i)

Supply and erection of double door sheet steel enclosures distribution boards suitable for MCBs and ELCBs etc. recessed in wall including bonding to earth with all labour and material requared complete the job in all respect upto the entire satisfaction of the Engineer-in Charge of the work. 4-way, TP & N (Vertical) (8+12) HSR 31.41 (ix)

Supply and erection of 50 mm diameter 1.5 mtr Long GI bracket (B - Class) making as angle 10 to 15 degree with horizontal plane for mounting stret light fitting on GI bracket on wall with 2 nos 50mm x 3 mm thick MS flat including cost of cuting welding of GI pipe complete with cement sand mixture bolts & nuts etc including necessary connection with all labour and material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. HSR 31.53

S/E of mark double walled corrugated (DWC) HDPE pipe laid 1 Mtr. Below ground level including digging and refilling of earth including cost of suitable size socket / cuppler for HDPE pipe including cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer in charge of work. HDPE 63/50 mm outer dia / inner dia HSR 31.67 ( i )

Supply & errection of Hot Dip Galavnized octagonal pole of 3mm thickness, with base plate including cost of nut and bolts and all accessories as supplied by manufacture including cost of foundation accessories etc. The foundation bolts as per manfacturer design should be hot dipped galvanized pole to complete with door locking arrangement.Terminal plate consisting of 2 nos. 100 A, 4 pole natural links including connection etc. with suitble connecting arrangement for 2 no. MCBs/ kit kat including cost of R.C.C 1:1. 5:3 for foundation size 0.7M x 0.7M x 1.8M with minimum of 8 nos 12 mm dia longitudinal MS reinforcement rods with rings of 8mm dia not more than 200mm C.C for fixing the pole with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of work. 8 Mtr. Long pole with top dia 70mm and bottom dia 135mm with base plate of size 225x225x16mm. HSR 31.68 (ii)

Supply and erection of LED Streetlight Luminaries 72 watt of Crompton make (Model No. LSTP-72-CDL) (NEXUS+) Aesthetically designed roadway luminaries with excellent thermal management complete the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer in Charge of the work (Equivalent model of Philips, Bajaj ). NS-1

Supply and erection of LED Flood Light 170 watt of Crompton make (Model No. LSFO-170-CDL/60) (SECURE) Rectangular LED Flood Light with innovative thermal management and available with multiple optics and equipped with IP66 protection complete the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer in Charge of the work (Equivalent model of Philips, Bajaj ). NS-2

Supply & Erection of Single arms bracket made of 40mm dia GI pipe B class ISI 1.50 mtr. Long with coller of GI pipe 75cm Long duly fitted on 7Mtr. Otacgonal pole and top covered with ornamental cap duly welded, painted 2 coats of aluminium paints on bracket and golden paint of ornamental cap including the cost of labour and petty material etc. to complete the job in all respect upto the entire satisfaction of Engineer-incharge. NS-3

Supply & Erection of Double arms bracket made of 40mm dia GI pipe B class 1.50 mtr. Long on each side with 25mm dia bottom pipe GI with coller pipe (GI) 75mm dia 60cm Long top covered with ornamental cap duly welded, painted 2 coats of aluminium paints on bracket and golden paint of ornamental cap including the cost of labour and petty material etc. complete in all respect upto the entire satisfaction of Engineer-incharge. NS-4

Supply and erection of 25 watt LED Gate light, Bajaj Make, Model No. BLPTSP 25W NW LED (111741) LED Post top in spherical shape polycarbonate diffuser & IP65 protecsion and accessories required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work and equivalent make Bajaj, Crompton & Philips. NS-5

Supply & erection of enclosure for MCCB 32/63 Amp. Complete with labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of work. Make: GE, L&T, Siemens, Schneider Electric, ABB, Legrand. NS-6

Supply and erection of 32 Amp. 3 Pole/230V Astronomical automatic time switch of Cat No. TL032ASO alongwith contactor of required capacity movement controlled by precisaty quartz osciliation operation on main supply of continue to run on built in rechargeable nickel cadium cell for 150 hours in the event of power failure including cost of contractor complete in all respect upto the entire satisfaction of Engineer-in-charge of the work. Make: Hevells / Indo Asian / L&T. NS-7

N.K.Enterprises

Bakshi Brothers

m/s shajal electric wroks

M/s JSB Enterprises

MS Tiger Solar Light Trading Co.