SR to Switchgears of Jilla Seva Sadan-2 at Godhra Dist-PMS

Name of work :- SR to Switchgears of Jilla Seva Sadan-2 at Godhra Dist-PMS

Sr. Ratein Rs. Per

Qty. Unit. Description. Amount.

No. Figure Words .

Replacing old & us Mains by 236.34 Rupees Mt

providing and erecting Mains Two r

with ISI marked, 1.5KV grade hundred

electrolyte multi stranded, Thirty Six

annealed copper conductor Paise

with heat resistant PVC Thirty

insulated conforms to IS 694, Four Only

IEC - 227 erected in existing

pipe of following size

(Specifically for control panel,

relays, power switchgears,

motor starters & control

wiring) with required size of

copper lugs, nuts and bolts if

required.(h) One wire

sq. mm [Make:- Finolex,

Havells, RR Cable, Polycab,

KEI, Apar, Greatwhite]

(j) One wire 50.00 sq. mm 470.66 Rupees Mt

30 Mtr 1(b) Seventy

Replacing old & us FPMCCB 6173.12 Rupees Ea

by Providing and erecting Six

Approved make Four pole Thousand

moulded case circuit breaker One

having breaking capacity ICU hundred

of 25 KA. at 415 V,having Seventy

normal current rating up to Three

25 A to 100A. with Fixed Paise

thermal & magnetic release Twelve

90 Nos 2 suitable to work on A.C. Only

supply 50 c/s. with all

internal connections,

spreader tinned copper &

complete erected in existing

16 G.M.S. housing.ICS=100%

of ICU only.Cat-III [Make:-

L&T, Hager, Havells, C&S,

Siemens, Legrand, Schneider

Replacing old & us FPMCCB 8055.76 Rupees Ea

by Providing and erecting Eight

Approved make Four pole Thousand

moulded case circuit breaker Fifty Five

having breaking capacity ICU Paise

of 35 KA. at 415 V. having Seventy

normal current rating 125A. Six Only

with Fixed thermal &

magnetic release suitable to

work on A.C.supply 50 c/s.

with all internal connections,

spreader tinned copper &

complete erected in existing

16 G.M.S. housing.ICS=100%

of ICU only.Cat-III [Make:-

L&T, Hager, Havells, C&S,

Siemens, Legrand, Schneider

Replacing old & us FPMCCB 25228.79 Rupees Ea

by Providing and erecting Twenty

Approved make Three pole Five

moulded case circuit breaker Thousand

having breaking Two

capacity/strength ICU of 50 hundred

K.A. and above at 415 V Twenty

having Normal current rating Eight

400A.with variable Thermal Paise

1 Nos 4 & magnetic release suitable to Seventy

work on A.C.supply 50 c/s. Nine Only

With all internal connections,

spreader tinned copper &

complete erected in existing

16 G.M.S. housing.ICS=100%

of ICU only Cat-III [Make:-

L&T, Hager, Havells, C&S,

Siemens, Legrand, Schneider

Replacing old & us Copper 3202.71 Rupees Rn.

Busbar by Supplying and Three Mt

erecting triple pole & neutral Thousand r

440V / 500V panel mounting Two

Copper Busbars with four hundred

equal Nos. of electrolyte bus Two

having current density not Paise

more than 1.6 Amp. / sq.mm Seventy

(Rated current / cross section One Only

Rn. area) duly wrapped with

Mtr colour insulating tape for

phase sequence of following

current carrying capacity,

erected with necessary bus

bar supports /insulators,

main cable socket to each bar,

erected in existing cubical

panel with necessary

connections.(B) Suitable for

200 Amp. capacity

(D) Suitable for 400 Amp. 7319.47 Rupees Rn.

Rn. capacity Seven Mt

Replacing old & us G.I.Wire 77.77 Rupees Kg

by Providing and erecting Seventy

HOT deep Galvanised iron Seven

15 Kg 6 strip wire 8 to 16 SWG. Paise

Replacing old & us Earthing by 4591.46 Rupees Ea

Supplying & erecting earth pit of Four

minimum bore dia.150mm size Thousand

approved make Earthing Five

Electrode consisting Pipe-in- hundred

Pipe Technology as per IS 3043- Ninety

1987 made of corrosion free hot

dipped G.I.Pipes having Outer

pipe dia of 50mm having 80-

200 Micron galvanising, Inner Forty Six

pipe dia of 25 mm having 200- Only

250 Micron galvanising,

connection terminal dia of

12mm with constant ohmic

value surrounded by highly

conductive compound with high

charge dissipation suitable for

following type of applications

with chamber and heavy duty

cover. (A)(approved make OEM

has to submit test certificate

including value of earth

resistance of installation duly

stamped and signed by agency

and officer Incharge has to

ensure the value of earthing

resistane mentioned in test

Certificate) & having back filling

compound of (B) Inner chemical

(CCM Compound)- Resistivity:-

0.2 ohm / meter testing as per

IEC 62561-2017, Voltage drop:-

< 1 volt at no load & dry form,

Sulphar content:- <2%

(C) Back fill Compound :-

Earthing compound should be

capable to retain moisture for

long time Necessary test

report must be submitted by

Agency.(a) For Electrical

Installation up to 440V in

normal soil Length of pipe -

Mtr Back filling compound -

Nos Bag of 15 Kg.

Replacing old & us Cubical Panel 10468.65 Rupees Sq.

board by Providing & erecting Ten Mt

weather proof, dust & vermin Thousand r

proof, floor mounted front Four

operated indoor type cubical hundred

panel board necessary IP-42 and Sixty

above protection as per

approval from engineer incharge

made from 14 SWG thick CRC

M.S. sheet for outer body & Sixty Five

doors, 16 SWG thick CRC Only

M.S.sheet for internal partitions

with necessary accesories

supporting angles/ flats channel

including cutting, bending,

drilling, welding, riveting with

internal partitions & cable alley

as per requirements &

Sq. instruction of engineer-in-

Mtr charge with erection of supplied

switch gears, BUSBARS, suitable

size of inter connecting PVC

copper wire / copper-aluminium

strips, rubber grommets, rib,

bakelite control fuses/MCB for

measuring instruments, earth

bus & earth bolts, foundation

flange - bolts-base Plates,

sufficient nos. of hinged doors,

handles with locking

arrangement and rubber

gasket,heavy duty end terminal

connection,danger notice

board,necessary

ventilation,earthing strip

complete. The Panel shall be

painted with epoxy powder

(The rates excludes the cost

of switchgears, bus bars, inter

connecting mains & Copper

Aluminium strips, meters,

Fuses etc. The dimension

shall be measured excluding

base beams) The panel shall

be supplied with following

approved manufacturers with

following size.(A) locally

fabricated panel board.(i)

with 350 mm depth

Providing and erecting 378.75 Rupees Mt

XLPE(IS:7098)(I)-88 ISI Three r

armoured cable multistrand hundred

Aluminium conductor for 1.1 Seventy

KV. to be laid on wall with Eight

necessary clamps or in Paise

existing trench / pipe of Seventy

following size of cables (D) 3 Five Only

1/2 core 70 Sq. mm ( 35 Sq.

mm 1/2 core)[Make:- L&T,

Hager, Havells, C&S, Siemens,

Legrand, Schneider Electric]

(G) 3 1/2 core 150 Sq. mm ( 731.24 Rupees Mt

70 Sq. mm 1/2 core) [Make:- Seven r

L&T, Hager, Havells, C&S, hundred

Siemens, Legrand, Schneider Thirty

Providing and, fixing heavy 103.02 Rupees Ea.

duty flange type brass double One

compression type cable hundred

gland with rubber ring for Three

6 Nos PVC insulated armoured cable Paise

complete with out going tails, Two Only

insulating tape etc for

following size of cables.(C)

& 1/2 core 70 Sq. mm

(F) 3 & 1/2 core 150 Sq. mm 190.89 Rupees Ea.

Solder less crimping type 20.20 Rupees Ea.

Aluminium lugs conforming Twenty

to IS suitable for cable of Paise

following size evenly crimped Twenty

11(a with high pressure tool & Only

) connected to switchgear

brass/cadmium plated nut

bolts in an approved manner.

(E) 70 Sq.mm. 25.25 Rupees Ea.

(H) 150 Sq.mm. 61.61 Rupees Ea.

Supplying and erecting 1275.63 Rupees Ea.

approved make panel One

mounting type Digital Thousand

4 Nos. 12 Voltmeter having 3 digits LED Two

display, 0 to 750 AC Volts hundred

range erected on existing Seventy

panel board with all Paise

connection, wiring etc .with Sixty

manufacturers calibration Three

certificate. Only

Supplying and erecting 1558.43 Rupees Ea.

approved make panel One

mounting type Digital Thousand

Ammeter having 3 digits Five

LED display, external CT hundred

operated, calibrated for 0 to Fifty Eight

4 Nos. 13 1000 Amps suitable to Paise

operate on 500 Volt AC , Forty

erected on existing panel Three

board with all connection, Only

wiring etc .with

manufacturers calibration

Supplying and erecting 317.14 Rupees Ea.

Ammeter / Voltmeter Three

selector switch for 3 phase AC hundred

8 Nos. 14 Supply 500 V on existing Seventee

panel board with necessary n Paise

connections. Fourteen

Providing & erecting L.T. 274.72 Rupees Ea.

Current Transformer with bar Two

primary 50/5 to 1000/5 ratio hundred

15 VA burden erected in Seventy

existing CRCA box duly Four

secured with insulating Paise

materials connected to the Seventy

Supplying and erecting 43.43 Rupees Ea.

approved make suitable panel Forty

indicator LED type lamp, lens Three

12 Nos. 16 cover, complete erected with Paise

necessary connections. Forty

I am / We are willing to carried out the work at ____% Above/below _____________________

______________________________________% (Should be written in figure and words) of the

estimate rates mentioned above. Amount of my/our tender work out as under.:

Estimated Amount Estimated Amount

Put to Tender Rs.________________ Put to Tender Rs.________________

(a) I/We hereby declare that I/We have visited the site and fully exquisite myself/ourselves with

the local situation regarding materials, labour and other factors pertaining to work before

submitting tender.

(b) I/We hereby declare that I/We have carefully studied the conditions of contracts, Detailed

specification and other tender document of this work and agree to execute the same

Note 1) The Rates are The Rates are including all taxes, transport charges,storage charges,except

: GST and applicable GST will be paid.

2) The materials covered under contractor should be got approved from the Dy. Executive

Engineer, in charge of the work.

3) The materials and work shall have to be used and carried out as specification in technical

4) All works shall be carried out as per public works Department hand book and Other

specifications of the Dn. Or as directed.

5) Rates are inclusve of 1% Labour cess in tender amount so 1% of total amount of bill will be

5) Rates are inclusve of 1% Labour cess in tender amount so 1% of total amount of bill will be

deducted from the bill.

6) The material to be used in this work should be approved strictly from Engineer-in-charge /

Deputy Ex. Engineer as applicable.

7) The agency will have to agree to carried out the work as per brand demand of concern

8) Credit of Dismentalled Material to be retained by Agency & cost of Dismentalled Material

Rs.NIL19,945/- will be recoverd from the bill.

(Signature of Contractor) Deuty Executive Engineer

Godhra Electrical SubDivision,

R&B Deptt.,Godhra.