Construction of 4 units of Type-IV quarters, 2 units of Type V officer bungalow and improvement of quarter works under ADEN HQ

B-ALL ITEMS USSOR 2021 Railway Formation works,Bridge work,& P

Item Breakup - A-All Items of CPWD-DSR-2023

40 gms 18.65 Providing and fixing PTMT soap Dish Holder Each 10 111.45 1114.5 having length of 138mm, breadth 102mm, 196 height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. 19.0 DRAINAGE 19.1S STONE WARE PIPES AND FITTINGS Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture 19.1 of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 197 19.1.1 100 mm diameter Metre 170 443.6 75412 198 19.1.2 150 mm diameter Metre 98 695.8 68188.4 199 19.1.4 250 mm diameter Metre 170 1505.6 255952 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand :10 graded stone 19.2 aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 200 19.2.2 150 mm diameter S.W. pipe Metre 40 1179.85 47194 201 19.2.4 250 mm diameter S.W. pipe Metre 170 1590.55 270393.5 JODHPUR DIVISION-ENGINEERING/NORTH WESTERN RLY Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand :10 graded stone 19.3 aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 202 19.3.2 150 mm diameter S.W. pipe Metre 63 743.1 46815.3 Supplying and fixing C.I. cover without frame 19.18 for manholes : 19.18.2 500 mm diameter C.I. cover (medium duty) Each 11 3441.2 37853.2 203 the weight of the cover to be not less than 58 kg Providing and fixing in position pre-cast R.C.C. 19.19 manhole cover and frame of required shape and approved quality 19.19.3 H D - 20 204 19.19.3.1 Circular shape 560 mm internal diameter Each 16 1675.7 26811.2 Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal 19.21 size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : 205 19.21.2 For pipes 250 to 300 mm diameter Each 6 922.4 5534.4 21.0 ALUMINIUM WORK 21.1S General Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket 21.1 etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent or Kg 40 495.05 19802 206 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings 21.1.2 wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.1 Anodised aluminium (anodised transparent or Kg 35 598.6 20951 207 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) JODHPUR DIVISION-ENGINEERING/NORTH WESTERN RLY Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in 21.2 aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. 21.2.1 Pre-laminated particle board with decorative Sqm 8 1139.3 9114.4 208 lamination on one side and balancing lamination on other side Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. 21.3 complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.1 With float glass panes of 4.0 mm thickness Sqm 16 1176.8 18828.8 209 (weight not less than 10kg/sqm) 21.17 Providing and fixing anodised aluminium grill Kg 35 638.35 22342.25 (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 210 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). 22.0 WATER PROOFING 22.1S General 22.14 Grading roof for water proofing treatment with 22.14.1 Cement concrete 1:2:4 (1 cement : 2 coarse cum 117 8042.3 940949.1 211 sand : 4 graded stone aggregate 20 mm nominal size) 26.0 NEW TECHNOLOGIES AND MATERIALS 26.73S PREFAB/PRECAST TECHNOLOGY Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws 26.86 having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). 212 26.86.3 Frame size 50 x 100 mm Metre 58 947.7 54966.6 213 26.86.5 Frame size 65 x 100 mm Metre 68 1111.3 75568.4 JODHPUR DIVISION-ENGINEERING/NORTH WESTERN RLY 214 26.86.6 Frame size 65 x 125 mm Metre 89 1381.6 122962.4 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N 26.87 (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. 215 26.87.1 30 mm thick Sqm 20 4346.7 86934 216 26.87.2 35 mm thick Sqm 20 5015.35 100307 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 26.88 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. 217 26.88.1 30 mm thick Sqm 30 4764.2 142926 218 26.88.2 35 mm thick Sqm 30 5432.85 162985.5 JODHPUR DIVISION-ENGINEERING/NORTH WESTERN RLY Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) 26.89 having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. 219 26.89.2 25 mm thick Sqm 20 3889.15 77783 Total 76681268.85

Item Breakup - B-ALL ITEMS USSOR 2021 Railway Formation works,Bridge work,& P Way works

JCB Backhoe Loaders 3DX Plus or similar with Hour minimum 1.10 cum bucket capacity Total 17280.40