Construction of Community hall at Semmangarai Colony in Thukkachi Panchayat

Amount

Name of the Work: Construction of Community hall at Semmangarai Colony H/O Thukkachi Panchayat

Earth work excavation for foundation in all clauses of soils and sub soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and boiling out water whenever necessary et complete complying with stand

Supplying and filling in foundation and basement with filling excavated earth in larges of not more than 15 cm thick well rammed watered and compacted Including & conveyance and all labour charges etc.,

Cement concrete 1:4:8 mix (one cement four sand and eight aggregate)using 40mm gauge hand broken granite tone jelly for foundation including dewatering if found ecessary and laid in layers of not more than 15 cm thick and compacted, etc., complete

Brick work in cm 1:5 mix(one cement and five sand) using country bricks 4 ground maded of size 23 x 11 x 7 cm including curing, finishing and cost & Conveyance of all materials etc., complete.

Supplying and erecting centering for sides Centering for soffits of RCC slabs of 5 plane surface like lintels, beams, etc., including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm

For Column Foundation

Column Upto Lintel Level

Supplying fabricating and placing in position of ribbed steel rods for 6 reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors etc., complete

RCC 1: 1/2 :3 mix using 20 mm ISS HBG metal for RCC items of work excluding items of works excluding centering, shuttering, and ost of reinforcement grill out including curing etc complete and also including fixing fan clamps and ixtures in rcc works

For Column Footing

Column Upto Roof Beam

Plastering with cm 1:5 mix(one cement and five sand) to 12 mm thick 8 including cost and conveyance of all materials in all floors etc., as directed by departmental officers etc, complete complying with standard specifications.

Supplying and painting the walls with two coats of wall putty as instructed by 9 the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications

Special ceiling plastering and finishing the exposed surface of all RCC Items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing alab etc., with Cement Mortar 1:3 (One Cement and Three 10 M.Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers

Providing weathering course with best quality of brick Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab, the proportion of brick jelly to lime being "32 to 12.5 well beated with wooden beaters for giving required slope and thickness

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water 12 proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg./sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) Using anti-skid tiles (Observed Data)

Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Dadooing walls with following best approved quality, white/colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg./sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthen ware of approved quality and brand with "P" or "S" trap conforming to BIS with crushed stone M.Sandcushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone M.Sandand Five brick Jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to Ci soil pipes (Including the cost of 100mm dia Cl pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof /floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).

Supplying and fixing P.V.C rainwater down fall pipe of 100mm dia with necessary shoes, bends, & clamps etc..

Distembering two coats of oil bound distember using one coat of primer coat including cost & conveyance to size and all labour charges etc., complete

Painting two coats with ready mixed Exterior Emulsion paint of approved qualityand colour over a priming coat, including through scrapping,clean removel of dirt etc complete.

Cost And Supply of Steel Doors(1.20*2.10)

Cost And Supply of Steel Doors(0.90*2.10)

Cost And Supply of Windows (1.20*1.30)

Painting two coats of new iron work with best quality synthetic enamel paint of 23 approved quality and colour with priming coat including the cost all materials etc.,complete, in all floors.

WATER SUPPLY ARRANGEMENTS

Cost And Supply Of 1000lit HDPE Tank

25mm Pvc pipe

25mm Pvc Bend

25mm Pvc Tee

25mmx15mm Pvc Reducer

15mm Pvc Tap

ELECTRICAL ARRANGEMENTS

Light Point-SD-17

Toilet Light Point-SD-17

Fan Point-SD-17

Plug Point-SD-36

Tube Light-SD 87

Ceiling Fan-SD 106

Street Light SD-94

CFL Bulp SD-80

GST Amount for providing Service to Government Contract Works for the above ConstructionWorks. GST Amount is the Total GST Amount for overall quoted amount above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

Suresh J (BID ID -1537031)