Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.6 LAccepted-AOC | L1 | Accepted-AOC L1 Accepted | |
| 2 | L2₹4.1 L+₹44,825 (12.3%)Rejected-AOC | L2 | Rejected-AOC L2 Rejected |
| Sl No | Description | Qty | Unit | M B VINOD KUMAR L1 | SINU K. SIMON L2 |
|---|---|---|---|---|---|
| 1.00Appendix-A | |||||
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 712.8 | kg | 180 ₹1,28,304 Lowest | 180 ₹1,28,304 Lowest |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 178.5 | kg | 170 ₹30,345 Lowest | 170 ₹30,345 Lowest |
| 1.00 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | 13.5 | metre | 450 ₹6,075 Lowest | 500 ₹6,750 |
| 1.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 174.66 | sqm | 750 ₹1,30,995 Lowest | 800 ₹1,39,728 |
| 1.00 | OD230188/2025-2026:Providing and fixing GI mesh(3mm) of approved design/pattern, with approved standard section and fixed to the existing frame with welding, including cutting the mesh to proper size for fixing , including all cost of materials labour, conveyance etc complete as per requirement and direction of Engineer-in-charge. | 58.9 | sqm | 970 ₹57,133 Lowest | 1,500 ₹88,350 |
| 1.01 | OD287060/2025-2026:Supplying and Fixing 8 inch uPVC Square pathy with clamb, End drop, End cap and square joint for rain water | 28 | metre | 450 ₹12,600 Lowest | 600 ₹16,800 |
Tender Value
₹4.5 L
EMD Value
₹11,226
Closing Date
9 Feb 2026, 3:00 pmClosed
Assistant Executive Engineer
O/o Assistant Executive Engineer , PWD Bld sub Dn EKM
Provisions included in this estimate are Sheet roofing steel work in built up tubular and mesh work etc office is not enough space to conducting meeting for the employees of the office to work
2026_PWD_833380_1
78/AEE/BL/EKM/2025-26
Open Tender
Civil Works - Buildings
Item Rate
Edappally
Please refer Tender Documents
7 documents required · 7 mandatory
₹990
₹11,226
17 Mar 2026
4 Feb 2026
11 Feb 2026
4 Feb 2026
9 Feb 2026
4 Feb 2026
Appendix-A
50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)
12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
OD230188/2025-2026:Providing and fixing GI mesh(3mm) of approved design/pattern, with approved standard section and fixed to the existing frame with welding, including cutting the mesh to proper size for fixing , including all cost of materials labour, conveyance etc complete as per requirement and direction of Engineer-in-charge.
OD287060/2025-2026:Supplying and Fixing 8 inch uPVC Square pathy with clamb, End drop, End cap and square joint for rain water
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1401487.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.05 MB
BOQ_1401487.xls
BOQ • 0.30 MB
viewsbd.pdf
Tender Documents • 1.63 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .