Renovation Work

General Notes: 1. Contractor shall inspect the site to acquaint with the site conditions as well as security conditions at AMD. 2. The rates quoted shall include cost of all tools and tackles, manpower including wages, liveries, all wastages and taxes GST, Labour cess, IT, etc., as applicable but exclusive of EPF and ESI . EPF and ESI are reimbursable as per relevant clause. 3. Tenderers shall visit the site the site on working days and upload site inspection report issued by the Departmental officer with seal and signature which is mandatory document without which the tender will not be considered for evaluation .

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as required, all complete as per the direction of the Engineer-in-charge

Dismantling tile work of thickness of tiles 10 mm to 25 mm in floors including skirting laid in cement mortar and Carpets /PVC Mat laid over floor iincluding stacking material within 50 metres lead as per the direction of the Engineer-in-charge

Taking out existing wooden/Aluminium door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Providing sun control film to the window glass panes of best quality approved make and colour including cutting into sizes fixing in position complete complete with cost of materials, labour, scaffolding, tools and plants all as per specifications and directions of Engineer-in-charge.

Providing and fixing f 15 mm thick tegular edged light weight calcium silicate false ceiling tiles.at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991,in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.

Replacement of Existing fixing false ceiling tiles at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on existing frame .The workshall be carried out as per directions of the Engineer-in-Charge

Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge.

Providing and laying double charge Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). complete as directed by the Engineer-in-charge

Providing & fixing Roller blinds of approved design of approved make. The system shall be chain operated roller system utilising a bi directional wrap spring clutch. Fabric shall be attached to the tube with an adhesive strip. Roller tube shall be extruded aluminum having thickness 1.50 mm and end plugs shall be spring loaded for easier installation complete with removing existing vertical blinds, cost of material, labour, transportaion, and as per specifications and as directed by the Engineer in Charge.

Removing white or colour wash, distemper, external paint by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete all as directed at site including scaffolding, cleaning of the areas.as per specifications and as directed by the Engineer in Charge.

Wall painting with premium acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. The rates also includes preparation of sufaces, filling with putty if required, scaffolding complete as per specifications and as directed by the Engineer-in-charge.

Providing and Painting two coats of synthetic enamel paint on Steel Surfaces of approved brand and manufacture to give an even shade without primer coat.including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge

Brick work with common burnt clay FPS (Non- Modular) bricks of class designation 7.5 in superstructure above plinth level up to floor five level in all shape & size in cement mortar 1:6 (1 cement : 6 coarse sand) :

Providing and applying 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand): as directed by the Engineer-in-charge.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as directed by the Engineer-in-charge.

Providing, fabricating & fixing openable shutters/table top made up of 12 mm thick plywood (green club/equivalent) conforms to IS 659 exterior grade, BWR board & termite proof having high dimensional stability including 1 mm thick lamination with one side decorative of approved quality shade & colour and other side balancing lamination grade 1, exterior grade IS 12823 marked. The edges of the shutters shall be lipped with matching PVC edge binding tape of approved quality including necessary synthetic resin hot pressed to edges on binding machine, including approved magnet catcher SS 304 handles for each shutters. The cost includes all materials, labour charges, tools, adhesive SH, synthetic resin,lipping tape, nails, screws, etc. all complete and as instructed by the Engineer-in charge.

Providing, fabricating & fixing openable shutters/table top made up of 18 mm thick plywood (green club/equivalent) conforms to IS 659 exterior grade, BWR board & termite proof having high dimensional stability including 1 mm thick lamination with one side decorative of approved quality shade & colour and other side balancing lamination grade 1, exterior grade IS 12823 marked. The edges of the shutters shall be lipped with matching PVC edge binding tape of approved quality including necessary synthetic resin hot pressed to edges on binding machine, including approved magnet catcher (one pair), SS 304 handles for each shutters. The cost includes all materials, labour charges, tools, approved special quality chromium plated brass cupboard locks, adhesive SH, synthetic resin,lipping tape, nails, screws, (excluding concealed hinges which shall be paid seperately under the respective item),etc. all complete and as instructed by the Engineer-in charge.

Providing, fabricating & fixing frames for openable/ sliding shutters/table top made up of 25 mm thick plywood (green club/equivalent) conforms to IS 659 exterior grade, BWR board & termite proof having high dimensional stability including 1 mm thick lamination with one side decorative of approved quality shade & colour and other side balancing lamination grade 1, exterior grade IS 12823 marked. The edges of the shutters shall be lipped with matching PVC edge binding tape of approved quality including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per specification and direction of E-I-C.

Providing fabricating and fixing 19 mm thick Sliding shutters for cup boards, comprising of following details and as per drawing & as directed by the Engineer-in-charge.

Fabricating sliding shutters of required size made of 19 mm thick block board (green club/equivalent ) conforms to IS 659 exterior grade, BWR board & termite proof having high dimensional stability including 1 mm thick lamination with one side decorative of approved quality shade & colour and other side balancing lamination grade 1, exterior grade IS 12823 marked. The edges of the shutters shall be lipped with matching PVC edge binding tape 2.00 mm thick of approved quality including necessary synthetic resin hot pressed to edges on binding machine, including fixing of the sliding system to the shutter ( sliding system shall be paid separately in the relvant item ) The cost includes all materials, labour charges, tools, adhesive SH, synthetic resin,lipping tape, nails, screws, etc. complete all as instructed by the Engineer-in charge.

Providing & fixing one pair of door bend adjustment rod fitings vertically for each shutters against the warping of shutters

Providing and fixing self adhesive brush sealing strip ( 2500 mm long ) at the outer vertical edges of each sliding shutter to fill the gap between the shutters in locked position.

Providing and fixing approved special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws per sliding shutters including approved 300 mm long SS handles per sliding shutters.

Providing and fixing aluminium tower bolts of size 200x10 mm ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete as directed by the Engineer-in-charge.

Providing and fixing bright finished 125 mm brass handles with screws etc. complete as directed by the Engineer-in-charge.

Providing and fixing premium quality Top line L advanced heavy duty SLIDING SYSTEM of approved make viz. Hettich/Hafale/equivalent make for 3000 mm track to accommodate for 3 sliding doors having carrying capacity of each door weight upto 50 KG (Max Door Dimension : Height 2600mm & width 550-1500mm) with silent system soft closing for 3 door including the 3 door runner set, guide set & fixing material for door thickness 18-30mm and 3000mm Runner profile and Guide profile with all the necessary complete kits, including cost of all materials labour, tools,transport, etc. complete all as per instruction and direction of Engineer in charge.

Providing and fixing stainless steel soft closing Concealed hinge having wide opening angle upto 165 degree (Zero protrusion hinge) with intergrated silent system with clip on installation, consists of base 12.5 (crank 0) with mounting plate of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge.

Dismantling wooden boardings /plywood of Thickness above 10 mm up to 25 mm in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead as per specification and direction of E-I-C.

Providing and fixing chromium plated brass butt hinges 75x65x4 mm (heavy type) with necessary chromium plated brass screws etc. complete.

Shifting of furnitures such as tables, chair, book shelves, etc. from the room to corridor before start the work and after completion of work same furniture will be shifted to room. Note: Files, computer disconnection, removal of files from almirah will be done departmentally..

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately)

Powder coated aluminium (minimum thickness of powder coating 50 micron)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing 12 mm thick Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

Providing and fixing double action hydraulic floor spring With stainless steel cover plate minimum 1.25 mm thickness of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.

Supplying, and fixing in position 1mm thick decorative lamination sheet of approved shade and colour manufactured by M/s Greenlam on M/s Silicone or equivalent approved make including fixing either single or two or more pieces in combination different colour/pattern to the plywood with Synthetic Resign of fevicol and cleaning the surface all complete with cost of materials, labour, tools plants, scaffolding all as per specifications and directions of Engineer-in-charge

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.

Supplying, laying and fixing in position 1.5 mm thick PVC sheet for flooring and skirting of approved shade and make to be laid on mosaic flooring using rubber based adhesives of approved quality and manufacturer including cost of Materials, labour, wastage, taxes etc,. all complete as direction of officer in charge

Renewing glass panes Frosted glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm), with putty and nails wherever necessary including racking out the old putty as per direction of E-I-C.

Removal of existing wiring in rooms/ sevice counter including removal of PVC/Steel Conduits, DB, Junction Box, Main wiring form MP Panel to SB, Switch boards, socket outlets, circuit/ point wiring etc (excluding Ceiling fans and Lights) after disconnection of mains and earth connections etc complete. The recess area of DB/ electrical boxes/ switch boards if any available after installing new DB/ switch boards is to be filled with cement concrete, necessary plastering & painting is to be done so as to match with the adjoining areas of wall on all sides, making the good, segregating and stacking the old removed items, including cost of materials, labour, tool & plants, taxes etc as per the instructions and directions of E-I-C.

Removal of existing Ceiling fan/Wall mounted fan after disconnection of power supply and earth connections etc complete, segregating and stacking the old removed items, including cost of materials, labour, tool & plants, taxes etc as per the instructions and directions of E-I-C.

Removal of existing tube Light/ ceiling lights after disconnection of power supply and earth connections etc complete, segregating and stacking the old removed items, including cost of materials, labour, tool & plants, taxes etc as per the instructions and directions of E-I-C.

Wiring for Group-C light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required.

2X2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire -

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing of 25mm of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of 40mm of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

6 Way Double door

12 Way Double door

Supplying and fixing 4 Way (4+12), Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/Isolator)

Supplying and fixing 40A rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 63 amps rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing Double pole, 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing Single pole, 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.

3 Module (100mmX75mm).

8 Module (125mmX125mm).

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 amps switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing of 20A, 240V, SPN industrial type socket outlet with 2 pole & earth, metal enclosed plug top along with 20A SP MCB, "C" Curve in sheet steel enclosure on surface/ in recess, with chained metallic over for the socket outlet and complete with connections, testing & commissioning etc. as required.

Supply, Installation, Testing and Commissioning of 1200mm ceiling fan with Brush Less Direct Current (BLDC) Motor, air delivery 210 CM/Min (Minimum), class of insulation: B, 3 nos. metal (Aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value ≥ 6.0 CM/Min/Watt, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Ceiling Fan compliant to IS 374:2019 fan Supply, earthing etc. complete as req

Supplying, installation, testing & commissioning of passive infrared (PIR) technology based occupancy sensor having high performance, non regulating programmable type, suitable for connected load up to 10Amp for mounting height up to 2.8 mtr and for 5m diameter coverage area along with necessary fixing arrangements i/c programming at site etc complete as required.

Supplying, installation, Testing & Commissioning of LED Panel light of 36 Watts, 2x2 ft. (System lumen efficacy ≥105 <120 lm/Watt) of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, freq 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED,Driver & electrical circuitry), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6000°K / 6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C).Powder coated die cast / Extruded aluminium Body (Thickness ≥ 1.20 mm) .

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

SRI SAI ENTERPRISES (BID ID -3318208)