Installation of Open Gymnasium at Kalikavu Ambalakunnu Ground in Kalikavu GP

Amount

2.31 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared

2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

4.3.1 Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

50.2.25.1 Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge

50.10.2 Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

10.25.2 Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

13.61.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

OD30839/2025-2026 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 meter or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

11.20.3 Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Dark shade pigment using ordinary cement

50.6.1.5 Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete

13.1.1 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) plastering masonry wall

13.43.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer same as that of plastering

13.60.1 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work same as that of primer

OD30840/2025-2026 Supplying and fixing Horse rider made up of GI pipes having 80 and 90 micron polyester powder coating with neolac or berger paint, with high quality fiber reinforced plastic closing cap, connected to foundation using MS nuts and J foundation bolts.Main frame 4.5 inch GI pipe, supporting frame 42 mm outer dia and 33 mm outer dia GI pipe

OD30841/2025-2026 Supplying and fixing ABS Bench made up of GI pipes having 80 and 90 micron polyester powder coating with neolac or berger paint, with high quality fiber reinforced plastic closing cap, connected to foundation using MS nuts and J foundation bolts.Main frame 4.5 inch GI pipe, supporting frame 42 mm outer dia and 33 mm outer dia GI pipe

OD30842/2025-2026 Supplying and fixing Rowing Machine made up of GI pipes having 80 and 90 micron polyester powder coating with neolac or berger paint, with high quality fiber reinforced plastic closing cap, connected to foundation using MS nuts and J foundation bolts.Main frame 4.5 inch GI pipe, supporting frame 42 mm outer dia and 33 mm outer dia GI pipe.

OD30843/2025-2026 Supplying and fixing Seated Twister made up of GI pipes having 80 and 90 micron polyester powder coating with neolac or berger paint, with high quality fiber reinforced plastic closing cap, connected to foundation using MS nuts and J foundation bolts.Main frame 4.5 inch GI pipe, supporting frame 42 mm outer dia and 33 mm outer dia GI pipe

OD30844/2025-2026 Supplying and fixing Cycle made up of GI pipes having 80 and 90 micron polyester powder coating with neolac or berger paint, with high quality fiber reinforced plastic closing cap, connected to foundation using MS nuts and J foundation bolts.Main frame 4.5 inch GI pipe, supporting frame 42 mm outer dia and 33 mm outer dia GI pipe.

OD30845/2025-2026 Supplying and fixing Tai Chi Spinner 2 Wheel made up of GI pipes having 80 and 90 micron polyester powder coating with neolac or berger paint, with high quality fiber reinforced plastic closing cap, connected to foundation using MS nuts and J foundation bolts.Main frame 4.5 inch GI pipe, supporting frame 42 mm outer dia and 33 mm outer dia GI pipe

OD30846/2025-2026 Supplying and fixing Stepper Machine made up of GI pipes having 80 and 90 micron polyester powder coating with neolac or berger paint, with high quality fiber reinforced plastic closing cap, connected to foundation using MS nuts and J foundation bolts.Main frame 4.5 inch GI pipe, supporting frame 42 mm outer dia and 33 mm outer dia GI pipe.

OD30847/2025-2026 Supplying and fixing Big Shoulder Wheel made up of GI pipes having 80 and 90 micron polyester powder coating with neolac or berger paint, with high quality fiber reinforced plastic closing cap, connected to foundation using MS nuts and J foundation bolts.Main frame 4.5 inch GI pipe, supporting frame 42 mm outer dia and 33 mm outer dia GI pipe.

OD30848/2025-2026 Supplying and fixing sky walker double made up of GI pipes having 80 and 90 micron polyester powder coating with neolac or berger paint, with high quality fiber reinforced plastic closing cap, connected to foundation using MS nuts and J foundation bolts.Main frame 4.5 inch GI pipe, supporting frame 42 mm outer dia and 33 mm outer dia GI pipe

OD30838/2025-2026 Fabrication supply conveyance and installation of Granite name board indicating the cost involved, commencement date, completion date and inaguration date etc.

T MEHABOOB RAHMAN (BID ID -2243234)

E Mohammedali (BID ID -2243241)