Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.4 LAccepted-AOC 232 1 D SHIVLOK KANKARKHERA DISTT MEERUT UP PIN 250001 | MEERUT | MEERUT | UP | 250001 | L1 | Accepted-AOC AOC | |
| 2 | L2₹30.5 L+₹28,636 (0.95%)Rejected-Finance C 247 1 RAJINDRA NAGAR BAREILLY 243122 UP | BAREILLY | UTTAR PRADESH | 243122 | L2 | Rejected-Finance BEING HIGH BID | |
| 3 | L3₹33.8 L+₹3.5 L (11.7%)Rejected-Finance 578 AVAS VIKAS JANAKPURI B IZATNAGAR BAREILLY 243122 UP | BAREILLY | UTTAR PRADESH | 243122 | L3 | Rejected-Finance BEING HIGH BID | |
| 4 | L4₹38.2 L+₹7.9 L (26.3%)Rejected-Finance R O 89 PRABHAT NAGAR NEAR RAM JANKI MANDIR BAREILLY 243122 UP | BAREILLY | UTTAR PRADESH | 243122 | L4 | Rejected-Finance BEING HIGH BID |
Tender Value
₹50.6 L
EMD Value
₹1.0 L
Closing Date
19 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Bareilly
HQ, CWE, MES, Station Road, Bareilly
CWE BLY/GE (E) /59 OF 2023- 2024 SPECIAL REPAIRS TO BLDG NO P-160 (01 TO 07) SINGLE OFFRS ACCN OF HQ MTN DIV UNDER GE (EAST) BAREILLY
2024_MES_637361_1
8200/B/777/E8
Open Tender
Civil Works
Item Rate
180 days
GE (East) Bareilly
As per NIT
6 documents required · 6 mandatory
₹1,000
GE (East) Bareilly
₹1.0 L
Yes
23 Mar 2024
13 Jan 2024
21 Feb 2024
13 Jan 2024
19 Feb 2024
5 Feb 2024
Amount
Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove.
Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.
Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.
Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing to store complete all as specified and directed.
Ditto - but exc 1.50 sqm and n.exc 4 sqm each -ditto -
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., removal from site complete all as specified and directed.
Taking up or down15 mm steel tubing and M&L 15 mm dia steel water tubing galvanized medium grade concealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed.
Taking up or down20 mm steel tubing and M&L 20 mm dia steel water tubing galvanized medium grade concealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed.
Excavating in post holes (or similar holes) each n. exc. 0.5 cum, gettting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc. 25 cm Soft and loose soil, watering and removing surplus soil to a distance n exc. 50 mtr and making good surface.
Dismantling water tanks exc 500 but not exc 1000 Litres, and M&L 1000 litres, rotational moulded polyethylene water storage tank three layered (Cylindrical vertical with closed top), hoisted and fixed in position complete all as specified and directed.
M & L for cutting chases of hanging chajjas, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of sunshades, shelves, lintels, Chajja ( up to IInd floor) etc making good, cutting out exc 10cm and not exc 40cm girth in RCC chajjas in brick walls complete all as specified and as directed.
M &L for PCC 1:2:4, type B-0 (using 12.5 mm graded stone aggregrate) as in laid over roof slab after applying cement slurry 3 kg/sqm for filling undulation finished even and smooth without using extra cement complete all as spd and directed.
M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:4, over RCC roof slabs for laying water proofing treatment mixed with using water proofing liquid @ 150 ml per bag of cement complete all as specified and directed.(Note : Water proofing liquid shall be measured and paid separately)
M/L for lean Cement concrete 1:5:10, type E-2 (using 40 mm graded stone aggregate ) as in filling, mass concrete for sunken floor complete all as specified and directed..
supply Integral water proofing Liquid conforming to IS specification complete all as specified and directd of Dr fixit/sika/Fosroc
M & L 25 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in sub bases, floor surfaces finished fair, even and rough to receive the top layer of floor complete all as specified and directed.
M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed.
M&L Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.
M&L for vitrified ceramic dark shade tiles 10 mm thick square/ rectangular) polished area of each tile not less than 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as spd
M&L for vitrified ceramic dark shade tiles 10 mm thick square/ rectangular) polished area of each tile not less than 0.36 sqm in vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed.
M & L glazed coloured ceramic tiles as in vertical surface 350x 450 mm/ 300X 600mm set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles over and including 15mm thick rendering in cement mortar 1:4 on other than fair faces of brick wall complete all as specified and directed .
M&L for vitrified ceramic exterior heavy duty out door coloured tiles 10 mm thick (Square/rectangular) polished area of each tile size not less than 0.36 sqm on floor set and jointed in neat cement mortar and pointed in white or coloured cement to match complete all as specified and directed
M&L 75 mm thick PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base floor / pavings and finishing the surface fair and even without using extra cement complete all as specified and directed
M&L Green Marble of work 20mm thick (table rubbed and polished) in treads and riser and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed.
M&L 16-18 mm thick Granite work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 10 mm thick in CM1:6 screed bed / rendering complete all as spd as directed. ( Note: Colour of Granite shall be approved by GE)
M&L Precast factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm) with and including necessary excavation & earth work complete all as specified and directed.
M & L for WPT in sunken floors as described here under:- (i) Sunken floor and sides up to finished floor level shall be plastered with 15 mm thick cement plaster in CM 1:4 mixed with water proofing liquid @ 150 ml per bag of cement . (ii) Preparing plastered surfaces and providing APP polymeric water proofing membrane , minimum 3 mm thick and weighing not less than 3.0 kg/ sqm black finish reinforced with non-woven polyster matt, with a thermo fusable finish laid over compatible bitumen primer at the rate of 0.40 Ltr/Sqm torching overlaps with a propane or a butane gas torch , with a over lap of 75mm at the sides and 100mm at the ends sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer's instructions including preparation of surface by removing the existing treatment, complete all as specified an as directed Note :- (i) Polymeric membrane shall be laid in sunken floor and on sides up to finished floor level. (ii) The waterproofing treatment shall be got carried out by the manufacturer or their authorised applicators. (iii) Above aspects are deemed to be included in quoted rate. (iv) Supply only water proofing liquid shall be measured and paid seperately
M&L Brick work with fly ash bricks (old size) as per IS 12894 -2002 straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, complete all as specified and directed.
M&L rendering 15 mm thick in CM 1:6 on brick masonry surfaces or on other than fair faces of brick masonry finished even and smooth witout using extra cement complete all as specified and directed.
M&L 10mm thick rendering in cement mortar 1:4 to brick masonry wall surfaces on fair faces of brick masonary finished even and smooth without using extra cement complete all as specified and directed.
M&L rendering 5 mm thick in CM 1:3 as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed .
M & L for 75mm thick PCC 1:3:6 , type C-2 (using 40 mm graded stone aggregate) as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed
M&L for reinforced cement concrete 1:1.5:3 type B-1 (using 20mm graded stone aggregate) as in slabs supported on wall like including bonding agent , complete all as specified (reinforcement to be measured & paid under respective items). (nominal mix) as in slabs supported on wall,landing, balconies, shelves and like including bonding agent , complete all as specified (reinforcement to be measured & paid under respective items).
M&L for RCC 1:1.5:3 type B-1 (using 20mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels & wall band over 1.5m span etc complete all as specified and directed.
M&L form work to chajja, slab ,weather shade, troughs and similar items including edges for flat rough finished surfaces of concrete flat, complete all as specified.
M&L form work to edges of concrete flats, treads, breaks in floors window cill, concrete railing opening in conc wall , floor and roof n.exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n.exc 20cm wide for flat rough finished surfaces of concrete, complete all as specified.
S&F TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia or securing with clips, complete all as specified and directed.
S&F Angle iron fencing post and struts including cutting tops to shape as directed drilling holes, notching for wire etc, flat iron fillets (for securing wire mess etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 410-0 or Fe 310-0 including round bars etc complete all as spd & directed.
Fixing only chain link fencing including line wire any mesh size and type of standards raills, starining bolts ewtc including provisioning of binding wire complete all as spd & directed .
Supply only chain link MS galvanised fencing any size or type complete all as specified and directed.
M &L PCC 1 :2:4, type B2 (using 40mm stone aggregate) as in filling and mass concrete complete all as specified and directed.
Formwork to sides of Rough finished surfaces of concrete of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as spd & directed .
Mild steel screw bots (machine made ) with hexagonal or square heads at one end and screwed the other each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 10 cm but not exc 15 cm and 15mm dia complete all as spd & directed..
S&F in replacement Framed work as in gates & Stairs of angle or other section with gusset plates, rails, braces, etc., complete,drilled for fixing of steel sheeting or other covering to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and fastening and fixing FE 290 Gde E-165 complete all as specified and directed.
Supply only Welded steel wire fabric weight exc 4 kg/sqm supplied and fixed complete to steel members complete all as specified and directed.
S&F Powder coated aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality, for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.00 mm thick glass & stainless steel wire messs fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below:- (i) Window frame :95x35mm X 1.155 mm thick for three tracks. (ii) Top / bottom rail and style / rail of shutter : 15x37.5x1.15mm thick and over. (iii) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. (iv) Aluminium fittings such aluminium suitable handle with auto interlocking closing (v) Fixed slot for window AC of standard size with removable Glass (vi) Making good of wall surfaces to match with existing surfaces complete all as specified and directed.
S&F aluminium alloy powder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5.50mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed (a) Frame 100x44x1.20mm thick with rawl plug (b) Middle/style rail : 85x44x1.20mm thick (c) Bottom/top rail : 114x44x1.20mm thick (d) Aluminium beading : 0.7mm thick (e) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver aluminium stopper, cleat double action floor spring hydraulically regulated made of n.less than 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other part of steel heavy duty. (f) Making good of wall surface to match with existing surface complete.
S&F Powder coated aluminium ventilators box type with louvers & wire mesh fixed with neoprene rubber gasket, aluminium beading, clips. Frame made with powder coated aluminium section of size as appended below:- (i) frame :65mm x35mm X 1.15 mm (ii) Aluminium beading - 0.7mm thick (iii) Glass louvers depth 6 inch. Blade Angle: 38 degrees and thickness of blade 2.02 mm with 106.25 mm spacing. (iv) Aluminium neccessary fittings complete as required basis. (v) fixed slot for exhaust fan with removable Glass. (v) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed.
Supply & fixing factory made WPC door frame 100% Solid (wood polymer composite) suitable Size Rebated ,made from wpc material comparising of virign PVC polymer of K value 58-60 (suspension grade ) calcium corbonate and natural fibers ( wood powder/rice husk /wheat husk) minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class 'A' category with property of being termite / borer proof, water / moisture proof & fire retardant & fixed in postion with SS dash fasterns / hold fast of required dia and length,colour of door frame to match that of shutter all as per specifications drawings complete all as specified and directed.
Supply & fixing 30mm solid thick termite proof, water proof and fire resistant prelaminated WPC factory made door shutter with one side having design pattern and other side plain .
S&F Powder coated aluminium box section in cupboard with side hung shutters fixed with & including aluminium composite panel LDPE core PET coating ( both side decorative type ) fixed to shutter frame with powder coated aluminium beading clip & rubber gasket inside of the cupboards , frame made of powder coated aluminium box section & shelf tops & verticle partitions made of alumnium composite panel fixed to frame with powder coated aluminium beading etc.Frame ,shutter, shelves & vertical partition shall be made of size & material as appended below complete all as specified & directed (a) Frame :- Powder coated aluminium box section 65x38x1.45mm thick, fixing with wall face to be done with powder coated aluminium angle cleats & powder coated matching colour S S screws. (b) Shutters:- (i) Middle and lock rail :Powder coated aluminium box section 85x44x1.48mm thick (ii) Bottom rail : Powder coated aluminium box section114x44x1.48mm thick.(iii) Top rail/style :Powder coated aluminium box section 114x44x1.48mm thick . (iv) Aluminium composite panel : 5.0 mm thick both side decorative type. (c) Shelves :- Frame : Powder coated aluminium box section 15 x37.5x1.15 mm thick in both horizontal & vertical sides, (ii) Aluminium composite panel : 4.0 mm thick both side decorative. (d) Powder coated aluminium beading : 0.7mm thick (e) Powder coated aluminium handle, tower bolt, (f) mortise lock 4 leaver of approved make.Making good of wall surface to match with existing surface complete.with neccessary fittings all as spd as directed (Note:-(i)Shelf area per sqm of front measerable area shall not be less than 3.10 sqm , design of shelf to be approved by GE (ii) measurable area only front face of shutter of cupboard only .Design / colour / pattern of aluminium composite panel & colour of powder coating shall be approve by GE )
S&F for Stainless Steel (AISI 304 grade ) non magnetic multilayer nickel chrome plated for multipurpose utensils container including frame work , telescopic channels , handles etc as reqd & complete all as specified and as directed, utensils sample , design & pattern of each basket to be approved by GE of following size in each kitchen :- (a) plate basket of size 510x470x100mm or 520x485x100 mm or 486X500X100mm -01Nos (b) multi size plate basket of size 510x470x150mm or 520x485x150 mm or 436 x 500 x200 mm (clear depth 500 mm) -03 Nos. (c) cutlery basket,with perforated bottom & side of compacted /slots for holding cutlery of size 510x470x100mm or 520x485x100 mm or 144x 468 x50mm ( clear depth 500 mm) -01Nos (d) multi basket of size 510x470x200mm or 520x485x200 mm or 486x500x200 mm -01 Nos, (e) Dust bin as required -01 Nos (g) Telescopic channels, handle etc as required complete all as specified and as directed. 9 as reqd incl frame work handles etc as reqd & all as spd, sample & design as approved by GE.Note:- Sample , make and design to be approved by GE.
S&F aluminium alloy powder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5 mm thick aluminium composite panel LDPE core PET coating ( both side decorative type ) fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed (a) Frame 100x44x1.48mm thick with rawl plug (b) Middle and lock rail : 150x44x1.48mm thick (c) Bottom rail : 150x44x1.48mm thick (d) Top rail/style : 85x44x1.48mm thick (e) Aluminium beading : 0.7mm thick (f) Aluminium handle D type 200 mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver , with S S hinges complete (g) Making good of wall surface to match with existing surface complete.
S&F aluminium alloy powder coated aluminium door frame fixed with side hung shutters and gauzed fixed with and including stainless steel wire cloth, 0.56 mm nominal dia of wire and average with of aperture 1.18 mm and fixed with stainless steel wire staples with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed (a) Frame 100x44x1.48mm thick with rawl plug (b) Middle and lock rail : 150x44x1.48mm thick (c) Bottom rail : 150x44x1.48mm thick (d) Top rail/style : 85x44x1.48mm thick (e) Aluminium beading : 0.7mm thick (f) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver , with S S hinges complete (g) Making good of wall surface to match with existing surface complete.
M & L powder coated aluminum window/ doors grills fixing along with frame of following specification, grills with opening 69.4mm X 78.2mm grills thickness shall be of 6.4mm X 5.8mm having weight not less than 2.306 Kg/per sqm shape as ordered with frame channel of 34 X 11mm X1.7mm thick fixed with screw inside of the window all as specified and as directed.
S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F in replacement stainless Steel plate rack of size 90x80x25cm made with 1.00 mm thick sheet including taking out existing wooden plat rack, complete all as specified.
S&F in replacement chromium plated brass tubular towel rail 20 mm dia, D type for wash hand basin centre holed fixed to iron pipe complete all as specified and directed.
S&F 100 mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed by Engineer-in-Charge.
S & F 150 mm thick Aluminium, anodised, barrel tower bolts of extruded section and fixed
S&F 150mm size aluminium handles, cast type anodised completed all as specified and directed.
S&F 300 mm long mild steel sliding door bolts plate type stone enamelled black with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed.
S & F fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified.
S&F fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with screws fancy type complete all as specified .
S & F in replacement fancy type brass CP shower rose all as specified.
S&F 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed
S&F in replacement fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified.
S&F in replacement 20 mm dia stainless steel 1.0 mm thick fancy type SS curtain rods with decorative design matching brackets as approved and knobs (lattu) or end bracket as required & other all neccesary fittings fitted with SS screws etc on each end complete all as specified and as directed. .
S&F fancy type 15mm dia chromium plated fancy type wall mixer hot & cold with long swan for WHB or Sink fixing and connection to pipes complete all as directed.
S&F in replacement 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed.
S&Fin replacement 15 mm dia bib tap fancy type chromium plated with flange quarter turn complete all as specified as directed.
S&F in replacement fancy type chromium plated brass two way bib cock suitable for 15mm bore pipe complete all as specified and directed. 2 Way Bib Cock with Wall Flange.
S&F CP tubuler towel rail 20 mm dia D type 60 cm long between flange complete all as specified.
S&F in replacement brass chromium plated wall mixer 3 in 1, 15mm for mixing hot & cold water screwd down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and as directed.
S & F Brass CP Hand Shower with 15mm Dia 1.2 Meter long flexible tube and wall hook screwecd for iron pipe fancy type long body complete all as specified and directed.
S & F health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including mking connections and fixed in position complete in all rest as specified
S&F in replavementVitreous China counter top oval type coloured wash basin suitable size including bottle trap ,but including waste pipe fixing on counter with stainless steel brackets complete all as specified.
S&Fin replacement Rimless Single piece-WC with UF soft close seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fittings, Size: 360 x 675 x 750 mm, S Trap-300 mm including making good to floor complete all as specified and directed.
S&F in replavementfancy type brass chromium plated toilet paper holder, complete all as specified.Make hindware or equivalent
S&F in replacement fancy type brass chromium plated soap dish of 160x160x90 mm , complete all as specified.
S&F in replacement fancy type stainless steel towel rack size 600mm long including a pair of brass bracket complete all as specified and directed.
S&F in replacement 0.8 mm thick stainless steel kitchen sink size 590x460x230mm undermount, single bowl (bowl size 540x410x230 mm) , incl waste pipe & SS coupling, washers etc. complete all necessary fittings all as specified and as directed .
S & F in replacement PTMT alloy toilet cabinet with mirror of overall size 350 x 450mm and fixed to wall complete all as specified and directed.
S&F in replacement PVC (SWR) floor trap 75mm dia outlet plain with grating including jointing with solvent cement including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed.
S&F PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.
S&F PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.
S&F PVC (SWR) 110mm bore bends any radius complete all as specified and directed.
S&F PVC (SWR) 75mm bore bends any radius complete all as specified and directed.
S&F PVC (SWR) 75 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and directed.
S&F Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified.
Dismantling of concrete by chiseling from RCC members like column , beam, parapet facia, chajja, ceiling,etc exposingthe reinforcement without disturbing the reinforcement free from rust by sand blasting/using chemical , apply a coat of rustolin to remove rust and acralic polymer on old rusted reinforcement proving at places addl reinforcement welding with existing reinforcement as directed wherever required binding RCC 50 mmx50 mm (10 mm gauge welded mesh ) & tack , securing with clips / blinding wire, welding & provision guniting pressure 2.2 to 2.5 kg /sqm with admixer 1 cement 3.5 of sand of thickness 25 to 40 mm including stripping floating with wooden strippers for proper dimension control neccssary form work & scaffolding up to three storey and including height of head room complete surface of guniting to be finished fair with 10 mm thick plaster in cement mortar 1:4 with water proofing compound @3% by weight of cement and construction fibre as per manufacturer instruction cleaning & removing of waste meterial etc as dirply two coat of Water proofing liquid at interval of 8 hours cure for the surfaces complete all as spd as directed
M& L for preparation of newly plastered wall surfaces and appltying three coats of texture (Domasc/Rustic) finished painting with the following process the surfaces should be completely dry and free from loose particles including preparing the surface with emry paper 180 nos and wipring clean and applying one coat of primer and allow drying for 6 to 8 hours then smoothen the surface by filling dints with thin coat of acrylie wall putty after drying for 4 to 6 hours and preparing the surface with emry paper and clean and applying another coat of primer and allow drying for 6 to 8 hours and then emulsion 1 Ltr with 500 ml water and applying with brush follwed by rolling with sponge roller or filter roller, applying three coat with brush and roller with and interval of 3 to 4 hours between successive coat all as per manufactures instruction complete all as specified and directed
M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed.
M &L in replacement stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement
M&L for complete removal of existing treatment on wall by scrapping with mechanical sander (having mechanical vaccum mechanism ) with sanding pad of appropriate grit to make surface clean ,free from dust ,loose paint etc by skilled labour and applying two coat OBD on wall with airless electric sprayers over a coat of primer applied using airless electric sprayer over one coat of wall care putty of 1mm thickness complete all as specified and directed. (Note:-Application to be done through authorised applicator of manufacturer.)
M&L for two coats OBD on newly plastered wall surface with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coat of wall care putty of 1mm thickness complete all as specified and directed. (Note-Application to be done through authorised applicator of manufacturer )
M&L for complete removal of existing treatment and applying of two coat OBD on ceiling with airless electric sprayers over a coat of primer applied using airless electric sprayers over a coat of wall putty of 1 mm thickness prepared and sanded with electrically operated sanding machine complete all as specified and directed. (Note-Application to be done through the authorised applicator of manufacturer)
M&L for preparation of new surface of plastered and applying of two coats OBD on ceiling with airless electric sprayers over a coat of primer applied using airless electric sprayers over two coats of wall putty of 1 mm thickness prepared and sanded with electrically operated sanding machine complete all as specified and directed. (Note- Application to be done through the authorised applicator of manufacturer)
M&L applying two coats of white putty on new surface and applying one coat of exterior water based primer by using Airless spray techonology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressue and paint usage and certified by paint manufacturer and as mentioned in PS and accessories fpr applying distemper, should be able to spray in hard to reach areas and penetration of distemper, on the surface to achieve excllent application using limited manpower complete all as specified and directed.
Demolition of Reinforced Concrete of any description and in any position not otherwise specifically provided for
Dismantling of chain link fencing of any description complete all as specified and directed
Dismantling posts or struct (wood , steel or RCC) any section including taking out embedded portion and making good disturbed ground post embedded in conrete,brickwork,masonry etc complete all as specified and directed
M&L for complete removal of existing treatment, preparation of old decorated plastered or unplastered surfaces of walls / roof projections including facia,cornices etc. and applying two coats of white putty and applying one coat of primer by using Airless spray techonology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressue and paint usage and certified by paint manufacturer and accessories for applying Primer, should be able to spray in hard to reach areas and penetration of Primer, on the surface to achieve excllent application using limited manpower complete all as specified and directed. (Note : - Sanding of old decorated surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer).
M&L for applying two coats of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti algae high performance exterior wall finish applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying exterior weather proof paint, should be able to spray in hard to reach areas and penetration of exterior weather proof paint on the surface to achieve excellent application using limited manpower complete all as specified and directed.
Taking down copper/aluminum point wiring complete including fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets, light fittings, holders etc and removing the items from site to store for taking credit (credit for above items should be made as per conditions separately ) and making good disturbed surfaces to match with the existing surfaces of walls, floors etc complete all as specified and directed.
Taking down, disconnecting of electric meter and refixing the same of existing location and connected to existing connection etc. after repair of building complete all as specified and dircted.
S&F in replacement panel board of suitable size 100 cm x100 cm x 26 cm or suitable size to accommodate 07 nos meter at one panel including internal wiring with suitable size made out of CRCA sheet 3 mm thick for indoor type factory made including two coat of synthetic enamel paint over a coat of red oxide , vermin and dust proof IP65 totally enclosed with front opering door with locking arrangement including godrej lock fixing into wall complete all as specified and as directed
Taking down main switch / MCB DBS including MCCBs etc of any size and removing the items from site to store for taking credit (credit for above items should be made as per conditions separately ) and making good disturbed surfaces to match with the existing surfaces of wall, floors etc complete all as specified and directed.
Taking down ceiling/exhaust fan and disconnecting, removing to store for keeping in safe custody for BER Board complete all as specified and directed.
Taking dowm submainwiring/service cable including earth wire and removing from site to store for taking credit (credit for above items should be made as per conditions separately ) and making good disturbed surfaces to match with the existing surfaces of walls, floors complete all as specified and directed.
Taking down electric geyser and refixing the same after cleaning & painting and remarking the serial MES nos etc.including electric connection with three core flexible PVC insulated copper conductor multistranded white in clour 2.5 sqmm cable including plug top complete all as specified and as directed.
M & L for point wiring for modular fittings with 1.5 sqmm cable PVC unsheathed and insulated copper multistranded conductor FRLSH 1100 Volts grade cable ( red colour cable to be used for live connection and black colour cable to be used for neutral connection ) controlled by one way switch drown through and including PVC concealed conduit with all accessories including 1.5 sqmm copper multistrand conductor FRLSH 1100 Volts grade unsheathed PVC insulated ( green colour ) continuity earth wire connected to common earth dolly and metal flush box for mounting of modular fittings and cover plate (Metal box , inner and outter cover plete ectd) shall be measured and paid seperately under respective items) including cuttings chases pinning in , for concealed coundit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and as directed following for one light point/fan/Exh fan /bell point controlled by one, one way modualr switch. complete as as specified and as directed.
All as per item No117 herein before but One 3 pin modular socket oultel 6 Amp on the same board with other switch
All as per item No-117 herein before but One 3 pin modular socket oultel 6 Amp independent
All as per item No-117 herein before but one light controlled by two , 2 way6 Amps modular switch
All as per item no- 117 herein before but 3 pin modular socket 16 Amps independent with 2.5 sqmm PVC insulated sheather cable and 2.5 sqmm cable for earth wire.
S&F in replacement modular cover plate with frame 1 module complete all as specified and directed
S&F in replacement modular cover plate with frame 2 module complete all as specified and directed
S&Fin replacement modular cover plate with frame 3 module complete all as specified and directed
S&Fin replacement modular cover plate with frame 4 module complete all as specified and directed
S&Fin replacement modular cover plate with frame 6 module complete all as specified and directed
S&F in replacement modular cover plate with frame 8 module complete all as specified and directed
S&F in replacement modular metal flush box 1 /2 module complete all as specified and directed
S&Fin replacement modular metal flush box 3 module complete all as specified and directed
S&F in replacement modular metal flush box 4 module complete all as specified and directed
S&Fin replacement modular metal flush box 6 module complete all as specified and directed
S&F in replacement modular metal flush box 8 module complete all as specified and directed
S&F modular switch piano flush type single pole one way 6 Amps 1 module
S&F modular switch piano flush type single pole two way 6 Amps 1 module
S&F modular Switch Piano flush type single pole one way 16 Amps 1 module
S&F bell push modular flush type 6A
S&F modular socket outlet 2 in 1, 3 pin 5 Amps flush type
S&F modular socket outlet 2 in 1, 3 pin 6 Amps and 16 Amps flush type
S&F bell ding done AC 230 volt single pole .
S&F lamp holder (battern/angle) PVC polycarbonate type with back plate for batten /agnle fittings.
S&F ceiling rose, 3 terminals, PVC polycarbonate isolated body.
S&F rechargeable lamp LED 15 W 220/230 Volt
S&F Telephone socket complete all as specified and as directed.
S&F in replacement Ultra slim LED MS Batten light fitting 1X20Watt , powder coated decorative end cap complete with retrofit poly carbonate glass tube LED 20W, 4' long including suitable electric connection with three core flexible PVC insulated copper conductor(multistranded) cable of 1.0sqmm from ceiling rose to batten complete all as specified and directed.
S&F in replacement LED tube light fittings 1x10 Watt 2 " long mirror type warm light , 220 V , AC decorative box type with driver holder including LED tube light connecting up with three core flexible PVC insulated copper conductor(multistranded) cable of 1.0sqmm from ceiling rose to batten complete all as specified and directed.
S&F in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.
S&F in replacement LED bulk head luminaire hexafit 10 watt LED environmental friendly , ultra modern , energy saving , surface mounted ,decorative hexagonal bulk head back lit LED luminaries comprising of high brrightness LED complete all as specified & as directed.
S&F in replacement LED decorative wall mounting type fittings opal polycarbonate diffuser suitable for 10W LED lamp complete all as specified and diretced
S &F in replacement LED building security light fitting 35 Watt,230 Volts, AC outdoor type with high pressure die cast aluminium housing and heat resistant polycarbonate cover complete with driver, lamp & IP 65/66 protection complete.
S & F stepped (socket/switch) electronic modular regulator 120 watt 240 volts 2 module complete all as specified and directed.
S&F ceiling fans 1200 mm sweep complete with blades, down rod , electronic regulator and accessories, 230 V, 25 watt to 36 watt , min air delivery 210 CFM with service value 6.00 BEE(Five star ) rated brushless direct current motor (BLDC) and marking the serial MES fan Nos etc inclding electric connection with three core flexible PVC insulated copper conductor multistranded cable 1.0 sqmm complete all as specified and directed.
S & F exhaust fan made out of study engineering plastic complete with louvers shutter , voltage 230 volts , 50 Hz, RPM 1200 copper winding of sweep 300mm including making suitable size hole in the wall for air flow and grouting of nuts & bolts and washers including making connection with three core copper cable of size not less than 1.5 sqmm from ceiling rose complete all as specified & directed.
S&F in replacement single pole and neutral enclosures haivng IP-67 protection with a three pin & earth plug with socket complete and one MCB SP-20 A , 230 C complete all as specified and directed.
S&F sub main wiring with 2 run FRLS PVC insulated and unsheathed multistranded copper condutor of nominal cross section area 2.5 sqmm alongwith one run of FRLS PVC insulated and unsheathed multistranded copper conductor of nominal cross secrtional area 2.5 sqmm as earth contuinity conductor drawn through in and including PVC condut complete all as specified and as directed.
S&F sub main wiring with 2 run FRLS PVC insulated and unsheathed multistranded copper condutor of nominal cross section area 4.0 sqmm alongwith one run of FRLS PVC insulated and unsheathed multistranded copper conductor of nominal cross secrtional area 4.0 sqmm as earth contuinity conductor drawn through in and including PVC condut complete all as specified and as directed.
S&F sub main wiring with 2 run FRLS PVC insulated and unsheathed multistranded copper condutor of nominal cross section area 6.0 sqmm alongwith one run of FRLS PVC insulated and unsheathed multistranded copper conductor of nominal cross secrtional area 6.0 sqmm as earth contuinity conductor drawn through in and including PVC condut complete all as specified and as directed.
S&F sheet metal enclousers (DBS) when MCBs to be used VTPN 4 way double door with 200 Amps rated bus bar with MCCB incommer .
S&F in replacement MCCBs 415V, 16 KA, 3 Pole 100-125 Amps all as specified and as directed.
S&F sheet metal enclousers (DBS) when MCBs to be used 8 way double door single pole & neutral with 200 Amps rated bus bar.
S&F in replacement MCB single phase and neutral 40-63A, 240Volt B- curve complete all as specified and directed.
S&F in replacement MCB SP 6A-32A, 240Volt B curve complete all as specified and directed.
S & F in replacement GI bracket made out from GI pipe 32/25mm dia, 1.2 mtr long bend to shape including 02 Nos 25x4 mm MS clamps,nuts, bolts washers fixed on wall & including painting etc complete.
S&F rigid non-metallic PVC conduit inclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.
M&L for cutting existing steel tubing upto 50mm dia and inserting suitable GI fittings etc for alteratoin/addition the branch connection complete all as specified and as directed.
Excacvation in trenches not exc 1.5 mtr wide and n exc 1.5 mtr in depth and getting out in soft/loose for laying cables complete all as specified.
Returning, filling in including spreading, levelling, watering and well ramming in layers n exc 25 cm in soft/loose soil complete all as specified and directed
Removing excavated material n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed
S&F in replacement GI Pipe 25 mm dia medium grade with and including all fittings complete all as specified and directed
Supply and fix in replacement gun metal gate valve with Iron wheel head screwed both ends for pipe 25mm dia complete all as specified and as directed.
Supply and fix in replacementt gun metal gate valve with Iron wheel head screwed both ends for pipe 20mm dia complete all as specified and as directed.
Taking down UNSV LT UG Cable and S&F and testing cable XLPE insulated scrrened PVC bedded GI steel strip or wire armoured electric power cable (heavy duty), 1100 Volts with stranded aluminium conductor of size 35 sqmm 3.5 core complete all as specified and as directed.
M&L in replacement for laying fly ask bricks for protection of cable, in trenches, laid in dry flat across the cable with length of whole bricks complete all as specified and directed.
Material and labour for river fine sand(local), washed and screened dry for cushioning to underground cable in trenches below and around underground cable including spreading and leveling punning complete all as specified and directed.
Boring of holes under road or cutting the road/path/pavement/hard standing or any other situation by mannual means for 50mm bore GI pipe for crossing the cable and making good both the ends all as specified and as directed at site. Note:- GI Pipe shall be measured and paid separately under respective item
Supply and fix tube 50 mm bore light grade GI with all fittings for cable protection for road crossing /culvert/path on wall/floor/pole across the road /path/culverts or laid in floor complete all as specified and as directed.
M/S Gupta Builders
UTTRAKHAND BUILDERS
MARUTI BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .