Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹15.4 LAccepted-AOC | 1 | Accepted-AOC Accepeted | |
| 2 | 2₹15.5 L+₹8,462.74 (0.55%)Rejected-Finance | 2 | Rejected-Finance Rejected |
Tender Value
₹13.4 L
EMD Value
₹26,760
Closing Date
12 Oct 2020, 5:00 pmClosed
Executive Engineer, Municipal Corporation Yamunan
Executive Engineer, Municipal Corporation Yamunan
Strengthening of Metal road from Jain Bakery to Ravi Hospital, Model Town Ward no. 08 Ynr
2020_HRY_146668_1
EE/MCY/CIVL/12OCT20/01-04
Open Tender
Civil Works
Works
60 days
Yamunanagar
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,180
Yes
Commissioner
₹26,760
Yes
15 Apr 2021
1 Oct 2020
13 Oct 2020
1 Oct 2020
12 Oct 2020
1 Oct 2020
Amount
P/L compacted stone metal (G-I) 63 mm to 43 mm gauge wearing coat to WBM using screening type B compacting with 3 wheeled roller/vibratory roller to achieve the desired density including lighting, guarding, barricading and diversion etc. Note: No local earth/natural occuring sand shall be allowed to be used as binding/screening.
P/L compacted stone metal (G-II) 53 mm to 22.4 mm gauge wearing coat to WBM using screening type B compacting with 3 wheeled roller/vibratory roller to achieve the desired density including lighting, guarding, barricading and diversion etc. Note: No local earth/natural occuring sand shall be allowed to be used as binding/screening.
Providing and laying 150mm thick granular sub base consisting of filter layer confirming to Table 400.1 Grading-III of MoRT&H 5th edition, mixing in a mechanical mix plant at OMC, carriage of mix material to the site of work, spreading in uniform layer with motor grader on prepared surface and compacting with vibratory power roller to achieve desired density complete as per clause No. 401 of MoRT&H specifications
Providing & laying tack coat 30 Kg with bulk bitumen on WBM surface with bitumen VG-10 grade.
Providing and laying compacted thickness of Dense Bituminous Macadam (DBM) in one layer by hot mix plant and paver finisher as per clause no. 508, and 113.3 of MORT&H specification for road and bridge works (IV Revision) of 2001/ latest edition using 4.50% to bitumen grade 60/70 as binder content by weight of total mix, complete in all respect including cost of bitumen instruction issued from time to time by MORT&H regarding machinery & bitumen will be followed strictly. The use of self propelled mechanical paver fitted with electronic sensor device conforming to MORT&H specification in mandatory.
Providing and laying 30mm thick in one layer (compacted) thickness of Bituminous Concrete as per clause no. 509, 113.30 of MORT&H specification for road and bridge work (4th revision) of 2001 latest edition using 5% bitumen of grade 60/70 as binder content by weight of the total mix complete in all respect including cost of bitumen Instructions issued from time to time by MORT&H regarding machinery & bitumen will be followed strictly. The use of self propelled mechanical paver fitted with electronic sensor device conforming to MORT&H specification is mandatory.
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area (N.S)
Bidder Name
Amount
SHUBHAM KUMAR(GSTN-NA)
Eeshaan Infrastructure(GSTN-NA)
SHUBHAM KUMAR
SHUBHAM KUMAR
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_196757.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .