SPECIAL REPAIR OF TOILETS AT SNCOs MESS AND SECURITY SECTION, SPECIAL REPAIR TO DSC GUARD POSTS AT HQ SWAC VSN CHILODA AND ADDN / ALTN TO BLDG NO P-187 AND P-176 AT VSN CHILODA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Taking down cement plaster on walls etc, including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for Rendering 10mm thick in CM (1:6) on block masonry surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing new surfaces and applying 2 coats of white wash on wall surfaces complete all as specified and directed.

All as per item No.4 here in before but on ceiling.

M&L 5mm thick plastering on brick/PCC block masonry or concrete surfaces finished even and fair (with out using extra cement) in CM 1: 3 on ceiling complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surfaces 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10mm thick backing coat in cement mortar 1:4, complete all as specified and directed.

M&L for Non - skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 SQM but not exceeding 0.38 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match,laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Demolition of brick work or stone masonary built in cement mortar including quoins, arches, pillars etc., and precast concrete articles and disposing off the rubbish materials outside MD land as specified and directed

M&L for brick work sub class B bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

S & F in repair vitreous china wash down water closet pan (pedestal pattern ) p or s type (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S&F in repairs Vitreous China urinals, bowl type complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S&F in repairs for 10 Ltr capacity PVC flushing cistern, low level, white, with inlet, ball calve, float and handle including brackets complete all as specified and directed.

S&F in repairs for vitreous china counter wash basin,white, flat back, ovel shape size 560 mm x 450 mm dia including brackets etc complete all as specified and directed.

S&F in repairs 32mm bore, waste coupling of PTMT (half or full treaded) (minimum weight 32mm-45grms) complete all as specified and directed.

S&F in repairs 32mm bore bottle trap of PTMT having minimum water seal of 25mm (minimum weight 32mm-260 gms) complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

All as per item No 17 here in before but 600mm length complete all as specified and directed.

S&F in repair 75mm dia of outlet PVC (SWR) floor trap with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid to wall complete all as specified and directed.

S&F in repair 75mm PVC (SWR) junction single, (single T) complete all as specified and directed.

S&F in repair 75mm PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair PVC (SWR) gully trap 125/110mm, setting and jointed with solvent cement complete all as specified and directed.

Taking up or down steel tubing 15mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15mm bore Galvanised steel water tubing medium grade galvanised with and incl all tube fittings and fixtures such as tees, elbows,diminishing pieces etc. complete fixed to wall and ceiling or laid in floors complete all as specified and directed.

S&F in repair Bib tap cast copper alloy 15 mm bore high pressure fancy type, screwed both ends for iron pipe for brass ferrule and fixed complete all as specified and directed.

S&F in repair 15mm bore Stop valve, cast copper alloy screwed down high pressure, fancy type, screwed both ends (externally threaded) for iron pipe or for union and fixed complete all as specified and directed.

S & F in repairs 15 mm size pillar tap swan neck long body, cast copper alloy chromium plated, fancy type, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

Taking down chowkhat or frame with shutter (w/o taking of shutter from the frame) area exceeding 1.5 Sqm but not exc 4 Sqm each complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC Sheet rainforced with MS square tube complete all as specified and directed.

S&F 100 mm cold rolled MS butt hinges, medium weight complete all as specified and directed.

S&F Aluminium handle cast type, anodised 150 mm long complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy, aldrop bolt 250mm long complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolt of extruded section, 200mm long complete all as specified and directed.

S & F in repairs hand shower (Health Faucet) brass chromium plated with 8 mm dia & 1 meter long flexible tube and wall hook complete all as specified and directed.

S & F in repairs brass Chromium plated 20 mm dia tubular towel rail 'D' type 600 mm long including taking down old towel rail complete all as specified and as directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repair 15 mm size Two way bib tap with wall flange complete all as specified and directed.

S & F in repairs grating doom 150 x 150 mm of brass chromium plated, complete all as specified and directed.

S&F in repairs 15 mm size brass chromium plated shower rose 125 mm dia with or without / swivel joints, fixed in position including taking down old shower rose complete all as specified and directed.

S & F in repairs Toilet paper holder of brass, chromium plated fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S & F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed of size 105 x 60 mm complete all as specified and directed.

S&F 35mm thick 2nd class HW plain framed, paneled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified and directed.

M&L for Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed.

S & F in repair aluminium powder coated ) min thickness of powder coating 50 micron of approved colour) ventilator , partially glazed and partially louvers , outer frame and mullion fafricated with aluminium section of size 82.50mm x 38mm x 1.70mm thick (Cat No. 20036 Jindal or equivalent) half portion glazed with 4mm thick froasted glass including rubber bedding and glazing clip half portion louveres of 80mm wide and 4mm thick frosted glass including aluminium louver patti including SS wire gaze for fixing of 0.36mm dia and 1.40 width aperturer with 25x3 mm thick aluminium strip with screw to upper half portion of ventilitor all fitting & fixture and fixed in position complete all as specified and directed.

Demolition of stone slabs & tiles of any thickness & in any position laid, bedded and pointed in any mortar complete all as specified and directed.

M & L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M & L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:4 complete all as specified and directed.

S&F in repairs 32mm PVC waste pipe for wash hand basin /urinal /sink 600mm long complete all as specified and directed.

Demolition of PCC of any description and in any position not otherwise specifically provided for and removing outside MD land complete all as specified and directed.

M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match premium quality as in floor etc and including screed bed 20mm thick in CM (1:6) complete all as specified and directed.

All as per item No 54 here in before but on vertical surfaces/skirting and including backing coat of 10mm thick in CM (1:4) all as specified and directed..

S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section complete all as specified and directed.

S&F Butt hinges 100mm size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21 complete all as specified and directed.

S&F Aluminium handles 100mm size, cast type, anodised complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

M & L for Rendering 5mm thick on fair faces of concrete surfaces in CM 1:3 finished even and smooth without using extra cement with WPC @ 3% by weight of cement. Note:- WPC shall be measured and paid separately.

Supply Only water proofing compound.

S& F 500 lit Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

M & L for Welding in repairs n. exc 2.5cm in length, Thickness of Metal to be welded Exc. 9mm but n. exc 20mm complete all as specified and directed.

M&L PCC 1:4:8 type D2 (40 mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM (1:6) complete all as specified and directed.

M&L rendering 10 mm thick CM 1:4 on other than fair faces of brick work or concrete surface complete all as specified and directed.

M&L rendering 15 mm thick CM 1:6 on other than fair faces of brick work or concrete surface complete all as specified and directed.

M&L for preperation of newly plastered surface of wall and applying two coat of plastic emulsion paint white or coloured tinted over a coat of primer including 3MM thick wall care putty complete all as specified and directed.

M&L preparation of new plaster surface of walls and applying two coat of cement base paint over a coat of primer complete all as specified and directed.

M&L for PCC 100 mm thick type D2, 1:4:8 using ( 40mm graded aggregate) as in sub base of floor complete all as specified and directed.

M&L PCC (1:2:4) type B-0 (Using 12.5 mm graded aggregates), as in flooring 25 mm thick. complete all as specified and directed.

M&L Granite, 20MM thick (of any colour) work (table rubbed and polished) in steps, landing, jambs, shelves, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S&F Stainless steel decorative curtain rod 20 mm dia including hooks including brackets complete all as specified and directed.

S&F Stainless steel decorative ball for 20 mm dia curtain road any size and Shape complete all as specified and directed.

S&F stainless steel Plate racks of size 750mm x 900mm x 230mm complete all as specified and directed.

Supplying and laying of CPVC pipes 16mm outer dia SDR 11 & Plain CPVC SDR 11 fittings in trenches or fixed in wall complete all as specified and directed.

S&F in repair 15 mm bore, long body two way bib taps cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 15 mm dia stop cock concealed type cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union but fancy type chromium plated complete all as specified and directed.

S&F in repairs 15 mm bore, long body swan neck pillar tap for Sink cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F 10MM thick toughen glass as shelves with brackets and similar work including cutting to shape, drilling holes required complete all as specified and directed.

S&F powder coated aluminium anodised glazed sliding type partition shutters with frame two track on top hanging made out from anodised aluminium frame of section 50x40x1.8mm thick with 12mm thick froasted figure glass sheet in glazed porion in partition shutter including all necessary jointing cleats glazing clip, rubber packing and aluminium snap beading, complete all as specified and directed.

Taking down shutter of any description exceeding 1 sqm and not exc 2 Sqm each and refixing in the same opening complete all as specified and directed.

Taking down Chowkats or frame exceeding 1.5 sqm . but n . Exc 4sqm each and removing to or from store complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt 150MM with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repairs Vitreous China EWC with seat cover and twin flush fitting white or Ivory colour, size 660x360x760mm including P or S trap, seat cover, fixing screws/ brackets and all connected fittings complete all as specified and directed.

S&F in repairs Vitreous China wash basin Table top, white or Ivory colour, oval shape, size 665 x495mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

M&L mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings confirming to Fe-410W(Gde E-250) (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L for Preparation of steel and iron surfaces exceeding 10cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxde zine chrome primer complete all as specified as directed.

S&F 2MM thick Fibre glass reinforced translucent plain sheet fixed with coach screw and washer in roof, wall etc complete all as specified and directed.

S&F in repairs PVC WC seat Cover white or Ivory colour complete all as specified and directed.

S&F Endura parking Tiles Size 300x300MM including 20MM thick Screed bed in CM 1:6 complete all as specified and directed.

S&F single lever wall mixer (3 in 1) exposed shower pipe, spout fitted with overhead rain shower, Telephonic hand shower and 1.5M flexible stainless steel hose fixed with hot and cold water mixer incl all fitting complete all as specified and directed.

S&F in repairs 15 mm bore CP central hole basin mixer with 450mm branded connection pipe complete all as specified and directed.

S&F in repairs health faucet brass body with wall hook and 1 mtere SS braided rubber hose pipe complete all as specified and directed.

S&F in repair stainless steel Towel rail 600 mm (24") complete all as specified and directed.

S&F in repair stainless steel Towel racks 450 mm long complete all as specified and directed.

S&F in repair CP toilet paper holder with flap guard complete all as specified and directed.

S&F in repair stainless steel soap dish 120mm x 80mm complete all as specified and directed.

S&F corner glass shelf (Large) 300x300mm complete all as specified and directed.

S&F Glass shelf 2 feet x 8 inch complete all as specified and directed.

S&F 5mm thick glass mirror size - 700x500mm with double coat for protection and logevity grounded edges for safety and liver plating on the back for better reflection complete all as specified and directed.

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in repairs aluminium (Dia cast) body door closer hydraulically regulated, designation No. 3, universal type,suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repairs stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs 18/19mm thick prelaminated particle board interior grade, prelaminated one sides with decorative choice laminations and other side balancing white lamination, fixed with screws to timber frame work or aluminum frame work complete all as specified and as directed.

M&L 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed including taking down old one to kitchen cabinet shutter of dimension as required, complete all as specified and directed.

S&F in repairs Magnetic catches Size not exc 50MM x 15MM, as specified and directed.

S&F Mild steel chromium plated handle of 100mm size for built in steel/wooden cupboard kitchen cabinet etc complete all as specified and directed.

S&F in repair continuous (piano) hinges, width of flaps 30 mm mild steel, bright finish or electrogalvanised complete all as specified and directed.

M&L 2nd class hard wood Plain fillets n exc 3 Sqcm. square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed.

Taking down carefully copper/ aluminum point wiring (Light, fan, socket, power and Bell) including fixture and fittings such as switches, sockets, ceiling roses, lamp, holder , regulators, sockets light fittings etc , removing material to store for keeping in safe custody or for taking credit , and making good disturbed surface of walls, floors, etc. complete all as specified and directed by Eng-In-Charge.

M&L for point wiring with 1.5 Sqmm single core PVC insulated unsheathed multi stranded copper conductor FRLS cable 1100V grade drawn through and incl PVC casing in capping /conduit with accessories like bends tees, junction boxes etc fixed recessed in wall or ceiling etc including 1.5 Sqmm single core PVC insulated but unsheathed multistrandard copper conductor FRLS cable 1100V grade as earth continuity wire incl sunken type pressed steel terminal boxes of size with 3mm thick bakelite steel white/coloured top cover for complete all as specified and directed by Eng-In-Charge. :- (a) One light point controlled by one switch.

All as per item No 112 here in before but one fan point controlled by one switch.

All as per item No 112 here in before but one 3 Pin socket out let 5 Amps on the same board.

All as per item No 112 here in before but one 3 pin socket out let 5 Amps on the independent board.

All as per item No 112 here in before but 2.5 sq mm wire for 15 amps power plug point complete all as specified and directed by Eng-In-Charge..

Supply & Fix in repair/replacement switch piano type 230 volts , 5 Amps, single pole complete all as specified and directed by Eng-In-Charge.

Supply & Fix in repair/replacement Socket out let 2 in 1, 3 pin, 5 Amps flush type 230 volts complete all as specified and directed by Eng-In-Charge.

Supply & Fix in repair/replacement switch socket combined universal 2 in 1, 6 pin, 15 Amps. complete all as specified and directed by Eng-In-Charge.

Supply & Fix in repair/replacement switch socket combined universal 2 in 1, 6 pin, 5Amps. complete all as specified and directed by Eng-In-Charge.

Supply & fix in repair/replacement angle holder, insulated body with back plate for battern fitting complete all as specified and directed by Eng-In-Charge.

Supply & fix in repair/replacement ceiling rose 3 terminal/ poly carbonate, isolated body complete all as specified and directed by Eng-In-Charge.

M&L in repair/replacement of sub main wiring complete with PVC insulated cable two run of 04 Sq mm (FRLS) 1100 volts grade with multi stranded copper conductor for drawn through and including PVC casing -capping with accessories incl 4 Sq mm unsheathed multi stranded copper conductor as on earth wire complete all as specified and directed by Eng-In-Charge.. Note :- Two runs of 4 sqmm cable with one run of earth continuity cable including PVC casing -capping and its accessories will be measured and paid as one unit

S&F in repair/replacement Casing capping patti of any size up to 50 mm dia including all its tee, bends etc of white/ivory/gray colour complete all as specified and directed by Eng-In-Charge.

Supply and fixing in repair/replacement sheet metal enclosure, single phase, double door DB, flush to wall mounting for MCB fitted with 200 Amp rated bus bars and neutral links ( without MCB's) 8 ways SPN complete all as specified and directed by Eng-In-Charge.

All as per item No 122 here in before but 4 way

Supply and fixing in repair/replacement MCB, SPN 240 volts, 32 Amps capacity complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair/replacement MCB, SP 240 volts capacity 5 - 32 Amps current rating, 10KA breaking capacity complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair/replacement blanking plate complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repair/replacement for LED tube light fittings 1x18Watts, 230 volts surface and wall mounted LED type, extruded thermoplastic body with polycarbonate diffuser & integrated electronic driver complete with all accessories internally pre wired and including connection up with twin core twisted flexible copper conductior cable of size 1.5 sqmm and flexible pipe of white colour from ceiling rose to light complete all as specified and directed by Eng-In-Charge.

Supply and fixing in repair/replacement for LED light fittings 1x10Watts, single side connection 230 volts surface and wall mounted LED type complete with all accessories internally pre wired and including connection up with twin core twisted flexible copper conductior cable of size 1.5 sqmm and flexible pipe of white colour from ceiling rose to light complete all as specified and directed by Eng-In-Charge.

Supply & fix in repair/replacement bulb retrofit type 9 watt LED bulb minimum lumens 900, suitable for 180 volt to 280 volt complete all as specified and directed by Eng-In-Charge.

Supply and fix LED security light 25 watt, 240 volt IP 65 protection ,weather proof,with all other accessories complete all as specified and directed.

Taking down ceiling fan/cabin fan/Exhaust fan/wall fan and dismantling fan blade, dismantling electric connection, removing capacitor, checking of bearings/bushes, cleaning the fan blades with clear water, scrapping the fan blades, placing the bearing, bush, capacitor, rewinding complete (rewinding, bush, bearing, capacitor, twin core, flexible cable will be paid under relevant items) reassembling the ceiling fan complete after greasing, oiling, testing the same & making the fan serviceable of any sweep and re-hanging and connecting up to the ceiling rose.

M&L for Re-winding in repair/replacement of ceiling/exhaust /wall fan motor of any type and size including removing old burnt wire copper wire as per existing gauge & insulated paper, varnishing also including replacement of bearing ,bush and capacitor with cleaning/greasing complete. Note:- Taking down & refixing of ceiling fan for winding, painting will be measured & paid separately.

Supply & fix in repair/replacement electronic regulator Socket type complete all as specified and directed by Eng-In-Charge.

M&L for painting one coat of ceiling fan /Exhaust fan complete as per existng colour with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning of dust etc of any sweep writing of MES No on ceiling/exhaust fan any sweep after painting with suitable size of stansile and super enamelled black paint complete all as specified and directed by Eng-In-Charge.

Supply and fix in repair/replacement exhaust fan 200/250 mm sweep silent type in PVC Body as required at site complete all as specified and directed by Eng-In-Charge.

Supply and fixing in repair/replacement MCB, SPN 240 volts, 40 Amps capacity complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repair/replacement cabin/wall/exhaust fan blade any sweep as existing. complete all as specified and directed by Eng-In-Charge.

Supply and fix in repair/replacement exhaust fan 300 mm sweep silent type in PVC Body as required at site. complete all as specified and directed by Eng-In-Charge.

M&L for point wiring modular accessories with modular metal flush box and cover plate with frame of suitable size complete with 1.5 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100 volts grade drawn through metallic rigid / PVC heavy duty concealed conduit/ casing capping/open coduit with 1.5 sqmm, single core, PVC insulated but unsheathed multistranded copper conductor FRLS cable 1100 volts grade as earth continuity wire terminated in new modular sunken boxes and modular metal flush box as required size at site incl all connected accessories , box made from not less than 1.6mm GI sheet factory made complete all as specified and directed by Eng-In-Charge. for the following. (a) One light/fan point controlled by one switch complete

All as per item No 139 here in before but one 3 pin socket out let 5 Amps on the independent board.

All as per item No 139 here in before but one 3 Pin socket out let 5 Amps on the same board.

All as per item No 139 here in before but with cable of size 2.5 Sqmm PVC insulated on independent board for power plug 15 Amps complete all as specified and directed by Eng-In-Charge.

S&F Modular switch one way 6A,1 Module, complete all as specified and directed by Eng-In-Charge.

S&F Modular switch one way 16A,1 Module complete all as specified and directed by Eng-In-Charge.

S&F Modular socket 6/10A-2/3 pin, 2 Module complete all as specified and directed by Eng-In-Charge.

S&F Modular socket 16/15A-2/3 pin, 2 Module complete all as specified and directed by Eng-In-Charge.

Supply & fix 3 pin plug top 16A, 240 V complete all as specified and directed by Eng-In-Charge.

Supply and fixing factory made single pole and neutral sheet metal enclosure AC box with a 3 Pin Socket plug and socket with one single pole MCB 240Volts, 20 Amps, capacity complete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED tube light fittings 1x20Watts, 230 volts surface and wall mounted LED type, extruded thermoplastic body with polycarbonate diffuser & integrated electronic driver complete with all accessories internally pre wired complete all as specified and directed by Eng-In-Charge.

S&F LED 18 watt cool white/warm white, surface mounted round/square shape down light with white powder coated polycarbonate housing and pressure dicast heat sink having high efficiency complete all as specified and directed by Eng-In-Charge.

S&F decorative wall mounting SS finish fixture with frosted glass suitable for 40 watt mini GLS E-27 lamp complete all as specified and directed by Eng-In-Charge.

S&F decorative bed side lamp any type, Including lamp upto 40 watt complete all as specified and directed by Eng-In-Charge.

Supply & fix wall mounted fan 400 mm sweep including complete connection complete all as specified and directed.

Supply & fix Heavy duty exhaust fans, AC single phase 230/ 240 V of size 300mm sweep, 1400 RPM with ”louver complete all as specified and directed.

Supply and fix outdoor Water heater storage type, electric,capacity 25 litres.BEE 5 star rated with all connected accessories complete all as specified and directed.

Supply and fixing ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE Five star rated with brushless direct current motor (BLDC) including remote complete all as specified and directed.

Shree Builders

Ramdev and Sons

Choudhary Traders and Engineers

ARTI CONSTRUCTION

divyarsh entrprise

DMA PROJECTS

boon construction company