REPAIR OF FENCING, COMPOUND WALL, FOOTPATH ETC AT MASIMPUR MIL STN UNDER GE SILCHAR

Amount

Dismantling of fencing wire mesh any type complete all as directed.

Dismantling of post or strut (wood, steel or RCC) any section, including taking out embedded in natural ground and making good distribution ground complete all as directed.

Dismantling of post or strut(wood, steel or RCC) any section, including taking out embedded in concrete and making good distribution ground complete all as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified.

Materials and Labour for cement concrete 1:4:8, type D2 using 40mm graded crushed stone aggregates as in foundation filling and mass concrete complete all as specified.

Materials and Labour for use and waste of form works rough finished surfaces of concrete side of concrete foundation, footing, bases of columns raft and raft beams sides and soffits if any of foundation and plinth beams and similar work flat, vertical or to batter complete all as specified.

Materials and Labour for use and waste of form works rough finished surfaces of concrete to side of pillars, posts, struts, piers, columns and stanchions for square, rectangular or polygonal complete all as specified.

Materials and Labour for TMT bars 10 mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified.

Supply and fix TMT bars 5mm dia & over upto & including 10 mm dia, cut to length, bent to shape required in stirrups, spacers & binders with and including mild steel wire annealed not less than 0.9mm dia or securing with clips complete all as specified.

Materials and Labour for RCC 1:1.5:3 type A1 using 20 mm graded crushed stone aggregate as in foundations, including rafts, footings, foundations beams, plinth beams, bases for columns etc. undreamed piles & mass concrete complete all as specified. Note:- Reinforcement and form work shall be measured and paid separetly.

Materials and Labour for RCC 1:1.5:3 type A1 using 20 mm graded crushed stone aggregate as in columns, pillars, piers, posts & struts complete all as specified. Note:- Reinforcement and form work shall be measured and paid separetly.

Materials and Labour for framed work as in steel gate framed and side hung including pintle hinges, stops, hand made sliding bolt monkey tail bolts etc. complete all as specified.

Excavating in post holes (or similar holes ) each not exceeding 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth round in layers not exceeding 25 cm in soft/loose soil complete all as specified.

Materials and Labour for Mild steel angle, flat work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc. conforming to Fe -290-GdeE-165 complete all as specified.

Supply and Fix TMT bars 10 mm as in tie rod cut to length bend to shape as required for fixing of chain link fencing complete all as specified.

Supply and Fix 10 mm dia MS screw bolts (machine made ) with hexagonal or square heads at one end & screwed the other or screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut length of bolt exceeding 5 cm & not exceeding 10 cm long complete all as specified.

Supply and fix Chain link fencing 4 mm dia galvanised steel wire, 75 mm x 75 mm mesh, made up into mattresses or cages, lapped, wired and laid/fixed in position, including line wires, any mesh, any size, any type of standards rails straining bolts etc including provisioning of binding wires complete all as specified.

Materials and Labour for preparation of steel surfaces of any description over 10 cm in width or girth not otherwise described and two coat of synthetic enamel paint over one coat of red oxide primer all as specified.

Supply and Fix in repairs for galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing's and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc. complete all as specified and directed (each line wire to be measured).

Materials and Labour for preparation of steel surfaces of any description not exceeding 10 cm in width or girth not otherwise described and two coat of synthetic enamel paint over one coat of red oxide primer all as specified.

Supply and Fix concertina coil (reinforced punched barbed tape single layer )fixed on 'Y' shaped angle over security fencing complete all as specified and directed . 1. Diameter of concertina coil: 600 mm. 2. Numbers of turns in concertina: 50 to 53 turns. 3. Weight of each coil- 9.5 to 10 kg. 4. Coverage per coil- 6 Rm. 5. Central core Wire - Made of high tensile spring steel core wire conforming to IS -4454 duly hot dipped galvanized (conforming to IS 2629) with diameter 2.59mm_+0.05mm ,UTS 145-160 kg/sqmm, zinc coating 250-300gms/sqm. 6. Strip :-Electro galvanised steel strip 0.5 mm_+ 0.02mm thick , width 19mm (before wrapping on central core wire ) conforming to IS-1573, zinc coating -120gms/sqm and bituminized dipped, width of barbes 11.5mm ,pitch of barbes 25.4mm_+0.20mm. 7. Clips :-AISI 304-1.5 mm thick C and U clips.'C' special type for fixing coil and RBT wire joining. 8. No of clips 125 for each coil. 9. Handle and spikes to be provided as required. Note :- Running length of the fencing shall be measured for payment purpose.

Material and labour for 15 mm thick rendering in cement mortar 1:4 on fair face of brick or concrete surfaces finished even and fair complete all as specified.

Material and labour for preparation of newly plastered wall surfaces and applying two coats of cement based paint over a coat of primer complete all as specified.

Material and labour for Rendering 15mm thick on fair faces of brick work or concrete surfaces with cement mortar 1:4 complete all as specified.

Materials and Labour for Brickwork with subclass ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, laid dry built in cement mortar complete all as specified.

Material and labour for PCC 1:2:4 type B1 using 20 mm graded crushed stone aggregates as in bed block, coping, cills, steps, kneelers, bed plates, apex stones kerbs and similar works including weathering, slightly rounded or chamfered angles and throating and necessary formwork all as specified.

Demolition of plain cement Concrete of any description and in any position not otherwise specifically provided for all as specified.

Supply and fix Reinforced concrete pipes 300mm dia, class NP3, laid and jointed complete with collars complete all as specified.

Material and labour for Concrete bed to drain pipes 300mm bore in PCC 1:3:6 type C2 using 40mm graded crushed stone aggregates including packing under, and haunching against the sides of pipes after they are laid and tested as specified.

Demolition and breaking up drain pipes 300mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified.

Materials and Labour for 300 x 300mm heavy duty Acid alkali Registered vitrified tiles as in floor set, jointed &pointed with neat cement slurry with white cement and pigment including 20mm thick screed bedding layer in cement mortar 1:6 over brushing with neat cement slurry with 3.00 Kg of cement per Sqm and dismantling of old unserviceable chequered cement concrete tiles all as specified. Make:- Endura of Johnson or Paver of Orient Bell or Dura stone of Somani

Materials and Labour for PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in coping over walls including necessary formwork complete all as specified.

Younus Khan

M/S Tahir Ali and Sons

M/S. N.A.BARBHUIYA

M/S R A ENTERPRISE

MS AFTAB LASKAR

SURANA CORPORATION