SPL REPAIR OF OLD UNSV SECURITY LIGHTS, LT CABLE AND CONNECTED WKs, PROVN OF ELECTRIC SUPPLY PANELS AND CONNECTED ITEMS AND SPL REPAIR OF DEFECTIVE FIRE DETECTOR, FIRE HYDRANT AND SOLAR WATER HEATER ACCESSORIES ALONG WITH CONNECTED WKs AT VSN CHILODA

Amount

Out going :- a) MCCB 4 Pole, current rating 125 Amp, With Thermal Magnetic release , breaking capacity 25 kA at 415V, 50Hz - 03 Nos. b) MCCB 4 Pole, current rating 100 Amp, With Thermal Magnetic release , breaking capacity 25 kA at 415V, 50Hz - 01 Nos. c) MCCB 4 Pole, current rating 63 Amp, With Thermal Magnetic release , breaking capacity 25 kA at 415V, 50Hz - 01 Nos. d) MCB SPN current rating 40 Amp, breaking capacity 10 kA at 230 V, 50Hz - 02 No e) MCB SPN current rating 32 Amp, breaking capacity 10 kA at 230 V, 50Hz - 04 No f) Angle iron base frame as reqd size as per above panel, total leg height 600 mm and grouting in side PCC 150 mm legs and made out of ISA 5050, 50 x 50 x 6 mm thick angle iron duly painted - 01 No. g) M & L for necessary excavation and as reqd PCC 1:3:6 (40 mm graded aggregate) Type C2 for foundation of angle iron legs frame work complete - 01 job

Out going :- a) MCCB 4 Pole, current rating 63 Amp, With Thermal Magnetic release , breaking capacity 25 kA at 415V, 50Hz - 02 Nos. b) MCB TPN current rating 40 Amp, breaking capacity 10 kA at 230 V, 50Hz - 02 No c) MCB SPN current rating 32 Amp, breaking capacity 10 kA at 230 V, 50Hz - 04 No d) Angle iron base frame as reqd size as per above panel, total leg height 600 mm and grouting in side PCC 150 mm legs and made out of ISA 5050, 50 x 50 x 6 mm thick angle iron duly painted - 01 No. e) M & L for necessary excavation and as reqd PCC 1:3:6 (40 mm graded aggregate) Type C2 for foundation of angle iron legs frame work complete - 01 job

M & L for Earthing complete in repairs with galvanised steel earth electrode 60 cm x 60 cm x 6 mm burried directly in ground vertically to a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below ground level connected to and including galvanised earth lead as eGI strip of 32X6mm dia by means of bolts,nuts, check nuts and washer etc made of galvanised iron and connected to earthing test point all as shown in electrical plate No.3 of SSR Part I 2009 and as specified or indicated and testing on completion including excavation/earth work in any type of strata, PCC (1:3:6) type C1 earthing chamber, precast RCC slab 50 mm thick in reinforced cement concrete (1:2:4) type B1 reinforced with welded steel wire fabric (XPM jali weight not less than 4 Kg/Sqm), cast iron frame, funnel with wire mesh, 40 mm bore medium grade GI watering pipe, lugs, 15 mm bore medium grade GI protection pipe, test point etc. complete all as specified and directed. Note: (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. Any addition in length shall be adjusted through deviation order. (ii) necessary excavation work is included in this item.

Excavation in trenches not exceeding 1.5m width and not exceeding 1.5 m in depth and getting out in soft/loose soil for taking up/laying cable/pipe etc complete all as specified and directed.

M & L for dry Sand cushioning to underground cable with screened, washed river sand, including punning gently complete all as specified and directed. Note: - Thickness after punning will be measured for payment.

Supply and laying reinforced precast concrete cable cover, class LV cover, Type I, flat, size 250mm x150mm x 40 MM complete all as specified and directed.

Returning, filling including spreading, leveling watering & well ramming in laying not exc. 25cm for not exc. 25 cm thick for soft/ loose soil complete all as specified and directed.

Removal of excavated material at a distance not exc 50 mtr and dipositing where directed at a level not exc. 1.5 mtr above the starting point for soft/loose soil complete all as specified and directed.

Labour only for boring under road/drain by manual method for inserting the light grade pipe GI tubing up to 100 mm dia for cable protection complete all as specified and directed by Engineer In Charge.

M&L for Laying in trenches in road cross / floors tube galvanished iron light grade 50 mm bore pipe with all fittings for protection of cable complete all as specified and directed.

Taking down / out underground cable of aluminium conductor of any size and core after disconnecting from sheet metal encloser / panel board and taking out from trenches including taking out brick cable cover complete all as specified and directed.

Supply and laying of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 120 sqmm 3.5 core laid in trenches / duct passing through pipe / duct/roof or fixed on wall including necessary clamp Nut and bolt and connecting and testing complete all as specified and as directed by Engr-in-Charge. Note:- Excavation / earth work will be measured and paid separately.

Supply and laying of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sqmm 3.5 core laid in trenches / duct passing through pipe / duct/roof or fixed on wall including necessary clamp Nut and bolt and connecting and testing complete all as specified and as directed by Engr-in-Charge. Note:- Excavation / earth work will be measured and paid separately.

Supply and laying of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sqmm 3.5 core laid in trenches / duct passing through pipe / duct/roof or fixed on wall including necessary clamp Nut and bolt and connecting and testing complete all as specified and as directed by Engr-in-Charge. Note:- Excavation / earth work will be measured and paid separately.

S&F 120 Watt LED street light luminarie new generation energy saving & environmental friendly long life versatile pressure die -cast aluminium IP66 road way luminarie with high power LED as light source and electronic driver, Secondary optical lens superior light distribtion, Efficacy 110 Lm/W, 5700 K, minimum pole dia 50 mm fixed on existing GI bracket with electric connections with suitable cable including taking down complete all as specified and directed by Engr-in-charge.

All as per item No 16 here in before but 90 watt complete all as specified and directed by Engr-in-charge.

Supply and fix 1.5 Sqmm three core PVC insulated, unsheathed multistranded copper conductor flexible cable 1100 volts grade complete all as specified and directed by Engr in Charge.

Out going :- a) MCCB 4 Pole, current rating 100 Amp, With Thermal Magnetic release , breaking capacity 25 kA at 415V, 50Hz - 02 Nos. b) MCCB 4 Pole, current rating 63 Amp, With Thermal Magnetic release , breaking capacity 25 kA at 415V, 50Hz - 01Nos. c) MCB SPN current rating 40 Amp, breaking capacity 10 kA at 230 V, 50Hz - 01 No d) MCB TPN current rating 32 Amp, breaking capacity 10 kA at 230 V, 50Hz - 04 No e) Angle iron base frame as reqd size as per above panel, total leg height 600 mm and grouting in side PCC 150 mm legs and made out of ISA 5050, 50 x 50 x 6 mm thick angle iron duly painted - 01 No. f) M & L for necessary excavation and as reqd PCC 1:3:6 (40 mm graded aggregate) Type C2 for foundation of angle iron legs frame work complete - 01 job

Out going :- a)MCCB 4 Pole, current rating 63 Amp, With Thermal Magnetic release, breaking capacity 25 kA at 415V, 50Hz - 01 Nos. b) MCB SPN current rating 40 Amp, breaking capacity 10 kA at 230 V, 50Hz - 01 No c) MCB SPN current rating 32 Amp, breaking capacity 10 kA at 230 V, 50Hz - 04 No d) Angle iron base frame as reqd size as per above panel, total leg height 600 mm and grouting in side PCC 150 mm legs and made out of ISA 5050, 50 x 50 x 6 mm thick angle iron duly painted - 01 No. e) M & L for necessary excavation and as reqd PCC 1:3:6 (40 mm graded aggregate) Type C2 for foundation of angle iron legs frame work complete - 01 job

Supply, laying and testing of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 11000 Volts grade with stranded aluminium conductor of size 50 sqmm 3.5 core complete all as specified and directed. Note:- Excavation / earth work will be measured and paid separately.

Supply, laying and testing of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 11000 Volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core complete all as specified and directed. Note:- Excavation / earth work will be measured and paid separately.

Supply and laying for burnt brick old size sub class 'B' laid in trenches a butting each other with a gap not exceeding 10 mm , vertically over the cable for cable protection complete all as specified and directed.

M&L for Laying in trenches in road cross / floors tube galvanished iron light grade 40 mm bore pipe with all fittings for protection of cable complete all as specified and directed.

Labour only for boring under road/drain by manual method for inserting the light grade pipe GI tubing up to 50 mm dia cable protection complete all as specified and directed by Engineer In Charge.

Supply and fix 4 Sqmm three core PVC insulated, unsheathed multistranded copper conductor flexible cable1100 volts grade complete all as specified and directed by Engr in Charge.

Supply and fixing rigid non-metallic PVC conduit heavy duty exclusive of boxes, but inclusive of all tees,bends,elbows,reducers and all fixing accessories of size 20 mm on wall/floor etc complete all as specified and directed.

Supply and Fix switch socket combined universal 2 in 1, 6 pin, 5Amps. complete all as specified and directed by Eng-In-Charge.

S & F in replacement GST I9102 Intelligent Smoke Detector with standard mounting base for Addressable fire alarm panel as per existing sample complete all as specified and directed.

S & F in replacement stranded plain annealed coper conductor cable 1.5 sqmm 2 core Cl.1, to BS EN 60288. for fire alarm , smock & heat multi detector as per existing sample complete all as specified and directed.

S & F in replacement GST 100 addressable fire panel, designed in accordance with EN54-2 standard, to build simple detection zones -8, each zone with independent fire LED, fault/disable LED zone label, Class A loop, maximum capacity of 128 addressable devices with emergegncy light backup Battery complete all as specified and directed.

S & F in replacement GST DI-9204E Digital Manual Call Point Certified by LPCB for EN54-11 as per existing sample complete all as specified and directed.

S & F in replacement GST I-9403 Intelligent Sounder audible and visual Strobe 24 Volt DC , Certified by LPCB for EN54-3 as per existing sample complete all as specified and directed.

Supply and fixing in replacement Hose box made of 18 gauge MS Sheet 800mm X 600mm X 250mm with double door with 4 mm thick glasses and door frame made of 16 gauge MS sheet painted fire red complete all as specified and directed.

Supply and fixing in replacement old u/s first -Aid hose reel drum swinging mounted type brackets comprising High pressure braided rubber hose pipe of ISI Marked/ IS-884, 20 mm dia, 30 meter length complete with coupling branch pipe and nozzle complete all as specified and directed.

Supply and fixing in replacement old u/s 63 mm dia, 15 mtr length reinforced rubber cotton synthetic fibre woven jacketted fire delivery hose as per IS-636-68 type "A" with instantaneous male and female coupling confirming to IS - 903 complete all as specified and directed.

Supply and fixing in replacement old u/s 63 mm dia stainless steel branch pipe with 15 mm nozzle conforming to IS 903 complete all as specfied and directed.

Supply and fixing in replacement transparent fiber sheet glass 4mm thick with incl fixing new rubber bedding in fire hose box complete all as specified and directed.

Supply and fix Gun metal fire brigade in let connection for connecting to external fire hydrant ring main consisting of Four nos 63mm dia instantaneous type male coupling with built in check valves and 150mm dia, flanged outlet complete with all accessories complete all as specified and directed.

S & F in replacement of old u/s sliding door lock chromium plated or as per existing sample including 40 mm padlock complete all as specified and as directed.

Supply and fixing in replacement old u/s Temperature Guage as per exisitng sample complete all as specified and directed.

Supply and fixing in replacement old u/s Pressure switch Universal type complete all as specified and directed.

S & F in replacement sheet metal enclosures double door type for using MCBs suitable for single pole and neutral, 4 way with having copper bus bars suitable for 200 amps rating complete all as specified and directed.

S & F in replacement sheet metal enclosures single door type 2 way for using MCBs suitable suitable for 200 amps rating complete all as specified and directed.

S&F MCB single pole with neutral, 6 to 32 Amps, 250 volts with ‘C’ curve, fixed in existing PVC box including connecting complete all as specified and directed.

S&F MCB single pole , 6 to 32 Amps, 250 volts with ‘C’ curve, fixed in existing PVC box including connecting complete all as specified and directed.

S & F in replacement bronze gate / ball valve with handle, screwed both ends suitable for 15mm dia iron pipe complete all as specified and directed.

S & F in replacement bronze gate / ball valve with handle, screwed both ends suitable for 40 mm dia iron pipe complete all as specified and directed.

M&L for replacement of old unserviceable motor starter of relay range 20-32 Amps , DOL type in sheet metal enclosure with amp and volt meter type AC-3 phase, 415V, 50 Hz suitable for 15 HP electric motor complete all as specified and directed.

S&F in replacement PVC insulated submersible flat cable ISI marked with multi stranded copper conductor 1100 volt grade of size 4.0 Sqmm 3 core complete all as per site requirement or as complete all as specified and directed.

S&F for replacement of broken flat collector solar panel of size broken flat collector plates solar panel of size 2025mm L x 1025mm W mtr or as per existing sample complete all as specified and directed.

S & F in replacement insulated side assistant tank 10/15 ltr capacity made of inner Cell S/S 2mm thick sheet incl metal float valve and inlet outlet connection socket as per existing sample for solar water heater complete all as specified and directed.

S& F in replacement of leakage 1000 ltr capacity solar water heat exchanger type S/S insulated tank with incl inner cell made of S/S 2.0 mm thick sheet with inlet , out let water connection pipe , temperture guage etc complete suitable to existing flat collector solar panel complete all as specified and directed.

M & L for Disconnecting the existing old solar flat collector panel of any description for de-scaling of water chocked flat collector solar panel copper fins / tubes with circulating concentrated de-scaling solution and suitable size of drill rod, wire brush etc. after removal of scale , reassembling the solar flat collector panel with including new rubber gasket nuts, bolts & washers, etc. required at site and testing complete all as specified and directed.

S & F in replacement of old u/s EPDM rubber hose pipe 32 mm dia with fixing clamp for solar water heater complete all as specified and directed.

S & F in replacement of PVC box of outside size 350mm x 250mm x 150mm fixed on angle iron leg including 01 No. timer switch, 01No of 15 Amps switch socket combination with PVC encloser box and 1 No MCB SPN, 16 Amps, 250 volts with 'C' curve, etc. fixed complete all as specified and directed.

S & F in replacement old broken GI pipe with 20 mm dia "medium grade" galvanised iron pipes fittings on walls/ceiling/ trench or laying in floors complete all as specified and directed.

S & F in replacement old broken GI pipe with 25 mm dia "medium grade" galvanised iron pipes fittings on walls/ceiling/ trench or laying in floors complete all as specified and directed.

S & F in replacement old corroded GI pipe with 25 mm dia "medium grade" galvanised iron pipes fittings on walls/ceiling/ floors with including glass wool and aluminium cladding complete all as specified and directed.

S & F in replacement old corroded GI pipe with 40 mm dia" medium grade" galvanised iron pipes with fittings on walls/ceiling/ floors with including glass wool and aluminium cladding complete all as specified and directed.

M & L for MS frame work for solar water heater including new fabrication work made of MS angle iron, MS sheet, rolled bar and flat iron, Square tube etc quality confirming to Fe-410-W or Gde-E 250 quality - A with fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, polishing , drilling holes for bolts, in any shape or size as indicated or directed by Engr -in- Charge and inclusive of one primer coat, one under coat and one finishing coat of paint etc. complete all as specified and directed.

TECH SERVE SOLUTIONS

DWARKADHISH ENTERPRISE

K K Construction Co

Nitesh Enterprise

Ramdev and Sons

Electricals India

Shree Builders

ARTI CONSTRUCTION

M/s Matadeen Ramchandra Agarwal