S.I.T.C of Air conditioning System

Amount

Supply & Delivery of Ceiling suspended ductable type split airconditioners having Microprocessor based control system and the following specification. Capacity-5.5 Tonnage (upto +1 TR acceptable) Rated Cooling Capacity -66000 BTU/Hr No. of IDU-1 No Air-flow/IDU-2200CFM No of ODU-1No. Compressor -1 No Scroll Compressor Refrigerent -R410A Condenser & Cooling Coil:Copper coil Power Supply :415v, 50Hz,3 Ph AC (with applicable tolarance) [ Make-Carrier/Voltas/Blue Star/Mitsubishi Electric/Hitachi/ DIAKIN]

Supply & Delivery of Ceiling suspended ductable type split airconditioners having Microprocessor based control system and the following specification. Capacity-8.5 Tonnage (upto +1 TR acceptable) Rated Cooling Capacity -102000 BTU/Hr No. of IDU-1 No Air-flow/IDU-3400CFM No of ODU-1No. Compressor -1 No Scroll Compressor Refrigerent -R410A Condenser & Cooling Coil:Copper coil Power Supply :415v, 50Hz,3 Ph AC (with applicable tolarance) [ Make-Carrier/Voltas/Blue Star/Mitsubishi Electric /Hitachi/ DIAKIN]

Supply & Delivery of Ceiling suspended ductable type split airconditioners having Microprocessor based control system and the following specification. Capacity-11 Tonnage (upto +1 TR acceptable) Rated Cooling Capacity -132000 BTU/Hr No. of IDU-1 No Air-flow/IDU-4400CFM No of ODU-1 or 2 Nos Compressor -2 No Scroll Compressor Refrigerent -R410A Condenser & Cooling Coil:Copper coil Power Supply :415v, 50Hz,3 Ph AC (with applicable tolarance) [ Make-Carrier/Voltas/Blue Star/Mitsubishi Electric/Hitachi/ DIAKIN]

Installation, Testing & Commissioning of the above Air Conditioners by making scaffolding arrangement as per site condition, supply of necessary refrigerent, connecting control & power cabling & other necessary materials to complete the job For 5.5/8.5/11.0 TR Ductable Units.

SITC including vaccumiazation and Nitrogen of testing of following nominal size of soft/hard drawn copper refrigerent piping forpackage/VRV/VRF/RAC system, complete with fittings, with adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XLPE class -O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for suction and liquid lines, all accessories as per specification etc. as required.

15.88 mm. dia (OD)(soft drawn) Cu. Pipes with tube thickness 1.2 mm incl. 19mm thick insulation.

12.7 mm. dia(OD)(soft drawn) Cu. Pipes with tube thickness 1.2 mm incl. 19 mm thick insulation

22.2 mm dia(OD)(Hard drawn) Cu. Pipes with tube thickness 12mm incl. 19mm thick insulation.

28.8 mm dia(OD)(Hard drawn) Cu. Pipes with tube thickness 12mm incl. 19mm thick insulation.

Supply and fixing of 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper Cable of the following size (Brand approved by EIC) incl. necy. fittings as required.

3 core x 1.5 mm² Round PVC insulated cable (Make-Polycab/Haavells/Gloster/Finolex /RR Kable/KEI).

3 core x 2.5 mm² Round PVC insulated cable(Make- Polycab/Haavells/Gloster/ Finplex /RR Kable/KEI).

Supply & fixing of dia UPVC drain pipes with all necessary hanging arrangements. 25mm Dia.

Supply, Installation, balancing and commissioning of fabricated at site GSS sheet metal (Make-Tata steel/Sail/Jindal) rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, venes, hangers, support etc as per approved drawings and specification of following sheet complete as required .

For 24 SWG

For 22 SWG

Duct tharmal insulation by supplying and fixing of following thickness dully laminated aluminium foil of mat finish closed cell Nitrile rubber (Class 'O' ) insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50mm wide and 3mm thick self adhesive nitrile rubber tape insulation complete as specification and as reqired.

Supply & Fixing of Powder Coated extruded aluminium Supply Air Grills with aluminium volume controll dampers complete as per specification.

Supply & Fixing of Powder Coated extruded aluminium Return Air Grills with louvers but without volume controll dampers complete as per specification.

Supply & Fixing of Manually operative Damper,Galvanized Steel Sheet with 125 GSM Zink Coated, Certified by CPRI.

Supplying, fabrication & fixing 03 Nos. M.S. Angle/M.S C chanel of size (75 mm x 75 mmx6mm) for placing the outdoor unit of ductable split AC incl. drilling 05 nos holes in each Angle including cutting holes into the wall & grouting the same (1:1 ½ :3) etc fabricated with 4 Nos.Baricated the same for maintenance horizontal angle of 50 mm x 50 mm x 6 mm Inscl Platform as per direction of E.I.C.. Area of Platform 9mtr x 1.8 mtr for Air Conditioning Units.

Supply and Installation of split type AC machines having capacity Cooling Capacity range (6.6 kw - 7.0 kw), with fixed speed rotary compressor, refrigerant gas R32/R410 BEE star rating -3 (EER range 3.5 to 3.99), Air flow range CFM (780-850), both condenser and cooling coils made of copper tube connecting chord with plug top confirming to ISI 391 (Part-I & Part-II) aith all amendments (Make-Mitsubishi Electric/Daikin/O General/Carrier/ Voltas/Blue Star)

Supply and Installation of split type AC machines having capacity Cooling Capacity range (3.35 kw - 3.6kw), with fixed speed rotary compressor, refrigerant gas R32/R410 BEE star rating -3 (EER range 3.5 to 3.99), Air flow range CFM (340-400), both condenser and cooling coils made of copper tube connecting chord with plug top confirming to ISI 391 (Part-I & Part-II) aith all amendments (Make-Mitsubishi Electric/Daikin/O-General/Carrier/ Voltas/Blue Star)

S/F of 3 core round copper cable of 2.5 sq.mm, 5/8" &1/4" copper pipe nitrile rubber insulation tube, water drainage pipe, Insulation tape, fastner, etc as per direction of EIC.

Febrication of iron Bracket/ platform which consist of three nos. 75*40*5 mm 'C' channel aprox length 1.2mtr. as main support, three no. angle support from wall to structure with 50*50*6 mm iron angle, 25*25*5mm iron angle for safty guarding fram, 25*6mm iron flat for making 400mm wide platform for future maintenance work, it should have the facility to install one outdoor unit of split AC machine at middle of the bracket and sufficent space should be maintained both side of the outdoor unit for maintenance work also have suitable angle support between wall & bracket and painting the same as per direction of EIC.

Terms and condition

The Agency must procure the materials from the Manufacturer / OEM or from their authorised sales channel so that the standard warranty / support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them.

Documents that authenticates such procurement from the Manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent upon award of the contract from the e-mail of the Manufacturer / OEM / authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution, of work/submission of bill.

If any refurbished material is supplied and installed, penal action will be taken as per existing rules.

REFRICON

Lyric International