Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹39.7 LAccepted-AOC | L-1 | Accepted-AOC Contractor is L-I in this bid | |
| 2 | L-2₹46.5 L+₹6.7 L (16.8%)Rejected-Finance | L-2 | Rejected-Finance Contractor is L-2 in this bid | |
| 3 | L-3₹51.7 L+₹12.0 L (30.1%)Rejected-Finance H NO 29 1 3 PALACE COLONY MANDI DISTT MANDI H P | MANDI | HIMACHAL PRADESH | 175001 | L-3 | Rejected-Finance Contractor is L-3 in this bid |
Tender Value
₹46.2 L
EMD Value
₹76,818
Closing Date
18 Jul 2022, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EE JSV Karsog
EE JSV Karsog
PLWSS Thali to Satlog and its adjoining villages in GP Thali and Shakra Tehsil Karsog
2022_HPIPH_62594_1
KSG-MDI10-764
Open Tender
Civil Works
Item Rate
180 days
Tattapani Tehsil Karsog
Please refer Tender documents.
7 documents required · 7 mandatory
₹800
Yes
₹76,818
Yes
10 Feb 2023
9 Jul 2022
19 Jul 2022
9 Jul 2022
18 Jul 2022
9 Jul 2022
Amount
Excavation in foundations trenches etc. in all kind of soil in all leads and lifts such as pick work, jumper work in saturated /un saturated soil blasting work and chiseling /wedging out of rocks where blasting work is prohibited up all depth and lifts including pumping and baling out water where ever requared stacking the excavated earth not more than 3mtrs.clear from the edge of excavation and then returning the stacked soil in 15cm.layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and disposing of all surplus excavated material within all leads and lifts, useful materials available from excavation to be properly stacked and handed over free of cost to the department as per direction of the Engineer-in-Charge
Providing and laying cement concrete 1:3:6(1cement:3sand:6graded stone aggregate of 40mm nominal size)and curing complete excluding cost of form work including all leads and lifts:
Foundation and Plinth.
Providing and laying cement concrete in M30 grade but not leaner than 1:1:2 (1 cement:1 sand:2 graded stone aggregate of 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:
Foundation and Plinth.
Walls (any thickness) but not less than 0.10 mtrs thick including attached pilasters buttresses plinth and string course from top of foundation upto floor two levels.
Providing and laying cement concrete 1:1 ½ :3(1cement:1 ½ sand:3graded stone aggregate of 20mm nominal size)and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:
i) Beams,cantilivers,girders and lintels sides and soffits of beams,beam haunchings, cantilivers , Pillar, Pedestal bressummers and Inlets not exceeding 1 metre in depth.
Foundation and Plinth.
iii) Walls ( any thickness) portions and the like including attached pilaster, butresses plinth and string course and the like.
iv)Suspended floors, roofs, landings, shelves and their supports balconies, beams, girders, bressumers and cantilivers etc in in all leads an lifts of any shape.
Placing & Laying mild /tor steel reinforcement for RCC. work including bending, binding and placing in position complete up to floor two level including all leads and lifts.:
Providing & Laying cement concrete 1:2:4 (1 cement:2 sand:4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement in:
a) Foundation, footings & bases of columns and the like mass concrete with in all leads and lifts complete in all respect.
b) Suspended floors,roofs, landings, shelves and their supports balconies, beams and girders, bressummers and cantilivers etc in all leads and lifts of any shape.
Providing form work with steel plate 3.15 mm thick welded with angle iron 30x30x5 mm so as to give a failr finish including centering, shuttering propping etc. height of propping and centering below supporting floor to ceiling upto all heights and removal of the same for in-situ reinforced conc. and plain conc work in:-
(a) Foundation, footings,basis of columns & the like and mas concrete in all leads and lifts.
(b) Beam,Cantiliver, girders and lintels sides and soffits of beam, beam haunchings cantilivers, girders, bressummers and lintels not exceeding 1 mtrs in depth in all leads and lifts.
(c) Vertical surfaces such as walls (any thickness) portions and the like including attached pilaster buttresses, plinth and string course an the like.
(d) Flat surfaces such as soffits of suspended floors,roofs,landings and the like floors etc upto floors etc upto 200 mm in thickness.
Providing form work of ordinary timber plankings so as to give a rough finish i/c centering, shuttering propping etc height of propping an centering below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for in-situ reinforced concrete work in :-
(a) Arches, domes, baults up to all span in all leads and lifts.
Laying, jointing and tesnting in trenches, GMS tubes (MG) tube fittings(earth work to be paid separately).
i) Inlets pipe 50 mm dia
ii) Outlets pipe 50 mm dia
iii) Scour pipe 65 mm dia
iv) Inlet pipe 100 mm
v) Out let pipe 100 mm
vi) Scour pipe 100 mm dia
Providing and fixing cast iron sluice valve as per IS 14846 of nominal pressure an designation PN-1 with cap: Leader Make with flane table-5.
i) Supply valve 50 mm dia
ii) Scour Valve 65 mm dia
iii) Supply Valve 100 mm dia
iv) Scour valve 100 mm dia
Steel work welded in built up section trusses and frammed work i/c cutting hoisting fixing in position and applying a priming coat of red lead paint in grafting frammed guard bar ladder railing brackets and similar works in all leads and lifts.
Providing and fixing wire gauge ventilator in all leads and lifts.
Manufacturing, Supplying, Fabrication and Fixing of MS Fabricated Protection Panel 750 mm x750mm made with MS Angle 40 x40x4mm for frame, MS flat 30x30x3mm for cover MS flat 25 x 5mm for fixing of sliding door bolt and MS sheet 12 gauge, 2.5 mm thick for protection of manhole cover of storage tanks including the cost of cutting and welding of MS angle and in RCC Slab by drilling hole in MS angle & in RCC Slab, Provision for providing and fixing slidinig door bolts 300x60 mm MS hadle 100 mm, lock and applying cost of red lead paint and painting two coats with steel paint firoza blue complete job in all respect in leads and lifts and to the entire satisfection of the Engineer-in-Charge.
Providing and fixing precast concrete manhole cover & frame confirming to IS 12593-1988 part-I and IS 12592-1991,part-II 560 mmdia medium duty.
Providing and fixing precast concrete manhole cover & frame confirming to IS 12593-1988 part-I and IS 12592-1991,part-II 500 mmdia medium duty.
Brick work using common burnt clay building bricks in foundation and plinth in cement mortor 1:6 (1 cement:6 sand).
15 mm cement plaster in single coat on the rough side of Brick/stone/concrete wal for interior plastering up to floor two level i/c arrises, internal rounded angles, chamfers and /or rounded angles not exceeding 80 mm in girth and finished even and smooth in CM 1:6 (1 cement:6 sand)
Random Rubble masonry /polygonal rubble masonary (un coursed /brought to courses ) with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12(1cement: 6sand: 12graded stone agg.20mm nominal size) in plinth level in cement mortor 1:6 (1cement:6 sand)
Providing and laying cement concrete 1:6:12 ( 1 cement:6 sand: 12 graded stone aggregate of 40 mm nominal size) and curing complete excluding cost of form work including all leads and lifts a) Foundation and plinth
Providing and fixing manually operated chain pully of cap 5 tonne i/c gantary girders as per latest specifications complete in all respect.
Laying, jointing and testing in trenches, GMS tubes (LG) tube fittings (earth work to be paid separately) 50 mm dia
Providing and fixing Gun metal wheel valve with wheel 50 mm nominal bore
Providing and placing in horizental layers filtering media duty graded, screened cleaned and washed a per specified in all respect as per direction & to the entire satisfection of Engineer-in-charge. Upto all leads and lifts.
a) Top layer: Fine sand ( Eff. Size 0.20 mm to 0.40 mm & unifomity coefficient 2.00 to 3.00)
b) 2nd layer: Course sand 3 mm to 6 mm.
c) Third layer: Bazri 6 mm to 20 mm.
d) Fourth layer: Bazri 20 mm to 25 mm.
e) Bottom layer: Broken stone 50 mm to 75 mm.
Providing and placing 2nd class standrad bricks in filter bed in two layers so as to make cross drains as per direction of Engineer-in-charge.
Providing and fixing panelled glazed or panelled an glazed shutters for doors , windows & clearstory windows i/c black enamelled iron butt hinges with necessary screws: 40 mm thick 2nd class deodar wood with in all leads and lift.
Half brick masonry in common burnt clay building bricks in: cement mortor 1:4 ( 1 cement:4 sand). 2nd class
Pointing on Brick work with cement mortor 1;3 (1 cement:3 sand) raised and cut with in all lead and lift.
Providing and laying brick tiles over mumfy roofs grouted with cement mortor 1:3 ( 1 cement:3 sand) over a 12 mm layer of CM 1:3 ( 1 cement:3 sand) and finished neat with in all leads and lifts complete in all respect.
6 mm cement plaster to ceiling in CM 1:3 (1 cement:3 sand).
20 mm thick cement plaster in single coat on rough side of brick/stone/concrete walls for interior plastering up to floor 2 level including arrises, internal rounded angles. Chmafers and or rounded angles not exceeding 80 mm in grith and finished even and smooth with in all leads and lifts in C:M (1 cement: 6 sand).
Providing & Fixing M.S. grills of required pattern in wooden frame of window etc.with M.S. flats, square or round barswith round headedbolts and nuts by screws plain grills.
Providing and Fixing wire gauge shutters using galvenised M.S. wire gauge of I.S. gauge designation 8 S. G. with wire of dia 0.56 mm for doors, windows i/c bright finished black iron enamelled burtt hinges with necessary screws 30 mm thick (2st class deodar wood) with in all leads and lifts complete in all respect.
Boulder filling behind the retaining wall floor with in all leads and lifts complete in all respect.
Providing plinth protection 50 mm thick in cement concrete 1:3:6 ( 1 cement:3 sand:6 graded stone aggregate 20 mm nominal size) with in all leads and lifts complete in all respect.
Constructing coursed rubble hammer dressed U shaped open surface drain with side wall 15x22 cm in cement mototr (1;6) (1 cement: 6 sand) and inside plastering with cement mortor 1:3 (1 cement : 3 sand) i/c earth work and laying 10 cms cement concrete in 1:5:10 ( 1 cement : 5 sand 10 graded stone 40 mm nominal size) and 7.5 cms cement concrete 1:2:4 (1 cement : 2 sand 4 graded stone 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design with in all leads and and lifts complete in all respect.
White washing with lime on undecorated wall surfae two coat to give even shade i/c throughly brooming the surfae to remove all dirt,dust and other foreign matters.
Distempering with dry distemper of approved brand and manufacture (two coats) and of required shade on undecorated wall surfaces to give an even shade sand papered smooth.
Finishing wall with water proofing cement paint of approved brand and manufacturing (two coats) brushing to give an even shade i/c cleaning of oil dirt, dust and other foreign matters, and papering and knotting etc. with in all leads and lifts complete in all respect.
Providing and fixing anodised MS sliding door bolts with bolts and nuts screw etc complete.
Providing and fixing anodised MS tower bolts ( barrel type) with screws etc. complete.
Providing ad fixing anodised MS handles with necessary screws etc. complete.
Applying priming coat on new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil,greese,dirt and other foreign matters,sand papering and knotting.Ready mixed paint brushing wood primer pink.
Painting two coats (excluding priming coat) on new wood and wood based surfaces,with enamel paint to give an even shade including cleaning the surface of dirt ,dust and other foreign matters sand papering and stopping with enamel paint other than white.
Precast terrazzo tiles hydrauliuc compressed 20 mm thick with marble chips of specified size in flooring cement mortar 1:6 (1 cement :6 sand ) joined with neat cement slurry (Dark shade).
Providing and fixing pressed steel doors frames manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges, jump lock jamb,beed and if required angle threshold of mild steel angle of section 50x25 mm or base tiles of 1.25 mm pressed mild steel welded or regidly fixed together by mechanical means, adjustabel lugs with spilt and tails to each jamb including steel but things 2.5 mm thick with gaurds, lock strike plate and shock as specified and applying a coat of apprved steel primer after pretreatmetn of the surface as directed by Engineer-in-chage.
Wiring for light point/fan point/exhaust fan/ call bell point with 1.5 Sqmm PVC insulated heat resistant flame retardant (HRFR) and low smok singal core (Flexible) copper condector cable in PVC casing and caping and earthing the light point with 1.5mm HPFRLS/ PVC insulated single core coper conductor cable as required.
Wiring for circuit/sub-man with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.
2x1.50 Sq mm
2x4.oo Sq mm
Supplying and fixing 3 pin 5/6 amps socket outlet on the exists switch box/covers including connections etc as required.
Supplying and fixing 2 way 5/6 amps. Tumbler/piano type switch on the existing switch box on the switch box/cover including connections etc. as required.
Supplying and fixing of 3 pin15/66 amps Socket outlet on the exists switch box on the switch box/cover including connections etc as required.
Supplying and fixing 2 way 15/16 amps. Tumbler/piano type switch on the existing switch box on the switch box/cover including connections etc. as required.
Supplying and fixing wooden boxes of following size (nominal size) on surface or in recess suitable for fixing phenollic laminated sheet cover in front including painting etc. as required:-
229mm x 102mm x 60mm deep.
203mm x 152mm x 60mm deep.
Supplying and fixing ceilling fan rose on existing juction box wooden block ic connection etc as required.
Supplying and fixing plain pandent with 16/20 mm twin twiste, flexible PVC insulated copper cable and backlite pendent holder i/c connection etc as required.
Supplying and fixing of 5 amps to 32 amps rating 240 volts L series miniature circuit breaker of following poles in the exsiting MCB DB complete with connection testing and commissioning etc as required Cat A (single pole).
Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus-bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate cable, identification labels inter connection, phosphatized and powder painted, including earthing etc. as required busbar 8 way.
Supplying and fixing following rating double pole 240 volts ioslater in the existing MCB DB complete with connection testing and commissioning etc. as required (63 amp CAT-A).
Providing, installation, testing and commissioning fo celling fan with regulator, icluding wiring the down rods of standard length (up to 30 cm) with 1.5 sqmm PVC insulated copper conductor single core cable etc as required ceilling fan 1400mm sweep category A
Providing and fixing ultra slim decorative extruded box fixture with domestic electronic ballast, snap-on installers, suitable for 28 watt FTL (T5), complete with all accessories (including one No. T-5 Tube), connections, testing and commissioning etc. as required 1x28 watt-FTL (T5) (Category-A)
Providing and fixing LED Flood light watt mentioned blow (OREVA) complete in all respect in all leads and lifts.
Providing and fixing two core service wire 6 Sqmm thick.
Dharam Pal
V S CONTRACTORS AND ENGINEERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .