CSIND - Chain Link fencing for the protection of Kollam Thodu from Kochuplamoodu Bridge to Pallithottam Bridge in between chainage 71.330Km - 72.250Km

Amount

detailed estimate

2.31 : Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared etc complete as per the direction of departmental engineer in charge

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil etc complete as per the direction of departmental engineer in charge

4.1.5 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) etc complete as per the direction of departmental engineer in charge

16.19 : Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc complete as per the direction of departmental engineer in charge

16.70.2 : Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts , bolts and washers as required complete as per the direction of Engineer-in- charge.Made of G.I wire of dia 4 mm. PVC coated to achieve outer dia. not less than 5 mm in required colour and shade etc complete as per the direction of departmental engineer in charge

10.20 : Providing and fixing bolts including nuts and washers etc complete as per the direction of departmental engineer in charge

13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, .On steel work etc complete as per the direction of departmental engineer in charge

od64290/2019_2020/IA : Information Board. SS Pipe name board supplying and fixing information board 100x60mm size. Using SS pipe as post and 16 gauge thick sheet surrounded by MS angles including fabrication, a priming coat with metal primer and fixing with concrete etc. complete as per direction of the departmental officers at site.

13.71 : Lettering with black Japan pint of approved brand and manufacture etc complete as per the direction of departmental engineer in charge

SABU K.S.

K J JOSE

Bidder Name

K J JOSE

SABU K.S.