Repairs to VCB across Moozhikkalthodu in Moonniyur Panchayath in Malappuram District

Amount

RING BUND

60.1.1 : RING BUND Type-I-Putting up ring bund as per approved shape 2.5m bottom width, 1m top width using empty gunny/polythene bags filled with earth placed in 2 rows at 0.6m apart and filled in between with puddle clay to form bund for an average height 2.00m including labour dismantling the bund after completion of the work etc. complete.

DISMANTLING existing mechanical structures.

od34680/2021_2022/MH : Dismantling of the Canal Shutter ( upto 2 Tonne weight ) /Hoisting unit / Embedded parts etc. of the same and stacking ot a distance of 100 metre including hire of machinery, labour etc complete as directed by the deptl. officer at the site (Weight of thr unservicable shutters and embedded parts may be calculated as 60% and unservicable hoisting units as 80%)-(CANAL GATE 4-16)

DEMOLISHING & CONCRETING

15.2.1 : Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

SUPPLY of embedded parts, MS shutters, hoisting bridge and handrails.

od43664/2021_2022/MH : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

od43665/2021_2022/MH : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

od43666/2021_2022/MH : Supply of MS checquered plates including cost of conveyance charges

od43667/2021_2022/MH : Supply of MS round bar including cost of conveyance charges

od34691/2021_2022/MH : supply of bolt and nut upto 300 mm length including cost of conveyance

od34770/2021_2022/MH : SUPPLYING & STACKING of Dia 32 mm G.I. PIPE

od35521/2021_2022/MH : SUPPLYING & STACKING of Dia 50 mm G.I. PIPE

FABRICATION and ERECTION of SS and MS embedded parts

od34685/2021_2022/MH : Fabrication, Supply, erection and assembling in correct position and alignment by welding SS Embedded parts in 304L Grade like roller track, seal track,Seal seat etc as per approved specifications, drawings and directions of deptl officer at site including cost of all materials,labour,machinery for plaining, welding,shearing, grinding etc,lead and lift, conveyance, incidental and handling etc complete-(CANL GATE 5-16)

od34686/2021_2022/MH : Fabrication and erection of Embedded parts of Canal shutters ( upto 2 tonne weight ) and accessories as per approved specifications, drawings and directions of deptl. officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied-(CANAL GATE 1-16)

SUPPLY of SCREW ROD and WORM & PINION

od34687/2021_2022/MH : THREAD LESS portion of the screw rod (per metre rate)

od34688/2021_2022/MH : Providing EN-8 screw rod 7.50 tonne capacity 4.00 m lift screw hoist having one number of EN-8 screw shaft having a lifting speed of around 5.00 cm/min for 24 rpm of hand operation including cost of all materials, labour, hire charges and conveyance-(CANAL GATE 14-16)

od34689/2021_2022/MH : Providing of double worm and pinion having a lifting speed of around 5.00 cm/min for hand operation/manual operation including cost of all materials, labour, hire charges and conveyance-(CANAL GATE 16-16)

od34771/2021_2022/MH : SUPPLYING and APPLYING GREASE on NEW SCREW ROD for CANAL GATE

PROVIDING rubber seal

85.116 : Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

85.118 : Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

FABRICATION, PAINTING and ERECTION of MS shutters, hoisting bridge and handrails.

od34692/2021_2022/MH : Fabrication and supply of Structural steel canal shutters ( upto 2 tonne weight )/ hoisting bridge /platform and accessories etc. for the same as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied-(CANAL GATE 2-16)

85.114 : Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

od34693/2021_2022/MH : Painting all the exposed surfaces of the Hoisting bridge and its hand rails etc with two coats of EPOXY WHITE PAINT over two coats of epoxy primer after cleaning the surface using handand power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials,all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

od34694/2021_2022/MH : Erection of the canal shutter ( upto 2 tonne weight) /hoisting bridge / platform including handrails , ladder etc. for the same including alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied-(CANAL GATE 3-16)

PAINTING the pier with two coats of ACRYLIC EMULSION PAINT over one coat of WATER THINNABLE CEMENT PRIMER

13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

P.Damodaran, G.R.Industries

JOBIN JOSEPH

Bidder Name

Ashique Fabricators

P.Damodaran, G.R.Industries

JOBIN JOSEPH