Upgradation of RRFs - Fire Protection Work in Manacaud (Ward 72)- Fire fighting system - General Fire fighting Work

OD384653/2025-2026 - MR Supply, installation, testing and commissioning of Diesel Engine Driven Fire Pump of approved make suitable for automatic/manual operations end suction type fire pump with CI impeller with CI body should be of graded F.G. 200 to IS: 210 casing shall be designed for 1.5 time of working pressure, capable of delivering of 1620 LPM against a total head of 80 MWC while running at suitable RPM with 25 HP to ensure a minimum pressure of 3.5 Kg per sq cm at the furthest outlet, complete with common base plate, coupling, coupling guard and other accessories. (RCC foundation & cabling shall be provided by others)

OD384658/2025-2026 - MR Supply, installation, testing and commissioning of Diesel Engine starter panel with the following arrangements: auto start panel for the diesel Engine (24V) complete auto/manual switch, indication lamps protective MCBs with battery charger, suitable for working on 230V AC single phase enclosure being vermin & dust proof, battery charger DC ammeter, DC Volt meter, One set of indicating lamps for the following: Mains indication, DC supply on, Engine fails to start, Engine running, Low oil pressure, High water temperature etc. One set of push button stations for the following shall be provided: Engine start, Engine stop, Hooter ACK, Fault reset, Auxiliary relays contactors/timer for sequence operating for starting and stopping the Engine - 1 set, Hooter for audio alarm (Industrial Type 1 no) for identifying the engine running condition. Also panel shall have 1 no contacts for extending the status running, manual mode, LLOP, HWT, Engine fails to start (annunciation) of fire pumps to the fire alarm panel

OD384659/2025-2026 - MR SITC of MS pipe Class 'B' medium grade with ISI mark complete with all necessary fittings such as nuts & bolts, bends, flanges, tees etc. Piping shall have one coat of anticorrosive Primer coat over which two coat of signal red paint

OD384647/2025-2026 - MR SITC of Underground piping MS pipe Class 'B' medium ISI mark complete with all necessary fittings such as nuts & bolts, bends, flanges, tees etc. and Piping shall have anticorrosive wrapping and coating treatment. (The cost of excavation & backfilling if necessary will be client scope) (Underground piping) Make JINDAL

OD384648/2025-2026 - MR SITC of ball Valve cast iron body as per IS 5312 With ISI Mark (25 mm dia)

OD384649/2025-2026 - Make - KARTAR/MIT , Air release valve MR SITC of Air release valve gun metal body 25 mm Make - KARTAR/NEW AGE Pressure Switch

OD384642/2025-2026 - MR SITC of pressure switch having 1/4" BSP (F) connection IP: 32 enclosure protection, pressure range 0 to 200 psi with necessary contact,Make - INDFOSS/DANFOSS

OD384645/2025-2026 - MR SITC of pressure gauge, 4" dial, 0-100 psi range 3/8" BSP weather proof with stainless steel internals, siphon tube including fittings etc.Make - H-GURU,Piping & Related Accessories

OD384654/2025-2026 - Hydrant Valve,SITC Hydrant Valve-Single Headed SS-inlet as per IS 5290, ISI marked oblique pattern Hydrant Landing valve with 80 mm dia flanged and 63 mm dia instantaneous type female outlet with PVC blank cap & chain,Make - SAFE PRO ISI / REDEX ISI / M-TECH ISI

OD384652/2025-2026 - Fire Hose,90.16.2 SITC of fire fighting hose, fire hose-63 mm (2 1/2") dia, 30 mts length bearing IS: 636 type A with ISI marked duly bounded with aluminium couplings, 63mm size, pair of male & female parts instantaneous type, heavy duty bearings IS: 903 with ISI mark.Make - SAFE PRO ISI / REDEX ISI / M-TECH ISI