REPAIR/REWIRING AND REPLACEMENT OF INTERNAL FITTING AND FIXTURE AND OTHER CONNECTED ITEM IN MD AND OTM ACCN AT TBRL RANGE RAMGARH

Amount

Taking down carefully copper /aluminium point wiring (Light, fan, socket, or power) complete including fittings and fixture such as switches, ceiling roses pendents, regulators sockets / DBs / main switches include boards etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately), removing material, from site and making good the disturbed surfaces of walls, floor complete all as specified and directed.

Taking down the existing unserviceable main switches/DBs any type including boards from its position and making the good of disturbed surface complete all as directed.

Taking down carefully by sub main wiring/service connection of any type complete all as specified and directed.

Point wiring with 1.5 Sqmm (nominal area) PVC (FRLS) insulated sheathed copper stranded conductor cable run in and including concealed in wall/floor PVC conduit not less than 20 mm as per IS with all fittings such as bends, tee,junction boxes of suitable size including 1.5 Sqmm PVC(FRLS) insulated copper earth continuity conductor connected to common earth dolly and including MS/GI sunken boxes with modular inner & surface plate suitable for housing modular switches, sockets,fan regulators etc including all necessary wall cutting chases and making good disturbed surfaces in cement mortar 1:3 and as per existing colour of white wash / paint / OBD / cement base paint complete all as specified and directed. Note :- GI steel box and modular cover frame with plate shall deemed to be included in quoted rate against this item. For one light point controlled by one switch complete.

All as per serial item No 4.00 above but for one fan point controlled by one switch complete all as specified and directed.

All as per serial item No 4.00 above but for bell point controlled by one bell push complete all as specified and directed.

All as per serial item No 4.00 above but for one light point controlled by two way switchs complete all as specified and directed.

All as per serial item No 4.00 above but for 3 pin 5 Amp socket outlet on the same board with other switch, sockets complete all as specified and directed.

All as per serial item No 4.00 above but for 3 pin 5 Amp socket outlet independent complete all as specified and directed.

All as per serial item No 4.00 above but for 3 pin 15 Amp socket outlet independent with 2.5 Sqmm copper conductor complete.

All as per serial item No 4.00 above but for one 20 Amp, plug and socket point and wiring with 4.0 Sqmm PVC insulted, stranded, unsheathed copper conductor cable & 2.50 Sqmm unsheathed PVC insulated earth wire on Independent board for Geyser/AC complete all as specified and directed.

Material and labour for point wiring in existing concealed conduit with PVC insulated, unsheathed, single core two run multistandard copper conductor cable (FRLS) of size 1.5 Sqmm, 1100 volts grade including 1.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through in existing PVC conduit medium grade and including MS/GI sunken boxes with modular inner & surface plate suitable for housing modular switches, sockets,fan regulators etc including all necessary wall cutting chases and making good disturbed surfaces in cement mortar 1:3 and as per existing colour of white wash / paint / OBD / cement base paint complete all as specified and directed. Note :- GI steel box and modular cover frame with plate shall deemed to be included in quoted rate against this item. For light point controlled by one switch complete.

All as per serial item No 5.00 above but for fan point controlled by one switch complete all as specified and directed.

All as per serial item No 5.00 above but for bell point controlled by one bell push complete all as specified and directed.

All as per serial item No 5.00 above but for one light point controlled by two way switch complete.

All as per serial item No 5.00 above but for 5 or 3 pin 5 Amp socket outlet on the same board with other switch, sockets complete all as specified and directed.

All as per serial item No 5.00 above but for 3 pin 5 Amp socket outlet independent complete all as specified and directed.

All as per serial item No 5.00 above but for 3 pin 15 Amp socket outlet multipurpose independent using 2.5 Sqmm FR Copper conductor with 1.5 sqmm multistranded FRLS copper conductor as earth Wire complete all as specified and directed.

All as per serial item No 5.00 above but for one 20 Amp, plug and socket point and wiring with 4.0 Sqmm PVC insulted, stranded, unsheathed copper conductor cable & 2.50 Sqmm unsheathed PVC insulated earth wire on Independent board for Geyser/AC complete all as specified and directed.

Material and labour for point wiring in PVC casing caping medium grade ISI marked with its acessories and fixing with PVC insulated, unsheathed, single core two run multistandard copper conductor cable( FRLS) of size 1.5 Sqmm, 1100 volts grade including 1.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through in and including MS/GI sunken boxes with modular inner & surface plate suitable for housing modular switches, sockets,fan regulators etc including all necessary wall cutting chases and making good disturbed surfaces in cement mortar 1:3 and as per existing colour of white wash / paint / OBD / cement base paint complete all as specified and directed. Note :- GI steel box and modular cover frame with plate shall deemed to be included in quoted rate against this item. For light/Fan/Bell point controlled by one switch complete.

All as per serial item No 6.00 above but for light point controlled by Two way switch complete.

All as per serial item No 6.00 above but for 3 pin 5 Amp socket outlet on the same board with other switch, sockets.

All as per serial item No 6.00 above but for 3 pin 5 Amp socket outlet independent complete.

All as per serial item No 6.00 above but for 3 pin 15 Amp socket outlet independent with 2.5 Sqmm copper conductor complete.

All as per serial item No 6.00 above but for for one 20 Amp, plug and socket point and wiring with 4.0 Sqmm PVC insulted, stranded, unsheathed copper conductor cable & 2.50 Sqmm unsheathed PVC insulated earth wire on Independent board for Geyser/AC complete all as specified and directed.

Supply and fixing for Modular switch one way 6 Amp,1 Module complete all as specified and directed.

Supplying and fixing Modular socket, 6 amps-2/3 pin combined, 2 Module complete all as specified and directed.

Supplying and fixing Modular switch , one way, 16 amps, one Module complete all as specified and directed.

Supplying and fixing Modular socket 16 amps-6 pin multipin, 2 Module complete all as specified and directed.

Supply and fix Modular switch 2 way 6 Amp,1 Module complete all as specified and directed.

Supply and fix Modular bell push 6 Amp,1 Module complete all as specified and directed.

Supply and fix Modular Fan regulator electronic step type 230 V 2 Module complete all as specified and directed.

Supply and fix in repairs Ceiling rose surface type, PVC/Polycarbonate islated body size 50x28 mm two to three terminals.

Supply and fixing call bell, 6 Amps, 230 Volts, SP complete all as specified.

Supply and fix PVC condute/casing caping as required 40mm including of all tee, bend, elbow etc with fixing accessories complete all as specified and directed.

Supplying and fixing in repairs Modular white cover plate with frame, 1 Module complete all as specified and directed.

Supplying and fixing in repairs Modular white cover plate with frame, 2 Module complete all as specified and directed.

Supplying and fixing in repairs Modular white cover plate with frame, 3 Module complete all as specified and directed.

Supplying and fixing in repairs Modular white cover plate with frame, 4 Module complete all as specified and directed.

Supplying and fixing in repairs Modular white cover plate with frame, 6 Module complete all as specified and directed.

Supplying and fixing in repairs Modular white cover plate with frame, 8 Module complete all as specified and directed.

Supplying and fixing in repairs Modular white cover plate with frame, 12 Module complete all as specified and directed.

Supplying and fixing in repairs Modular white cover plate with frame, 16/18 Module complete all as specified and directed.

Supply and fix metal fiush mounting box 1/2 module of complete all as specified and directed.

Supply and fix metal fiush mounting box 3 module of complete all as specified and directed.

Supply and fix metal fiush mounting box 4 module of complete all as specified and directed.

Supply and fix metal fiush mounting box 6 module of complete all as specified and directed.

Supply and fix metal fiush mounting box 8 module of complete all as specified and directed.

Supply and fix metal fiush mounting box 12 module of complete all as specified and directed.

Supply and fix metal fiush mounting box 16/18 module of complete all as specified and directed.

Material and labour for wiring for circuit/ sub main wiring alongwith earth wire with the following sizes of PVC (FRLS) insulated copper conductor, single core, 1100 v grade cable in Concealed/surface as required using sizes of 2x1.5 Sqmm+1x1.5 Sqmm earth wire cables inciuding in PVC conduit/casing caping complete all as specified and directed.

All as per serial item No 32.00 above but 2x2.5 Sqmm+1x2.5 Sqmm earth wire.

All as per serial item No 32.00 above but 2x4.0 Sqmm+1x4 Sqmm earth wire.

All as per serial item No 32.00 above but 2x6.0 Sqmm+1x6 Sqmm earth wire.

All as per serial item No 32.00 above but 2x10.0 Sqmm+1x6 Sqmm earth wire.

All as per serial item No 32.00 above but 4x10 sqmm+1x6 Sqmm earth wire.

All as per serial item No 32.00 above but 4x16 sqmm+1x16 Sqmm earth wire.

Supply and fixing for lamp holder insulated body with back plate for batten fitting complete all as specified.

Supply and fix for LED lamp 14 watt with E-22/E-27 base complete replaced in flame proof well glass lamp/ Cfl all as specified and directed by Engr-in-charge.

Supply and fix in repair 12 watt square/round shaped surface/recess mounted LED slim panel and PMMA diffuser gives soft glare free light, powder coated white finish housing etc,complete fixing in existing place properly all as specified and directed.

Supply and fix CRYSAL GLASS LED TUBELIGHT (Double side connection) 18/20W ultra bright glass LED tubelight with very high efficacy suitable for installation in existing flame proof fitting or T8 tubelight with G13 lamp holders to give glare free light complete all as specified and directed by Engr-in-charge.

Supply and fix surface and wall mounted LED Batten 10W (2 Feet) light fitting with decorative end caps LED lighting fixture delivers high brightness & excillent illumination with extruded Aluminium housing provided for heat resistant acrylic diffuser for glare free uniform light distribution powered by a external electronic constant current driver with no UV & IR radiation, energy efficient ready to use pack 10W LED complete with tube, & duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting to ceiling rose all as specified and directed by Engr-in-charge.

Supply and fix surface and wall mounted LED Batten 20/24W (4 Feet) light fitting with decorative end caps LED lighting fixture delivers high brightness & excillent illumination with extruded Aluminium housing provided for heat resistant acrylic diffuser for glare free uniform light distribution powered by a external electronic constant current driver with no UV & IR radiation, energy efficient ready to use pack 20/24W LED complete with tube, & duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting to ceiling rose all as specified and directed by Engr-in-charge.

Supply and fix 2'x2' 36W LED suitable for armstrong/grid/POP ceiling, ultra slim 2x2 LED flat panel delivers high brightness & excillent illumination with extruded Aluminium housing provided for heat resistant frosted diffuser for glare free uniform light distribution powered by a external electronic constant current driver with no UV & IR radiation complete with seprate electronic driver & high brightness SMD LEDs, complete with connecting accesseries & Driver duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting complete all as specified and directed by Engr-in-charge.

Supply and fix Sauver (Surface) 2x2 36W LED suitable for surface, Surface mounted 2x2 LED panel delivers high brightness & excillent illumination with extruded Aluminium housing provided for heat resistant frosted diffuser for glare free uniform light distribution powered by a external electronic constant current driver with no UV & IR radiation complete with seprate electronic driver & high brightness SMD LEDs, complete with connecting accesseries & Driver duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting complete all as specified and directed by Engr-in-charge.

Supply and fix 1'x1' 20W LED suitable for armstrong/grid/POP ceiling, ultra slim 1x1 LED flat panel delivers high brightness & excillent illumination with extruded Aluminium housing provided for heat resistant frosted diffuser for glare free uniform light distribution powered by a external electronic constant current driver with no UV & IR radiation complete with seprate electronic driver & high brightness SMD LEDs, complete with connecting accesseries & Driver duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting complete all as specified and directed by Engr-in-charge.

Supply and fix LED Unilite 2x20W 4' suitable for surface/Hanging, LED industrial powder coated MS box with twin LED tube delivers high brightness & excillent illumination even in high ceiling areas with CRCA White powder coated provided for frosted heat resistant polycarbonate diffuser for glare free uniform light distribution powered by a inbuilt electronic constant current driver with no UV & IR radiation complete with high brightness SMD, complete with connecting accesseries & Driver duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting complete all as specified and directed by Engr-in-charge.

Supply and fix 1'x4' 40 W LED suitable for armstrong/grid/POP ceiling, ultra slim 1x4 LED flat panel delivers high brightness & excillent illumination with extruded Aluminium housing provided for heat resistant frosted diffuser for glare free uniform light distribution powered by a external electronic constant current driver with no UV & IR radiation complete with seprate electronic driver & high brightness SMD LEDs, complete with connecting accesseries & Driver duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting complete all as specified and directed by Engr-in-charge.

Supply and fix 1'x4' 40 W LED suitable for surface mounting, ultra slim 1x4 LED flat panel delivers high brightness & excillent illumination with extruded Aluminium housing provided for heat resistant frosted diffuser for glare free uniform light distribution powered by a external electronic constant current driver with no UV & IR radiation complete with seprate electronic driver & high brightness SMD LEDs, complete with connecting accesseries & Driver duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting complete all as specified and directed by Engr-in-charge.

Supply and fix Nero Surface mounted (Round) LED 18W downlighter with white powder coated aluminium die cast housing delivers high brightness & excillent illumination even in high ceiling areas with CRCA White powder coated provided for frosted heat resistant polycarbonate diffuser for glare free uniform light distribution powered by a separate electronic constant current driver with no UV & IR radiation, energy efficent surface mounted ready to use pack 18W LED, complete with connecting accesseries duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting complete all as specified and directed by Engr-in-Charge.

Supply and fix LED Bulk Head 10W -IP65 decorative oval bulk head edge LED lighting fixture comprising of pressure die cast housing with acrylic diffuser IP 65 protection, frosted heat resistant polycarbonate diffuser for glare free uniform light distribution powered by a inbuilt electronic constant current driver with no UV & IR radiation,energy efficent surface mounted ready to use pack 10W LED, complete with connecting accesseries duly pre-wired and connecting up with 0.5 Sqmm 3 core flexible Copper cable cord from fitting complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs freedom plus LED Street light 45 W made up of Pressure die cast housing with toughned glass and individual high power LEDs with secondary optics, IP65 protection complete all as specified and directed.

Supply and fix street light bracket 40mm bore GI pipe/tubing light grade 1.5 Mtr long band to shape with MS flat iron 50 x 5 mm for clamps nuts, bolts and washers etc and applying two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed.

Supply and fix in repair industrial LED High bay/flood 70 watt Luminaire ENDURA HIGHBRITE PLUS Energy saving, Enviormental friendly & robust open type vertical Highbay/Mediumbay LED IP 54 luminaire with high power COB LED 70 W 6500K complete all as specified and directed.

Supply and fix in repair industrial LED High bay/flood 150 watt Luminaire ENDURA HIGHBRITE PLUS Energy saving, Enviormental friendly & robust open type vertical Highbay/Mediumbay LED IP 54 luminaire with high power COB LED 70 W 6500K complete all as specified and directed.

Supply and fix in repair outdoor LED Flood Light Luminaire JETA NEO 100 W Energy saving, Enviormental friendly, long life, exclusive innovative die-cast aluminium IP 66 flood light, suitable for highilighting architectural facade and general purpose lighting 100W 6000K complete all as specified and directed.

Supply and fixing for sheet metal inclouser single pole and neutal with 02 Pin and earth plug and socket complete with 01 single pole 20 Amps 240V, MCB complete incl necessary fixing arrangement and all incoming and outgoing electric connection all as specified directed by Engr-in-Charge.

Supply and fix in repair sheet metal enclosure for DBs when MCBs to be used single pole and neutral single door, 240 volt without bus bar 2 way of complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair sheet metal enclosure for DBs when MCBs to be used single pole and neutral with acrylic door IP 43 protection, 240 volt with 200 amps rated bus bar bar 4 way of complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair sheet metal enclosure for DBs when MCBs to be used single pole and neutral with acrylic door IP 43 protection, 240 volt with 200 amps rated bus bar bar 8 way of complete all as specified and directed by Engr-in-Charge

Supply and fix in repair sheet metal enclosure for DBs when MCBs to be used single pole and neutral with acrylic door IP 43 protection, 240 volt with 200 amps rated bus bar bar 12 way of complete all as specified and directed by Engr-in-Charge

Supplying and fix in repair Tempra plug & socket DB and MCBs, triple pole and neutral enclouser with a Four pin and earth plug and socket complete with one TPN MCB, 440V of capacity 32 amps of complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs Sheet metal enclosure for DB’s TPN, with 200 amps rated bus bar, 4 way, 415 volts double door of complete all as specified and directed by Engr-in-Charge

Supply and fix in repairs sheet metal enclouser distribution board 415volt,Vertical TPN 4 Way with provision for suitable MCCB FP up to 125 A as incomer & MCBs SP/TP as out going as per IS including compact insulated bus bar and rounded neutral bar, door earthing complete double door surface/reccess mounting IP-43 protection, including connection with the existing sub circutis, electric meter etc with proper size new copper cable, lugs, connectors etc all as specified directed by Engr-in-Charge.

Supply and fix in repairs sheet metal enclouser distribution board 415volt,Vertical TPN 8 Way with provision for suitable MCCB FP up to 160 A as incomer & MCBs SP/TP as out going as per IS including compact insulated bus bar and rounded neutral bar, door earthing complete double door surface/reccess mounting IP-43 protection, including connection with the existing sub circutis, electric meter etc with proper size new copper cable, lugs,connectors etc complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs sheet metal enclouser distribution board 415volt,Vertical TPN 12 Way with provision for suitable MCCB FP up to 160 A as incomer & MCBs SP/TP as out going as per IS including compact insulated bus bar and rounded neutral bar, door earthing complete double door surface/reccess mounting IP-43 protection, including connection with the existing sub circutis, electric meter etc with proper size new copper cable, lugs,connectors etc complete all as specified and directed by Engr-in-Charge.

Supply and fix for MCB SP 6 to 32 Amps 240 volts 10 KA C series.

Supplying and fixing for MCB SP 40 TO 63 Amps 240 volts.

Supplying and fixing for MCB SPN 40 to 63 Amps 240 volts 10 KA.

Supplying and fixing for MCB TP 40 to 63 Amps 415 volts.

Supplying and fixing for MCB TPN 40 to 63 Amps 415 volts.

Supply and fixing in repairs MCCB, 4-pole, breaking capacity 36 KA, 415 volts, 160 Amps including taking down unservicable one complete all as specified and directed.

Supply and fixing in repairs MCCB, 4-pole, breaking capacity 36 KA, 415 volts, 125 Amps including taking down unservicable one complete all as specified and directed.

Supply and fixing in repairs MCCB, 4-pole, breaking capacity 25 KA, 415 volts, 100 Amps including taking down unservicable one complete all as specified and directed.

Supply and fixing MCCB, 4-pole, breaking capacity 25 KA, 415 volts, 63 Amps including taking down unservicable one complete all as specified and directed.

Supply and fixing MCCB, 3-pole, breaking capacity 25 KA, 415 volts, 63 Amps including taking down unservicable one complete all as specified and directed.

Supply and fixing in repairs MCCB, 3-pole, breaking capacity 25 KA, 415 volts, 100 Amps with enclosers including taking down unservicable one complete all as specified and directed.

Taking down carefully Flame proof wiring complete and removing material from site and making good the disturbed surfaces of walls/ ceiling etc. complete all as specified and directed.

Taking down carefully unserviceable FLP WP well glass fittings, bulk head fittings, tube light fittings complete and removing material from site and making good the disturbed surfaces of walls/ceiling etc complete all as specifed and directed.

Taking down carefully unserviceable FLP WP switch sockets, junction box complete and removing material from site and making good the disturbed surfaces of walls/ceiling etc complete all as specified and directed.

Material and labour for point wiring FLP-WP with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed (FRLS) cable, multi-stranded, copper conductor, in universal colour code in & including ERW metallic rigid steel conduit including earth wire of PVC insulated FRLS copper conductor of 1.5 Sqmm size in green colour making good the disturbed surfaces, for one light/fan point controlled by one switch complete all as specifed and directed.

All as per serial item No 76.00 above but for 3 pin / 5 pin, 16/25 Amp socket outlet point controlled by one switch and wiring with 4.0 Sqmm PVC insulated (FRLS), multi-stranded, unsheathed copper conductor cable & 2.5 Sqmm unsheathed PVC insulated (FRLS) earth wire on Independent board.

Material and labour for point wiring FLP-WP with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed (FRLS) cable, multi-stranded, copper conductor, in universal colour code in existing ERW metallic rigid steel conduit including earth wire of PVC insulated FRLS copper conductor of 1.5 Sqmm size in green colour making good the disturbed surfaces, for one light/fan point controlled by one switch complete all as specifed and directed.

All as per serial item No 77.00 above but for 3 pin / 5 pin 25 Amp socket outlet point controlled by one switch and wiring with 4.0 Sqmm PVC insulated (FRLS), multi-stranded, unsheathed copper conductor cable & 2.5 Sqmm unsheathed PVC insulated (FRLS) earth wire on Independent board complete all as specified and directed.

Supply and fixing in repairs FLP - WP well glass fitting suitable for 150 watt LED, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection duly wired complete with necessary fixing arrangement and electric connection three core flexible copper conductor cable with suitable size and testing complete all as specified and directed.

Supply and fixing in repairs FLP - WP well glass fitting suitable for 100 watt LED, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection duly wired complete with necessary fixing arrangement and electric connection three core flexible copper conductor cable with suitable size and testing complete all as specified and directed.

Supply and fixing in repairs FLP - WP well glass fitting suitable for 70/72 watt LED, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection duly wired complete with necessary fixing arrangement and electric connection three core flexible copper conductor cable with suitable size and testing complete all as specified and directed.

Supply and fixing FLP - WP Bulk Head LED 30 W fitting duly wired complete with necessary fixing arrangement and electric connection and testing complete all as specified and directed.

Supply and fixing in repairs FLP WP Rotary switch with cable terminal box LM-6 material single pole, on & off 16 Amp 250 VOLT complete all as specified and directed.

Supply and fixing in repairs Junction box with plain cover in LM-6 metrial entery size 3/4" ET, dia 80 mm and depth 40mm, 4 way complete all as specified and directed.

Supply and fixing in repairs FLP-WP switch socket & metalic top plug combination in LM- 6 material rating 16 Amps, 250 V, 2 pole plus earth with plug including necessary fixing arrangement & all out going electric connection complete all as specified and directed.

Supply and fixing in repairs FLP-WP Switch socket and metalic top plug combination in LM-6 material rating 32 Amp, 250 V, 2 pole plus earth with plug including necessary fixing arrangement and all out going electric connection complete all as specified and directed.

Supply and fixing in repairs FLP-WP Switch socket and metalic top plug combination in LM-6 material rating 32 Amp, 440 V, 4 pole plus earth with plug including necessary fixing arrangement and all out going electric connection complete all as specified and directed.

Supply and fixing in repairs FLP-WP Switch socket and metalic top plug combination in LM-6 material rating 63A , 440 V, 4 pole plus earth with plug including necessary fixing arrangement and all out going electric connection complete all as specified and directed.

Material and labour for sub main wiring with two run single core 10 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in ERW steel conduit 40 mm dia having wall thickness 2 mm, with and including 10 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor green colour as earth wire complete all as specified and directed. Note: 02 run single core 10 sqmm cable and one run 6 sqmm earth wire shall be measured as unit.

Material and labour for sub main wiring with 4x 16 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in ERW steel conduit of suitable dia having wall thickness 2 mm, with and including 10 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor green colour as earth wire complete all as specified and directed. Note: 04 run single core 16 sqmm cable and one run 10 sqmm earth wire shall be measured as unit.

Supply and fixing in repairs 150 W HPMV Lamp complete all as specified and directed.

Disconnect and insulate electric supply wire and taking down carefully ceilling/ exhaust fan of any make and sweep dismantlling blades, check for repairs required, & refixing complete all as specified and directed by Engineer-in-Charge.

Supply and fix capacitor suitable for 230 volt single phase for ceiling fan 2.5 mfd as specified and directed by Engr-in-Charge.

Supply and fix capacitor suitable for 230 volt single phase for exhaust fan fan 3.15/4 mfd. complete all as specified and directed by Engr-in-Charge.

Material and labour for service cable 16 Sqmm 2 core 1100 volts grade heavy duty cable PVC insulated stranded alumn conductor, served with an inner sheathing of PVC tape and overall PVC sheathed in service connections/perimeter light supply as per site requirement, flat or circular all as required or directed.

Material and labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick,burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of the plate not less than 1.5 Mtr below normal ground level,connected to galvanized iron wire of 4 mm dia earth lead by means of bolts,nuts ,washer and check nut of galvanized steel, earth wire protected by and including GI pipe 15 mm bore (light grade) and connected to main switch / MCB DBs box point as directed and including cement concret pit with CI cover 10 mm thick hinged to CI frame all as shown under electrical plate No 3 SSR Pt - I 2009 including painting the external surface of chamber & cover with enamel paint in diffrent colour as directed and writing earth results & date of test carried out with white paint on black painted background, wiremesh funnel, 20mm bore GI Pipe (Medium grade) for watering, charcoal and salt in alternative layers of 15cm thick all arround the electrode, including necessary excavation and earth work in any type of soil complete all as shown in electrical plate of SSR part -I and testing on completion all as directed.

Supply and fixinf for flame proof exhaust fann 305mm complete with louvers, bracket etc. 230 volts AC 50 Hz heavy duty 1440 RPM all as per specified and directed by Engr-in-Charge.

Supply and fixing AC single phase static energy meter of accuracy class 1.0, 240V, 50 Hz with Backlit LCD display of rating 5-30 A (Measures and displays KWH, V, Current I, KW, power factor last month history of KWH, MD in KW) with special features like TOD, tempoer logging, optical communication port display in absence of power with transparent hinge type box.

Arun enterprises

Alpha Engineers and Builders

D.N.Gupta and Sons

SANJEEV ENTERPRISES