Construction of 1x6.3 MVA 33/11 KV Receiving Station at Behrampora Rafiabad--11 KV line on 09 Mtr long ST Poles with 52 Mtr Span with 0.1 ACSR Conductor (4.3 KMs) (Construction of HT Line for evacuation of Power from Newly Constructed Receiving Stati

Amount

Supply , Transportation and errection of 9MTR long ST Poles (410 SP-33) completely errected in the pit of 1/5th of the pole length including excavation and back filling of the pole pit. (as per REC Standard)

Supply,Carraige upto site,, laying ,stringing, tensioning , binding of ACSR Conductor, (100mm2 ACSR Conductor) as per REC standard.

Supply, transportation and fixing of GI Channel /Angle Iron for Cross Arms, Braces, Transformer Belt, F-Top, Collers etc for Sub Station and poles (Complete Job including Nuts & Bolts and Washers)

Supply and fixing of 11 KV Link Set (line type isolator Heavy Duty ) 600 AMP including nuts and bolts, washers, clamps etc. complete job as per REC standard. (Drilling of holes prohibited)

Supply and fixing of 11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Supply, Carriage up to site, Installation, testing and Commissioning o 11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Earthing of ST Poles(HT) Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip

Supply, Carriage up to site, Installation, testing and Commissioning of Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2 Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Supply, Carriage up to site, Installation, testing and Commissioning of danger Plates with clamps etc.

Supply, Carriage up to site, Installation, testing and Commissioning of anti-climbing devices with clamps etc.

Cement bottoming of S.T poles in 1:2:4 mix 1/6th of the height of pole below the ground and 1ft above the ground cylnerical shape with circular radius 9” from the pole centre) using 40mm crushed stone aggregate mix. As per Drawing 0.5 cum/pole Pit =( 600x600x1600)& Tappered at the Top. (as per REC standard) for 9 MTR ST Pole

Painting of ST Poles with one coat of red oxide and two coats of aluminum paint to give an even shade using anti corrosive paint of standard brand (Nerolac/ Asian) paints) including cost of paint.

Supply, Carriage up to site, Installation, testing and Commissioning of Sundry items like Aluminium lugs, Jumpers, Binding tapes etc.

Pre, during and post geo tagged photographic evidence consisting of 5x7 inch photographs in coffee table book (covering each pole/Sub Station)

SAMAH ENGINEERING SERVICE PVT LTD

M/s ABUTURAAB ELECTRICAL ENGINEERING

M/S KHAN ELECTRICALS

M/S BILAL ELECTRICALS

M/S FANCY ELECTRIC AND STEEL FABRICATORS