Development of Kovalam and Adjacent Beaches Phase 1(Renovation of existing walkway at Light House Beach and rectification works for the existing amenity centre on Corporation land)

Demolition

15.19 Dismantling steel work manually / by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per directions of Engineer -in-Charge.

15.2.1 Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

15.3 Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.

15.9.2 Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in- Charges:In cement mortar

15.23.1 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

OD205624/2025-2026 Dismantling of existing Cast Iron (C.I.) lamp post, including careful removal of all components (base, pole, lantern, electrical connections), transportation of salvageable parts, and disposal of debris as per municipal regulations.

Walkway Construction

2.33.1 Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyound 30 cm girth up to and including 60 cm girth

OD207138/2025-2026 Dismantling Stone Masonry of existing structures in walkway structure comprising of stone masonry, including disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 m (D) Dry Rubble Masonry

7.1.1 Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

4.1.5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

5.33.1.3 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement All work upto plinth levelConcrete of M35 grade with minimum cement content of 370 kg /cum

OD187083/2025-2026 Supplying and placing high corrossion resistant steel (HCR) for RCC work including straightening,cutting,bending ,placing in position and binding all complete .HCR bars of grade Fe500d or more- Upto plinth level

60.7.2 DR PACKING Under foundation - Dry stone packing under foundation with good quality blasted rubble including conveyance of material and labour charges etc. complete as per direction of departmental officers at site.

51.2.4 Filling with Sand Supplying and filling sand in foundation trenches of culvert for stabilizing the top clay layer including watering, ramming, consolidating and dressing, etc complete for improving bearing capacity of soil.

11.20.2 Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Medium shade pigment using 50% white cement 50 % Grey cement

22.24 Providing and applying integral crystalline (dry shake) of hydrophilic in nature for waterproofing treatment to the RCC structures like basement raft, foundation slab,sewage & water treatment plant slab, warehouses floor, parking structures and water tank base slab etc. sprinkled @0.60kg per sqm or higher as recommended by the manufacturer's specification over the lean concrete of above cited structures. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e. by reducingpermeability of concrete by more than 85%, compared control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline dry shake shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-incharge. The product performance shall carry guarantee for 10 years against any leakage.

OD195997/2025-2026 Providing and fixing stainless steel (Grade 316) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

5.9.1 Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

19.19.1.1 Providing and fixing in position Pre-cast R.C.C. manhole cover and frame of required shape and approved quality. L D - 2.5Rectangular shape 600x450 mm internal dimensions

OD201050/2025-2026 Filling available rubble at a depth required at site, using material taken out from the existing walkway, consolidating each deposited layer by ramming and watering, including all labour, tools, and equipment, with a lead up to 50 meters and a lift up to 1.5 meters, all complete as per the direction of Engineer-in-Charge.

OD201081/2025-2026 Providing and laying polyethylene plastic vapor barrier above sand layer as per the directions of engineer in charge

OD206661/2025-2026 Supplying SS GARBAGE BIN WITH HINGED LID with 120 Litre Capacity. The cylindrical bin shall made of 304 grade stainless steel of 18G thickness. The base of the bin shall be fixed on a stainless steel ring of suitable thickness not less than 14G to have a ground clearence of 7.5cm for base. The bin shall have foldable handles on sides. All edges shall be rounded to avoid sharp edges and pleasent appearence. (The sample shall be approved before effecting the full supply)

Toilet Block

13.5.1 15 mm cement plaster on rough side of single or half brick wall of mix:1:4 ( 1 Cement : 4 coarse sand)

13.43.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

13.61.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

13.83.2 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile including applying additional coats wherever required to achieve even shade and colour.Two coats

Edakkal Rocks- Building Renovation

2.31 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared

13.43.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

13.5.1 15 mm cement plaster on rough side of single or half brick wall of mix:1:4 ( 1 Cement : 4 coarse sand)

13.61.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

13.48.2 Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 ltr/10 sqm of approved brand and manufacture

21.1.1.2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

9.7.7.2 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:5.0 mm thick glass panes (weight not less than 12.50 kg/sqm).

15.57 Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by Engineer - in-Charge

17.3.1 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid

50.17.1.5 Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

50.17.1.1 Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

18.51.1 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore

OD188544/2025-2026 Providing and fixing of PVC multifloor traps 75x110mm size with ss gratings of 150x150mm to toilet floors and making good the concrete floor as per direction of engineer in charge

OD194883/2025-2026 Modified from 11.41.2 providing and laying vitrified tread profile anti slippery floor tiles in different sizes (thickness to be specified by the manufacture)with water absorption less than 0.08% and conforming to IS :15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4(1cement:4coarse sand).including grouting the joint with white cement and matching pigments etc.complete size of tile 600x600 mm.

11.39 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make in colours White, Ivory, Grey, fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete.

50.18.8.9.1 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2

50.18.9.19.1 Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall

18.7.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall20 mm nominal dia pipes

18.8.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.20 mm nominal dia pipes

OD195494/2025-2026 Providing and laying Antiskid Ceramic floor tiles 300x300x7 mm of Ist quality conforming to IS : 15622 of approved make,shade,and pattern laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.including cost and conveyance of all materials,labour charges,lead,lift etc, complete as directed by the Engineer-in-Charge at all levels. Details of cost for 1 sqm MATERIAL: Glazed Ceramic floor tiles 300x300 mm size = 1.00 sqm

15.23.1 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

Corporation Land

2.31 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared

10.16.1 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

12.48 Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately)

12.49 Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20 mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid separately ).

6.4.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in:Cement mortar 1:6 (1 cement : 6 coarse sand)

13.7.2 12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1 cement : 4 fine sand)

13.8.2 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix:1: 4 ( 1 cement : 4 fine sand)

13.43.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.48.1 Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm

13.62.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

2.33.1 Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyound 30 cm girth up to and including 60 cm girth

4.1.5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

OD199259/2025-2026 Supplying and fixing granite stone bollards 150 mm dia height 1100 mm fixed in cement concrete 1:2:4 ,900 mm above ground , (the size ,finish and designs of bollards to be approved by engineer in charge )

17.3.2 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.c. pan with ISI marked black solid plastic seat and lid

50.17.1.1 Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

50.17.1.5 Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

18.51.1 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore

17.7.4 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap

18.53.1 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore

17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

OD199613/2025-2026 Providing, Fixing, testing and commissioning at site in position PVC Fabricated Multi Floor Trap, with thrust block support including complete cost of cutting chases and making good the walls in all respects - 100/75 mm dia inlet/outlet 100 mm inlet and 75 mm outlet

50.18.8.9.1 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2

50.18.9.19.1 Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall

18.7.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall20 mm nominal dia pipes

18.8.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.20 mm nominal dia pipes

10.25.2 Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

30.2.29.1 Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos ( 3 nos horizontal & 4 nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officerin- charge.Top inside dia 35 cm, outer bottom dia 25 cm, total height 35 cm with wall thickness of 25.4 mm

OD199353/2025-2026 Supply and stacking of plant Tecoma stans of height 90-105 cm. bushy in big size HDPE bag: Rs 120

16.68 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

50.17.1.3 Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-incharge.

18.22.1 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:100 mm diameter

17.34.1 Providing and fixing toilet paper holder:C.P. brass

13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Police Aid post

6.3.2 Brick work with common burnt clay machine moulded perforated bricks of classdesignation 12.5 conforming to IS: 2222 in superstructure above plinth level up tofloor five level in cement mortar 1:6 (1 cement : 6 coarse sand):With Modular bricks

13.5.1 15 mm cement plaster on rough side of single or half brick wall of mix:1:4 ( 1 Cement : 4 coarse sand)

13.5.2 15 mm cement plaster on rough side of single or half brick wall of mix:1:6 ( 1 cement : 6 coarse sand)

13.43.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.110.1 Finishing walls with textured exterior paint of required shade :Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm.

13.83.2 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile including applying additional coats wherever required to achieve even shade and colour.Two coats

21.1.1.2 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

9.7.7.2 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:5.0 mm thick glass panes (weight not less than 12.50 kg/sqm).

15.12.1 Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below

Landscaping

30.2.57.1 Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unsaverieable material?s as per direction of officer in charge (excluding cast of plant & water )Cost of plantation per trees plants (for 100 nos.=427.45/100)

30.2.2 Supplying and stacking of good earth at site including royalty and carriage upto 5 k.m. lead complete (earth measured in stacks will be reduced by 20% for payment).

30.2.29.1 Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos ( 3 nos horizontal & 4 nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officerin- charge.Top inside dia 35 cm, outer bottom dia 25 cm, total height 35 cm with wall thickness of 25.4 mm

ELECTRIFICATION-BEACH WALKWAY

1.10.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C

1.14.1 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire

1.14.2 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

1.17.11 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 2.5 sq. mm

1.21.1 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

1.24.1 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

1.24.4 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet

1.24.5 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet

1.27.2 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)

1.27.4 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm)

1.24.3 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch

90.3.22.3 Supply & installation of light fittings on flat iron bracket Supply, conveyance, installation, testing and commissioning the light fittings of following types made of CRCA sheet of .5mm thickness complete with all accessories and lamps etc. directly on wall using 2 nos. flat iron brackets made from 25x6mm flat iron, painting the flat iron bracket and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required.1200 mm 1X20W LED Lamp with box type fixture

OD201328/2025-2026 Supply and fixing of 20 W LED bulb with all accessories

90.4.5.4 Supply, Installation, testing and commissioning of ceiling fan of following sizes including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. 1200mm sweep - ceiling fan complete with service value minimum 4.0(cub meter/minute/Watt), Air delivery minimum 210(cubic meter/minute), Copper winding suitable for 230V/240V single phase AC supply

90.12.5.28 Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 35 sq mm

90.12.5.38 Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 4 sq mm

90.12.5.40 Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 10 sq mm

90.12.5.41 Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 16 sq mm

90.16.1.3 Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

OD188989/2025-2026 Supplying and providing of maintenance free earthing system comprises of molecularly bonded copper of 99.9% purity on low carbon steel of min 3048mm length (10 feet), having a diameter of 20mm with copper bonding thickness of 250 microns. The Rod has to be either continuous or with self-coupling peg & bore arrangement with fault current withstand capability of 30 kA rms value for 1 second and I peak of 76 kA. The rod must be having corrosion test, peel off test for uniform coating, 180 degree bend test with out peel off of copper bonding. Exothermic welded clamp for clamping as suggested as per NBC 2016. Ordinary stainless steel/Copper alloy universal clamps are not recommended. For self coupling peg & bore arrangement rod needs Impact point on the bottom rod for easy insertion. Earth enhancing mineral compound is used for improving the soil conductivity. The material shall be mineral inert to sub soil and shall not pollute the environment and non corrosive to earth rod. The material should have a resistivity less than 0.2 ?m. It should be free from hazardous substances. The mineral compound is required to have minimum 17.5 Kg of the total composite. The compound should be chemically inert. Concrete earth electrode inspection chamber with weight bearing capacity of 30kN. The dimension shall be 320mmX 320mmX 190mm.

2.10.2 Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole and netural

OD201321/2025-2026 Outdoor Feeder Pillar with Street Light Control Panel-Supply, installation, testing and commissioning of Outdoor Feeder Pillar with Street Light Control Panel, fabricated from 2.0 mm thick CRCA / SS 304 marine-grade sheet steel, suitable for coastal and saline environments such as beachside installations. The panel shall be of Form-4 type construction, IP65 minimum protection class, free-standing, floor-mounting, dust-proof, vermin-proof, and corrosion-resistant, designed for continuous operation on 415V, 3 Phase, 4 Wire, 50Hz AC system. The panel shall be compartmentalised, with separate chambers for incomer, busbar, and outgoing feeders. It shall be provided with EPDM/neoprene gaskets for weatherproof sealing against moisture and salt ingress. The entire construction, including the base frame, shall be suitable for marine and coastal atmospheric conditions (ISO 12944 C5-M category), with the following corrosion protection features integrated.All sheet metal parts to undergo a marine-grade seven-tank pretreatment process, followed by zinc phosphate coating and UV-stabilised polyester powder coating (minimum 80-micron thickness).All external hardware (bolts, nuts, washers, hinges, handles, etc.) shall be of SS 304/316 grade.The base frame shall be hot-dip galvanised (minimum 80-micron coating thickness).Busbar supports and insulation materials shall be non-hygroscopic and salt-resistant.All cable entries shall be sealed using weatherproof cable glands to prevent ingress of dust, water, and salt.The panel shall be provided with an anti-condensation heater with thermostat and interior LED light for maintenance visibility. All internal wiring shall be carried out with HFFR insulated flexible copper wires/cables of adequate size with properly crimped ferrules. The panel shall be manufactured and type-tested by a CPRI-certified firm, with valid test certificates for short circuit withstand capacity, temperature rise, dielectric strength, and IP65/IP66/IP67 ingress protection.Top canopy and necessary overhang, undergone seven tank process ,powder coated finish and all mounting accessories A separate KSEB metering compartment shall be provided with a lockable door and toughened glass viewing window for the energy meter, complete with KSEB sealing provision. The metering section shall include KWH METER, 3 Nos. 63A Cutouts with HRC Fuses (or as per KSEB standard), neutral link, and earth bar with proper earthing arrangements. Incomer: RYB indicator with control fuses1 set, busbar-mounted surge protection device (Type-1)1 no, 63A FP Isolator1 no, digital time switch with astronomical function with 63A contactor. Busbar: TPN copper busbar suitable for 63A Outgoings: 40A FP 30mA RCBO-5 nos

90.12.9.3 Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench63/50 mm or nearest size

OD195281/2025-2026 Supply and installation of integral single/double-sided LED Signage(Type 1/Type 2) with extruded aluminium HSG incorporate LEDs, driver, battery and other accessories as per dimensions and design shown in technical drawings. Matter is laser engraved on an acrylic sheet. A chain is provided for pendent mounting for directional purposes of approved make

OD195282/2025-2026 Supply, installation, testing and commissioning of decorative architectural twin arm lighting pole of 4M height above ground level, manufactured from GI tubular steel or Materials - Die-cast and sheet aluminium (UNI EN 1706). MS pipe of grade YST 210/240, with hot dip galvanisation as per ASTM A123/IS 2629 (minimum average coating 65μm) followed by multi-layer protection comprising epoxy zinc-rich primer and polyurethane (PU) marine-grade paint / 3-layer system (etching primer, epoxy primer and PU topcoat in Neri grey colour) with overall coating thickness not less than 160μm. The pole shall be of composite construction, designed to withstand a basic wind speed of 169 km/h as per EN40 standards, complete with inbuilt junction box at the bottom section with heavy duty 32A, 4-way connector for loop-in/loop-out wiring and provision for MCB,Provision for accommodating CCTV cameras . The shaft shall be provided with flush door at the bottom with proper strengthening, mounted on a base plate of minimum 250x250x12 mm or with foundation bolts M16x450 mm as required. Decorative embellishments/cast iron base/flower elements shall be securely fitted to the column and sealed against ingress. The complete pole shall be suitable for urban/decorative lighting applications and finished to ensure long-term corrosion resistance and aesthetic appearance.

OD195283/2025-2026 Supply, installation, testing and commissioning of Decorative Suspended/Post Top Style LED Street Lantern, 40W, BIS certified, with spun or die-cast aluminium housing and hinged frame, permanently sealed optical block (IP66) with integrated heatsink and gasket protection. The optical system shall consist of high-efficiency temperature-resistant lenses providing symmetric light distribution, with a dropshaped transparent/frosted PMMA or UV-stabilised polycarbonate diffuser having impact resistance of IK06/IK09. The luminaire shall have a system efficacy of not less than 120 lm/W at 3000K CCT, with CRI greater than 70 (optional 80 CRI) and a rated lifetime of L70 ≥ 50,000 hours. Electrical characteristics shall include Class I protection, rated voltage of 240V AC, 50 Hz frequency, power factor ≥0.95, and BIS-certified potted driver with internal surge protection of 4/4 kV, along with an additional external SPD of 10/10 kV in both common and differential modes. The fitting shall have a weight of approximately 8 kg with a wind-exposed area of 0.135 m², and suitable for suspended installation using thread coupling G3/4" (ISO 228/1 BSP/G) or a galvanised painted bracket. The luminaire shall be BIS certified and suitable for decorative street and urban lighting applications"

OD201324/2025-2026 Supply of 20 W LED BOLLARD light fixture, marine grade housing (e.g., corrosion-resistant aluminium alloy or SS components), sealed to at least IP66 (ideally IP67/68) for saline/coastal environment, beam angle ~ spot / narrow, with driver suitable for outdoor marine ambient use.

OD201325/2025-2026 Supply of 20 W LED spot light fixture, marine grade housing (e.g., corrosionresistant aluminium alloy or SS components), sealed to at least IP66 (ideally IP67/68) for saline/coastal environment, beam angle ~ spot / narrow, with driver suitable for outdoor marine ambient use.

OD201339/2025-2026 Supply and fixing of 150 mm sweep exhaust fan with all accessories

ELECTRIFICATION-CORPORATION LAND

1.10.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C

1.14.1 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire

1.14.2 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

1.14.3 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire

1.17.2 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 1.5 sq. mm

1.21.1 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

1.24.1 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

1.24.3 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch

1.24.4 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet

1.24.5 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet

1.24.6 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Telephone socket outlet

1.24.7 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.TV antenna socket outlet

1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

1.28.2 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.3 Module

1.28.4 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.6 Module

1.28.6 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.12 Module

1.58 Supplying and fixing PVC batten/ angle holder including connection etc. as required.

2.10.1 Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

2.14.1 Supplying and fixing following rating, double pole, (single phase and neutral),240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25 amps

2.5.2 Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required .(Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)8 Way(4+24), Double door

2.10.2 Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole and netural

2.11 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

2.12.1 Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.13.2 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

2.3.1 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way, Double door

90.12.5.3 Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.2 core 10 sq mm

90.12.5.41 Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 16 sq mm

5.1 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt ) as required.

90.15.4.1 Supply Conveyance, installation, testing and commissioning of 20W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD Less than10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

OD211114/2025-2026 Supply and fixing 2 meter Alluminium rods for street light with all accessories.

90.16.1.3 Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.3.23.5.3 Surface mounting decorative fluorescent tube light fitting complete with lamp with complete accessories duly wired up for use on 230 V AC .Surface mounting LED 20W LED Batten with out put 2000 lumen for use on 250V AC supply.

90.4.5.4 Supply, Installation, testing and commissioning of ceiling fan of following sizes including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. 1200mm sweep - ceiling fan complete with service value minimum 4.0(cub meter/minute/Watt), Air delivery minimum 210(cubic meter/minute), Copper winding suitable for 230V/240V single phase AC supply

90.4.8 Charges for cutting holes suitable for accommodating exhaust fans up to 305mm sweep including plastering colour washing etc. as required.

90.5.1.3 Supply and fixing the following types of superior quality 250V A.C call bell on existing M.S. box and giving connections with required length of 3 core, 16 / 0.20mm 650/1100V grade PVC insulated and PVC sheathed round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, earthing the MS box and making good the surface as required.Ding dong bell

90.3.19.3 Supply conveyance, installation, testing and commissioning the light fittings of following types made from CRCA sheet 0.5mm thickness with all accessories and lamps directly on wall and giving connections with 16/0.20 mm 3 core PVC insulated and sheathed round copper conductor flex wire or extending the original wiring and giving connections as required1200 mm 1X20W LED Lamp with box type fixture

OD201341/2025-2026 Supply and fixing of 150 mm sweep exhaust fan with all accessories

OD201342/2025-2026 Supply and fixing of 20 W LED bulb with all accessories

OD201343/2025-2026 Supply of 20 W LED BOLLARD light fixture, marine grade housing (e.g., corrosion-resistant aluminium alloy or SS components), sealed to at least IP66 (ideally IP67/68) for saline/coastal environment, beam angle ~ spot / narrow, with driver suitable for outdoor marine ambient use.

OD201344/2025-2026 Supply of 20 W LED spot light fixture, marine grade housing (e.g., corrosionresistant aluminium alloy or SS components), sealed to at least IP66 (ideally IP67/68) for saline/coastal environment, beam angle ~ spot / narrow, with driver suitable for outdoor marine ambient use.

OD201350/2025-2026 Supply and fixing of 20 W gate lamp with all accessories and suitable marine grade for existing gate.

OD203095/2025-2026 Supply, installation, testing, and commissioning of KSEB meter board, suitable for accommodating 3 nos. of 63A cutout with HRC fuse( or as per KSEB), neutral link , TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.63 Amp TP & N as required, and necessary supports to be fabricated out of 14 SWG CRCA sheet with lockable door with sealing facility having glass window for energy meter, sealing facility for KSEB, top canopy, and necessary overhang, having undergone a seven-tank process ,powder coated finish and all mounting accessories. The panel shall be with all accessories as per drawing &specification.

OD204934/2025-2026 Charges for KSEB Service connection paper charges (including the preparation of completion report, drawings and other necessary papers like power allocation etc.) the rate exclusive of all government fees.

OD205322/2025-2026 supply and fixing manual changeover over switch with enclosure (IP65) for outdoor purpose with all accessories.

ELV-CCTV&PA SYSTEM

OD203700/2025-2026 Supply, Installation, Testing and Commissioning of 2 kVA Online UPS with 48 V DC battery bank comprising 4 Nos. × 12 V, 100 Ah VRLA (SMF) batteries connected in series to provide 48 V, 100 Ah. Designed to give ~1 hour backup at full UPS load;230 V AC, 50 Hz, single phase in/out, rated capacity 2 kVA / 1.6 kW (PF 0.8). Input voltage range 160–280 V AC, frequency 50 Hz ±5%. Output voltage regulation ±1%. Pure sine wave output, THD < 2%, crest factor ≥ 3:1, transfer time 0 ms. Efficiency ≥ 90%. LCD/LED display for input/output/battery/load/alarms. Communication: RS-232 / USB (SNMP slot provision). Protections: over-voltage, short-circuit, overload, battery deep-discharge, over-temperature. Inbuilt static & manual bypass. CE/IS compliant. Complete with interconnections and accessories.

OD195664/2025-2026 "Supply and installation of 9U WALL Mount Network Rack with Glass Door, Rack Mountable Fan, 2 No of Rack mountable Vertical PDU with Minimum 6 Sockets 5/15A indian round pin , Lock & Key and Mounting Accessories."

1.53.1 Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable

OD203594/2025-2026 Supply and installation of 1 Meter Cat 6 UTP Patch Cord

OD203595/2025-2026 Supply and installation of Cat 6 RJ 45 Connectors with boot.

OD195665/2025-2026 Supply and installation of 43" HD LED 24 x 7 monitor.

OD195666/2025-2026 Supply, Installation Testing and Commission of 64 Channel NVR support upto 8MP at 320mbps or higher , Supports 4K, 4 HDD SATA supports , HDMI,VGA support, H264/H.265 Compression, RAID 5 Support, Onvif profile.Three year warranty.

OD195667/2025-2026 Supply and installation of Base-Lx to 1000 Base-T PoE Media Converter

OD195712/2025-2026 Supply and installation of 8 Port Manageable PoE Switch with min 2 x 1G Uplink Port.

90.12.9.2 Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench50/38 mm or nearest size

1.21.1 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

OD195669/2025-2026 Supply, Installation Testing and Commission of 5MP IP Outdoor Bullet Camera, 3.6mm or optional fixed lens , H.265/H.264 encoding, Day/Night (ICR), 120WDR, IR LEDs Length 30m, Onvif, IP66 or Higher, PoE.

OD199630/2025-2026 Supply, Installation Testing and Commission 5 MP- PTZ camera with Built in AI, Electronic Image stabilization, IP66, Nema 4X, IK 10, Cyber security Certificate, Smart Tracking for Moving people.

OD195782/2025-2026 Supply and installation of Ethernet PoE surge protection device for camera.

OD203187/2025-2026 Supply and installation of 6 TB Surveillance hard disk

OD203188/2025-2026 Supply and installation of 1G SFP Module

OD203196/2025-2026 Supply and installation of 12 Port fully loaded LIU with sliding drawer for ease of reconfiguring fibers, adhesive labelling for port identification, rack mountable with 1 RU size and with necessary LC/LC connectors

OD203197/2025-2026 Supply and installation of Single Mode duplex optical patch cord, LC/UPC-LC/UPC connectors as suitable for the used LIUs and modules, 2m/1m length and with LS0H Cable Sheath Material.

OD203189/2025-2026 Single Bare Splicing Charges for Optical Fiber Outdoor OS2 Single mode Cable with Line Test

OD203097/2025-2026 Supply and Laying of 6 Core Optical Fiber Cable Outdoor OS2 Single mode

OD201352/2025-2026 Supply, Installation, Testing & Commissioning of IP66 FRP/Polycarbonate junction box with SS316 hardware, suitable for 2C speaker cable looping and termination; weatherproof glands and terminals included.

OD201353/2025-2026 Supply, Installation, Testing & Commissioning of Gooseneck type desktop mic with push-to-talk, pre-amplifier, LED indication, corrosion-resistant metal body, suitable for 100V system.

OD201354/2025-2026 Supply, Installation, Testing & Commissioning of Public Address Amplifier (100V Line Type-250W RMS amplifier with mic/line inputs, short circuit and overload protection, 5-band equalizer, priority paging facility, rack mountable, 230V AC supply.

OD201355/2025-2026 Supply, Installation, Testing & Commissioning of 30W/50W Outdoor Horn/Column Speakers, 100V line, IP66 or higher, UV-resistant ABS / FRP body with SS316 bracket, salt spray tested (1000 hrs ASTM B117), frequency response 100Hz–15kHz, SPL ≥110dB @1W/1m.

OD201357/2025-2026 Supply and installation of 12U WALL Mount Network Rack with Glass Door, Rack Mountable Fan, 2 No of Rack mountable Vertical PDU with Minimum 6 Sockets 5/15A indian round pin , Lock & Keyand Mounting Accessories.with cooling fan, power distribution unit, cable management, suitable for amplifier and mic installation

OD201363/2025-2026 Supplying and drawing of 2C x 2.5 sq.mm tinned copper FRLS UV-resistant cable, suitable for outdoor laying and high humidity marine atmosphere. in the existing surface/recessed steel/PVC conduit as required

OD203211/2025-2026 Painting the existing pole to accommodate speakers on the seaside with marine-grade paint