SPECIAL REPAIR TO EXISTING PERIMETER FENCING WALL UNDER GE SAMBA.

Amount

Dismantling of existing posts or struts any description (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed portion. Post embeded in natural ground complete all as specified and directed.

Dismantling of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc and removal of rubbish out off the premises complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description in any position complete all as specified and directed.

Taking down cement plaster on brick or stone walls,etc including racking out joints , hacjking for keys,scrubing down with water etc, and removal of rubbish out off the permises complete all as specified.

Demolition of cement concrete (reinforced) as in Roof, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed

M&L for Brick work with Fly Ash Brick (Non-Modular) straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for Brick work (except bricks) (old serviceable bricks retrieved from dismantling) straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. Note : Serviceable Brick retrieved from dismantling shall be reused in this work.

S&F in repair Galvanised (medium coated as per IS 4826) 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rail staying bolts including securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins complete all as specified and directed (Each line of wire to be measured)

All as per item No 08 above but fixing only in repairs complete all as specified. (Note: Each line wire to be measured)

Restraining & resecuing including making good staples etc of Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or typing at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc as directed (Each line wire to be measured)

S&F repairs Concertina coil having dia 600mm with blade thickness 0.47mm and core wire diameter 2.5mm with minimum zinc coating on wire minimum 275 GSM complete all as specified and directed .

Fixing only in repairs Concertina coil having dia 600mm with blade thickness 0.47mm and core wire diameter 2.5mm with minimum zinc coating on wire minimum 275 GSM complete all as specified and directed.

M&L RCC (1:1 ½ :3) type A-1 using 20mm graded stone aggregate as in slab supported on walls, beams and columns in floor, roofs, landing, balconies, canopies, deck slab, shelves and the like complete all as specified and directed.

Form work to sides of footing , plinth beams , base of column sides & soffits (if any) of foundation and plint beam and similar works for fair finished surfaces complete all as specified and directed.

M&L TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and directed.

All as per item No 15 above but for 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders complete all as specified and directed.

M&L Cement concrete (1:2:4), type B1 using 20mm graded stone aggr) as in lintels upto 1.5m clearspan, cills, steps, seismic and other milar bands, plinth courses, string courses lacing courses, parapets and ilings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including ring, slightly rounded or chamfered angles and throating as directed.

M&L for PCC (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) as in coping including necessary form work complete all as specified and directed.

M&L for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

All as per item No 19 above but one coat of synthetic enamel paint on old surfaces all as specified and directed.

M&L for preparation of newly plastered surface on walls and applying two coat of cement base paint over and including a coat of primer as per manufactuors instructions complete all as specified and directed.

All as per item No 21 above but one coat of cement base paint on old decorated surface complete all as specified and as directed

M&L for Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and secrwing etc. wind ties for roof including securing bolts: posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riverting etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L rendering 15mm thick in CM 1:4 on fair/unfair faces of brick work or concrete surfaces finished fair & even without using extra cement complete all as specified and directed

SIDDAHANT ENTERPRISES

BALI ENTERPRISES

Manminder Singh and Co