REPAIR / PAINTING OF STEEL ALMIRAH, STEEL LOCKERS, STEEL TABLES, BED HARD (MAP), CHARPOY IP RECTANGULAR AT AFS JODHPUR.

Amount

REPAIR OF CHAIR VARANDAH :-FD-256/259/359

M & L for removing broken/ unserviceable cane from both seat & back of Chair Varandah and Recanning the same with best quality plastic cane 5mm wide and 0.60 mm thick of approved make after cleaning throughly all the surfaces of chair including required welding work for broken frame whereever required and redusting and applying two coat of synthetic enamel paint white colour over a coat of red oxide primer of approved make and providing suitable hard rubber shoes 4 Nos approved quality for each chair and all as specified and as directed by Engr-in-charge.Make:Asian/Jonson/ Berger/Nilson

REPAIR OF CHARPOY GI PIPE FD-220

Removing old unserviceable nylon newar from charpoy GI pipe and S & F 12mm thick BWR Gde plywood commercial type of size 1980x900mm to charpoy GI pipe frame by providing 03 Nos of flat Iron at equal distance size 40mm wide X 6mm thick and length shall be provided by existing charpoy GI and flat Iron shall be fixedt tightly to Chapoy GI with the help of suitable nut,bolt & washer of size 62-65 mm & 6 mm dia by drilling holes into GI Pipe alongwith any welding if required . The plywood shall be fixed on the charpoy by drilling 16 Nos holes (03 Nos on each long rail, 2 Nos on each Short rail & 2 nos on each iron flat) & fixing with nut bolt along with suitable washers of size 62-65mm and 6mm thick and all as specified and directed by Engr-in-Charge .Make of Plywood :- Greenply/Kitply/Century ply.

M&L for removing unserviceable three way elbow 32 mm dia and S & F new three way elbow 32 mm dia medium grade (ISI marked) and all as shown on drg.

M&L for removing unserviceable check nuts of 32 mm dia and S & F new check nuts 32mm dia 6mm thick of best quality and all as shown on drg.

M&L for removing the threadless/broken long rails from charpoy GI Pipe 32 mm dia and supply and fix new long rail made of 32 mm dia GI Pipe medium grade 1.88 mtr long threaded at both ends and fix to existing three way elbow 32 mm dia and all as shown on drg.(GI pipe Make: TATA/Jindal/Prakesh).

Taking out existing old broken short rail from Charpoy GI 32mm dia and providing in position 2 Nos short rails made out of old broken long rail obtained from taking down above item No. 5.04 ncluding threading on both ends complete fixing all as specified and shown on drg. ( Note : U/s check nuts to be replaced in above item & measured and paid as supply only under relevent item).

Taking out existing old broken legs from Charpoy GI 32mm dia and providing in 1 Nos new legs in position made out of old broken short rails obtained from taking down above item No. 5.05 and S&F 3mm thick 40mm dia MS plate welded at bottom of leg and including threading on top portion end complete all as specified and directed by Engr -in- Charge.

M&L for removing the old unserviceable Nylon Newar from charpoy GI Pipe 32 mm dia and Supply & reweaving with white colour new nylon newar 50 to 55mm wide closely double knitted and complete all as specified and directed by Engr -in- Charge. (Weight of nylon newar shall not be less than 1.50 Kgs per charpoy). Make of Nylon Newar shall be of KONARK/USHA/ DCM/ MANGALDEEP/STAR

M & L Welding to the dislocated iron flats of charpoy GI pipe earlier converted to Plywood top to the long / short rails

M & L removing old unserviceable plywood /MDF board top from the Charpoy GI pipe and S & F with new 12mm thick BWR Gde plywood commercial type of size 1980x900mm and all as directed by Engr-in-Charge . Make of plywood :- Greenply/Kitply/Century ply.

ALMIRAH LARGE STEEL WITH SHELVES, ALMIRAH STEEL 1/2 HANGING 1/2 SHELVES( FD-1031 & 1033)

Removing UNSV shelves from almirah Large steel & S & F new shelves made out of 1mm thick plain sheet fixed with appropriate clamps/screws/ nuts & bolts complete all as specified and directed by Engr -in- Charge

Removing UNSV locks from almirah & S & F new 6 levers locks, Godrej pattern (Make-HARRISON/GODREJ/LINK or Equivalent), with duplicate and key & hole cover and all as specified and directed by Engr -in- Charge.

Removing UNSV handle & S & F new steel anodized handles Godrej pattern with suitable bolts and all as specified and directed by Engr-in-Charge. Make-GODREJ/HARRISON or Equivalent

Removing UNSV locking assembly & S & F new locking assembly with cover complete all as specified and directed by Engr -in-Charge.

Removing UNSV hanging rod & S & F new hanging rod 20 mm dia , 16 Guage thick made of stainless steel conduit pipe with sockets complete all as specified and directed by Engineer-in-Charge.

M & L for denting & painting of Almirah large steel both internally and externally with synthetic enameled paint of silver/ grey colour with spray gun after properly smoothening the steel surface with the help of Sand paper/ electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge. Make of Paint:-Berger/Asian paint/Jonson and Nicholson Paints.

ALMIRAH MEDIUM STEEL W/SHELVES : FD-1032

Removing UNSV shelves from almirah Medium steel & S & F new shelves made out of 1mm thick plain sheet fixed with appropriate clamps/screws/ nuts bolts complete all as specified and directed by Engr -in- Charge

Removing UNSV locks from almirah & S & F new 6 levers locks, Godrej pattern (Make-HARRISON/GODREJ/LINK or Equivalent), with duplicate and key & hole cover and all as specified and directed by Engr -in- Charge.

Removing UNSV handle & S & F new steel anodized handles Godrej pattern with suitable bolts and all as specified and directed by Engr-in-Charge. Make-GODREJ/HARRISON or Equivalent

Removing UNSV locking assembly & S & F new locking assembly with cover complete all as specified and directed by Engr -in-Charge.

M & L for denting & painting of Almirah Medium steel both internally and externally with synthetic enameled paint of silver/ grey colour with spray gun after properly smoothening the steel surface with the help of Sand paper/ electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge. Make of Paint:-Berger/Asian paint/Jonson and Nicholson Paints.

Repair of Bed Hard (MAP)

M & L for removing old underviceable Ply wood top from Bed hard (MAP) and S & F new plywood top 12mm thick BWR Gde type 'AA' of size 1900x850mm with suitable nut & bolt and all as specified and directed by Engr-in-Charge Make of plywood -Greenply/Kitply/Century ply or Equivalent

M&L for removing old unserviceable particle board from head board and foot board of Bed hard (MAP) and S&F new 18mm thick boath side laminated particle board exterior grade of size 640x200mm for head board & 640x310mm for foot board fixing with suitable steel screw and all as specified and directed by Engr-in-Charge Make of plywood -CENTURYPLY/ACTION TESA/BHUTAN BOARD

M &L for preparation of steel surfaces by emery papers to Bed Hard (MAP) and applying one coat of synthetic enamel paint black colour apporved make and all as specified and as directed by Engr-in-Charge. Make of paint - Berger/Asian/Johnson

M & L for welding to the broken long rail stiffiner and leg stiffiner existing Bed Hard (MAP) with suitable welding rod all as specified and directed by Engr-in-Charge.

REPAIR OF CHARPOY IP RECTANGULAR WITH PLYTOP:-

M & L for removing old underviceable Ply wood top from Charpoy Iron Pipe Rectangular and S & F new plywood top 12mm thick BWR Gde type 'AA' of size 1940x850mm with suitable nut & bolt and all as specified and directed by Engr-in-Charge Make of plywood -Greenply/Kitply/Century ply

M &L for preparation of steel surfaces by emery papers to charpoy Iron Pipe rectangular and applying one coat of synthetic enamel paint black colour apporved make and all as specified and as directed by Engr-in-Charge. Make of paint - Berger/Asian/Johnson

M & L for welding to the broken long rail stiffiner and leg stiffiner existing charpoy Iron Pipe Rectangular with suitable welding rod all as specified and directed by Engr-in-Charge.

LOCKER BED SIDE STEEL

M & L for denting & painting of locker bed steel both internally and externally with synthetic enamled paint of silver/grey colour with spray gun after properly smoothiening the steel surface with the help of sand paper/electric grinder applying putty on dents and providing a coat coat of complete all as specified and directed by Engr-in-Charge . make of Paint Berger/Asian/Jonson

Removing UNSV & S&F hasp & staples 75mm long as per drg complete all as specified and directed by Engr-in-Charge

Removing UNSV & S&F MS steel CP handles 100mm as per drg complete all as specified and directed

Removing UNSV & S&F stainless steel conduit pipe 20 mm dia as a hanging rod 16 guage thick as per drg complete as specifed and directed,

Removing UNSV & S&F new shelves made out of 1mm thick plain sheet allas per drg complete as specified and directed.

TABLE OFFICE CLERK STEEL : FD-1004 & 84

Removing UNSV top & S&F new top made out of prelaminated particle board 18mm thick exterior gde (Centuryply/Action Tesa/Bhutan Board) as approved shade and 6mm thick first class teakwood edging fixed with all around the top & edging polishing with matching the colour of top complete all as specified and directed by Engr-in-Charge.

Removing UNSV & S&F new drawers made out of 1mm thick plain sheet shape and size all as per drg complete as specifed and directed, by Engr.in.Charge.

Removing UNSV locks from & S & F new 6 levers locks, Godrej pattern (Make-HARRISON/GODREJ/LINK), with duplicate and key & hole cover and all as specified and directed by Engr -in- Charge.

M & L for denting & painting of Table office clk steel to external surfaces and drawer & drawer cabinet to external & internal surfaces with synthetic enameled paint of silver/ grey colour with spray gun after properly smoothening the steel surface with the help of Sand paper/ electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge. Make of Paint:-Berger/Asian paint/Jonson and Nicholson Paints.

Removing UNSV & S&F best quality hard rubber shoes to legs complete all as specified and directed by Engineer-in-Charge.

TABLE OFFICE OFFICER STEEL : FD-1003 & 84

Removing UNSV top & S&F new top made out of prelaminated particle board 18mm thick exterior gde (Centuryply/Action Tesa/Eco Board) as approved shade and 6mm thick first class teakwood edging fixed with all around the top & edging polishing with matching the colour of top complete all as specified and directed by Engr-in-Charge.

Removing UNSV & S&F new drawers made out of 1mm thick plain sheet shape and size all as per drg complete as specifed and directed, by Engr.in.Charge.

Removing UNSV locks from & S & F new 6 levers locks, Godrej pattern (Make-HARRISON/GODREJ/LINK), with duplicate and key & hole cover and all as specified and directed by Engr -in- Charge.

M & L for denting & painting of Table office clk steel to external surfaces and drawer & drawer cabinet to external & internal surfaces with synthetic enameled paint of silver/ grey colour with spray gun after properly smoothening the steel surface with the help of Sand paper/ electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge. Make of Paint:-Berger/Asian paint/Jonson and Nicholson Paints.

Removing UNSV & S&F best quality hard rubber shoes to legs complete all as specified and directed by Engineer-in-Charge.

Repair of Chair CB Steel with Arms : FD-75(M)

M & L for removing unserviceable seat from chair CB steel with arms and S & F new seat made out of 2nd class hard wood and canned with 2mm to 2.50mm wide and 0.4mm thick plastic cane white colour and 4mm wide 0.6mm thick plastic cane for all round the border including black polishing to the wooden frame and fixing to the same with 4 Nos GI Nut and bolts of size 3/16"X3" long with two washers on either side of the seat, and all as specified and as directed by Engr-in-Charge.

M & L for removing unserviceable back from chair CB steel with arms and S & F new back made out of 2nd class hard wood and canned with 2mm to 2.5mm wide and 0.4mm thick plastic cane white colour and 4mm wide 0.6mm thick plastic cane for all round the border including black polishing to the wooden frame and fixing to the same with 4 Nos GI Nut and bolts of size 3/16"X3" long with two washers on either side of the back, and all as specified and as directed by Engr-in-Charge.

M & L for removing unserviceable/broken arms from chair CB steel with arms and S & F new arms made out of first class teak wood and handle shall be black polished and fixed to the chairs CB steel with arms with suitable wooden screws, and all as specified and as directed by Engr-in-Charge.

M & L for preparation of steel surfaces by emery paper to Chair CB steel with arms and applying one coat of synthetic enamel paint olive green/smoke gray shade approved quality over a coat of red oxide primer and all as shown on Drg. And as directed by Engr-in-Charge.

BHARAT BUILDERS

Vinayak Distributors

PRAFUL ENTERPRISES

shekhar & company

VISHWAS ENTERPRISES