Kerala

AOC

Works

Civil Works - Buildings

DEPOSIT-WORK-Urgent wok for the E-office implementation for Taluk Office,North Paravur. -Maintenance and repair works- General Civil Work

Public Works Department

north paravur | Ernakulam, Kerala

Amount: ₹5.5 LCloses: 13 May 2025Closed

Timeline

Published3 May 2025
Closed13 May 2025
Awarded13 Nov 2025

Bids

Item Rate

2 Bids13 Nov 2025

#	Company	Amount	Rank	Status
1	VIVEK.R L1₹5.7 LAccepted-AOC	₹5.7 L	L1	Accepted-AOC L1
2	Shihab.N.P Pwd Contractor L2₹6.6 L+₹82,180.01 (14.3%)Rejected-AOC	₹6.6 L+₹82,180.01 (14.3%)	L2	Rejected-AOC L2

BoQ Comparative

Line Items (12)

Sl No	Description	Qty	Unit	Shihab.N.P Pwd Contractor L2	VIVEK.R L1
1.00Taluk office Hall
1.00	15.7.4:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar	1.89	cum	2,000 ₹3,776	1,816.71 ₹3,429.95 Lowest
1.00	50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete	8.69	cum	8,500 ₹73,822.5	7,334.06 ₹63,696.31 Lowest
1.00	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	94.4	sqm	350 ₹33,040	329.82 ₹31,135.01 Lowest
1.00	13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer	94.4	sqm	100 ₹9,440	74.19 ₹7,003.54 Lowest
1.00	13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work	94.4	sqm	200 ₹18,880	159 ₹15,009.6 Lowest
1.01	50.12.4.1:Providing and fixing false ceiling with 7.5 mm thick PVC plain panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete (aluminium frame work shall be paid separately)	93.3	sqm	900 ₹83,971.8	746.25 ₹69,626.62 Lowest
1.01	21.5:Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ).	102.86	kg	920 ₹94,629.36	829.1 ₹85,279.57 Lowest
1.01	21.17:Providing and fixing anodised aluminium grill ( anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.(Only weight of grill to be measured for payment ).	41.26	kg	800 ₹33,008.8	642.54 ₹26,511.84 Lowest
1.01	21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)	156.61	kg	700 ₹1,09,625.6	563.94 ₹88,317.52 Lowest

Tender Value

₹5.5 L

EMD Value

₹13,642

Closing Date

13 May 2025, 2:00 pmClosed

Tender Inviting Organisation

Name

The Executive Engineer

Address

PWD Buildings Division Ernakulam

Work Description

The work proposed for renovating trussed roof terrace area of North Paravur Taluk office to a Hall

Tender Information

Tender ID

2025_PWD_758779_2

Reference Number

PWD/BLDG/TR/954/2022_5_1_1/1

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Item Rate

Period of Work

90 days

Location

north paravur

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

11 documents required · 11 mandatory

Fee/PreQual/Technical/Finance

Required1. Duly Filled BOQ (.xls)

Required2. Self attested Copy of valid registration certificate in Kerala PWD CPWD or other approved agencie (.pdf)

Required3. Duly filled and signed copy of bid submission letter as per item no1 Part VI of bid document (.pdf)

Required4. Duly filled and signed copy of prelim. Agt. in plain paper as per item no 2 Part VI of bid doc (.pdf)

Required5. Duly filled and signed copy of Integrity Pact Certificate as per item no 3 Part VI of bid documen (.pdf)

Required6. Duly filled, signed copy of Affidavit in plain paper as per no 4 Part VI (.pdf)

Required7. Duly filled and signed copy of requisition for e-payment form as per item no.6 Part VI of bid doc (.pdf)

Required8. EMD exemption certificate if any (.pdf)

Required9. GST Registration (.pdf)

Required10. Complete set of biddocument with NIT and sections from 1 to VII digitally signed (.pdf)

Required11. Any other relevant information with testimonials (.pdf)

Fee & Financial Details

Tender Fee Amount

₹1,205

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹13,642

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

13 Nov 2025

Published

3 May 2025

Bid Opening

15 May 2025

Download Starts

3 May 2025

Download Ends

13 May 2025

Submission Starts

3 May 2025

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.04 MB

Technical Evaluation

tech_eval.pdf

PDF

Financial Evaluation

fin_eval.pdf

PDF

Award of Contract

aoc.pdf

PDF

Bid Opening Summary

finance_1242458.pdf

PDF

boq_comp_chart.xlsx

xlsx

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

VIVEK.R

L1₹5.7 LAccepted-AOC

Shihab.N.P Pwd Contractor

L2₹6.6 L+₹82,180.01 (14.3%)Rejected-AOC

Sl No	Description	Qty	Unit	Shihab.N.P Pwd Contractor L2	VIVEK.R L1
1.00Taluk office Hall
1.00	15.7.4:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar	1.89	cum	2,000 ₹3,776	1,816.71 ₹3,429.95 Lowest
1.00	50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete	8.69	cum	8,500 ₹73,822.5	7,334.06 ₹63,696.31 Lowest
1.00	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	94.4	sqm	350 ₹33,040	329.82 ₹31,135.01 Lowest
1.00	13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer	94.4	sqm	100 ₹9,440	74.19 ₹7,003.54 Lowest
1.00	13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work	94.4	sqm	200 ₹18,880	159 ₹15,009.6 Lowest
1.01	50.12.4.1:Providing and fixing false ceiling with 7.5 mm thick PVC plain panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete (aluminium frame work shall be paid separately)	93.3	sqm	900 ₹83,971.8	746.25 ₹69,626.62 Lowest
1.01	21.5:Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ).	102.86	kg	920 ₹94,629.36	829.1 ₹85,279.57 Lowest
1.01	21.17:Providing and fixing anodised aluminium grill ( anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.(Only weight of grill to be measured for payment ).	41.26	kg	800 ₹33,008.8	642.54 ₹26,511.84 Lowest
1.01	21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)	156.61	kg	700 ₹1,09,625.6	563.94 ₹88,317.52 Lowest

Sl No

Description

Qty

Unit

Shihab.N.P Pwd Contractor

VIVEK.R

1.00Taluk office Hall

1.00

15.7.4:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

1.89

cum

2,000

₹3,776

1,816.71

₹3,429.95

Lowest

1.00

50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete

8.69

cum

8,500

₹73,822.5

7,334.06

₹63,696.31

Lowest

1.00

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

94.4

sqm

350

₹33,040

329.82

₹31,135.01

Lowest

1.00

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

94.4

sqm

100

₹9,440

74.19

₹7,003.54

Lowest

1.00

13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

94.4

sqm

200

₹18,880

159

₹15,009.6

Lowest

1.01

50.12.4.1:Providing and fixing false ceiling with 7.5 mm thick PVC plain panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete (aluminium frame work shall be paid separately)

93.3

sqm

900

₹83,971.8

746.25

₹69,626.62

Lowest

1.01

21.5:Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ).

102.86

920

₹94,629.36

829.1

₹85,279.57

Lowest

1.01

21.17:Providing and fixing anodised aluminium grill ( anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.(Only weight of grill to be measured for payment ).

41.26

800

₹33,008.8

642.54

₹26,511.84

Lowest

1.01

21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

156.61

700

₹1,09,625.6

563.94

₹88,317.52

Lowest