Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.9 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | Rejected-Technical | - | Rejected-Technical L3 | |
| 3 | Rejected-Technical | - | Rejected-Technical L2 |
| Sl No | Description | Qty | Unit | SIBICHAN THOMAS L2 | AJIMS P UMMAR L3 | TINTUMON T L1 |
|---|---|---|---|---|---|---|
| 1.00DWS | ||||||
| 1.00 | 18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | 5,000 | Litre | 11.28 ₹56,400 | 12.15 ₹60,750 | 11.15 ₹55,750 Lowest |
| 1.00 | OD60296/2026-2027:Providing and fixing a 3-phase panel board, including the Distribution Board (DB) unit, fuse unit, capacitor, earth rod, copper wiring, and all other necessary electrical fittings for the existing pump and starter located in the pump house | 1 | no | 17,266.17 ₹17,266.17 | 18,585.76 ₹18,585.76 | 17,061.73 ₹17,061.73 Lowest |
| 1.00 | OD277538/2025-2026:Supply and fixing pump Starter with Control panel for 2 hp mortor pump set including all cost of conveyance labour etc complete | 1 | no | 8,772.54 ₹8,772.54 | 9,443 ₹9,443 | 8,668.67 ₹8,668.67 Lowest |
| 1.00 | OD276504/2025-2026:Supplying and fixing 40mm dia 10 kg/cm2 HDPE pipe PE- 80 including specials and all fitting
charges but excluding trenching and refilling etc. complete | 310 | per metre | 187.31 ₹58,066.1 | 201.63 ₹62,505.3 | 185.1 ₹57,381 Lowest |
| 1.00 | OD276501/2025-2026:1.003-Specification code: OD79803/2025-2026
Supplying and fixing centralised distribution system with gi pipe holder and PVC Ball vcalve ,
barell nipple 15 mm with all fitting and accessories | 20 | no | 675.96 ₹13,519.2 | 727.63 ₹14,552.6 | 667.96 ₹13,359.2 Lowest |
| 1.01 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 1.25 | cum | 334.17 ₹417.71 | 359.72 ₹449.65 | 330.22 ₹412.78 Lowest |
| 1.01 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | 0.2 | cum | 7,369.65 ₹1,473.93 | 7,932.89 ₹1,586.58 | 7,282.39 ₹1,456.48 Lowest |
| 1.01 | 50.6.1.4:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete | 0.45 | cum | 5,999.21 ₹2,699.64 | 6,457.71 ₹2,905.97 | 5,928.18 ₹2,667.68 Lowest |
| 1.01 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.15 | cum | 8,580.21 ₹1,287.03 | 9,235.97 ₹1,385.4 | 8,478.62 ₹1,271.79 Lowest |
Tender Value
₹2.0 L
EMD Value
₹5,108
Closing Date
27 Jun 2026, 11:00 amClosed
AE LIDEW Section KAttappana Municipality
O/O AE LIDEW Section KAttappana Municipality
GGENERAL-Annual Plan-Kattappana Municipality 2025-26 Vettiyankalpadi Drinking Water Project,Ward 26 (304/26)-CFC (TIED) Rs.250000/--General Civil Work
2026_LSGD_856689_2
05/2026/AE/LIDEW/KTPMCP/I PHASE
Open Tender
Civil Works - Water Works
Item Rate
180 days
Kattappana
Please refer Tender documents.
7 documents required · 7 mandatory
₹555
Yes
₹5,108
Yes
15 Oct 2026
20 Jun 2026
27 Jun 2026
20 Jun 2026
27 Jun 2026
20 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1DWS | |||||
| 1.001 | 18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | - | Litre | - | - |
| 1.002 | OD60296/2026-2027:Providing and fixing a 3-phase panel board, including the Distribution Board (DB) unit, fuse unit, capacitor, earth rod, copper wiring, and all other necessary electrical fittings for the existing pump and starter located in the pump house | - | no | - | - |
| 1.003 | OD277538/2025-2026:Supply and fixing pump Starter with Control panel for 2 hp mortor pump set including all cost of conveyance labour etc complete | - | no | - | - |
| 1.004 | OD276504/2025-2026:Supplying and fixing 40mm dia 10 kg/cm2 HDPE pipe PE- 80 including specials and all fitting
charges but excluding trenching and refilling etc. complete | - | per metre | - | - |
| 1.005 | OD276501/2025-2026:1.003-Specification code: OD79803/2025-2026
Supplying and fixing centralised distribution system with gi pipe holder and PVC Ball vcalve ,
barell nipple 15 mm with all fitting and accessories | - | no | - | - |
| 1.006 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | - | cum | - | - |
| 1.007 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | 1 | cum | - | - |
| 1.008 | 50.6.1.4:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete | - | cum | - | - |
| 1.009 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | - | cum | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.08 MB
BOQ_1448028.xls
BOQ • 0.31 MB
304sbd.pdf
Tender Documents • 1.66 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .