Fire Fighting System

Name of Work :: Providing and Fixing Fire Fighting System and Other Miscellaneous Works at Sub Registar office, Nadiad Taluka,

District Kheda.

Bill of Quantities (BOQ)

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[1] Fire Fighting Fire Pump Room & Accessories Supplying, 1.00 No 2,62,600.00

Installation, Testing and commissioning of Electric driven Main

Fire Hydrant pump suitable for automatic operation and

consisting of following: Horizontal type, centrifugal End Suction

pump of cast iron body & bronze impeller , mechanical seal to

ensure a minimum pressure of 3.5 kg / sq.cm. at highest and

farthest outlet at specified flow of 137m3/Hour@ 70M. head with

M.S.fabricated common base plate, coupling, coupling guard,

foundation bolts etc. as required

[2] Supplying, Installation, Testing and commissioning of Jockey Pump 1.00 No 1,06,050.00

10.8M3/hour @70M Head.Horizontal Centrifugal End Suction.

with M.S.fabricated common base plate, coupling, coupling guard,

foundation bolts etc. as required

[3] Supplying, Installation, Testing and commissioning of cubical type 1.00 No 1,14,130.00

floor mounted power cum Fire Pump control panel complete with

suitable switch gear, bus bars, relays, contractors, indicating

lamps, fuses, instruments manual isolator & auxillary switch

including connections complete as required.(Contractor should

submit GA Drawing for approval before deliver the Panel at Site)

[4] Providing, fixing, testing and commissioning below Caballing work 20.00 Rmt 287.85

for Fire Pumps (Only from Panel to Pumps) 3 C X 35 Sqmm

Alluminium Armoured

[5] Providing, fixing, testing and commissioning below Caballing work 20.00 Rmt 181.80

for Fire Pumps (Only from Panel to Pumps) 3 C X 16 Sqmm

Alluminium Armoured

[6] Providing, fixing, testing and commissioning below Caballing work 70.00 Rmt 111.10

for Fire Pumps (Only from Panel to Pumps) 2 C X 1.5 Sqmm

Copper Armoured.

[7] Providing, fixing, testing and commissioning below Caballing work 10.00 Rmt 353.50

for Fire Pumps (Only from Panel to Pumps) Perforated G.I.sheet

cable tray Cable Tray . 300X300X50mm .

[8] Providing, fixing, testing and commissioning below Caballing work 10.00 Rmt 247.45

for Fire Pumps (Only from Panel to Pumps) Perforated G.I.sheet

cable tray Cable Tray . 150X150X50mm .

[9] Cutting hole by Mechanical Means of upto 200 mm dia in 10.00 No 676.70

slab/beam throughout the thickness

[10] Providing, fixing, testing & commissioning of Glicerin Filled dial 3.00 No 1,353.40

type Pressure Gauge and range of 0-15 Kg/cm2

[11] Providing, fixing, testing & commissioning of Pressure Switches for 2.00 No 1,020.10

automation of fire pumps. Pressure switches shall be double pole

single throw type suitable for 3 phase supply with diaphragm.

Aluminum Enclosure with IP 66 protection as required..

[12] Supplying, Installation, Testing and commissioning of C.I.Butterfly 3.00 No 5,151.00

valve conforming to I.S:13095 class PN 16 rating with Fittings,

Flanges, Nutbolts, Washers, Gaskets etc.of size: 150mm dia.

[13] Supplying, Installation, Testing and commissioning of C.I.Butterfly 3.00 No 3,817.80

valve conforming to I.S:13095 class PN 16 rating with Fittings,

Flanges, Nutbolts, Washers, Gaskets etc.of size: 100mm dia

[14] Supplying, Installation, Testing and commissioning of C.I.Butterfly 1.00 No 3,181.50

valve conforming to I.S:13095 class PN 16 rating with Fittings,

Flanges, Nutbolts, Washers, Gaskets etc.of size: 80mm dia.

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[15] Supplying, Installation, Testing and commissioning of C.I.Butterfly 2.00 No 3,726.90

valve conforming to I.S:13095 class PN 16 rating with Fittings,

Flanges, Nutbolts, Washers, Gaskets etc.of size: 50mm dia.

[16] Providing, fixing, testing and commissioning of C.I. Dual plate type 3.00 No 7,383.10

Non-Return Valve class PN 16 rating with fittings, flanges,

nutbolts, washers, gaskets etc.of sizes: 150mm dia

[17] Providing, fixing, testing and commissioning of C.I. Dual plate type 2.00 No 4,327.85

Non-Return Valve class PN 16 rating with fittings, flanges,

nutbolts, washers, gaskets etc.of sizes: 80mm dia

[18] Providing, fixing, testing and commissioning of C.I. Dual plate type 2.00 No 2,969.40

Non-Return Valve class PN 16 rating with fittings, flanges,

nutbolts, washers, gaskets etc.of sizes: 50mm dia

[19] Supply, Installation, Testing and Commissioning of S.S. Ball Valves 3.00 No 1,272.60

with all fittings required. 25mm dia.

[20] Supply, Installation, Testing and Commissioning of S.S. Ball Valves 5.00 No 1,187.76

with all fittings required. 15mm dia.

[21] Providing, fixing, testing and commissioning of Above Ground MS. 60.00 Rmt 2,110.90

ERW Black C Class Heavyduty pipes as per IS: 1239 (upto 150 mm

dia.) and IS: 3589 (upto 200 mm dia. And above) including cutting,

screwing, welding etc. and providing all fittings like flanges, bends,

tees, elbows, reducers, clamps, hangers etc. with painting of one

coat of primer and 2 or more coats of synthetic enamel paint of

approved make / shade complete as per specification. 150mm dia

[22] Providing, fixing, testing and commissioning of Above Ground MS. 48.00 Rmt 1,424.10

ERW Black C Class Heavyduty pipes as per IS: 1239 (upto 150 mm

dia.) and IS: 3589 (upto 200 mm dia. And above) including cutting,

screwing, welding etc. and providing all fittings like flanges, bends,

tees, elbows, reducers, clamps, hangers etc. with painting of one

coat of primer and 2 or more coats of synthetic enamel paint of

approved make / shade complete as per specification. 100mm dia

[23] Providing, fixing, testing and commissioning of Above Ground MS. 12.00 Rmt 1,010.00

ERW Black C Class Heavyduty pipes as per IS: 1239 (upto 150 mm

dia.) and IS: 3589 (upto 200 mm dia. And above) including cutting,

screwing, welding etc. and providing all fittings like flanges, bends,

tees, elbows, reducers, clamps, hangers etc. with painting of one

coat of primer and 2 or more coats of synthetic enamel paint of

approved make / shade complete as per specification. 80mm dia

[24] Providing, fixing, testing and commissioning of Above Ground MS. 6.00 Rmt 626.20

ERW Black C Class Heavyduty pipes as per IS: 1239 (upto 150 mm

dia.) and IS: 3589 (upto 200 mm dia. And above) including cutting,

screwing, welding etc. and providing all fittings like flanges, bends,

tees, elbows, reducers, clamps, hangers etc. with painting of one

coat of primer and 2 or more coats of synthetic enamel paint of

approved make / shade complete as per specification. 50mm dia

[25] Providing, fixing, testing and commissioning of Above Ground MS. 6.00 Rmt 303.00

ERW Black C Class Heavyduty pipes as per IS: 1239 (upto 150 mm

dia.) and IS: 3589 (upto 200 mm dia. And above) including cutting,

screwing, welding etc. and providing all fittings like flanges, bends,

tees, elbows, reducers, clamps, hangers etc. with painting of one

coat of primer and 2 or more coats of synthetic enamel paint of

approved make / shade complete as per specification. 25mm dia.

[26] Supplying, installing and commissioning of Foot Valve 1.00 No 15,695.40

with,suitable flanges, nuts, bolts, gaskets etc. complete. 150mm

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[27] Supplying, installing and commissioning of Foot Valve 1.00 No 10,524.20

with,suitable flanges, nuts, bolts, gaskets etc. complete. 80mm dia

[28] Providing, fixing, testing and commissioning of C.I. Dual plate type 1.00 No 6,060.00

Non-Return Valve class PN 10 rating with fittings, flanges,

nutbolts, washers, gaskets etc.of sizes: 100mm dia

[29] Fire Fighting Equipement Providing, fixing, testing and 3.00 No 5,252.00

commissioning of SS Single Headed Oblique Pattern Hydrant

Landing Valves as per IS: 5290 with 80 mm dia flanged inlet &

mm dia female outlet complete with cap and chain etc.

[30] Providing, fixing, testing and commissioning of SS Branch Pipe 3.00 No 1,696.80

with nozzle of 25 mm nominal bore outlet suitable to fit with

standard instanteneous type 63 mm dia coupling. As per IS:903

[31] Providing, fixing, testing and commissioning of 63 mm dia 15m 6.00 No 3,989.50

long RRL Hose Pipe with 63 mm dia.Type A Male and female

Stainless Steel couplings duly binded with GI wire, rivets etc.

conforming to IS 636 as required.

[32] Providing, fixing, testing and commissioning of weather proof 3.00 No 3,646.10

standard fire Hose Cabinet wall mounting type 18 Guage. (750 x

600 x 250) having Double Opening with M.S. fabricated stand,

necessary locking arrangement by allan key.

[33] Providing, fixing, testing and commissioning of Wall mounting Fix 2.00 No 5,938.80

type First aid Fire Hose Reel with drum, hanging bracket, 36 M x

25 mm dia high pressure hose reel tubing as per IS:884 with shut

nozzle and ball valve and all required accessories.

[34] Providing, fixing, testing and commissioning of CI Four way Fire 1.00 No 12,301.80

Brigade Inlet as per IS: 904 having 63 mm dia inlet with 150 mm

dia Butterfly valve blank cap and chain with necessary fittings,

flanges, nutbolts etc. (For System filling & Tank Filling)

[35] Providing, fixing, testing and commissioning of Two Way Fire 1.00 No 13,473.40

Brigade Inlet for Draw Out Connection with 100mm dia Foot

Valve. blank cap and chain with necessary fittings, flanges,

nutbolts etc. (Make: Shah Bhogilal/Safex/Winco)

[36] Providing, fixing, testing and commissioning of 25 mm dia Air 2.00 No 1,353.40

Release Valve and Ball Valve assembly on top of each riser for Air

release system.

[37] On - Off Pump Trigger System. Providing, fixing, testing and 2.00 No 424.20

commissioning of On -Off Switch.

[38] Providing, fixing, testing and commissioning of 3 Core X 1.5 Sqmm 50.00 Rmt 84.84

flexible Cable with PVC Condiut.

[39] Providing, fixing, testing and commissioning of below Auto Glow 5.00 No 169.68

Signages. Emergency Exit 4” X 12”

[40] Providing, fixing, testing and commissioning of below Auto Glow 10.00 No 339.36

Signages. Fire Fighting Equipements .8” X 12”

[41] Providing, fixing, testing and commissioning of below Auto Glow 10.00 No 169.68

Signages. Fire Extinguisher 4” X 12”

[42] Providing and fixing of convention Below Ceiling smoke detector 14.00 No 3,131.00

complete with mounting base as required.

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[43] Providing and fixing of conventional manual call point 2.00 No 3,817.80

[44] Providing and fixing of conventional horn cum strobe 2.00 No 3,817.80

[45] SITC Of Addressable Fire Alarm Panel 1.00 No 80,598.00

[46] Providing and fixing of 2x1.5 sqmm fire alarm armoured 250.00 Rmt 101.00

cable, 600/1000V rated with annealed copper conductor

having XLPE insulation, steel wire armouring &FRLS outer sheath

complete as required

[47] APPROVAL FIRE SYSTEM FROM LOCAL FIRE AUTHORITY Getting of 1.00 Job 1,47,460.00

Fire Fighting System Approval from local fire authority with all

other charges and documentations for getting No Objection

Twelve Lakh Sixty Seven Thousand Three Hundred Seventy Eight Rupees and Thirty Paisa Only

I/We am/are willing to carry out the work at…………………………………………….% above/below percent (Should be written in figures and words)

of the estimated rate mentioned above. Amount of my / our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct…………………………% below Add…………………………% Above

In Worlds In Worlds

(* Please strike out whichever is not applicable).

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which

no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design

the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate

mentioned in all the tender.

5. Credit of dismantled materials of amount of Rs. 0.00/- must be recovered from contractor's 1st R.A. bill.

6. All duties, taxes, and other levies except GST payable by the contractor under the contract, or for any other cause shall be

included in the rates, prices and total Bid Price submitted by the Bidder. (GST will be paid extra)

Dated Signature of Deputy Executive Engineer Executive Engineer

the Contractor. R & B Sub-Division, R & B Division,