COMPREHENSIVE MAINT AND REPAIR OF INTERNAL E AND M SERVICES EXTERNAL ELECTRICAL SUPPLY EXTERNAL WATER SUPPLY DGSET AT SATELLITE AREA UNDER GE NW KOCHI

Amount

Taking down old u/s or defective cable, Supply and laying in trenches / floor or fixed to walls / ceiling and testing XLPE Insulated, Screened, PVC bedded, Galvanized steel strip or wire armoured, Electric power cables (heavy duty) 1100 Volts grade AC with stranded Aluminium conductor of size 95Sqmm 3.5 Core complete all as specified and as directed

All as per Item No.1 above but 120Sqmm 3.5 Core

All as per Item No.1 above but 150Sqmm 3.5 Core

All as per Item No.1 above but 185Sqmm 3.5 Core

All as per Item No.1 above but 240Sqmm 3.5 Core

All as per Item No.1 above but 300Sqmm 3.5 Core

All as per Item No.1 above but 400Sqmm 3.5 Core

All as per Item No.1 above but 11KV/6300Volts grade, cross sectional area 120 Sqmm, 3 core

Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 Mtr depth and getting out in Soft / Loose soil / PCC floor for laying of UG cables, pipes etc all as directed.

Supply and spread dry river sand for cushioning and covering of UG cables in trenches all as specified and directed. Note:- only punned thickness shall be measured and paid.

Supply and lay one layer of new sub class 'B' bricks for protection of cable laid flat butting to each other complete. Note: While laying, the length of the brick shall be at right angle to the central axis of cable.

Returning, filling in including spreading, levelling watering and wall ramming in layers not exc 25cm thick in soil all as directed.

Removal of excavated soil to a distance not exc 50 mtrs and depositing where directed at a level not exc 1.5 mtr above the starting point all as directed.

Supply and lay GI tubing light grade with all fittings 40mm bore for protection of UG cables under roads / culverts / floor or fixed on walls / poles etc. all as specified and as directed.

All as per Item No.14 above but 50mm bore.

All as per Item No.14 above but 80mm bore.

All as per Item No.14 above but 100mm bore.

M&L for indoor cable end terminal joint for XLPE HT 11KV UG earthed cable with stranded Aluminium conductor (including Joint kit), heat shrinkable epoxy type, suitable for 300Sqmm 3core, all as specified and directed. Make: M-Seal / Rachem / Denson

M&L for outdoor cable end terminal joint for XLPE HT 11KV UG earthed cable with stranded Aluminium conductor (including Joint kit), heat shrinkable epoxy type, suitable for 300Sqmm 3core, all as specified and directed. Make: M-Seal / Rachem / Denson

M&L for outdoor straight through cable joint for XLPE HT 11KV UG cable with stranded Aluminium conductor (including Joint kit), heat shrinkable epoxy type, suitable for 300Sqmm 3core, all as specified and directed. Make: M-Seal / Rachem / Denson

M&L for outdoor straight through cable joint for XLPE LT UG 1100V cable with stranded Aluminium conductor (including Joint kit), heat shrinkable epoxy type, suitable for 95Sqmm 3.5core, all as specified and directed. Make: M-Seal / Rachem / Denson

All as per Item No.21 above but 120Sqmm 3.5 Core

All as per Item No.21 above but 150Sqmm 3.5 Core

All as per Item No.21 above but 185Sqmm 3.5 Core

All as per Item No.21 above but 240Sqmm 3.5 Core

All as per Item No.21 above but 300Sqmm 3.5 Core

All as per Item No.21 above but 400Sqmm 3.5 Core

Taking down old u/s MCCB, Supply, Fix and Connecting using Cable Lugs, Testing and commissioning 3 pole MCCB 40Amp, 50 Hz, 415 V, AC with rupturing capacity 18KA with Thermal - Magnetic Release.

All as per Item No.28 above but 3 Pole MCCB 63Amp

All as per Item No.28 above but 3 Pole MCCB 100Amp

All as per Item No.28 above but 3 Pole MCCB 63A 35KA .

All as per Item No.28 above but 3 Pole MCCB 80Amp

All as per Item No.28 above but 3 Pole MCCB 100Amp

All as per Item No.28 above but 3 pole MCCB 160Amps

All as per Item No.28 above but 3 Pole MCCB 200Amp

Taking down old u/s MCCB, Supply, Fix, Connecting, Testing and commissioning 4 Pole MCCB 63 Amp, 50 Hz, 415 V with rupturing capacity 35KA with Thermal - Magnetic Release incl spreader terminals.

All as per Item No.36 above but 100 Amp 36KA with Thermal - Magnetic Release.

All as per Item No.36 above but 125 Amp 36KA with Thermal - Magnetic Release.

All as per Item No.36 above but 160 Amp 36KA with Thermal - Magnetic Release.

All as per Item No.36 above but 200 Amp 36KA with Thermal - Magnetic Release.

All as per Item No.36 above but 250 Amp 36KA with Thermal - Magnetic Release.

All as per Item No.36 above but 320 Amp 36KA with Thermal - Magnetic Release.

All as per Item No.36 above but 400 Amp 36KA with Thermal - Magnetic Release.

All as per Item No.36 above but 630 Amp 36KA with Thermal - Magnetic Release.

Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (Earth pit not less than 2.25Mtr deep below ground level) with top edge of earth plate 1.5M deep below normal ground level connected to GI earth strip 32x6mm by means of bolts, nuts,check nuts and washers of galvanised iron or steel incl necessry excavation, earth work in any type of soil, 1:3:6 type C1 PCC chamber, RCC chamber cover, watering pipe, funnel etc all as shown in electrical plate No 3 of SSR part I connected to earthing test point all as indicated including testing on completion.

M&L Earth continuity conductor or main earthing lead 25x3mm aluminium strip fixed to wall including GI nuts, bolts and washers complete all as directed.

All as per Item No.28 above but Voltmeter

All as per Item No.28 above but VAF + PF Meters

Taking proper HT Electric supply shutdown from KSEB and periodical servicing / maintenance to RMU installed at Dharambir Enclave, Dawson Vihar, Varsha Apartments Opening up, Inspecting the ABB RMU by OEM service Engineer for necessary periodical check, conditioning / adjustments to the loading springs, programming the micro procssor unit as per recorded load status etc. Lubricating the moving parts of the RMU unit, Cleaning the contact Tips, removal of carbon particles using cleaning agents etc.,Assembling back the RMU, Restoring the HT Electric supply from KSEB Girinagar Section, thorough checking for the functionability of RMU all as directed.

S&F in repairs dry cell 1.5 V, AAA. Make : Eveready

M&L for Structural steel work using rolled mild steel section of Fe-290 (Gde E-165) like Angles, flat, square / round bars as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. all as directed.

M&L for preparation of old painted steel and iron surfaces of any description such as LT Panel board / meter boxes etc area exc 10cm in width or girth with one coat of anti rust Aluminium paint all as specified and as directed.

Material and labour for removing the grass / vegetation etc complete from sorroundings of E/M installation , leveling the area, supply and spread or loose filling with stone aggregate of gauge 40 to 80mm, ramming / consolidation in layers,all as directed.

M&L for carrying out transformer oil filtration (at site) in different locations of satellite area by providing and using on load stream line type filter machine of suitable capacity to improve the break down value of voltage (BDV) not less than 45 KV (r m s) including demoisturising the oil / equipment by heating up to the required level to achieve the standard Di-electric strength of transformer oil all as directed.

Supply and filling transformer oil with desired di-electric strength and BDV not less than 45KV, for topping up / replacing the oil in transformers at various locations of satellite area.

Material and labour for maint and repairs to step down transformer 11KV / 415V of any make or model installed at various locations of satellite area after proper shut down of electric supplly and duly disconnecting the HT/LT cable, earth strips etc from the transformer. Dismantle and remove top cover with oil conservator tank, Explosion vent, Buchholz relay etc. for detecting the leakages and repairing it by welding (if required), disconnect and remove internal HT / LT copper strip connectors, lifting up the transformer core using tripod / Chain pulley, draining out complete oil from the transformer tank to suitable clean containers, removing all deposits like carbon or oil silt / sediments, replacing complete rubber or leather gaskets and neoprene washers, re assembling the transformer, toping up with new transformer oil to required level and carrying out oil filtration using stream line type filter machine (Transformer oil, other spares, gaskets and filteration will be measured and paid seperately) to bring the desired parameters of BDV, connecting, testing and commissioning all as specified and directed for 500KVA transformer of Varsha, Tarangini, Dawson or Panampilly Nagar

All as per Item No.58 above but 300 KVA transformer of Panampilly Nagar

S&F in repairs Transformer HT bush rod made out of brass of suitable length and dia (same as existing) with brass check nuts and washers all as specified and directed for 500 KVA of Varsha, Tarangini, Dawson & Panampily Nagar

All as per Item No.60 above but 300 KVA transformer of Panampilly Nagar

Supply and replace in repairs Transformer LT bush rod made out of brass of suitable length and dia (equivalent to original) with brass check nuts and washers all as specified and directed for 500KVA transformer of Varsha, Tarangini, Dawson or Panampilly Nagar

All as per Item No.62 above but 300 KVA transformer of Panampilly Nagar

Supply and replace in repairs Transformer HT 11KV bush insulator (equivalent to original) with leather / rubber gaskets all as specified and directed for 500KVA transformer of Varsha, Tarangini, Dawson or Panampilly Nagar

All as per Item No.64 above but 300 KVA transformer of Panampilly Nagar

Supply and replace in repairs Transformer LT 440V bush insulator (equivalent to original) with leather / rubber gaskets all as specified and directed for 500KVA transformer of Varsha, Tarangini, Dawson or Panampilly Nagar

All as per Item No.66 above but 300 KVA transformer of Panampilly Nagar

Supply and replace in repairs Silica gel filled air breather, fibre body (clear view type) with gasket all as specified and directed for 500KVA transformer of Varsha, Tarangini, Dawson or Panampilly Nagar

All as per Item No.68 above but 300 KVA transformer of Panampilly Nagar

S&F in repairs including connecting stem type thermometer suitable for Transformers of any capacity / type / model all as directed.

Preparing the surface by scraping the existing painting, cleaning, filling the cavities and applying one coat of spray painting with synthetic enamel paint (colour as approved by GE) including writing the SM / MES Nos. all as specified & directed for 500KVA transformer of Varsha, Tarangini, Dawson or Panampilly Nagar

All as per Item No.71above but 300 KVA transformer of Panampilly Nagar

Supply only Power capacitor heavy duty of capacity 5 KVAR, 440V. Make : L&T / Epcos or equivalent.

All as per Item No.74 above but 10 KVAR capacity

Supply only capacitor duty contactor suitable for 50 KVAR APFC panel. Make : L&T / Epcos or equivalent.

Supply only 5 step APFC Relay suitable for 50 KVAR APFC panel. Make : L&T / Epcos or equivalent.

Supply only HRC Fuse unit suitable for 50 KVAR APFC panel. Make : L&T / Epcos or equivalent.

M&L for air termination single pointed Aluminium rod 12 mm dia and 300 mm long incl taking down old u/s one all as directed.

M&L for steel water tubing medium grade 40 mm bore fixed at roof in PCC foundation along with necessary fixing arrangement for installing air termination rod incl taking down old u/s all as directed.

Refixing of aluminium strip of any size as existing in the site including procelain insulation with necessary screws and washers etc all as directed.

M&L for aluminium strip 25 x 3.00 mm with saddle and fixing screws etc. for roof conductors and down conductors above ground incl taking down old u/s one all as directed.

M&L for test point terminal block made of gun metal or phosphorus, bronze size; 75 x 75 x 25 mm drilled and screwed Including 3 Nos 8 mm dia 25 mm long hex head screws all as specified.

S&F PVC junction box all as specified and directed. Make: Sintex, Cat No. GSJB 2014 or equivalent model of Henzel

M&L for sub main wiring with 2 runs of 6 Sqmm PVC insulated unsheathed multistranded single core copper conductor FRLS, ISI marked cable drawn in and including ISI Marked, medium grade, non metallic, Fire Resistant PVC conduit and all accessories, with 1 run of 6 Sqmm PVC insulated unsheathed multistranded single core copper conductor FRLS, ISI marked cable as earth continuity wire and making good disturbed surfaces etc. all as specified including taking old wiring. Note:- Three run of cable and one run of PVC conduit shall be measured as one unit.

Supply and fix PVC / FRP enclosure, SPN DB, 240V, AC, 2 way, single door. Make: Henzel / Havells / IndoAsian / Legrand

S&F MCB SPN 10A, AC, 240V, 10KA. Make: Henzel / Havells / IndoAsian / Legrand

S&F RCCB, 3 Phase, 4 pole, 63 Amps, 30 mA complete all as specified and as directed.

S&F RCCB, double pole, 30 mA, 40 Amps complete all as specified and as directed.

Design, Fabrication, Installation, Commissioning and Testing of Outdoor type LT Panel, Weather & Vermin Proof made of 3mm thick CRCA MS sheet, totally enclosed type, Factory made, both side opening with hinged doors and lacking arrangements, fixed on angle iron frame built with 40x40x6mm of suitable height, with rubber gaskets, Earthing connection facility with IP-65 protection and anticorrosive powder coated of gray colour paint incl taking out old panel board and removing to store yard, with the following :-

Repairs to HT metering unit as under : - (a)Taking down unsv/ burned out HT CT indoor from the metering system by obtain the proper shut down from KSEB with due precautions. (3 Nos) (b)Taking down the unsv/ burned out HT potential transformer with due precautions including proper shut down from KSEB ©S&F current transformer 11 KV, 15 / 5A, Burden power - 10 VA class of accuracy - 0.2 S, 4 wire system (03Nos). Make : Elpower (d)S&F Potential Transformer 11 KVA/ 110 V, Burden power - 25 VA, Class of Accuracy - 0.2 S, HSV 12 KV, ILV 28 KV, Phase/ Frequency 3 Ph 50Hz, 3 Phase 4 wire system (01 unit) Make : Elpower (e)M&L for testing HT, CT - 03 Nos and HT PT 1 No in the TMR laboratory of KSEB, Angamaly and to obtain the test certificate. The rate includes the testing fees towards KSEB, transportation and other expenses (Note : While refixing the CT and PT, the reading shall be taken in presence of TMR Angamaly Staff.) (f)Replacement of worn out nuts, bolts and washers with existing type and size GI nuts, bolts & washers

Repairs to HT metering unit as under : - (a)Taking down unsv/ burned out HT CT indoor / outdoor type from the metering system by obtain the proper shut down from KSEB with due precautions. (3 Nos) of any type and make and capacity. (b)Taking down the unsv/ burned out HT indoor/ outdoor type potential transformer with due precautions including proper shut down from KSEB of any type make and capacity. ©S&F current transformer 11 KV, Burden power , class of accuracy - 0.2 S, 4 wire system (03Nos) of make as per existing type, size & capacity. (d)S&F Potential Transformer 11 KVA, Burden power - 25 VA, Class of Accuracy - 0.2 S, HSV 12 KV, ILV 28 KV, Phase/ Frequency 3 Ph 50Hz, 3 Phase 4 wire system (01 unit) of make as per existing type, size & capacity. (e)M&L for testing HT, CT - 03 Nos and HT PT 1 No in the TMR laboratory of KSEB, Angamaly and to obtain the test certificate. The rate includes the testing fees towards KSEB, transportation and other expenses (Note : While refixing the CT and PT, the reading shall be taken in presence of TMR Angamaly Staff.) (f) Replacement of worn out nuts, bolts and washers with existing type and size GI nuts, bolts & washers

Maintenance, servicing and repair of DG set with panel boards including removal/replacement of defective parts and sundry item viz grease, lubricant oil, cotton waste, small pieces of cable lugs and other parts(all consumables) costing less than Rs 500/ for DG set 60 KVA (Engine:- Ashok Leyland and Alternator :- KEL) at fernson apartment

All as per item No. 93 above but for DG set of capacity 100 KVA (Engine:- Ashok Leyland and Alternator :- Stem Ford) at Tarangini Apartment.

All as per item No. 93 above but for DG set 160 KVA (Engine:- Ashok Leyland and Alternator :- KEL) at Varsha apartment.

All as per item No. 93 above but for DG set of capacity 225 KVA (Engine:- Kirloskar cummins and Alternator :-KEL) at DERA Complex Note for item No. 93 to 96:- (a) Spare parts other than those included in the above items required for replacement shall be measured and paid under Sch 'A' Part II (b) comprehensive maintenance of above mentioned DG sets should be done by OEM authorized agency . (c ) The contractor shall be attended the defect / breakdown immediately on case basis . (d) The technician employed should be trained / certified and shall be approved by the GE.

S&F in repairs Lub oil pressure transducer in 60/100 KVA DG set .

S&F in repairs Lub oil pressure transducer in 125/160 KVA DG set.

S&F in repairs Lub oil pressure transducer in 225 KVA DG set .

S&F in repairs Low lub oil pressure safety in 60/100 KVA DG set .

S&F in repairs Low lub oil pressure safety in 125/160 KVA DG set .

S&F in repairs Low lub oil pressure safety in 225 KVA DG set .

S&F in repairs High water temperature trip safety in 60/100 KVA DG set.

S&F in repairs High water temperature trip safety in 125/160 KVA DG set .

S&F in repairs High water temperature trip safety in 225 KVA DG set .

S&F in repairs Harness wiring in 60/100 KVA DG set .

S&F in repairs Harness wiring in 125/160 KVA DG set

S&F in repairs Harness wiring in 225 KVA DG set .

S&F in repairs Shutdown valve in 60/100 KVA DG set .

S&F in repairs Shutdown valve in 125/160 KVA DG set.

S&F in repairs Shutdown valve in 225 KVA DG set .

S&F in repairs Magnetic pick up in 60/100 KVA DG set.

S&F in repairs Magnetic pick up in 125/160 KVA DG set .

S&F in repairs Magnetic pick up in 225 KVA DG set .

S&F in repairs Engine speed control switch for low / raise function in 60/100 KVA DG set .

S&F in repairs Engine speed control switch for low / raise function in 125/160 KVA DG set .

S&F in repairs Engine speed control switch for low / raise function in 225 KVA DG set.

S&F in repairs AVR unit in 60/100 KVA DG set .

S&F in repairs AVR unit in 125/160 KVA DG set all as directed .

S&F in repairs AVR unit in 225 KVA DG set all as directed .

S&F in repairs Rotating rectifier assembly in 60/100 KVA DG set all as directed .

S&F in repairs Rotating rectifier assembly in 125/160 KVA DG set all as directed .

S&F in repairs Rotating rectifier assembly in 225 KVA DG set all as directed .

S&F in repairs Air filter assembly in 60/100 KVA DG set all as directed .

S&F in repairs Air filter assembly in 125/160 KVA DG set all as directed .

S&F in repairs Air filter assembly in 225 KVA DG set all as directed .

S&F in repairs Asbestos rope 12 mm dia

S&F in repairs water pump in 60/100 KVA DG set all as directed .

S&F in repairs water pump in 125/160 KVA DG set all as directed .

S&F in repairs water pump in 225 KVA DG set all as directed .

S&F in repairs fan belt in 60/100 KVA DG set all as directed .

S&F in repairs fan belt in 125/160 KVA DG set all as directed .

S&F in repairs fan belt in 225 KVA DG set all as directed .

S&F in repairs Governor speed control in 60/100 KVA DG set all as directed .

S&F in repairs Governor speed control in 125/160 KVA DG set all as directed .

S&F in repairs Governor speed control in 225 KVA DG set all as directed .

S&F in repairs carbon brush set with holder

S&F in repairs Solenoid switch assembly with bush

S&F in repairs commutator unit

S&F in repairs stator starting coil unit complete

S&F in repairs stator running coil unit complete

S&F in repairs Lub oil hoses set for 60 KVA / 100 KVA / 125 KVA / 160/ 225 .

S&F in repairs Alternator terminal connector for 60 KVA / 100 KVA / 125 KVA / 160/ 225 .

Supply and refill Engine oil

Supply and refill Coolant

S&F in repairs Primary & secondary fuel filter for DG Set 60/100/160/225KVA

S&F in repairs Oil filter suitable for DG Set 60/100/160/225KVA

Repairs to radiator by taking out by disconnecting from DG set locating the leaking places, soldering / brazing complete in cleanibg with acid and refixing in position complete all as direcetd incl replacement of hoses with new one for DG set of capacity 60 KVA / 100 KVA / 125 KVA / 160/ 225 KVA

M&L for taking down stator assembly of alternator by disconnecting electrically and mechanically complete cleaning with CTC and decarbonising the stator , rotor and excitor coils, heating the coils for achieving insulation upto the mark, checking throughly the complete system and connections, replacing the defective insulation paper and applying Dr Beck varnish baking / heating and bringing back to installatin, refixing and assembling, connecting electrically and mechanically and testing on completion of work complete all as directed for DG set of capacity 60/100/125/160 KVA

All as per item no.149 but for 225 KVA

M&L for replacement of sealed maintenance free generator starting system battery 20 AH 24 Volt suitable to DG capacity 50 KVA to 140 KVA equivalent to 2x12 volt 88 AH flooded battery with SMPS charger (self starting facility) having 24 month warranty including initial factory charging all as specified and as directed. Make:- Cummins/Bosch

All as per item no above 54 but battery 32 AH 24 Volt suitable to DG capacity 160 KVA to 500 KVA equivalent to 2x12 volt 150 AH/180 AH . Make:- Cummins/Bosch

Painting of existing DG set complete including inside and enclosure of Engine/Alternator of DG set 225 KVA of approved colour by Engr-in-Charge.

Painting of SM/MES on DG Sets with white colour enamel paint including date of installation all as specified and directed.

M&L for E-oil leak arresting from gasket between cylinder block and oil sump by replace the gasket and complete in all respect for 60/100/125/160 KVA DG set all as specified and directed.

All as per item no.155 above but for 225 KVA DG set.

M&L for dismantling existing broken pole of any type and size from any existing position including all connection all as specified and as directed.

S&F in repairs GI bracket for street light fitting made out of 40mm dia GI pipe bend to shape 1.5m long with new clamps nut and bolts complete duly painted.

S&F Galvanised Octagonal pole 7 meters long including one meter single arm bracket with base plate and , finial taper plug, bolts, nuts & screws incl RCC foundation as per manufacturer's drawing complete all as specified & directed by the Engineer-in-Charge. Make- Bajaj/Crompton Greves

S&F in repairs Cable Junction Box with terminal IP66 "Halogen free and weather proof" with metric knockouts for cable entry incl. suitable clamps, nuts, bolts, washers duly painted complete. Make- Hensel/ Syntex

S&F in repairs LED driver suitable for existing street lights/ security lights of 40 watt to 90 watt of any make and type.

S&F in repairs LED driver suitable for existing flood light of 40 to 100 watt any make and type.

S&F in repairs LED driver suitable for existing post of lantern/ gate light of 40 watt of any make and type.

M&L for disconnection and lowering existing high mast light by using rope with the help of electrical motor for necessary repair/servicing ,greasing of winges ,servicing/minor repairs of gear boxes and motors etc and refixing at existing position including all connection all as specified and as directed.

Supply and fix in repairs MCB SPN 6 to 32 Amps.

M&L for removing defective service cable , supply and laying or fixing on wall or passing through pipe 1100 volts grade PVC insulated multi stranded aluminium conductor heavy duty cable ISI marked served with inner sheathing of PVC tape armored with galvanized steel wire or tape and overall PVC sheathed in service connections for cable of size 4 sqmm 2 core. Make : Havells/Finolex/Polycab

All as per item No 166 here-in before but cable of size 6 sqmm 2 core

All as per item No 166 here-in before but cable of size10 sqmm 2 core

All as per item No 166 here-in before but cable of size 10 sqmm 4 core

All as per item No 166 here-in before but cable of size 16 sqmm 4 core

S&F in repairs LED flood light of 100 watt including all connection all as specified and as directed. Make :- Bajaj Cat Part No. PRAZE F 120L WH NB-A5 TG SD or equivalent model of other approved manufactureres

S&F in repairs LED flood light of 50 watt including all connection all as specified and as directed. Make:- Bajaj Cat Part No. BJFL 50W LED I or equivalent model of other approved manufactureres

S&F in repairs LED street light fittings system 90W ,230 V, 50 Hz ,lumen output 10800 lm ,aluminium pressure die cast housing ,toughened glass with silicon gaskets for IP66 protection,complete assembly with LEDs,driver and accessories pre wired up to terminal block including all connection all as specified and as directed. Make: Bajaj Cat Part No. ENXT P 108L WH CR TG SD or equivalent model of other approved manufactureres

All as per item No. 173 above but for 45 Watt. Make :- Bajaj Cat Part No. ENXT P 54L WH CR PC SD or equivalent model of other approved manufactureres

S&F in repairs LED aviation obstruction light including fixing arrangement and connecting complete all as directed. Make:- Bajaj cat no. BGAV 302 LED or equivalent model of other approved manufactureres

S&F in repair, Isolator 4 pole 40 Amps, 415 volts, ISI marked all as specifiedand as directed. Make- Havells/L&T/Schnider

All as per item No 176 here-in-beofre but Isolator 4 pole 63 Amp 415 volts

All as per item No 176 here-in-beofre but Isolator DP 40 Amp 240 volts

All as per item No 176 here-in-beofre but Isolator DP 63 Amp 240 volts

S&F in repair MCCB, FP, 63 A, 18 KA, 415 volts including connecting using cable terminals, commissioning, testing complete.

S&F in repair MCCB, FP, 40 A, 16 KA, 415 volts including connecting using cable terminals, commissioning, testing complete.

S&F in repair, Analog Time Switch, 3 phase (with battery back up), 24 hours program, back up of 100 hrs, current capacity 16A, complete. Make- Havells/ Indo Asian/ L&T

S&F in repair Power contactor 3 pole, 18A, 230 V complete. Make- L&T/ C&S/ Indo Asian

S&F in repair Power contactor 3 pole, 25A, 230 V complete. Make- L&T/ C&S/ Indo Asian

S&F in replacement LED gate light (post of latren) 40 Watt with driver and complete fixing on the place directed by Engr-in-Charge all as specified and as directed. Make:- Bajaj Cat Part No. BGCTNP 40W LED WH/WW or equivalent model of other approved manufactureres

Taking down carefully existing unserviceable copper/ aluminium point wiring (light, fan, socket or power point etc) complete with fittings/fixtures such as switches sockets, ceiling rose, fan regulators, etc removing materials for taking credit and making good disturbed surface of wall, floors, etc complete.

Material and labour for point wiring with 1. 5 Sqmm PVC insulated (FRLS) sheathed multistranded single core copper conductor cable in and including PVC casing capping of suitable size including 2mm thick MS sheet pressed terminal box (recessed) with 3mm thick laminated hylam top cover or PVC moulded switch boards of suitable size including 1.5 Sqmm PVC insulated (FR) multistranded copper conductor earth continuity wire for one light/fan point controlled by one 5A switch all as specified and as directed by the Engineer-in-Charge. Note : Red/yellow/blue coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. for one light/fan/bell point controlled by one switch.

All as per item No.187 here-in-before but for one pin 5 A socket outlet same board

All as per item No.187 here-in-before but for one pin 5 A socket outlet independent point

All as per item No.187 here-in-before but with 2.5 Sqmm cable for one 15A switch socket on independent board .

All as per item No.187 here-in-before but with 4 Sqmm cable for one AC point

S&F switch piano flush type 5 Amps SP 230 Volts all as specified and directed.

S&F ceiling rose surface bakelite 65 x 50 mm 3 terminals

S&F socket outlet 2 in 1 3 pin 5 and 15 Amps flush type all as directed

S&F switch piano flush type single pole one way 15 Amps all as directed

S&F Socket outlet 2 in 1, 3 pin, 5Amps all as specified and directed.

S&F fan regulator suitable capacity electronic type 230 V step type. for accommodating along with switch & socket board.

S&F in repairs switch piano flush type 5 Amps 2 Way all as specified and directed.

S&F in repairs Bell push, flush type 5 Amps all as specified and directed.

S&F in repairs switch 6A One way SP modualr type all as specified and directed.

S&F in repairs Moduler socket shuttered 6A, 5 Pin combined 2 module all as specified and directed.

S&F in repairs switch 16 A one way SP modular type all as specified and directed.

S&F in repairs Moduler socket shuttered 6/16 A 6 Pin combined 3 module all as specified and directed.

S&F in repairs Modular bell push flush type single pole 5Amp all as specified and directed.

S&F in repairs Switch Modular type 6 Amps single pole 2 way all as specified and directed.

S&F in repairs electronic step type moduler fan regulator, AC 230 Volt, 120W all as specified and directed.

S&F in repairs Call Bell, AC, 240V, SP, ISI Marked and as specified.

S&F in repairs switch piano flush type 5 Amps one way all as specified and as directed.

S&F in repairs switch piano flush type 16 Amps one way all as specified and as directed.

S&F in repairs socket 5 pin 5 Amps all as specified and as directed.

S&F in repairs of socket 2 in one 3/5 pin and 15 Amps flush type all as specified and as directed.

S&F in repairs of switch socket combination flush type 5 pin 5 Amps one way all as specified and directed.

S&F in repairs of switch socket combination flush type 5 pin 15 Amps one way all as specified and directed.

S&F in repairs lamp holder PVC / Polycarbonate type with backplate for batten fittings / angular fittings all as specified and as directed.

Supply and fixing sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp capacity complete all as specified and directed.

S&F in repairs lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings, AC, 240V, Pin type, ISI marked and as specified and directed by Engineer-in-Charge.

S&F in repairs Regal Batten for LED tube lights, both side connection type and LED tube rod 1 x 20 Watt, both side connection all as specified and as directed. Make:- Havells Cat Part No. REGALBATTENT8 upto 1x822W SSBSWH for Regal Batten & CRYSTAL 1213T8DSTL20W LED 8655 GLASS for tube rod or equivalent model of other approved manufactureres.

S&F in replacment LED tube light both side connection type 1X20 W all as specified and directed. Make:- Havells Cat Part No. CRYSTAL 1213T8DSTL20W LED 8655 GLASS or equivalent model of other approved manufactureres.

S&F in replacment Suspended LED luminaire 1x40 W incl suspention wire, batten pre wired complete including taking down old un servicable light fittings all as specified and as directed by Engineer-in-Charge. Make:- Havells Cat No CONSTA 1144LP40WLED840 SPCWH or Philips, Crompton & WIPRO

Supply and fix in replacment LED Mirror light fitting with 10 watts, 2KVsurge protection, including suitble clamps, screws etc including taking down old un servicable light fittings all as specified and as directed by Engineer-in-Charge. Make:- Crompton Cat part no. LDL-10-CDL or equivalent model of other approved manufactureres.

S&F in replacment decorative wall light fixture made up of poly carbonate suitable upto 15 Watt LED bulb including taking out existing light fitting of any type and make. Make:- Havells CITY3 Cat Part No. LHDLO6160099 or equivalent model of other approved manufactureres.

Supply and fix in replacment in existing holder, 9W LED Bulb with B22 base, clear acrylic diffuser, Self declaring R No, power factor .90, 85 lumens light output all as specified. Make:- Luker Cat Part No. LBGB09CL or equivalent model of other approved manufactureres.

S&F in replacment LED surface type ceiling light 10 Watt with defuser and driver complete including taking out old light fittings all as specified and directed. Make Luker IP65 ECO CEILING LIGHT Cat Part No. LCL10R or equivalent model of other approved manufactureres.

M&L for submain wiring with 2 runs of 4 Sqmm PVC insulated unsheathered multi standrard copper conductor cable and one run of 4 Sqmm cable as earth continuity wire in and including PVC casing caping or surface PVC conduit and making good -the disturbed surface to match with exisitng surface all as specified. Note :- (i) Three runs of 4 Sqmm PVC cable and one run of PVC casing caping or surface PVC conduit shall be measured as one unit length.(ii) The wiring shall be done in proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads.

M&L for submain wiring with 2 runs of 6 Sqmm PVC insulated unsheathered multi standrard copper conductor cable and one run of 6 Sqmm cable as earth continuity wire in and including PVC casing caping and making good -the disturbed surface to match with exisitng surface all as specified. Note:- (i) Three runs of 6 Sqmm PVC cable and one run of PVC conduit or PVC casing caping shall be measured as one unit length.(ii) The wiring shall be done in proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads.

M&L for submain wiring with 2 runs of 10Sqmm PVC insulated unsheathered multi standrard copper conductor cable and one run of 10 Sqmm cable as earth continuity wire in and including PVC casing caping or surface PVC conduit and making good -the disturbed surface to match with exisitng surface all as specified. Note :- (i) Three runs of 10 Sqmm PVC cable and one run of PVC casing caping or surface PVC conduit will be measured as one unit length.(ii) The wiring shall be done in proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads.

M&L for submain wiring with 4 runs of 10Sqmm PVC insulated unsheathered multi standrard copper conductor cable and two runs of 10 Sqmm cable as earth continuity wire in and including PVC casing caping or surface PVC conduit and making good -the disturbed surface to match with exisitng surface all as specified. Note :- (i) six runs of 10 Sqmm PVC cable and one run of PVC casing caping or surface PVC conduit shall be measured as one unit length.(ii) The wiring shall be done in proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads.

Taking down unserviceable/damaged Sub main wiring any type any size including continuous earth wire, conduit/capping casing/concealed and making good disturbed surfaces of walls/ceiling matching with existing colour.

S&F in repairs sheet metal enclosure for MCB DB TPN 4 way, double door

S&F in repairs sheet metal enclosure for MCB DB TPN 8 way, double door

S&F in repairs sheet metal enclosure for MCB DB SPN 4 way, double door

S&F in repairs sheet metal enclosure for MCB DB SPN 8 way, double door

S&F in repairs MCB TPN DB, IP-43 protection, double door type, 8 way as MCCB incomer. Make:- L&T Cat Part No. DBVTH008DD or Legrand/ ABB

S&F MCB TPN 100 Amps, 415 Volts

S&F MCB TPN 63 Amps, 415 Volts

S&F MCB SPN 40A

S&F MCB SP 5 TO 40A

S&F Energy efficient ceiling fan of 1200mm sweep (3 star rated) 230 Volt 50 Hz with all electrical connection including taking down old unserviceable ceiling fan and depositing to MES Store yar. all as specified and as directed. Make :- Havells Cat Part No. ES-40 or Equivalent

Taking down existing ceiling fans of 1200 mm sweep of any make and removing to workshop for following repairs and refixing at same location/ other location as directed:- (a) Opening & Strip cutting the winding of ceiling fans and re-winding with super enamelled copper wire of suitable/ existing size, with sleeves, heating, baking etc. and re-assembling the same. (b) Replacement of Ball bearings of suitable size. (c) Replacement of fan capacitor of suitable capacity.

All as per item No.239 here-in-before but for exhaust fan 250 to 400 mm sweep

S&F Capacitor 2.5 mfd, 240V, AC, suitable for fans all as directed

S&F Capacitor 4.0 mfd, 240V, AC, suitable for fans all as directed

S&F in repair PVC body exhaust fans complete 200/250mm sweep on the same location or where as directed by Engr-in-Charge. Make: Havells Cat Part No. Ventil Air-DX white

S&F in repair motor assembly for PVC body Wall mounting fan of 400 mm sweep complete all as specified.

Supply and replacing breathing assembly of transformer with new silica gel suitable for any make of transformer of capacity 160 KVA. Make : Suvidha/Yogya or equivalent.

Supply and fill transformer oil having dielectric strength not less than 45 KV all as specified and directed

S&F CPVC pipe 25 mm dia SDR 11 complete with all fittings to walls, ceiling or in floors including taking down old unservicable pipes etc complete all as specified and as directed by Engineer-in-Charge.

S&F CPVC pipe 40 mm dia SDR 11 complete with all fittings to walls, ceiling or in floors including taking down old unservicable pipes etc complete all as specified and as directed by Engineer-in-Charge.

S&F CPVC pipe 50 mm dia SDR 11 complete with all fittings to walls, ceiling or in floors including taking down old unservicable pipes etc complete all as specified and as directed by Engineer-in-Charge.

S&F Power capacitor 2/3/5 KVAR heavy duty in existing capacitor bank including following after taking down old capacitor complete all as specified and as directed by Engineer-in-Charge. (Make : Havells, Epcos). (a) Backlite fuse of existing capacity. (b) Capacitor bank of 2/3/5 KVAR. (c) Replacement of existing MCB of various type with existing capacity.

S&F MCCB, FP, 63 A, 36 KA, 415 volts including connecting using cable terminals, commissioning, testing including taking down old MCCB complete all as specified and as directed by Engineer-in-Charge. Make: - L&T Cat Part No. DZ1F0063DXD1A or Schneider/ Legrand

S&F MCCB, FP, 100 A, 36 KA, 415 volts including connecting using cable terminals, commissioning, testing taking down old MCCB complete all as specified and as directed by Engineer-in-Charge. Make - L&T Cat Part No. DZ1F0100DXD1A or Schneider/ Legrand

S&F LED Indicators of Colour : Red / Yellow / Blue incl taking down old LED indicator complete all as specified and as directed by Engineer-in-Charge.

M&L for Preparing the old painted surfaces of pump set of capacity upto 5/3 HP 3phase including Suction Delivery Pipes, valves & metallic base channel complete by scrapping the old painting and removing the grease, oil, dirt etc and applying one coat of anti crrosive paint of approved colour with spray gun over a coat of auto primer for all as specified and directed by Engineer - in - Charge.

S&F LED Flood light fitting with 100 watts, IP65 protection, min 90 lumens per watt light output, 5KV external drive and 4kv internal drive Surge Protection, Power Factor 0.95, THD Less Than 10%. Potted driver with RoHs and CE Marking, Fitting comprises of unique peanut lens, Die cast Aluminium housing and Heat resistant Toughened Glass including suitable GI brackets with clamps, nuts, bolts etc including taking down old light fitting complete all as specified and as directed by Engineer-in-Charge. Make :- Havells, Cat part No. JETAIRISFL100WLED757ARWBLTG or Philips,Crompton,Luker Whipro&Bajaj

S&F LED Street light fitting with 150 watts, IP66 protection, min 100 lumens per watt light output, 5KV external drive and 4kv internal drive Surge Protection, Power Factor 0.95, THD Less Than 10%. Potted driver with RoHs and CE Marking, Fitting comprises of unique fitting arm tilting option, Die cast Aluminium housing and Heat resistant Toughened Glass including suitable bent pipe GI brackets with clamps, nuts, bolts etc including taking down old light fitting complete all as specified and as directed by Engineer-in-Charge. Make :- Havells, Cat part no. ENDURAPEARLMAGNUMSL150 W LED757PASYTOTGHO or Philips, Crompton,Luker Whipro&Bajaj

S&F LED Street Light/ Flood light/ Gate light/ Garden light driver suitable for 25 Watt to 100 Watt Street/Security/Flood Lights of any make and size of existing on ground all as specified and directed.

S&F Galvanised Octagonal pole 8 meters long with base plate, finial taper plug, bolts, nuts & screws incl RCC foundation as per manufacturer's drawing including taking down old unserviciable pole complete all as specified & directed by the Engineer-in-Charge. Make:- Crompton Greves or equivalent make approved by Garrison Engineer

Dismantling and removing the motor of the mono block / coupled Pump set from exiting position, shifting to workshop for the repair work,removing the burnt winding, cleaning rotor / stator, re-winding the motor with super enameled copper wire of size equivalent to the original winding including superior insulation packing materials, Varnishing, Drying etc and installing back to the original position, testing alignment with pump and commissioning on full load upto 5HP, 3phase, AC, 415 capacity of motor all as specified and directed by the Engineer - in -Charge.

All as per item No.261 here-in-before but for 3 HP motor

Dismantling and removing the mono block / Coupled pump set from the existing position, strip opening the pump set, removing the unserviceable ball bearing from the motor or pump side, supply and fix new ball bearing / roller of suitable size ( make :- SKF ) for pump set of capacity upto 5/3 HP, 3 phase, testing and commissioning on full load all as specified & directed by Engineer - in -Charge.

S&F Ball type foot valve (cast iron) 50 mm dia all as specified and as directed. Make- Normax or equivalent makeas approved by GE.

S&F DOL Starter MKL 1 for 5 HP Motor all as specified and directed. Make : L & T or equivalent make approved by Garrison Engineer.

S&F CHLORINE 65%-70% calcium based granular disinfectant for water treatment, paking in 45 kg plastic drums.

Material and Labour for scrubbing, cleaning etc thoroughly, the sewage sump comprising of primary sump capacity 9.60 x 2.90 x 3.50 m and secondary sump 6.00 x 3.40 x 3.50 m by using pump set at site including removal of sludge, suspended solid particals, mud or any other deposits and cleaning throughly with fresh water including re-cleaning with bleaching powder solution and cleaning of the sump surroundings and disposal of sludge / silt obtained from sump using proper chemical dosing etc complete all as specified and as directed by Engineer -in-Charge. Two coats of white washing shall be carried out inside and outside of the sump carried out as specified. The sludge / silt obtained from cleaning shall be transported and diposed of at approved site of local bodies / local Govt authorities. Note :- Necessary approval for transporting and disposs of the above item from local bodies/ local Govt authorities will be obtained by the contractor with out any extra expenditure to the department .

Material and Labour for scrubbing, cleaning thoroughly RCC UG sumps of 50000 Lts (6.30x3.30x3.30 m) capacity and removal of sludge, bleaching, sediments, mud or any other deposits to a distance not exc 500 mtrs and re-cleaning with bleaching powder soltion and fresh water and applying two coats of white wash to inner and outer surfaces and one coat of enamel paint to steel ladder inside the sump and writing the words 'MILITARY ENGINEER SERVICES, TANK CAPACITY and DATE OF CLEANING" in capital letter of suitable height matching with the existing marking at outer wall with white enamel paint over black background all as specified and as directed by Engineer-in-Charge

All as per item No 268 here-in-before but 5000 ltrs capacity (1.80x1.90x1.80m)

Material and Labour for scrubbing, cleaning etc thoroughly PVC water tank 1000 to 3000 ltrs capacity kept on roof including removal of sludge, bleaching sediments, mud or any other deposits and writing the capacity of the water tank and date of cleaning with white enamel paint at Office Complex and Guest House of DAD Thevara all as specified and directed by Engineer-in-Charge.

All as per item No 270 here-in-before but 500 ltrs capacity service tank kept on roof top at residential accommodation of DAD Thevara. Note for item Nos 267 to 271 :- Under ground sump and service tanks shall be cleaned minimum twice during contract period or as directed by Engineer-in-Charge.

S&F PVC Top cover for 500 ltrs water tank including taking down old un servicable PVC top cover etc complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs Ball valves (PTMT) of size 20 mm dia high pressure, with Polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed all as specified and as directed.

Supply and fix in repairs Ball valves (PTMT) of size 25 mm dia high pressure, with Polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed all as specified and as directed.

Supply and fix in repairs Ball valves (PTMT) of size 40 mm dia high pressure, with Polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed all as specified and as directed.

Supply and hoisting HDPE three layer water storage tank capacity 500 Ltrs rotational moulded incl stagging at top of the roof of Bldg including taking down old un servicable water tank etc complete all as specified and as directed by Engineer-in-Charge. Make : Sintex or equivalent make approved by Garrison Engineer.

All as per item No 276 here-in-before but 1000 ltr capacity

S&F float valve brass body 15mm dia with plastic ball with threded inside of the ball etc complete including taking down old un servicable float valve all as specified and as directed by Engineer-in-Charge.

S&F float valve brass body 25mm dia with plastic ball with threded inside of the ball etc complete including taking down old un servicable float valve all as specified and as directed by Engineer-in-Charge.

St George Engineering Works