Repair to certain compound wall repairs oblique replacement of meter and misc E and M works at SAA under GE South Tezpur

Amount

Taking down cement plaster, of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water all as directed.

Material and labour for 15 mm thick rendering in cement mortar (1:4) on fair face of brick or concrete surface finished even and fair complete all as specified and directed.

M&L for preparation of new surfaces and appplying one coat of exterior emulsion paint over a thin layer (minimum 1mm layer )of putty and one priming coat of waterproofing coating primer as per manufacturer instruction and applied by approved applicator after preparation of newly plastered wall surface complete all as specified and directed.(Make:- Jotun India Pvt Ltd./ Appex Ultima (Asian Paints)/ Shalimar Paints Ltd (Extra Maxium Ultra) / Berger Paints Ltd (Wheather Coat) /Dulax/Royal Acrylic (Crimson Paints Pvt Ltd) .

Material and labour for complete removal of existing treatment appplying one coat of exterior emulsion paint over a thin layer (minimum 1mm layer )of putty and one priming coat of waterproofing coating primer as per manufacturer instruction and applied by approved applicator after preparation of newly plastered wall surface complete all as specified and directed.(Make:- Jotun India Pvt Ltd./ Appex Ultima (Asian Paints)/ Shalimar Paints Ltd (Extra Maxium Ultra) / Berger Paints Ltd (Wheather Coat) /Dulax/Royal Acrylic (Crimson Paints Pvt Ltd) .

Material and labour for preparation of old steel surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Material and labour for preparation of old steel surfaces of any description, not otherwise described n.exc10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

M&L for rewinding of ceiling fan,1200mm any make and any type of model, after taking burnt out old winding wire complete and cleaning the internal slots of rotor with ring and rewinding the ceiling fan with super enamelled copper winding wire of suitable SWG Varnishing, baking in oven and reassembling complete all as specified and directed

M&L for rewinding of ceiling fan,1400mm any make and any type of model, after taking burnt out old winding wire complete and cleaning the internal slots of rotor with ring and rewinding the ceiling fan with super enamelled copper winding wire of suitable SWG Varnishing, baking in oven and reassembling complete all as specified and directed

M&L for painting of fan (ceiling fan of ) any sweep with applying one coat of synthetic enamel paint (Ceiling Fan -White Paint and Exhaust fan - Gray Paint ) by spray machine including preparation of old painted surfaces with filling of cavity by filler with and including writting of MES No. of fan in capital letters with black synthetic enamel paint of height not less than 20mm on fan body in approved pattern complete all as specified and directed.

S & F Ball bearing (Bearing No- 6201/6202) of ceiling fan/Exhaust Fan of any make, any model and any sweep including taking down old unsv bearing complete all as specified and directed . Make : NBC/ SKF/ TATA

S & F Capacitor( 2.5-4) MFD for ceiling fan/Exhaust Fan of any make, any model and any sweep including taking down old unsv capacitor. Make- Havells/Usha/Tibcon/Universal

S & F Fan blade for Ceiling fan of 1200mm sweep of white colour including taking down old unsv fan blade complete all as specified and drected.

Taking down old Unsv DB of any type & any capacity complete all as specified and directed

S & F Factory made sheet metal enclosure for DBs double door (Fixed flush to the wall), SPN, 240 volt, 8 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s complete and all disturbed surfaces of wall shall be made good to match the existing wall finishes all as specified and directed .

S & F Factory made sheet metal enclosure for DBs double door (Fixed flush to the wall), SPN, 240 volt, 4 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s complete and all disturbed surfaces of wall shall be made good to match the existing wall finishes all as specified and directed.

S & F Power line vertical type TPN DB double door 4 way, IP 43 suitable for MCCB 100 amps CRCA sheet metal enclouser with detachable gland plates for flush / surface mounting with bus bar neutral link and Earth Bar in concealed and all disturbed surfaces of wall shall be made good to match the existing wall finishes complete all as specified and directed.

Taking down old unserviceable MCB/MCCB/RCBOs of any type & any capacity complete all as specified and directed

S & F MCB SP 6 to 32 Amp, B series , 230 Volts complete all as specified and directed .

S & F MCB DP 6 to 32 Amps, B series, 230 Volts complete all as specified and directed .

S & F MCB DP 40-63 Amps, B series, 230 Volts complete all as specified and directed.

S & F MCB TPN 40-63 Amps, B series, 10 KA "B" series 415 Volt complete all as specified and directed.

S & F MCCB 4 Pole 415V Fixed type 25-100A with breaking capicity 16 KA complete all as specified and directed.

Taking down the existing unserviceable wiring carefully of aluminium/copper point wiring (light, fan, bell, socket, power point etc.) with conduit/casing caping, along with all connected accessories complete all as directed.

M&L for point wiring complete for One light point with 1.5 Sqmm single core multistranded copper conductor FR PVC insulated and unsheathed cable 1100 volts grade ISI marked drawn through PVC casing caping including provn of 1.5 sqmm single core multistranded copper conductor FR PVC insulated and unsheathed as earth wire continuity including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required(as per the existing condition) complete all as specified and directed. wire Make- polycab/havells

Ditto as per Item No 24above but for one fan point

Ditto as per Item No 24 above but for One 3 pin 5 Amp socket outlet on the same board

Ditto as per Item No 24 above but for One 3 pin 5 Amps socket out let on independent board

Ditto as per Item No 24 above but with 2 x 2.5 Sqmm +1 x 2.5sqmm Copper conductor cable for one 3 pin, 15 Amps Switch socket out let on independent board.

Ditto as per Item No 24 above but for one bell point controlled by one 5 amp switch

Ditto as per Item No 24 above but for one light point controlled by two two way switches

S & F in repair electronic fan regulator,100W ,230V ,50Hz stepped socket type for ceiling fan complete all as specified .

S&F in repair switch piano type, 5 Amp. SP, one way complete all as specified and directed.

S&F in repair switch piano type, 15 Amp. SP, one way complete all as specified and directed.

S&F in repair switch socket outlet, 2 in one 5 pin, 5 Amp, piano type as directed/ specified.

S&F in repair switch socket combination 2 in 1, 6 pin 5 and 15 Amp flush type universal complete all as specified and directed.

S&F in repair switch bell push, flush type, 5 Amp complete all as specified and directed.

S & F Sheet metal Single pole and neutral enclosure , 240 Volt with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed.

S&F in repair bell, AC, 230 V, SP, ding dong type complete all as specified and directed.

S&F in repair of Ceiling rose 3 phase, PVC/ Polycarbonate body complete all as specified and directed.

S&F in repair switch two way switch flush type, 5 Amp complete all as specified and directed.

M&L in repair for PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep complete all as specified and directed.

M&L in repair for PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 175 mm x 100 mm and 50 mm deep complete all as specified and directed.

M&L in repair for PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 200 mm x 105 mm and 50 mm deep complete all as specified and directed.

M&L in repair for PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 250 mm x 200 mm and 50 mm deep complete all as specified and directed.

Taking down old unsv submain wiring of any size complete all as specified and directed

M&L for sub main wiring with two run of 4.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 2.5 Sq mm drawn through PVC conduit and all accessories,including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required(as per the existing condition), complete all as specified. Note: Copper conductor 2 run and one run of copper earth wire shall be measured as one length.

M&L for sub main wiring with two run of 6.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 4.0 Sq mm drawn through PVC conduit and all accessories,including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required(as per the existing condition), complete all as specified. Note: Copper conductor 2 run and one run of copper earth wire shall be measured as one length.

Supply and fixing single phase Electronic tamper proof energy meters with LCD display of 10-60A capacity 230V AC 50Hz ISI marked and celing the meter(Top & Bottom covers) with suitable lead wire and connecting up incomming and outgoing cable connetions to meter including taking down old unsv meter and taking to MES Store including earthing of meter including testing and commisioning complete.

Supply and fixing single phase Electronic tamper proof energy meters with LCD display of 5-30A capacity 230V AC 50Hz ISI marked and celing the meter(Top & Bottom covers) with suitable lead wire and connecting up incomming and outgoing cable connetions to meter including taking down old unsv meter and taking to MES Store including earthing of meter including testing and commisioning complete.

S& F ceiling fan of sweep not less than 1200mm, 5 star with hanger including taking down existing old unseviceable ceiling fan and taking to MES Store as specified and directed.

S& F Exhaust fan of sweep not less than 300mm with hanger including taking down existing old unseviceable ceiling fan and taking to MES Store as specified and directed.

Taking down old unsv LED lights of any wattage , any type including all its accessories complete all as specified and directed.

Supply and Fixing in repairs wall mounted LED batten, polycarbonate housing & integrated electronic driver. LED light fittings flicker free, instant start with uniform light distribution 20W 4 ft indoor decorative with 2 Core copper wire from ceiling rose to light fittings all as directed.

D G Corporation

M/s. M. G. Babloo Das

MD. LATIFUL AHMED HUSSAIN

Siddheswari Construction

M/S Deep-Jeet

M/s Borah Enterprise

Chinmay Traders