Supply, Fabrication, painting and erection of Regulator shutter Near Thiruvallam Parasurama Temple at Thiruvanathapuram Dist

Amount

Replacing the old damaged MS suction pipe line 200mm diameter with new GI pipe with its fittings and new strainer.

Cutting existing damaged 200 mm diameter MS Suction pipe line including labour, hire charges for machineries, etc complete

Dismantling old MS pipes including taking out the pipes, conveying and stacking safely at 50m premises of work site as per the directions of departmental officers at site.

Excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth up to 1.5 m including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth. including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m:Pipes, cables etc. exceeding 80m dia but not exceeding 300 mm dia

Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

Supply and fixing of 200mm GI pipe for suction pipe line including cost of all materials, labour and hire charges of machineries etc. complete.

Supply and fixing of GI 200mm Bend to the pipe lines(200mm NB) including cost of material, labour , machinery, conveyance, incidental and handling charges etc. complete.

Supply and fixing of GI Flange 350mm OD x 200 ID x 16mm thk. to the pipe lines(200mm NB) including cost of material, labour , machinery, conveyance, incidental and handling charges etc. complete.

Supply of M16 bolt & nut with washer for fixing the flange connections including cost of materials, labour charges and conveyance etc complete as directed by the departmental officers at site.

Providing and fixing U - Clamp for Pipes including cost of all materials, labour charges & conveyance,etc.omplete.

Supplying and fixing strainer of suitable size to the bottom of MS pipe to protect from entry of weeds and other materials in to the pipe line, including cost and conveyance of all materials etc. complete

Conveying the 200mm dia GI pipe and fittings and all other materials from road side to work site approximate distance 300m by manualy and stack safely at premises of the pump house including cost of all materials, labour, all lift and leads etc. complete.

Providing new base nut mechanism for intake shutter 2Nos at pumpside, bend corrections if any of existing screw rod and sill beam concrete work for preventing leakage through the bottom side of intake shutters. (Pump House side)

Clearing grass from banks of channel and removal of silt, zoological waste & debris from canal bed, removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared including conveyance charges

RING BUND Type-I-Putting up ring bund as per approved shape 2.5m bottom width, 1m top width using empty gunny/polythene bags filled with earth placed in 2 rows at 0.6m apart and filled in between with puddle clay to form bund for an average height 2.00m including labour dismantling the bund after completion of the work etc. complete.

Bailing out water Using 5HP Pump- Bailing out water with 5HP engine and pump set including conveyance to site and erection,cost of fuel, lubrication oil and other stores, pay of staff etc complete

Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 leaner mix ( including equivalent design mix)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

Supply of MS flats including cost of conveyance charges

Supply of MS round bar including cost of conveyance charges

Supply of MS checquered plates including cost of conveyance charges

Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

Replacing base and nut arrangement of hoisting mechanism including cost of all materials labor etc complete

Fabrication and erection of Embedded parts for canal shutters and accessories as per approved specifications or drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied.

Fabrication and supply of Structural steel canal shutters ( Up to 2 tonne weight ) /Hoisting Bridge / Platform and accessories etc. for the same as per approved specifications, drawings and directions of deptl fficer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/- 5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc.complete as per the direction of department officers at site

supply the SS bolt and nut including cost of material,conveyance etc complete.

Conveying the fabricated structures and its accessories from road side to site by manually including cost of all materials, labour, hire charges of petty tools , lift and leads etc. complete.

Erection of the new Hoisting Platform including chequered platform, hand rails, ladder etc. safely on the civil structure, assembling and aligning including cost of all machinery, labour all incidental and conveyance charges etc complete as per direction of departmental officer at site.

Trial run the gate with its hoisting mechanism etc. including cost of all materials, machinery , labour, all lift and lead, incidental and conveyance charges etc. as per instruction of departmental officers in charge.

Fabrication, Painting and erection of one regulator shutter (Kayal side) and overhauling of hoisting mechanism of all 3 shutter at kayal side.

Clearing grass from banks of channel and removal of silt, zoological waste & debris from canal bed, removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared including conveyance charges

RING BUND Type-I-Putting up ring bund as per approved shape 2.5m bottom width, 1m top width using empty gunny/polythene bags filled with earth placed in 2 rows at 0.6m apart and filled in between with puddle clay to form bund for an average height 2.00m including labour dismantling the bund after completion of the work etc. complete.

Bailing out water Using 5HP Pump- Bailing out water with 5HP engine and pump set including conveyance to site and erection,cost of fuel, lubrication oil and other stores,

Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 leaner mix ( including equivalent design mix)

Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

Supply of MS round bar including cost of conveyance charges

Supply of MS flats including cost of conveyance charges

Fabrication and erection of Embedded parts for canal shutters and accessories as per approved specifications or drawings and directions of deptl officer at site including cost of labour,machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material. already supplied.

Fabrication and supply of Structural steel canal shutters ( Up to 2 tonne weight ) /Hoisting Bridge / Platform and accessories etc. for the same as per approved specifications, drawings and directions of deptl fficer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm

9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete

Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/- 5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

Overhauling of one number worm and pinion reduction gear assembly unit with hand operating system and bend checking of screw rod , providing new handke fir operation etc. including hire charge of equipment, energy charges, conveyance, all leads and lifts etc. complete as per directions by the dept. officers at site

Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

Supply and fixing of Bush type CS Roller having OD 90mm x ID 45mm x thread width 55mm with Al Bronzel bush and SS shaft Dia 35 x 110L including cost of all materials, labour , incidental and conveyance charges etc. complete.

supply the SS bolt and nut including cost of material and conveyance etc complete

Erection of the new Shutter and accessories including alignment correcting and setting complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc. complete but excluding cost of materials already supplied.

Trial run the gate with its hoisting mechanism etc. including cost of all materials, machinery , labour, all lift and lead, incidental and conveyance charges etc. as per instruction of departmental officers in charge.

ANILKUMAR K K

Brothers Engineering Contractors

Bidder Name

ANILKUMAR K K

Brothers Engineering Contractors

Amity Projects & Construction