REPAIRS TO ROOF CEILING, WALLS JOINERY ETC AND DAY TO DAY MAINTENANCE SERVICES TO CERTAIN MARRIED ACCN AT ZONE 5 AND ZONE 1(B) AND ZONE 1 (C) AND REPAIR/ MAINTENANCE OF SWIMMING POOL, SEWAGE TREATMENT PLANT WITH ALLIED WORKS UNDER GE (S) TEZPUR

Amount

Taking down chowkats or frames not exc 1.5sqm each with shutters( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts.

Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts.

Taking down of shutters of any description exc 1.00 Sqm and n.exc 2.00 sqm each

Taking down of shutters of any description n.exc 1.00 Sqm and each

Refixing of shutters of any description exc 1.00 Sqm and n.exc 2.00 sqm each in same opening including of taking down, easing, adjusting and renewal/refixing of builders hardware as required including renewal of unserviceable screws, etc.

Refixing of shutters of any description n. exc 1.00 Sqm each in same opening including of taking down, easing, adjusting and refixing/renewal of builders hardware as required including renewal of unserviceable screws, etc.

S&F factory made 100% solid wood plastic compote(WPC) door frame of size 125mm X 65mm made frame wood plastic complete(single extended process) material with density 780 kg/cum & plastic wood or equivalent makes all as specified and directed.”

Dismantling timber scantlings 40 sq. cm and over in section, in any position in framed work

M&L Second class hard-wood in wrought scantlings in timber framed and fixed

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides

Supply and fix 30mm thick second class hard wood glazed and skeleton, open rebated and prepared to receive glass/ wire cloth, gauze exc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. The sizes of members of shutters as per IS-1003 (Part-2), kiln seasonable and chemically pressure treated and fitted to chowkhats complete all as specified and directed. (Note : Glass / wire cloth wil be measured and paid separately).

S&F factory made solid PVC door frame of size 50mm x 47 mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube as specified & directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC stiles and plain colour PVC sheets for top rail, lock rail bottom rail on either side & as gap insert for top rail & bottom rail panneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile & rails with suitable PVC sheet beading & jointed together with solvent cement all as specified and shown on drawing.

M&L in repairs Prelaminated particle board 18/19 thk, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work

S&F 100mm size type B-21 Butt hinges extruded aluminium alloy with aluminium hinges pin anodised.

S&F 75mm size type C-21 Butt hinges extruded aluminium alloy with aluminium hinges pin anodised.

S&F extruded aluminium alloy handels fabricated type, anodised, 150mm long.

S&F extruded aluminium alloy handels fabricated type, anodised, 100mm long.

S&F Aluminium anodised sliding door bolts of size 300mm long, with hasp & staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extreded sections or cast aluminium alloy.

S&F Aluminium anodised barrel tower bolts of extruded section 200 mm long and fixed with screws.

S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long and fixed with screws.

Supplied and fixed Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified,

Supplied and fixed Pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified,

Supply and fix, steel windows with side hung shutless including box type hinges with steel handle and steel peg stay, complete with glazing bars, donetailed or welded all as soecified and directed.

S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified.

Supply and fix, steel ventilator with top hung shulter including hinges, steel peg stay, complete all as specified and directed

S & F in repairs 300 mm MS ordinary type springs, including roller and roller plate complete all as specified and directed

Dismantling Structural steel work includings door, gates, etc and similar works complete all as directed

S&F of joist, channel, angle, flat iron or Tee sections, fixed independently with connecting plates, etc confirming to Fe 410-W (Gde 250 quality A) complete all as specified and directed.

Supply & Fix framed works such as grills grating etc with ends of bars shouldered and for rivetted in forged into spikes, framed guard bars, railing and similar work confiring to Fe-410-0 or Fe 310-0 complete all as specified and directed

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F Mild steel hold fasts fixed with MS screws, all conforming to Fe410-0.

M/L PCC 1:3:6 type C1 20mm grade aggregate as in padding, hold fasts block filling, filling of steel chowkhats, coping or similar work as directed.

Hacking out old broken glass any thickness, size, quality or description from wooden / metal frame works, glazed with putty or fixed with beads

S&F 4 mm thick frosted/ pin headed glass in ventilator shutters all as specified and directed by Engr-in-Charge

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and directed.

Material & Labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L Preparation of new wood surfaces of any description over 10cm width or girth and priming with pink primer and painting with synthetic enamel painting two coats.

Dismantling floor, hearth or wall tiling including cement mortar bedding,(but not backing) removing serviceable tiles to store and rubbish off the premises.

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6.

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in Skirting/Dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4.

S&F Coloured Glazed ceramic tiles 300x200mm x 6 to 7mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm rendering in Cement mortar 1:4. .

S&F Coloured Glazed ceramic tiles 450 x 300 mm x 6 to 7mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm rendering in Cement mortar 1:4. .

Demolition of cement concrete (un reinforced ) in ground floors and paving n. exc 15cm thickness (below or above ground level) complete all as directed.

Material and labour for providing 40 mm thick cement concrete (1:2:4) type B1 using 20mm graded aggregate as in floors finished the surfaces even and rough to receive to topping layers all as specified.

M&L 75 mm thick PCC 1: 3:6 type C2 using 20mm graded agg finishing even and smooth without using extra cement as in plinth protections/path and laid fair in alternate bays n including filler joints with sealing compound grade 'A' complete all as specifed and as directed.

Dismanting wall /ceiling board (Fibre pulp insulation) or insulation boards any thickness including fillets and cover fillets.

Dismanting timber scantling under 40 Sqcm in secion In fillests, rails , posts, refters and purlins etc in any position in framed work or unframed work

S&F Exposed GI powder coated snap grid frame for false ceiling 600x600mm size of wall angle 25x25x0.25mm size of cross tee and main tee 26x24x0.25mm and 32mm x 24mm x 0.25mm with 1.5mm dia double GI suspentor including supply and fixing of 4mm thick E Board decorative type in false ceiling including fixing arrangement from steel tress any type of tress (Make: E Board Everest or equivalent as approved by GE)

S& F in repairs of 4mm thick E Board decorative type in false in any type of frame work all as sepcified and drected (Make: E Board Everest or equivalent as approved by GE)

M&L 2nd CL HW plain fillets square, rectangular in section clean sawnn sectional area exe 13 sqcm & n.exe 25 sqcm fixed with nails including one coat of black oil.

Dismantling asbestos cement corrugated semi corrugated etc sheets in roof covering.

S&F 6 mm thick asbestos cement corrugated or semi corrugated sheets in roofs, walls etc fixed with 'L' type or 'J' type or cranked book bolts. Complete all as specefied and directed.

Material and labour for 6 mm thick asbestos cement, two piece adjustable serrated ridge for corrugated and semi corrugated sheets fixed with ‘L’ or ‘J’ type or cranked hooks bolts all as specified and directed.

Demolition of brick work built in cement mortar including pillar etc below/ above ground level etc and removing to a distance not exc 50 meter. complete all as specified and as directed by Engr-in-Charge.

Material and labour for old size fly ash /concrete best quality bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) having compressive strenght not less than 75 kg/Sq cm all as specified and directed.

Material and labour for old size fly ash /concrete best quality bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar ( 1:6) having compressive strenght not less than 75 kg/Sq cm all as specified and directed.

Taking down cement plaster on brick concrete surfaces including racking out joints hacking for key, scrubbing down with, water etc.

Material and labour for 15 mm thick rendering in cement mortar (1:4) in fair faces of brick works or concrete surfaces mixed with Integral Water Proofing Compound as per manufacturer instructions all as specified and directed. NOTE : The Integral water proofing compound will be measured and paid seprately

Supply only integral water proofing compound all as specified..

M&L rendering 10 mm thick in cm (1:6) on fair faces of brick work finished even & fair without using extra cement.

M&L Three coats of white wash new plastered wall surfaces including preparation of new surfaces complete all as specefied and directed.

M&L Applying two coats of Oil bound distemper to newly plastered/previously untreated wall over a coat of 1 mm layer wall care putty over a coat of primer including preparation of newly platsered wall all as specefied and directed.

Taking up or down 15 mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site complete all as specified and directed.

All as per item No 67 here in before but 20 mm bore.

S&F of 15 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor complete all as specified and directed,

All as per item No 69 here in before but 20 mm bore.

Supply and fix,as in repair,15 mm bore pillar tap, fancy type cast copper alloy, with single lever, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanuls and fly nuts, screwed for iron pipe or for brass ferrule all as specified and directed.

Supply and fix,as in repair, 15 mm bore bib taps, cast copper alloy,cromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.

Supply and fix, as in repair, bib tap standard of PTMT any colour screwed, for iron pipe 15mm bore (minimum weight 90 gms) all as specified and directed.

Supply and fix, as in repair,15 mm stop valve of PTMT of any colour high pressure screwed for iron pipe and fixed for 15 mm bore of pipe(minimum weight 90 gms) etc complete all as specified and directed.

S&F in repairs kitchen plate rack made out of stainless steel 0.63 mm thick sheet with partitions and size of rack 800 x 250 x 900 mm with shape and pattern as per sample kept in Sample room of GE Office complete all as specified and directed.Make-Bluestar/prayag/Jaquar

Supply & Fix in repairs hasp and staple of size 100 mm aluminium anodised wire type including bolt to hinges plate and fixed with screws complete all as specifed and directed

Supply & Fix as in repair 20 mm dia CP curtain rod (colour coated) with two Nos of socket (decorative type) complete for doors/window opening all as specified and directed

Taking down existing damaged water closet alongwith complete PCC and lime concrete from sunken floor and providing new EWC / IWC and water proofing treatment to sunken floor as per following stage :- (i) 15mm thick plastering in CM (1:2) with WPC at all around and base of sunken floor with proper slope. (ii) Applying a coat of 85/25 gde hot bitumen @ 0.7Kg/Sqm over a coat of bituminous primer @0.5Kg/Sqm and then pasteing of polythene film, 150 micron, natural colour with cold cut back adhessive. (iii) Providing lime concrete and cement concrete to fill up the sunken floor (PCC 1:4:8) after testing of water tightness.

S & F in repairs floor door stopper aluminium alloy body overall length 140 mm and tonge , anodised with hard drwansteel spring all as specified and directed

Demolition of old damaged existing water proofing compound on RCC roof of any description and specification and cleaning the surface thoroughly all as specified and directed

M & L 15 mm thick in cement mortar (1:4) on existing roof surface true to level after applying cement slurry @3Kg/Sqm and applied coat of hot blown bitumen of graded 85/25 @1.2 Kg/Sqm

Supply and laying 3mm thick APP based Polymeric membrane of approved manufacture with weight not less than 3.60 Kg per Sqm reinforced with non-woven polyster febric weight not less than 150gms per Sqm.The overlap shall be not less than 100mm on transverse direction and 75mm on longitudinal direction and sealing overlaps and Applying evenly one coat of aluminium paint @ 0.10 liter per square metre over the APP based polymeric membrane including taking down of water tank of any capacity and size with connections etc and refixing the same in position including replacement of any damaged item” complete all as specified and as directed.

Supply and fix, as in repairs, sheet glass self/corner shelf assembly consisting of 5.00mm thick sheet glass shelf 12cm wide with cromium plated bracket guard all as specified and directed.

Supply and fix, as in repair, vitreous china wash down water closet pan (Pedestal pattern) 'P' or 'S' trap white (excluding flushing cistern and flush pipe) including seat cover white closed type complete all as specified and directed

Supply and fix, as in repairs, plastic water closet seat, closed pattern with flat bottom, and cover for water closet pan (padestan pattern) all as specified and directed. ESSCO ECS-WHT-101N

S&F in repair of Towel Rail of 20mm dia, 60cm long between flanges complete all as specified and directed. Make- ESSco or equivalent (Cat no.AEC -1111)

S&F in repair brass choromium plated soap dish complete all as specified and directed.

Supply and fix, as in repair, stop valve, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions all as specified and directed.

M&L for Endura coloured ceramic tiles of size 300 X 300 X 9 to 10 mm thick with grey cement and pigment, set and jointed and pointed in neat cement slurry in floors laid over & including 15 mm thick screed bed in cement mortar 1:6 all as specified and as directed.

Supply and fix, as in repair, vitreous china wash basin, white, flat back size 580 x 450 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed.

Supply and fix, bowel urinal flat back of size 465 x 355 x 265mm (minimum), white, with grating and union for discharge pipe, (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinals against wall in cement mortar (1:2) securing urinals to plugs with and including 60 mm brass screws and pointing around urinals back in cement all as specified

Supply and fix, as in repair, sinks with drainage board made out of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortor to dwarf wall or including fixing cantiriver lever brackets and connecting union to pipe overall size 915mmX460mm and bowl size 410mmX330mmX160mm all as specified and directed. Make - Nirali /Anjali/Prayag.

Demolition and breaking up old broken , PVC (SWR) , Cast Iron, AC, SWG soil waste and vent pipe up to 150 mm bore including accessories set in cement mortar and removing rubbish from site as directed by Engineer-in-Charge complete all as specified and directed.

S & F PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floor or fixed in wall 110 mm.

S & F PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors or fixed in wall 75 mm.

S & F PVC (SWR) bends any radius 75 mm bore

S & F PVC (SWR) bends any radius,110 mm bore

S & F PVC (SWR) junction single,(Single T) equal or unequal of 75 mm dia

S & F PVC (SWR) junction single,(Single T) equal or unequal of 100 mm dia

Supply and fix, as in repair, Overhead Shower 100 mm dia Round Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning Syste, including fixing to steel pipe or union of 15mm bore all as specified and direcetd. Essco Cat No Eos-542A or equivalent

Supply and fix,as in repair, CP 40mm dia waste coupling for stainless steel sink with inlet and out let screwed for pipe or connections including packing, union and cap etc complete all as specified and directed.

Supply and fix,as in repair, waste coupling CP 32 mm dia for glazed ware basins etc with fly nuts flanged etc complete all as specified and directed.

Supply and fix,as in repair, 32 mm dia PTMT 610 mm long waste pipe suitable for WHB complete all as specified and directed.

Supply and fix,as in repair, 40 mm dia PVC 610 mm long waste pipe suitable for Sink complete all as specified and directed.

Supply and fix,as in repairs, 75 mm dia of outlet PVC(SWR) floor trap, plain with grating including jointing with solvent cement all as specified and directed

Supply and fix, as in repairs, grating round 100mm dia size of CP all as specified and directed.

S&F in repair 15mm bore dia brass choromium plated wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S & F In repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty all as specififed and directed

Taking down existing aluminium shutter of area exc 1.0 Sqm but not exc 2.00 Sqm and refixing the same in the same opening after reparing and make functional including replacement of fitting and fixture for proper functioning as required all as specified and as directed.

Supply and fix, as in repairs, Hand Shower (Health Faucet) (Brass chromium plated) with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook complete all as specified and as directed.

Supply and fix, as in repairs, vitreous china squatting pan of Orrisa pattern size 580mm x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection making good to floor all as specified and directed.

Supply and fix, as in repair, 10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white, with inlet, ball valve float and handle including brackets & flush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and directed.

Supply and fix, as in repair,15 mm dia 450 mm long connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and directed.

M&L one coat of white wash on old wall surfaces of walls and cornices including preparation of old plastered or un plastered of surafce of wall by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot all as specified and directed

M&L one coat of white wash on ceiling and cornices including preparation of old plastered or un plastered of surafce of ceiling by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot all as specified and directed

M&L complete removal of existing treatment and appplying two coats of weather coat(Apex) over one coat of damp shield with one coat of putty to old plastered walls as per manufacturer instrcution including properly fillings the cracks and apllied by approved applicator complete all as specified and directed.

M&L Applying one coat of Oil bound distemper to old wall surfaces of walls and cornices including preparation of old plastered or un plastered of surafce of wall by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot all as specified and directed

M&L for applying for preparation of old painted surfaces of wood and woodbase surfaces of any description , not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint all as specefied and directed.

M&L for applying for preparation of old painted surfaces of old painted steel surfaces and iron surfaces pf any description ,over 10cm width or girth incl and applying one coat of synthetic enamel paint all as specefied and directed.

Dismanting timber boarding of any description fixed in any position

M&L second class hardwood Weather boarding, 20mm thick, wrought both sides and edges shot and chamfered

S & F in repairs Aluminium (extruded section body type )door closer hydraulically regulated designation No 3, universal type , suitable for door shutter of 851 to 1000 mm in width and of weight and weight betwwen 61 to 80 kg ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed

S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Anodised aluminium window and ventilator shutters(two/three track), sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.complete all as specified

S&F Anodised aluminium door shutter aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 02 Nos in each door , hinges ,anodised aluminium snap beading, screws etc.complete all as specified

S&F 5 mm thick tinted/heat absorbing glass of any size with aluminium bedding and complete all as specified and directed.

M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) light shade, polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6.

All as per item No 129 above but in skirting over 10mm thick screeding in cement mortar 1:4

M/L Granite (of any type) tiles 18 to 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm thick screed bed in CM 1:4 over cooking platform.

M&L 18 to 20 mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 10mm thick rendering in CM 1:4.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

S&F pre-painted galvalume aluminium zink coating GI based corugated high profile steel sheet 0.50 mm thick of an colour having tensile strength of 550 MPA as in roof covering /cladding to wall, fixed with self tapping screws as specified.

S&F pre-painted galvalume aluminium zink coating GI based plain steel sheet 0.50 mm thick of an colour having tensile stenght of 550 MPA as in roof covering /cladding to wall, fixed with self tapping screws as specified.

M&L for Applying two coats of cement base paint over a coat of alkali resistance primer to newely plaster/previously untreated walls including preparation complete all as specefied and directed.

Supply and fix, as in repair, counter type wash basin vitreous china wash basin, white,size 545 x 545 x 180 mm, including centeral hole mixer taps, waste coupling & waste pipe, complete all as specified and directed. Jaguar Cat No FSS-WHT-29601

S&F stainless steel plate any thickness & any size grade 304, bend to shapes required and fixed with SS screws all as specified and directed.

S&F as in repair toilet paper holder of brass chromium plated fixed to walls with chromium plated (CP) brass screws.

S&F as in repair steel handles for steel window for left and right side shutter all as specified and directed

Taking down unserviceable MCCB, of any type/capacity.

Supply and fix, MCCB 4 Pole .415 V. Adjustable Thermal & Adjustable Magnetic setting,125 Amps, with breaking capacity 25 KA Complete all as directed by Engineer-in-charge

Supply and fix, MCCB 4 Pole .415 V. Adjustable Thermal & Adjustable Magnetic setting,100 Amps, with breaking capacity 25 KA Complete all as directed by Engineer-in-charge

Supply and fix, MCCB 4 Pole .415 V. Adjustable Thermal & Adjustable Magnetic setting,200 Amps, with breaking capacity 35 KA Complete all as directed by Engineer-in-charge

Supplyl and fix, MCB TPN 40 Amps.'C' curve complete all as directed by Engineer-in-charge

Supplyl and fix, MCB TPN 63 Amps.'C' curve complete all as directed by Engineer-in-charge

Supply and fix, 7.5 HP/5.5 KW Directon-on-line starters in sheet -steel enclosure type MF, MK, MU & MB (Motor rating AC-3 Duty, 415V, 50 HZ, 3-Ph) of Cat No SS96211 of Make L&T or equivalent

Supplyl and fix, 3 Pole power contractor MNX9, 25A, Make L&T Make L&T or equivalent

Supplyl and fix, single phase preventor relay SPPR type Sz5 (6wire) 415V Cat No CS94824DOOO of make L&T including connecting complete all as directed by Engineer in Charge

Supplyl and fix, 3 Phase LED Ammeter having range 0-20 Amp. Make : L&T or equivalent

Supplyl and fix, 3 Phase LED Voltmeter having range 0-500 Volts. Make : L&T or equivalent

Taking down unserviceable PPR pipe of any size

Supplyl and fix, 3 layer PPR polypropylene random copolymer) pipes SDR 7.4 & SDR PVC pipe 160 mm bore heavy duty with all fittings ratting 10kgf/cm²of any length including taking UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply all PPR plain & brass threaded polypropylene random fittings laid in trench

Supply and fix PVC re-inforced Flexible Hose pipe green size 50 mm dia.

Disconnecting the Electric connection and removing coupling from unserviceable Motor of capacities 5.5 HP, 3 phase 415 volt and transportating to workshop for rewinding the motor. Dismantling , cutting and removing the burnt windings from the motor,cleaning the core ,removing all carbon by chemically and rewinding with existing size/gauge of super enameled/copper wire and other approved insulating materials, heating, drying including varnishing, overhauling, reassembling the motor, installing, commissioning, testing and connecting up complete for the motor with pump and electric all as directed.

Disconnecting the Electric Connection and removing coupling from unserviceable Motor of capacities 3/ 5 HP, 3 phase 415 volt and transportating to workshop for rewinding the motor. Dismantling , cutting and removing the burnt windings from the motor,cleaning the core ,removing all carbon by chemically and rewinding with existing size/gauge of super enameled/copper wire and other approved insulating materials, heating, drying including varnishing, overhauling, reassembling the motor, installing, commissioning, testing and connecting up complete for the motor with pump and electric all as directed.

Supply and replacement of unserviceable Ball bearing No-6305 Make :NBC/SKF/TATA.

Supply and replacement of unserviceable Motor terminal box of suitable sizes.

Disconnecting Recirculating pump having discharge capacity 50M³/Hr at 15 mtr head from its existing foundation bed to the place (inside/outside building) where directed, dismantling the pump carefully, checking and segregating serviceable and unserviceable parts, cleaning serviceable parts thoroughly by approved method parts like impeller shaft,bearing. Replacing unserviceable parts by new ones as required for pump .Rreassembling installing to its existing foundation, commissioning, testing and connecting up including painting the pump foundation with two coats of synthetic enamel paints and marking SM,MES No, or Sl No complete all as directed. Note: Replacement of unserviceable parts will be measured and paid in recpactive tiems.

Supply and replacement of unserviceable Ball bearing No-6309 Make : NBC/SKF/TATA

Supply and replacement of Shaft for pump.

Supply and replacement of M S Shaft key.

Supply and replacement of CI / Brass Impeller.

M & L for Repairing/fabrication of Suction sweeper trolley made of MS channel with cuting of rusted part and fitting MS channel by gas welding including painting with two coats enamel paint complet and replace with following acessories all as directed. (a) Wheel for Suction sweeper 4 Nos. (b) Nylon Brushes 3 ' long for Suction Sweepers- 04 Nos

Disconnecting and taking out U/s Parts of fountain such as Nozzle, fountain light fitting 40 mm connecting pipe clamps etc and refixing/reconnecting to all and painting all fountain system and supply and fixing the following items for repair the fountain all as directed.(a) brass Nozzle thread type 3/8" dia 3" long in existing pipe complete with nuts=6nos.(b) LED Fountain light fitting =6 Nos.(c) including painting of all connection pipe.

Dismantling and taking down unserviceable street light security light/Highmast light fitting of any wattage or size for repair and refixing in original position 150/250/400W,HPSV/MH and T-5 light fittings complete all as directed.Note: Material for repair light fittings will be measured and paid under respective items.

Supply and fixing New generation energy saving and environmental friendly long life LED street light 45 Watt made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07. Cat Ref: ENDURAPEARLNEOSL45WLED757SASYTOPC of Make: Havells

Supply only Calcium Hypochlorite calcium based high strength granular chlorine having 65%-70% chlorine content packed in 45 Kgs PVC sealed container, superior quality suitable for treatment of drinking water and swimming pool (much more stable than chlorine gas, bleaching powder and sodium hypochlorite) all as specified and directed by Engr-in-Charge. Note (i):- Approval of chemical (Calcium hypochlorite) shall be given after verification of test certificates of chemical various manufactures and other features like chemical and safety and health hazard aspects of usage chlorination (ii) the branch/make of the chlorination of chemical must be stated in production and certified by govt laboratory confirming compliance of specification suitable for drinking water with a declaration from the laboratory that from the technical strength stability health safety and operation point of view this product is used for drinking water applications for consumption by humans and the brand/make of calcium hypochlorite is suitable for drinking water chlorination and its sample has been tested by Govt Laboratory. Note (ii) Traditional means of chemical shall be used subject to fulfil the parameters specified in the manual on water supply and treatment (Third edition May 1999) issued by CPHEEO), Ministry of Urban Development New Delhi.

Taking down any type wall light fitinng

Supply & fixing outdoor up- down light with IP65 protection, 5700 °K of Cat Ref: LUPDN-10-CDL of Make: Crompton

Supply and fixing in replacement of swimming pool under water light fitting 100 W/ 12 V with 100 W transformer complete all as specified and directed by Engr -in Charge.

Supply and fixing LED flood light fitting 200 watt Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium non integral IP66 flood light, suitable for high mast application, highlighting architectural facade and general purpose lighting. Make: Havells

Supply and fixing Surge Protection Devices compatible with industrial & outdoor LED fixtures Cat Ref: SRPSQ-10KV/5KA-440 of Crompton make Note:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount.

M/S N S CONSTRUCTION

M/s Borah Enterprise

Chinmay Traders