Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.0 LAdmitted-Fee/PreQual/Technical/Finance | L1 | Admitted-Fee/PreQual/Technical/Finance |
| Sl No | Description | Qty | Unit | SURESH KUMAR.M L1 |
|---|---|---|---|---|
| 1.00laying and relaying of tiles in roof | ||||
| 1.00 | OD199611/2025-2026:Removing and stacking of roof departmental pressed clay tile (Mangalore tile) of 20mm nominal thickness and of approved size as per approved pattern on roof complete | 55.2 | sqm | 57.91 ₹3,196.63 Lowest |
| 1.00 | OD5779/2026-2027:Removing or replacing on roof departmental pressed clay tile (Mangalore tile) of 20mm
nominal thickness and of approved size and as per approved pattern on roof complete | 73.6 | sqm | 214.11 ₹15,758.5 Lowest |
| 1.00 | 15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet | 48.3 | sqm | 139.54 ₹6,739.78 Lowest |
| 1.00 | 50.9.13.1:Supplying and fixing Anjily wood wrought and put up for roof members including cost and conveyance of materials etc. complete . | 0.35 | cum | 91,466.39 ₹32,013.24 Lowest |
| 1.00 | 50.9.14.1:Supplying and fixing Anjily wood reapers of size 50x25 mm with wire nails including cost and conveyance of materials etc. complete. | 0.17 | cum | 1,06,816.68 ₹18,692.92 Lowest |
| 1.01 | 6.4.2:Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in:Cement mortar 1:6 (1 cement : 6 coarse sand) | 0.66 | cum | 8,505.03 ₹5,613.32 Lowest |
| 1.01 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 53.82 | kg | 153.06 ₹8,237.69 Lowest |
| 1.01 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 48.3 | sqm | 689.12 ₹33,284.5 Lowest |
| 1.01 | OD205147/2025-2026:Providing and fixing weld mesh of required width in mesh size 12.5x12.5 mm ( 2mm thick) by welding as required complete as per the direction of Engineer in charge | 5.62 | sqm | 728.7 ₹4,096.75 Lowest |
Tender Value
₹3.4 L
EMD Value
₹8,470
Closing Date
25 Jul 2026, 11:00 amClosed
Assistant Executive Engineer
O/o the Assistant Executive Engineer, PWD Buildings Sub division, PMG, Thiruvananthapuram.
GENERAL-PWD Quarters- Laying and relaying of roof tiles and other connected works in E9A and E9B-Providing new roof tile, relaying existing roof tile and laying new roofing sheet in the building for preventing leakage issues in E9A and E9B Quarters l
2026_PWD_861075_1
PWD/BLDG/TR/18068/2025_5_1_1/1
Open Tender
Civil Works - Buildings
Item Rate
90 days
Thiruvananthapuram
Please refer Tender documents.
10 documents required · 10 mandatory
₹750
Yes
₹8,470
Yes
27 Jul 2026
17 Jul 2026
27 Jul 2026
17 Jul 2026
25 Jul 2026
17 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1laying and relaying of tiles in roof | |||||
| 1.001 | OD199611/2025-2026:Removing and stacking of roof departmental pressed clay tile (Mangalore tile) of 20mm nominal thickness and of approved size as per approved pattern on roof complete | - | sqm | - | - |
| 1.002 | OD5779/2026-2027:Removing or replacing on roof departmental pressed clay tile (Mangalore tile) of 20mm
nominal thickness and of approved size and as per approved pattern on roof complete | 1 | sqm | - | - |
| 1.003 | 15.28.1:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :G.S. Sheet | 1 | sqm | - | - |
| 1.004 | 50.9.13.1:Supplying and fixing Anjily wood wrought and put up for roof members including cost and conveyance of materials etc. complete . | - | cum | - | - |
| 1.005 | 50.9.14.1:Supplying and fixing Anjily wood reapers of size 50x25 mm with wire nails including cost and conveyance of materials etc. complete. | - | cum | - | - |
| 1.006 | 6.4.2:Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in:Cement mortar 1:6 (1 cement : 6 coarse sand) | - | cum | - | - |
| 1.007 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | - | kg | - | - |
| 1.008 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 1 | sqm | - | - |
| 1.009 | OD205147/2025-2026:Providing and fixing weld mesh of required width in mesh size 12.5x12.5 mm ( 2mm thick) by welding as required complete as per the direction of Engineer in charge | 1 | sqm | - | - |
stage.html
html • 0.02 MB
finance_1456209.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.05 MB
BOQ_1456209.xls
BOQ • 0.31 MB
epayment.pdf
Tender Documents • 0.05 MB
SBD.pdf
Tender Documents • 1.63 MB
PreliminaryAgreement.pdf
Tender Documents • 0.03 MB
declaration.pdf
Tender Documents • 0.00 MB
form_of_tender.pdf
Tender Documents • 0.18 MB
integrity_pact.pdf
Tender Documents • 0.05 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .