Renovation and Refurbishing including interior furniture and furnishing etc. in AIU building at 16, Comrade Inderjit Gupta Marg, (opp. National Bal Bhawan) near ITO New Delhi

Amount

Total Amount of BoQ 2

Amount after unconditional Rebate

Description of Work / Item(s)

Amount

Total of BoQ 3, BoQ 4 and BoQ 5

Total Amount of BoQ3 (Item Rate)

Total Amount of BoQ4 (Percentage Rate)

Total Amount of BoQ5 (Percentage Rate)

Description of Work / Item(s)

Amount

Schedule - ( A ) Bill of Quantites for Interior Finishing Items (NS Items)

SUB HEAD : FALSE CEILING- MODULAR TYPE

VENEER CEILING:

NS-1 - 'Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of plywood to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :

Providing and fixing in position 12mm thick plywood for soffit / false ceiling finished with 3mm to 4mm mm thick veneer finish

PANELLING

PLYBOARD WITH LAMINATE FINISH

'NS-2 - WALL PANELLING :- Fabricating and fixing wall/column paneling, the framing shall made out of aluminium hollow section of 40mm x 37mm size 1.5mm thick at spacing not exceeding 600mm bothways (horizontal and vertical). Paneling framework to be secured to wall surface/column surface.Paneling framework to be clad on one side with 9mm thick Comm. ply finished with 1.0mm thk laminate including skirting of 100mm high 6 mm groove at skirting level horizontal.

WALL PARTITION

'NS-3 - Full ht. Solid Partition :- Providing and fixing solid partition , the framing shall made out of aluminium hollow section of 65mm x 37mm size 1.5mm thick as internal frame structure placed horizontally & vertically at max distance of 600x600 mm" center to center. Fixing 6 mm thick commercial ply on both sides with 1.0mm thick laminate on top of approved shade with groove pattern as per instructions of EIC. The shade of laminate finish to be got approved by AIU/EIC. The skirting should be as per approved laminate as per drawing and direction. Rate shall be inclusive of necessary hardware items, etc. complete and the edge beadings with 80mmx40 mm steam beach wood should be finished with melamine polish, frame work above false ceiling done shall not be measured but contractor may factor it while quoting there rates as measurment up to false ceiling lvl. The work shall be complete in all respect as per sound engineering practice and direction of EIC.

NS-4 - 'Low Ht. Solid Partition up to 4'-0" : Same as Item no 10 above Low ht. All other specs same as item no 10, Edges of the partition to be covered with 80mmx40 mm Steam beach wood duly mela mine polished moulding. The work shall be complete in all respect as per sound engineering practice and direction of EIC.

SANITARY FIXTURES

'NS-5- Providing and Fixing 2 Nos. support arms and backrest to mounted on the track (vertically and laterally) for handicap toilet complete as required.

NS-6 -' Providing and fixing cp brass 32mm size bottle trap of approved quality & make and as per the direction of engineer-in-charg

NS-7 -' 'Providing Sink mixer (wall mounted) with 170mm long swivel spout connecting legs and wall flanges.

'NS-8 -' Providing and fixing Braided Hoses with Two 15mm CP Brass Nuts & Rubber Washers Without Nipple (Suitable for Geysers and basins) of approved make :

45 cm length

15 mm nominal bore

'NS-9 -' Providing,Fixing,testing and commissioning of CP brass twin coat hook with concealed screws.

NS-10 -' 'Providing and Fixing Health Faucet 15mmdia with CP flush pipe, CP nozzel hook complete including CP flange etc.

'NS-11 -' Providing & fixing C.P. brass towel rail with C.P. brass wall brackets & C.P brass screws complete as requiredSIZE 600MM X200MM

Size 600 x 20 mm size

'NS-12 -' Providing,Fixing,testing and commissioning of CP brass towel ring hook with concealed screws.

'NS-13 -' Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet & shower arm 180 mm including all necessary fittings complete.SIZE 100 mm diameter

NS-14 -' 'Providing and fixing soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements,weighing not less than 106 gms

'NS-15 -' 'Providing and fixing AUTOMATIC HAND DRYER 235X205X265mm (Stainless Steel) with no touch operating type with solid state time delay to allow user to keep hand in any position, fully hygienic, rated for continuous repeat use (CRU), wall mounting type suitable for 230 V, single phase, 50 Hz, AC power supply

NS-16 -' 'Providing and fixing horzontal/vertical Hot water geyser made of MS body with copper jacket inside with necessary inlet, outlet, drain, overflow, vent and all safety accessories etc. complete including cutting and making good the walls, wherever required.

'NS-16.1 -' 15 lit for Kitchen

'NS-16.2 -' 25 lit for Shower

'NS-17 -' Providing and fixing URINAL PARTITION white glazed vitreous china fixed at proper heights with CP brass bolts, anchor fasteners and MS clips as recommended by EIC

EXTERNAL WATER SUPPLY

'NS-18 -' Effecting connection from Existing/ Municipal Water Supply line including necessary excavation & making good the same including cutting, boring and tapping the Existing line by providing and installing ferrule / Tee connections with necessary fittings as required and making good the same. The rate for this item also includes complete services from the contractor for liasoning works such as filing necessary applications, submission of forms for approval to the municipal authorities, depositing the fees / other amounts as required for getting the premises / installations, inspected and approved and all other formalities required till the water connection is obtained. All the expenses incurred in this regard shall be borne by the Contractor except for the official payments to be made for any security deposit etc. which will be reimbursed on production of original voucher.

SOLAR WATER HEATING SYSTEM

Solar Collector Panel:

'NS-19 -' Supplying, fixing, testing & commissioning of black painted copper collector panel housed in aluminum casing with top of glass shall be as per specifications including all required structural support, necessary inter connecting piping, drain point with valve auto air vent valve etc. complete as required.

(Note : Civil work to be executed by other agency under requirement of Solar Hot water Heating Contractor. However this vendor to provide details of all such civil requirements & also ensure his supervision during the civil works execution).

Solar Water Storage Cum Calorifier Tank :

'NS-20 -' Supply, installation, testing & commissioning of SS 304 horizontal/ vertical Solar hot water storage cum calorifier tank with electrical backup (Capacity 600Lts) suitable for minimum 3 Kg /Sq.cm working pressure and having SS-304 tube for heat exchange of 270000 Kcal/Hr heat transfer capacity with electrical backup, duly mounted by removable type SS-304 flange with gasket, nuts & bolts. Tank shall be provided inlet / outlet, overflow / drain connection with MH cover (550 mm I.D.) pressure relief valves, thermometer at inlet / outlet. All the valves & accessories shall be suitable for an operating pressure as mentioned above. Tank shall be mounted on 450 mm high steel structural supports with access ladder painted with 2 coats of red oxide paint.

Tank shall be insulated as per specification, including 24 gauge aluminium cladding. The flanges shall be of SS 304 with dimensions confirming to AN SI, B 16.5 No. 150. The nozzles shall be SS ERW pipes. (Tank shall be fabricated as per unfired pressure vessel code IS 2825-1969, IS 226 / IS 2062).

'NS-20.1 -' Hot water mixing tank complete with insulation & MS supporting structure with access ladder duly paint with red oxide.

'NS-20.2 -' Cold Water inlet line of sutaible mm dia Check Valve.

'NS-21 -' Providing and fixing auto air vent for Hot water supply system suitable for pressure not less than 15 Kg / Sqcm including water expension tank of 100 mm dia. & 400 mm long expension tank complete as requitrd.

'NS-21.1 -' 15 mm dia

FIRE PROTECTION SYSTEM

Hydrants, Piping & Accessories

'NS-22 -' Providing, fixing, testing & commissioning of standard firemans axe with heavy rubber handle.

'NS-23-' Providing, fixing, testing & commissioning of automatic Air release valve with 15mm dia stop cock, flanged inlet connection, pressure gauge with gun metal stop cock complete with all accessories as required and conforming to IS IS : 12992 (Part 1)..

Portable Chemical Fire Extinguishers.

'NS-24 -' Supply, installation, testing and commissioning of following types of extinguisher with provision of wall bracket (fixed with anchor fastner).

NS-24.1 -' 'Providing & fixing ISI marked portable chemical fire extinguisher, water (gas pressure) type capacity 9 litres conforming to IS: 15683:2006 with gun metal cap and nozzle and complete in all respects including initial fill and wall suspension brackets

'NS-24.2 -' Providing & fixing ISI marked (IS:15683:2006) portable CO2 type fire extinguisher type 4.5 kg capacity. Including valve, discharge hose of not less than 10 mm dia & 1 M long complete in all respects including initial filled with CO2 gas confirming to IS:307-1966 & filled to a filling rate of not more than 0.667 and wall suspension bracket.

'NS-24.3 -' Providing & fixing of ABC Type, Portable Fire Extinguisher, dry powder type (Gas Cartridge) conforming to IS: 15683 : 2006 with cylinder initially fully charged with dry powder, ISI marked confirming to IS:15683 : 2006 complete with standard discharge valve with tube, CI bracket for wall mounting.

'NS-24.4 -' Mechanical Foam type Fire Extinguisher. In HP Mild Steel Cylinders ISI marked / approved fitted with pressure indicating gauge, internal tube, squeeze lever type valve fully charged complete in all respects including wall suspension bracket / trolley mounted and confoming to IS: 15683 : 2006

NS-24.4.1 -' '50 Litres (trolley mounted)

NS-25 -' 'Supplying and installing at approved location approved make fire buckets of 24 gauge galvanized steel sheet confoming to IS: 2546, standard 9 litre capacity and of round bottom shape, painted white inside and red outside and black on the bottom, inscribed with letters “FIRE” in black and gold. Cost shall be inclusive of providing MS stand duly painted over a coat of primer.

SPRINKLER, PIPING & ACCESSORIES

'NS-26 -' Providing, fixing, testing & commissioning of inspectors test assembly complete with test valve, sight glass sectional drain valve, union with corrosion resistant orifice all complete.

EXTERNAL FIRE SYSTEM

'NS-27 -' Providing, fixing, testing & commissioning of indoor type hose lockable cabinet frames fabricated from 40 x 40 x 5 angle iron sections and 16 gauge MS sheet with full front glass door and locking arrangement, suitable to accommodate landing valves, 15 m long hoses, first-aid hose reel and branch pipe nozzle & fire mans’ axe. The cabinet frame shall be painted with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade, as required (Approx 2.1 m (high) x 0.9 m (wide). The item shall be complete of MS housing with front door. '(Cost shall be inclusive of providing break glass box containing key for the cabinet along with hamer).

WATER TREATMENT PLANT AND PUMP

WATER TREATMENT PLANT

NS-28 -' 'Supplying, installing, testing and commissioning of SS vertical centrifugal pump. Each pump shall have TEFC 2900 RPM three phase electric motor. The pump shall have cast iron head, base plate SS Shaft / Impeller / Intermediate chamber. Pump shall be provided with mechanical seal. The pump shall be suitable for auto/ manual operation. The installation shall be complete with all necessary ancillaries & accessories including base plate complete as required.

Flow rate : 1 LPS each ( 1 Working + 1 Standby)

Head : 35 Mts

'NS-29 -' Providing, fixing, testing & commissioning of vertical FRP filter with adequate dirt holding capacity. The filter shall be complete having PVC frontal piping with 50 mm multiport valve including all supporting structure with initial charge filter media. The filter shall be provided with set of internals for raw water inlet and bottom collecting system. Velocity in frontal piping and valves shall be 1.50 m/sec.

Filter for Domestic Water services.

Filteration Rate 20000L/Sqm/Hr

Working pressure 3 Kg/Sq.cm

Capacity : 1 LPS

NS-30 -' 'Supplying, installing, testing and commissioning of chlorine dosing system (for domestic water treatment plant) consisting of one HDPE tank of 100 litres capacity with a positive displacement diphragm dosing pump having variable flowrate of 0-6 lph. The motor shall be suitable for operation at 240 V/Single phase/50 Hz. Supply. The pump shall be supplied complete with necessary polypropylene piping, valves, strainers, low level switch and injection fittings. The pump shall be speed & stroke control..

'NS-31 -' Supply, installing, testing and commissioning of annunciation and indication panel with interlocking arrangement complete in accordance to specification with level controller (In Raw Water, Treated Water and Soft Water Tank : High / Low Level Controller) etc with control cabling from field to MCC as required.

NS-32 -' 'Supply, installing, testing and commissioning of level controllers for water pumps to start/stop the pump at set level. Including wiring, cabling from pump to panel & all other accessories as required to operate the system automatically.

'NS-33 -' Supply, installation, testing and commissioning of tanker inlet connection complete with 80 mm dia GI inlet piping, hose inlet connection, MS cabinet enclosure (epoxy painted after fabriction), pad locking arrangement, inlet flexible hose complete with all necessary arrangement.

'NS-34 -' Supply, installing, testing and commissioning in position Vane type mechanical water flow meter for following pipe size.

'NS-34.1 -' 80 mm dia

NS-34.2 -' '100 mm dia

'NS-34.3 -' 150 mm dia

PUMP ROOM

Vendor to submit proposed pump model with duty curve.

Nos. of Pumps : 2 nos (1 w+ 1 s)

Water Flow Rate : 3.5 LPS each pump

Head : 15 M

Location : Plant room drainage

'NS-36 -' Supplying, installing, testing and commissioning of SS vertical centrifugal pump. Each pump shall have TEFC 2900 RPM three phase electric motor. The pump shall have cast iron head, base plate SS Shaft / Impeller / Intermediate chamber. Pump shall be provided with mechanical seal. The pump shall be suitable for auto/ manual operation. The installation shall be complete with all necessary ancillaries & accessories including base plate complete as required.

Flow rate : 1 LPS each ( 1 Working + 1 Standby)

Head : 35 Mts

'NS-36.1 -' Required for : Filter feed pump

Flow rate : 1 LPS each ( 1 Working + 1 Standby)

Head : 40 Mts

NS-36.2 -' 'Required for : Transfer pump to feed over head tank

'NS-37 -' Supplying, fixing, jointing and testing in position the following heavy class (Class C) GI pipes conforming to IS:1239 cut to required lengths including all necessary fittings (All fittings shall confirm to IS:1879 - part 1 to 10) and specials such as bends, tees, unions, reducers, flanges & plugs etc including testing of pipes twice of working pressure. Fixing at wall/ceiling level/shaf and terrace level supported by galvanized clamps, hangers etc as per specification or chasing in wall / floor and making good the same by using 1:1 cement mortar over the wire mesh. Threading, jointing, and making proper connections. Cutting hole in wall / floor / slab and making good the same and complete as required.

Cost shall be inclusive of providing two coats of synthetic enamel paint of approved shade on exposed pipes, over a coat of zinc, primer, including painting of legends with direction arounds

Providing protection to embedded pipes and fittings (in wall chase) by wrapping 400 micron polythene sheet over two coats of bitumen, including proper overlaps on joints complete as required.

NS-37.1 -' '15 mm dia

'NS-37.2 -' 20 mm dia

'NS-38 -' Providing, fixing, testing & commissioning of forged brass ball valve (PN 20) with forged brass ball suitable for test pressure of not less than 30 kg / sq.cm of the following size with nuts, bolts, gaskets, necessary accessories, etc as required..

'NS-38.1 -' 15 mm dia

''NS-38.2 -' 20 mm dia

''NS-38.3 -' 25 mm dia

''NS-38.4 -' 32 mm dia

''NS-38.5 -' 40 mm dia

'NS-38.6 -' '50 mm dia

'NS-39 -' 'Providing, fixing, testing & commissioning of Auto Air vent for cold water supply risers, suitable for pressure not less than 20Kg/Sq.cm.

15 mm dia

''NS-40 -' Providing, fixing, testing & commissioning in position of approved quality high pressure rated Gun Metal Float Valve with copper ball float (As per IS: 1703 also) and brass rods of required length suitable for test pressure of not less than 30 Kg/sqcm of the following sizes.

NS-40.1 -'50 mm dia

NS-40.2 -''65 mm dia

''NS-41 - ''Providing & fixing dial type (100 mm) pressure gauge with isolation ball valve suitable for working pressure of 300 PSI. Cost shall be inclusive of providing any short pieces, nipples, elbows etc as required.

Schedule - ( B ) Bill of Quantites for Furniture Items (NS Items)

'NS-42 - ''Providing and placing the main table shall be of size 2400 Width mm x 900 mm Depth x 750 mm height. Top surface of the table shall made up of MDF (Medium density fibre ) board duly finished with Veneer and final coating of PU. The Main desk should contain in built key board pull out tray for keeping keyboard of computer. The front modesty panel of the table shall be made up of MDF board of size 2240 mm x 600 mm x 16mm which shall also be duly finished with Veener and PU coating. For personal storage one mobile pedestal (3 drawer unit) shall be provided of size 510 mm Width x 635 mm Height and 445 mm Depth. The storage pedestal shall also be made up of MDF duly finished with veener & final coating of PU. The Side shall be of size 1200mm Width x 445mm Depth x 660 mm Height. The side unit shall be made up of MDF board duly finshed with Veneer and final finish by PU Coating. The design of the side unit shall be such that it can be placed on either side of the main table. The side unit shall contain open space for keeping cpu in extreme right side, one closed storage shutter at extreme left end & open space in the middle with one shelf for keeping files. The thickness of the top of the side unit shall be 25mm.

NS-43 - 'Providing and placing the Back unit whose size shall be 2215mm width x 410 mm Depth x 2000mm height. The back unit shall be made up of MDF board duly finished with veneer & final finish by PU coating. Below storage shall be provided with wooden shutters & the upper left & right side of the back unit shall also be provided with wooden shutters. The middle 3 door shutters should be of glass of minimum 5mm thick for display purpose. The hardness of the PU coating shall be 1.5H

NS-43 - 'Providing and Placing in Position High Back Chair. The cushioned seats shall be made of injection moulded plastic outer and inner. Plastic inner shall be upholstered with pure leather and moulded high resiliance polyurethane foamof Density = 45±2 kg/m³, and hardness load 16±2 kgf as per IS:7888 for 25% of compression. Seat size shall be 47.6 cm W x 49.2 cm D. The back shall be cushioned and shall be made up of PU foam with insitu moulded MS ERW round tube of size 1.9±0.03 cm x 0.16±0.0128 cm, upholstered with pure leather. Back size shall be 47.5 cm W x 77 cm D. The armrest top shall be moulded from polurethane, and shall be upholstered with pure leather and mounted on ot a drop lift adjustable type tubular armrest support made up of Ø3.81±0.03 cm x 0.2±0.01 cm thick MS ERW tube having chrome plated finish. The armrest hieght shall be adjustable upto 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism shall be designed with the following features : 360° revolving type, front-pivot for tilt with feet resting on ground and contionuous lumbar support ensuring more comfort, Tilt tension adjustment can be operated in seating position, 5-position tilt limiter giving options of variable tilt angle to the chair, seat/backtilting ratio 1:2, the mechanism housing is made up of HPDC aluminium black powder coated. Seat depth adjustment shall be integrated in the seat through a sliding mechanism. Seat depth adjustment range shall be 6.0±0.5 cm. Back frame shall be connected to the up/down mechanism housed in plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. the pneumatic height adjustment shall have an adjustment stroke of 10±0.3 cm. The pedestal shall be high pressure die cast polished aluminium and fitted with 5 nos. of twin wheel castors. The pedestal shall be 65.0±0.5 cm pitch centre dia. 5 nos. of twin wheel castors shall be injection moulded in plastic having 6.0±0.1 cm wheel diameter and assembled to pedestal.

NS-44 - 'Providing and Placing in position Visitors. The cushioned seats shall be made of injection moulded plastic outer and inner. Plastic inner shall be upholstered with pure leather and moulded high resiliance polyurethane foamof Density = 45±2 kg/m³, and hardness load 16±2 kgf as per IS:7888 for 25% of compression. Seat size shall be 47.6 cm W x 49.2 cm D. The back shall be cushioned and shall be made up of PU foam with insitu moulded MS ERW round tube of size 1.9±0.03 cm x 0.16±0.0128 cm, upholstered with pure leather. Back size shall be 47.5 cm W x 77 cm D. The tubular frame shall be cantilever type and made of Ø2.54±0.03 cm x 0.2±0.016 cm thick SS 202 tube. The back shall be connected to the frame through chrome plated high pressure die cast connector piece.

NS-45 - Supplying and placing in position 3 Seater sofa of the following specifications.Upholstery : Microfibre with Polyester Laminate Frame Material : Kiln dried wood Seat Foam : Slab stock foam with recron layer. Also bonded foam used as a supporting material beneath slab stock. Foam Density : 34 kg/ cubic m. Back Foam : Slab stock foam with recron fill at back and arms. Foam Density : 34 kg/cubic m. Webbing Material : S- spring along with nylon strips. The overall dimension of the sofa shall be 2072 mm(W) x 912 mm (D) X 830mm (H). The upholstery is made of fabric. The seat and backrest is filled with recron. The frame is made up of tropical wooden.

NS-46 - Supplying and placing in position 2 Seater sofa of the following specifications.Upholstery : Microfibre with Polyester Laminate Frame Material : Kiln dried wood Seat Foam : Slab stock foam with recron layer. Also bonded foam used as a supporting material beneath slab stock. Foam Density : 34 kg/ cubic m. Back Foam : Slab stock foam with recron fill at back and arms. Foam Density : 34 kg/cubic m. Webbing Material : S- spring along with nylon strips. The overall dimension of the sofa shall be 1572 mm(W) x 912 mm (D) X 830mm (H). The upholstery is made of fabric. The seat and backrest is filled with recron. The frame is made up of tropical wooden.

NS-47 - 'Providing & placing in position table with sizes 1000 W X 600 D X 428 H mm with top made in 10mm tempered glass supported with an understructure of MDF & finished with paper laminate. Lower shelf shall be made of MS CRCA steel with epoxy polyester powder coating. The work shall be carried out as per the instructions received from engineer in charge.

NS-48 -Providing & placing in position Side table with sizes 500mm(W) X 500mm(D) X 428mm(H) with top made in 10mm tempered glass supported with an understructure of MDF & finished with paper laminate. Lower shelf shall be made of MS CRCA steel with epoxy polyester powder coatingThe work shall be carried out as per the instructions received from engineer in charge.

NS-49 -'Providing and placing main desk with ERU size shall be 1650 Width x 700 Depth x 743 Height (Main Desk) 1000 Width X 450Depth X 743 Height (ERU).Top shall be of 18 mm thickness made of PLT board with 2 mm Edge banding. Wenge and savannah Maple PLT board shall be used. The Understructure shall be in pre-laminated panels made with PLT boards . 2- Drawerand 3 - Drawer storage units with different combinations to support tops made with 18 mm PLT boards of different colours.Modesty and back panels made with 18 mm PLT boards. The pedestals / storages shall be fitted with necessary locks.

NS-50 -'Providing and Placing High Back Chair with overall size of 76.1 cm W x 76.1 cm D x 112.7 – 130.2 cm H x 43.1 – 53.1 cm Seat Height. The seat is cushioned seat made of injection molded plastic outer & inner. Plastic inner is upholstered with leatherette and molded high resilience polyurethane foam of density 45±2 kg/m³, & hardness load of 16±2 kgf as per IS:7888 for 25% compression. Seat Size is 47.0 W cm x 48.0 D cm. The back is cushioned made of PU foam with insitu molded M.S. ERW round tube of size 1.9±0.03cm x 0.16±0.0128cm, upholstered with leatherette. The back size is 47.7 W cm x 76.4 D cm. The armrest top is molded from polyurethane and mounted on to a drop lift adjustable type tubular armrest support made of Ø3.81±0.03cm x 0.2±0.01cm thick M.S. ERW tube having chrome plated finish. The armrest is height adjustable up to 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism is designed with following features : 360° revolving type, front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort, tilt tension adjustment can be operated in seating position, 5-position tilt limiter giving option of variable tilt angle to the chair, Seat/back tilt ratio 1:2, The mechanism housing is made up of HPDC aluminium black powder coated. Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 6.0±0.5cm. Back frame is connected to the up/down mechanism in plastic T spine. It can be adjusted in the range of 7.42±0.5 comfort the comfortable back support to suit individual need. The pneumatic height adjustment has an adjustment stroke of 10.0±0.3cm. The pedestal is high pressure die cast polished aluminium & fitted with 5 nos. of twin wheel castors. The pedestal is 65.0±0.5cm pitch centre dia. (75.0±1.0cm with castors). 5 nos. of twin wheel castors are injection molded in plastic having 6.0±0.1cm wheel diameter and assembled to pedestal.

NS-51 -Supplying and placing desk whose size shall be 1500 Width mm x 750 Depth mm x 740 Height mm .Table top shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl) .Flat edge Duly sealed with 2 mm thick PVC beading.The modesty shall be 18 mm thick plain particle board ( ) PPB Clad with 1.0 mm thick decorative laminate (DL) on both sides. Edge Sealed with 2 mm thick PVC beading.ERU size shall be 1050 Width x 450 Depth x 705 Height. The top of ERU shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick Backing Laminate ( BDL).Flat Edge duly sealed with 2 mm thick PVC beading. The Modesty shall be 18 mm thick plain particle board (PPB) Clad with 1.0 mm thick Decorative Laminate (DL) on both sides. Edge sealed with 2 mm thick PVC Beading.

NS-52 -Supplying and placing mesh back chair whose Seat shall be made of 1.4cm thick hot pressed plywood upholstered with fabric and moulded Polyurethane foam. It shall have a seat depth adjustment of 5cm integrated in the seat through a sliding mechanism. Seat size shall be 50cm x 49cm. The back shall be injection moulded in Glass filled polyamide which shall be upholstered with Mesh fabric. The back consist of adjustable lumbar support shall be made of injection moulded polypropylene having an adjustment of 6cm. Back size shall be 50cm x 68cm. The Polyurethane foam for seat shall be of density 55 kg per meter cube. The three way adjustable armrests shall be made of glass filled polyamide arm structure with PU armtop and height adjustment of 7cm. The armtop shall have swivel and to and fro motion. The inner tube of armrest shall be chrome plated. It shall have center tilt synchro mechanism, 360 degree revolving type, 3 position locking system with anti-shock feature. The headrest shall be injection moulded in glass filled polypropylene which shall be upholstered with foam and fabric. The pneumatic height adjustment shall be chrome plated with an adjustment stroke of 9cm. The pedestal shall be injection moulded polyamide and fitted with 5 nos. of twin wheel castors. The pedestal shall be 65cm PCD. The overall dimension of the chair shall be 75cm x 75cm x (100-109cm). Seat height shall be 44.5cm to 53.5cm. This shall come with sliding seat, which helps user adjusting the seat depth as per the user size and needs.

NS-53 -'Supplying and placing Conference Table With Wire Manager size shall be 29 seater 760 Width mm x 600 Depth mm , Two seater 1360 Width mm x 600 Depth mm , Half Round (2 Seater ) R 713 + Quarter Round ( 1 Seater ) R 713 . The top shall be 30.8 mm thick (18 mm + 12 mm + 0.6 mm DL ( both sides ) + 0.4 mm Membrane ) Edge Profile shall be waterfall edge 10 mm radius on top edge and 5 mm at bottom . In Understructure the Legs shall be made from 25 mm PPB having a straight profile with half round edges and clad with 0.6 mm thick post Forming laminate . Overall thickness of leg shall be 26.2 mm The modesty panel in understructure shall be mae from PLT ( Pre laminated twin) boards of 18 mm thick . There shall be Wire Management wire carrier shall be made from 0.6 mm thick CRCA painted and carrier cover shall be made of 12 mm thick MDF painted all over.

NS-54 -Supplying and placing Conference Table With Wire Manager size shall be 17 seater 760 Width mm x 600 Depth mm , Two seater 1360 Width mm x 600 Depth mm , Half Round (2 Seater ) R 713 + Quarter Round ( 1 Seater ) R 713 . The top shall be 30.8 mm thick (18 mm + 12 mm + 0.6 mm DL ( both sides ) + 0.4 mm Membrane ) Edge Profile shall be waterfall edge 10 mm radius on top edge and 5 mm at bottom . In Understructure the Legs shall be made from 25 mm PPB having a straight profile with half round edges and clad with 0.6 mm thick post Forming laminate . Overall thickness of leg shall be 26.2 mm The modesty panel in understructure shall be mae from PLT ( Pre laminated twin) boards of 18 mm thick . There shall be Wire Management wire carrier shall be made from 0.6 mm thick CRCA painted and carrier cover shall be made of 12 mm thick MDF painted all over.

NS-55 -'Providing and placing 8 Seater conference table whose size shall be 2400 Width mm x 1200 Depth mm x 750 Height mm . Top shall be 32 mm thick base material shall be 18 plus 12 mm MDF board 0.4 mm PVC membrane foil using wrap around technology . The foil is pre- coated with PU layer for better scratch and wear resistant plus 0.6 mm balancing laminate on bottom surface . The veil and cross member shall be 18 mm thick base material shall be 16 mm plain particle board post laminated with 0.6 mm top laminate on either side plus 2 mm thick and 0.8 mm thick PVC edge banding . The legs shall be made from 1.6 mm matt silver anodized aluminium extrusion .Legs assembeled together with a plastic glide holder at bottom and 5 mm thick MS powder coated sheet at top . Also there shall be accessflap and switch mounting tray made from matt anodized aluminium extrusion .

NS-56 - Providing and placing mid back chair of following specification. The seat and back shall be made up of 1.2 ±0.1cm. thick hot-pressed plywood and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam shall be designed with contoured lumbar support for extra comfort. The seat shall be extra thick foam on front edge to give comfort to popliteal area. The dimensions of back shall be 47.5 cm(W) x 58.0 cm(H) and of seat shall be 47.0 cm (W) x 48.0 cm (D). The HR polyurethane foam shall be moulded with density= 45±2 kg/m3 and hardness load 16 ± 2 kgf as. per IS:7888 for 25% compression. The one-piece armrests shall be injection moulded from black Co.polymer Polypropylene. The mechanism shall be designed with 360° revolving type, Upright-position locking, Tilt tension adjustment, Seat/back tilting ratio of 1:3. The pneumatic height adjustment shall has an adjustment stroke of 12.0 ±0.3cm. The bellow shall be 3 piece telescopic type and injection moulded in black Polypropylene. The pedestal shall be injection moulded in black 33% glass-filled Nylon-66 and fitted with 5 nos. twin wheel castors. The pedestal shall be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors). The twin wheel castors shall be injection moulded in Black Nylon. Overall Dimensions of Chair shall be Seat Height - min 42.5 to max 54.5cm, Height - min85.5 to max 97.5cm, Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm.

NS-57 -The system shall be a desk-based system with a platform understructure made up of a combination of MS. Tubes and plates.Understructure - The straight legs are connected to the understructure with the help of PDC Connectors to provide a stable and sturdy base for the worktops. Modesty panel shall be of Metal 1.2 mm thick CRCA. Worktop - Worktop shall be made of 25MM thick Pre-Laminated Board conforming to IS: 12823. All the edges of work surface shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. The worktop shall be complete with provisions for screen mounting as well as for wire management on the workstation. Provisions for fixing of the switches shall be on the wire tray/channel. Access flaps with soft closing technology shall be provided on the table tops to access the switch points on the tray. Rectangular worktop of size 1200mm W x 600mm D 90 deg with partial extrusion screen along width. Partial Screen - 19 mm thk t-mold screens with fabric finish are provided. The screens provided shall be complete with its set of PDC clamps for fixing on the worktop. Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. It shall have CPU trolly and Keyboard tray

NS-58 - Supplying and placing main whose Desk size shall be 1200 Width x 600 Depth x 750 Height.The Top shall be in white cedar and black and shall be 18 mm PLB with PVC lipping.The side panels shall be 18 mm thickPLT with PVC .The Modesty panel shall be 18 mm thick PLT.The Modesty panel shall be in a combination of black & white cedar.ERU size shall be 900 Width x 450 Depth x 750 Height.The top of ERU shall be 18 mm thick PLT with PVC lipping.The feature of ERU shall be thait is common for both LHS nd RHS. The colour of ERU top shall be white cedar , side panels shall be in black and the Modesty panel shall be a combination of black & white colour.Pedestal size shall be 390 Width x 435 Depth x 529 Height.The top is 18 mm thick PLB . The two drawer mobile pedestal is available in one size .The top and drawer fronts shall be in white cedar while the other components shall be in black.

NS-59 -Supplying and placing desk whose size shall be 1200 Width x 600 Depth x 740 Height . The top shall be made from 25 mm thick pre- laminated board . All the edges are sealed with 2 mm thick PVC edge band all around . Side panels shall be made from 25 mm thick pre- laminated paticle board . All the edges are sealed with 2 mm thick PVC edge band on the user side and 0.8 mm on the top and bottom side .The side panels have 2 glide screws each for levelling of the desk. Modesty panel shall be made from 18 mm thick pre- laminated particle board . All the edges are sealed with 0.8 mm thick PVC edge band all around. Freestanding Pedestal shall be made from 18 mm pre- laminated particle board with a combination of 2 mm and 0.8 mm PVC edge band on all the exposed surfaces as per requirement . The drawers are provided with suitable slides for smooth operation . All the pedestal drawers are centrally locked with a single key .

NS-60 -'Supplying and placing 6 Seater PU Coated dining table whose size shall be 1734 Width mm x 1175 Depth mm x 750 Height mm . Top shall be 25 mm thick base material shall be 25 mm MDF board . On top PU painting of minimum 2H hardness with 75% glass as per color chart .Combination color graphics on the centre . Brown Laminate on bottom specially profiled edges for comfort . The Understructure shall be having bend pipe structure of MS powder coated . Pipe dia 38 mm , 2 mm thick and it shall be fitted with top by SS machine screws . Legs shall be of MS powder coated and 38 mm dia. pipe legs are fixed with inderstructure and table top . Glide shall be of Plastic fixed at the understructure to prevent the damage of table top during stacking .

NS-61 -Providing and placing canteen chair whose seat and Back shall be made up of injection moulded high impact strength PolyPropylene polymer compound with indoor grade UV resistance. Seat size shall be 52.5cm x 53.2cm. Back size shall be 51.6cm x 40.5cm. The tubular welded frame shall be made of dia. 2.22cm x 0.12cm and 3.5cm x 1.5cm x 0.12cm stainless steel 202 grade tube. The tubes shall be buff polished to give shiny finish. The shoes and Amrest shall be made of high impacy strength PolyPropylene polyemr compound with indoor grade UV resistance and pressed and press fitted with tubular frame. The overall dimensions of the chair shall be 52.4cm x 55.8cm x 84.5cm. The seating height shall be 45.0cm.

NS-62 -Supplying and placing cupboard of the following specifications. The overall Size including top cornice shall be : Width - 946.0 mm Depth - 598.0 mm Height - 1941.0 mm. Material : Body panels are made of 18 mm thick Prelaminated Particle Board. All the exposed edges are edge banded with 0.8 mm thick PVC edge banding. Door are made of 18 mm thick Prelaminated Particle board with all the exposed edges are edge banded with 0.8 mm thick PVC edge banding. Side panel are made of 18 mm thick Prelaminated Particle board with all the exposed edges are edge banded with 0.8 mm thick PVC edge banding and with imported H.D.F. foil wrapped decorative trim fixed on to it. Drawer components are made of 18 mm thick Prelaminated Particle Board .All the exposed edges are edge banded with 0.8 mm thick PVC edge banding. Body back and drawer bottom are made of 8 mm thick Prelaminated particle board. Top cornice is made of imported H.D.F. foil wrapped decorative Trim. Mirror used on the door is 4 mm thick. Hardware : The high quality hardware used like Roller slides, Hinges , minifix, wooden dowels is of make Hettich.. Lock used for main door is 3 way lock and lock used for drawer is cam lock Construction : Knock Down construction. Finish :. 18 mm thick Prelaminated Particle Board is in Walnut shade.

NS-63 -'Supplying and Placing in place of 2 seater sofa. The overall dimensions of the sofa shall be 1460W x 905D x 855H. The seat should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. It should be a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap

NS-64 -'Supplying and Placing in place of 3 seater sofa. The overall dimensions of the sofa shall be 2060W x 905D x 855H. The seat should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. It should be a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap.

NS-65 -Supplying and placing centre table whose Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shall be a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions of table shall be Width of table= 112.0 cm, Depth=60.0 cm, height=35.1 cm.

NS-66 -'Supplying and placing side table whose glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shall be a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions of table shall be Width of table= 60.0 cm, Depth=60.0 cm, height=35.1 cm.

NS-67 -'4 Seater Round POD 1050 Dia size shall be 1050 dia x 750 . Top shall be 25 mm thick base material shall be 25 mm thick MDF board .0.4 mm PVC membrane foil using wrap technology . The foil shall be pre- coated with PU layer for better scratch and wear resistant . 0.6 mm balancing laminate on bottom surface . The vertical cladding shall be 18 mm thick base material shall be 18 mm MDF board . 0.4 mm PVC membrane foil using wrap technology . The foil shall be pre- coated with PU layer for better scratch and wear resistant . 0.6 mm balancing laminate on bottom surface . Legs and Top /Bottom plate shall be made from 1.6 mm Matt silver Anodized Aluminium extrusion . Legs Assembeled together with 8 mm thick MS powder coated sheet at bottom and 3 mm thick MS powder sheet coated at the top . The MS base shall be having provision for wire entry and glide fixing . Access Flap and Switch Mounting Tray made from matt silver anodized aluminium extrusion and plastic moulded components to facilitate access of electrical / data / voice sockets access frokm top .

NS-68 -The system shall be a desk-based system with a platform understructure made up of a combination of MS. Tubes and plates.The slanted legs with perforated metal modesty in between are connected to the understructure with the help of PDC Connectors to provide a stable and sturdy base for the worktops. Modesty panel shall be of Metal 1.2 mm thick CRCA. Worktop shall be made of 25MM thick Pre-Laminated Board conforming to IS: 12823. All the edges of work surface shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. The worktop shall be complete with provisions for screen mounting as well as for wire management on the workstation. Provisions for fixing of the switches shall be on the wire tray/channel. Access flaps with soft closing technology shall be provided on the table tops to access the switch points on the tray. Rectangular worktop of size 1500mm W x 750mm D 90 deg with partial extrusion screen along width.

NS-69 - Providing and placing spine and fin based modular workstation, with partition thickness as 52.4 mm thk and ht - 1200 including powder coated aluminium trims. Combination of top tiles are fabric magneitc/fabric/fabric tackable/white board tile. Bottom tiles - Plain metal. Intermediate blocks are given in DL + DL finish. Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. worksurface out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 900 mm w x 600 mm d. It shall have CPU trolly and keyboard tray

NS-70 - 'Supplying and placing Storage unit whose overall size shall be 900mm (W) X 460mm (D) X 750mm (H). Construction shall be of 24mm and 18mm thick PLB with metal cladding of 0.8mm thick CRCA from outside. Side metal cladding shall be coated with epoxy polyester powder coating of 50+-10 microns thickness. 11mm thick Metal top shall be made up of CRCA and shall be coated with epoxy polyester powder coating of 50+-10 microns thickness. Doors shall be made up of 18mm thick PLB with decorative laminate on one side and backing laminate on other side. Back panels shall be made up of 18mm thick PLB . 3-way nickle plated wooden furnituire lock shall be provided. Handles shall be made up of aluminium.

NS-71 - Supplying and placing of bed of the following speciications. The overall size of the bed should be 1131mm (W) x 2060mm (L) x 930mm (H) x . Bed structure should consist of metal frames made of M.S. Channels in 1.0 mm Thickness. Bed shall be made of 18 mm thick Prelaminated Particle Board with all the exposed edges are edge banded with 0.8 mm thck PVC edge banding. 18mm thck Prelaminated Particle Board in Walnut Shade. Metals frames should be powder coating in shade Mat Black to the Thickness of 50 microns (+ - 10). The bed shall be provided with one coir matteress of 4 inch thickness. The work shall be carried out as per the instructions received from engineer in charge.

NS-72 - Body and drawer panels of Bed side table are made of 18 mm thick Prelaminated Particle Board. All the exposed edges are edge banded with 0.8 mm thick PVC edge banding. Side panels are made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trim fixed on to it

NS-73 - 'Providing and placing desk whose size shall be 1200 Width mm x 600 Depth mm x 750 Height mm . Table top shall be 18 mm PPB with 35 KGS , shelf shall be 12.5 KGS drawer shall be 506 KGS. The table top shall be 18 mm prelam particle board , 3 mm prelam MDF board. Metal parts shall be BM Slide For Keyboard plus castor mounting table plus locking bracket plus angle clit . Hardware shall be Screw , KD fitting , Wooden Dowel , PVC ibserts. Construction shall be KD fitting , Wooden dowel & Angle Clit.

NS-74 -'Supplying and placing Chair of overall size 550mm (W) X 575mm (D) X 770mm (H). Seat height shall be 460mm. Thickness of plywood used shall be 12mm.Seat foam thickness shall be 60mm and density shall be 24.5 kg/m3. Back foam thickness shall be 45mm and density shall be 24.5 kg/m3

NS-75 -'Supplying and placing of bed of the following speciications. The overall size of the bed should be 1733mm (W) x 2060mm (L) x 930mm (H) x . Bed structure should consist of metal frames made of M.S. Channels in 1.0 mm Thickness. Bed shall be made of 18 mm thick Prelaminated Particle Board with all the exposed edges are edge banded with 0.8 mm thck PVC edge banding. 18mm thck Prelaminated Particle Board in Walnut Shade. Metals frames should be powder coating in shade Mat Black to the Thickness of 50 microns (+ - 10). The bed shall be provided with one coir matteress of 4 inch thickness.The work shall be carried out as per the instructions received from engineer in charge.

NS-76 - 'Supplying &placing in position Center Table of following specifications. Wooden Tea table having SOLID VENEER MDF TABLE TOP WITH 18 mm thickness and Solid rubber wood legs. Dimensions: 1200 x 600 x 378

NS-77 - 'Supplying &placing in position Center Table of following specifications. Wooden Tea table having SOLID VENEER MDF TABLE TOP WITH 18 mm thickness and Solid rubber wood legs. Dimensions: 530 x 450 x 458

NS-78 - 'Supplying & Placing 6 Seater Dining Table of overall dimensons 1500 x 900 x 760. Material: Wooden Derivative. Table Top : MDF with Okume Veneer. Table Legs : Solid Wood. Finish: Veneer finish. Thickness: 19 mm for Table top. Colour: Brownish Black Design: Rectangular table with L shaped Legs. Seating Capacity: 6 seater

NS-79 -'Supplying & Plcing dining Chair of Complete Solid Rubber Wood Coating: PU coated Upholstery: PVC Colour: Dark Coffee Design: Sleek & contemporary look with Hi-Back support Comfort: Ultra comfort as cushion on Seat & Back. Seating Height 480 mm.

Schedule - ( C ) Bill of Quantites for Electrical Items (NS Items)

NS-80 - Supply and fixing 6 Module GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 Nos 5/6 pin 15/16 amps modular socket outlet and 2 Nos 15/16 amps modular switch, connection etc. as required.

FANS & LIGHT FIXTURES

NS-81 -'Supplying, installation, testing & Commissioning of recessed type LED Panel Fitting of 33W to 36W, size 595mm x595mm, color temperature 5700K-6500K with full window glarefree opal diffuser & MS Powder coated White Housing & suitable rating LED driver etc in the existing false ceiling with the help of steel chain approx 1mtr x 2 nos i/c supplying & fixing MS flexible conduit from light point to fittings and connections with 3x1.5sqmm copper wire etc complete as required & as per terms & condition & technical specification attached ( Wipro cat ref: CRCO10R038HP57GL or equivalent)

NS-82 - Supplying, fixing, connecting, testing and commissioning of 1x10 watt square LED light fixture with electronic ballast, mounts to support the ballast or with integral ballast, suitable lengths of prewired connection between ballast and light fixture, diffuser, suitable mounts, suspension cables complete as required similar to Wipro Cat Ref: LD95-141-XXX-60-XX or equivalent

NS-83 - Supplying, installation, testing & Commissioning of 9W energy efficient LED bulkhead luminarie with pressure die-cast aluminium housing & heat sinkg of color temperature 6500K with suitable rating LED driver etc on the existing ceiling surface including connections with 3x1.5sqmm copper wire etc as required & as per terms & condition & technical specification attached. (WIPRO Cat Ref: LW07-141-XXX-57-G1 or equivalent)

NS-84 - 'Supplying, installation, testing & Commissioning of Surface/Wall Mounted 1X28W MS Batten Box type Fitting 4 feet long with 1 No 18/20Watt Polycarbonate LED Tube of colour temperature (5700- 6500 K) complying with technical specification & terms & condition attached, complete with all accessories i/c connection with 3 X 1.5 sq mm FRLS copper wire complete as reqd. (Wipro cat ref: WIO921208+LL13-181-650 or equivalent)

NS-85 - 'Supplying, installation, testing & Commissioning of 15W energy efficient recess type round shaped LED downlighter fitting of minium cut out dia 138mm with pressure die-cast aluminium housing & heat sink, suitable rating LED driver etc on the existing ceiling surface including connections with 3x1.5sqmm copper wire etc as required & as per terms & condition & technical specification attached. (WIPRO Cat Ref: LD80-131-XXX-60-XX or equivalent)

NS-86 - 'Supplying of surface/recessed type LED down-lighter with high efficiency white reflector and high transmissive diffuser ,fitting complete with, holder, driver, heat sink and LED (less than 10% THD), low depth with die cast aluminium housing 1 x 12W LED with CRI >70, including with driver connections etc. as required. (WIPRO Cat Ref: LD90-141-XXX-65-XX or equivalent)

NS-87 - 'Supplying, installation, testing & Commissioning of 1x8/9Watt mirror light LED fitting 2 ft long on the existing wall along (color temperature 3000-6500K as required) complying with the technical specifications & terms & conditions attached complete with all accessories i/c connection with 3x1.5sqmm FRLS copper wire as reqd i/c dismantling of the existing fitting. (WIPRO Cat Ref: LL20-111-XXX-65NE3 or equivalent)

NS-88 - Supplying, erection, connecting, testing and commissioning of wall bracket fan 400 mm sweep with step speed regulator complete as required.

NS-89 - 'Supplying, erection, connecting, testing and commissioning of following size heavy duty exhaust fan complete with gravity louver and connection with 3 core flexible wire as required.

200 mm dia fresh air fan

NS-90 - 'Supply, installation, connecting, testing and commissioning of illuminated exit sign with 1 x 3 watt LED lamp including providing maintenance free batteries & charger capable of working for 2 hr duration mounted on ceiling/wall complete with the approved EXIT self adhesive labels as per site requirement as required.

LT Panels

NS-91 - 'Supplying, installation, testing and commissioning of cubical type MV Panel as per IEC:61439-I made out of 14 SWG sheet steel, totally enclosed IP-54 protection, free standing, floor mounted dust and vermin proof, indoor type compartmentalized powder coated of approved shade after antirust treatment (with min seven tanks ) suitable with busbar interconnection with suitable size of copper lead/solid Aluminium strips, control circuits & bottom base channel of MS section not less than 100mmx50mmx5mm (thick), Fabrication shall be done in transportable section ,entire panel shall have a common earth busbar at rear with 2 nos earth stud cable alleys, cable gland plates in two half as required as per single line diagram & specification enclosed with the following switchgears.(MDB FLOOR PANEL )

INCOMER:-

1 Nos.125 Amps. TPN MCCB (35 KA) with electronic releases.

1 Set phase indication lights (R, Y, B)

1 No. Volt Meter (digital type) with inbuilt VSS & control fuses.

1 No. 0-125 Amp. Ammeter (digital type) with inbuilt ASS

BUS BARS:-

125 Amps. TP&N aluminium bus bars (35 KA)

OUT GOINGS:-

3 Nos 63A TPN, MCCB For LPDB

2 Nos 63A TPN, MCCB Spare

NS-92 - 'Supplying, installation, testing and commissioning of cubical type MV Panel as per IEC:61439-I made out of 14 SWG sheet steel, totally enclosed IP-54 protection, free standing, floor mounted dust and vermin proof, indoor type compartmentalized powder coated of approved shade after antirust treatment (with min seven tanks ) suitable with busbar interconnection with suitable size of copper lead/solid Aluminium strips, control circuits & bottom base channel of MS section not less than 100mmx50mmx5mm (thick), Fabrication shall be done in transportable section ,entire panel shall have a common earth busbar at rear with 2 nos earth stud cable alleys, cable gland plates in two half as required as per single line diagram & specification enclosed with the following switchgears.( HVAC PANEL )

INCOMER:-

1 Nos.630 Amps. TPN MCCB (50 KA) with electronic releases.

1 Set phase indication lights (R, Y, B)

1 No. Volt Meter (digital type) with inbuilt VSS & control fuses.

1 No. 0-630 Amp. Ammeter (digital type) with inbuilt ASS

BUS BARS:-

800 Amps. TP&N aluminium bus bars (35 KA)

OUT GOINGS:-

8 Nos. 63A TPN, MCCB For ODU

2 Nos. 63A TPN, MCCB Spare

NS-93 - 'Supplying, installation, testing and commissioning of cubical type MV Panel as per IEC:61439-I made out of 14 SWG sheet steel, totally enclosed IP-54 protection, free standing, floor mounted dust and vermin proof, indoor type compartmentalized powder coated of approved shade after antirust treatment (with min seven tanks ) suitable with busbar interconnection with suitable size of copper lead/solid Aluminium strips, control circuits & bottom base channel of MS section not less than 100mmx50mmx5mm (thick), Fabrication shall be done in transportable section ,entire panel shall have a common earth busbar at rear with 2 nos earth stud cable alleys, cable gland plates in two half as required as per single line diagram & specification enclosed with the following switchgears.(Plumbing Panel )

INCOMER:-

1 Nos.100 Amps. TPN MCCB (35 KA) with electronic releases.

1 Set phase indication lights (R, Y, B)

1 No. Volt Meter (digital type) with inbuilt VSS & control fuses.

1 No. 0-100 Amp. Ammeter (digital type) with inbuilt ASS

BUS BARS:-

200 Amps. TP&N aluminium bus bars (35 KA)

OUT GOINGS:-

5 Nos.63A TPN, MCB

2 Nos. 32A TPN, MCB

2 Nos. 25A TPN, MCB

3 Nos. 63A TPN, MCB Spare

NS-94 - 'Supplying, installation, testing and commissioning of cubical type MV Panel as per IEC:61439-I made out of 14 SWG sheet steel, totally enclosed IP-54 protection, free standing, floor mounted dust and vermin proof, indoor type compartmentalized powder coated of approved shade after antirust treatment (with min seven tanks ) suitable with busbar interconnection with suitable size of copper lead/solid Aluminium strips, control circuits & bottom base channel of MS section not less than 100mmx50mmx5mm (thick), Fabrication shall be done in transportable section ,entire panel shall have a common earth busbar at rear with 2 nos earth stud cable alleys, cable gland plates in two half as required as per single line diagram & specification enclosed with the following switchgears.(Water Supply Panel )

INCOMER:-

1 Nos.100 Amps. TPN MCCB (35 KA) with electronic releases.

1 Set phase indication lights (R, Y, B)

1 No. Volt Meter (digital type) with inbuilt VSS & control fuses.

1 No. 0-100 Amp. Ammeter (digital type) with inbuilt ASS

BUS BARS:-

200 Amps. TP&N aluminium bus bars (35 KA)

OUT GOINGS:-

4 Nos.63A TPN, MCB

2 Nos. 40A TPN, MCB

4 Nos. 25A TPN, MCB Spare

NS-95 - 'Supplying, installation, testing and commissioning of cubical type MV Panel as per IEC:61439-I made out of 14 SWG sheet steel, totally enclosed IP-54 protection, free standing, floor mounted dust and vermin proof, indoor type compartmentalized powder coated of approved shade after antirust treatment (with min seven tanks ) suitable with busbar interconnection with suitable size of copper lead/solid Aluminium strips, control circuits & bottom base channel of MS section not less than 100mmx50mmx5mm (thick), Fabrication shall be done in transportable section ,entire panel shall have a common earth busbar at rear with 2 nos earth stud cable alleys, cable gland plates in two half as required as per single line diagram & specification enclosed with the following switchgears.(Firefighting Panel )

INCOMER:-

1 Nos.160 Amps. TPN MCCB (35 KA) with electronic releases.

1 Set phase indication lights (R, Y, B)

1 No. Volt Meter (digital type) with inbuilt VSS & control fuses.

1 No. 0-160 Amp. Ammeter (digital type) with inbuilt ASS

BUS BARS:-

200 Amps. TP&N aluminium bus bars (35 KA)

OUT GOINGS:-

4 Nos.100A TPN, MCB

2 Nos. 25A TPN, MCB

2 Nos. 100A TPN, MCB Spare

2 Nos. 25A TPN, MCB Spare

NS-96 - 'Supplying, installation, testing and commissioning of cubical type MV Panel as per IEC:61439-I made out of 14 SWG sheet steel, totally enclosed IP-54 protection, free standing, floor mounted dust and vermin proof, indoor type compartmentalized powder coated of approved shade after antirust treatment (with min seven tanks ) suitable with busbar interconnection with suitable size of copper lead/solid Aluminium strips, control circuits & bottom base channel of MS section not less than 100mmx50mmx5mm (thick), Fabrication shall be done in transportable section ,entire panel shall have a common earth busbar at rear with 2 nos earth stud cable alleys, cable gland plates in two half as required as per single line diagram & specification enclosed with the following switchgears. (MAIN UPS PANEL )

INCOMER:-

2 Nos.100 Amps. FP MCCB (25 KA) with electronic releases.

1 Set phase indication lights (R, Y, B)

1 No. Volt Meter (digital type) with inbuilt VSS & control fuses.

1 No. 0-63 Amp. Ammeter (digital type) with inbuilt ASS

BUS BARS:-

100 Amps. TP&N aluminium bus bars (35 KA)

OUT GOINGS:-

12 Nos+ (2 Nos Spare ) 63A FP, MCCB

LT Cables

NS-97 - 'Supply, laying of following size XLPE (FRLS) insulated outer sheathed (1100 V grade) aluminum armoured conductor cable (with ROHS compliance if any) conforming to relevant IS code, partly laid in existing cable tray and partly laid in wall/ ceiling with suitable clamps or in ground including trench.

NS-97.1 - '3.5 x 300 sq.mm

NS-97.2 - '3.5 x 185 sq.mm

NS-97.3 - '3.5 x 50 sq.mm

NS-97.4 - '3.5 x 35 sq.mm

NS-97.5 - '4 x 25 sq.mm

NS-97.6 - '4 x 16 sq.mm

NS-97.7 - '4 x 10 sq.mm

Raceways

NS-98 - 'Fabricating supply, installation on ceiling/ surface/floor 2.0 mm thick GI raceways of height 38 mm and 2.0 mm thick openable cover, totally enclosed, the joints between two lengths of channels or between channel and junction box shall be joined together with 3 mm thick GI coupler plates to make it dust and water proof. The cost shall including all supporting and fixing accessories including dash fasteners. ( Orange colour for data and Blue colour for power)

NS-98.1 - '250 mm (wide) x 38 mm (height)

NS-98.2 - '150 mm (wide) x 38 mm (height)

NS-98.3 - '100 mm (wide) x 38 mm (height)

NS-99 - 'Fabricating, supply, installation, of Junction boxes for raceways made from 2 mm thick , with 2.5 mm thick G.I. cover including providing neoprene gaskets between the cover and the junction box, cadmium plated flat/round head screws, height as per site condition,totally enclosed. Proper cutouts shall be made in the side walls for raceway entry wherever required. The junction box shall be all side walls should be welded expect top cover and all side walls shall have suitable size of rectangular knock out holes for taking raceways / conduits as required and not a complete cut out. The top cover should be sealed with M Seal to make it dust and water proof complete as required etc.

NS-99.1 - '300 mm x 300 x 38 mm (height)

NS-99.2 - '200 mm x 200 x 38 mm (height)

NS-99.3 - '150 mm x 150 x 38 mm (height)

NS-100 - 'T.V. & TELEPHONE SYSTEM & LAN SYSTEM

NS-100.1 -'100 Pair telephone cable

NS-100.2 -'50 Pair telephone cable

NS-100.3 -'20 Pair telephone cable

NS-100.4 -'10 Pair telephone cable

NS-100.5 -'5 Pair telephone cable

NS-101 - 'Providing, fixing connecting and testing of under noted size of solderless telephone tag block in surface/recess in wall required size of M.S. box with hinged lockable cover duly stove enamel painted.

NS-101.1 - '100 pair tag block

NS-101.2 - '50 pair tag block

NS-101.3 - '30 pair tag block

NS-101.4 - '5 pair tag block

UPS System

NS-102 - 'Supply,installation, testing & commissioning of micro processor /DSP controlled 60 KVA UPS in Parallel with IGBT based rectifier to achieve THDI < 2% for linear load and < 3% for non linear load, with 15 mins backup, battery racks,circuit breaker, input power factor of greater than 0.99 at 100% loading, output power factor .8 and efficiency should be 92% minimum with True Online Double Conversion (VFI as per IEC 62040-3) UPS using PWM IGBT technology on charger and inverter section, with galvanic isolation transformer connected at output end, Three Phase input and Three phase output UPS system with networking Network Management Ethernet Card along-with software for SNMP / Web-based monitoring of UPS, Remote UPS Control, IBMS compatible, logging & reporting of UPS data and all interconnection cabling and as per specifications as required.

CCTV System

NS-103 - 'Supply, installation, connecting ,testing and commissioning of the following components for IP- CCTV system complete as required

NS-103.1 - '1/2.7" CMOS Vandal-proof, True Day/Night, Network Dome IP Camera , Picture Elements 1080p (1920 x1080 pixels), Resolution 1080p / 720p / VGA, 30 FPS (All Resolutions) ,True Day/Night with Removable IR Cut Filter, IR Illuminator (25 Meter Max Effective Range) 850nm, Minimum Illumination 0.0001 (0.0 With IR Illumination), 3D DNR, True WDR (120db), Compression( H.264 & H.265), Bandwidth Configurable , 12 VDC ± 10%, PoE, Max Streams -3, Gain Control AGC, White Balance Auto / Manual / ATW, Backlight Compensation On/Off, with fixed lens between (2.8 - 9mm), Standard IP67 IK10, ONVIF supported

NS-103.2 - '1/2.7" CMOS IP PTZ Camera outdoor type , Picture Elements 1080p (1920 x 1080 pixels), Resolution 1080p / 720p / VGA, 30 FPS (All Resolutions) ,True Day/Night with Removable IR Cut Filter, IR Illuminator (25 Meter Max Effective Range) 850nm, Minimum Illumination 0.0001 (0.0 With IR Illumination), Dynamic Range 69dB, Compression( H.264, MJPEG), Bandwidth Configurable , Max Streams -4, Gain Control AGC, White Balance Auto / Manual / ATW , Backlight Compensation On/Off,3-9mm Vari focal.

NS-104 - 'Professional Video management and recording software and hardware comprising 64Ch. NVR to record output of all cameras mentioned above Third-party network cameras supported, H.264, H.265 Compression - Up to 12 Megapixels resolution recording, multiple Hard Disk 8 SATA with each having maximum storage capacity of 8 TB , as required for minimum 30 days recording required for recording when in 80% motion @ 1080p 25 Frames per second(Real Time) or for recording when not in motion @1080 15 Frames per second, 10/100/1000 MBps network interface with each NVR, 2 USB2.0, HTTP Networkable, backup by USB/DVDWR, required Client software included, Powerful E-map based monitoring, Remote PTZ control and power area zoom, Support for various search and playback options : date and time based search : event (alarm, motion, intelligent video) based search: normal playback, backward playback, fast/slow playback, step playback , Notification in case of event occurring : highlighting in the border of video window : display event log message in real time, Back up capability : manual back up: AVI, REC1, SEC format, Multi-level user access and authority management , Support for multi-language user interface, Automatic search of network cameras for quick and easy configuration, Easy device management (configuration, firmware upgrade), inputs to ibms system complete as required.

NS-105 - 'Special Surveillance HDD for NVR- 8TB

NS-106 - 'L2 24 Port Network Switch with PoE

NS-107 - 'Wall mounted 6U closed racks with power supply complete as required for the network racks

NS-108 - 'Supply , laying, terminating, testing of cat-6 cable in FRLS existing PVC conduits

NS-109 - 'ESB (Extended Surveillance Box) for monitoring of CCTV, Display (1 / 4 / 9 / 16 split) maximum up to 64 cameras in Each and all accessories complete as required.

NS-110 - 'Supply, installation, testing and commissioning of color high resolution LED monitor of comprising of 1 nos. 32 inch display complete with all supports, accessories.

NS-111 - 'RJ-45 outlets near the cameras

NS-112 - 'Media Converter SM/SFP Module

NS-113 - 'LIU to Media converter connectivity.

NS-114 - '8 port loaded fiber LIU box with pigtails and couplers

Air Conditioning System

NS-115 - 'Supply, installation, testing and commissioning Digital Inverter- Wall mounted split Unit Capacity of 1.8/2.0 TR. The Indoor unit shall comprise of Blowers, Cooling Coil, Filter and Expansion device and drain pan. The outdoor unit shall comprise of digital Inverter compressor, air cooled condenser fans. Rate inclisive of required standard length copper piping with 13mm thick nitrile rubber insulation, voltage stabilizer, refrigerent, charging, power cable from from the panel/isolator, control cable, wireless remote controller, support/stand for indoor and outdoor unit etc.

NS-116 - 'Supply and laying of 3X2.5 sqmm copper cable FRLS XLPE insulated

NS-117 - 'Extra for Supply and installation of PVC Drain pipe with insulation complete as required

NS-118 - 'Extra for Supply and installation of copper pipe with insulation complete as required

NS-119 - 'Supplying and fixing of four pole, 415 V, 63 Amp. MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required

Bidder Name

Amount

SANJEEV FURNISHERS PVT LTD(GSTN-NA)

SUNEHARI BAGH BUILDERS PVT. LTD.(GSTN-NA)

GARG BUILDERS(GSTN-NA)

N S Associates Pvt Ltd.(GSTN-NA)

PUJA CONSTRUCTION COMPANY(GSTN-NA)

ULTIMATE INTERNATIONAL PVT.LTD.(GSTN-NA)

Quazar Infrastructure Private Limited(GSTN-NA)

MANNU LAL AND SONS(GSTN-NA)

woodfun Interior decorators(GSTN-NA)

M/s. JYOTI SARUP MITTAL(GSTN-NA)

Bidder Name

Amount

SANJEEV FURNISHERS PVT LTD(GSTN-NA)

SUNEHARI BAGH BUILDERS PVT. LTD.(GSTN-NA)

GARG BUILDERS(GSTN-NA)

N S Associates Pvt Ltd.(GSTN-NA)

PUJA CONSTRUCTION COMPANY(GSTN-NA)

ULTIMATE INTERNATIONAL PVT.LTD.(GSTN-NA)

Quazar Infrastructure Private Limited(GSTN-NA)

MANNU LAL AND SONS(GSTN-NA)

woodfun Interior decorators(GSTN-NA)

M/s. JYOTI SARUP MITTAL(GSTN-NA)

SANJEEV FURNISHERS PVT LTD

woodfun Interior decorators

Quazar Infrastructure Private Limited

M/s. JYOTI SARUP MITTAL

GARG BUILDERS

SUNEHARI BAGH BUILDERS PVT. LTD.

PUJA CONSTRUCTION COMPANY

MANNU LAL AND SONS

ULTIMATE INTERNATIONAL PVT.LTD.

SANJEEV FURNISHERS PVT LTD

woodfun Interior decorators

Quazar Infrastructure Private Limited

GARG BUILDERS

M/s. JYOTI SARUP MITTAL

SUNEHARI BAGH BUILDERS PVT. LTD.

PUJA CONSTRUCTION COMPANY

MANNU LAL AND SONS

ULTIMATE INTERNATIONAL PVT.LTD.

N S Associates Pvt Ltd.

woodfun Interior decorators

Quazar Infrastructure Private Limited

GARG BUILDERS

MANNU LAL AND SONS

M/s. JYOTI SARUP MITTAL

SUNEHARI BAGH BUILDERS PVT. LTD.

PUJA CONSTRUCTION COMPANY

ULTIMATE INTERNATIONAL PVT.LTD.

Quazar Infrastructure Private Limited

woodfun Interior decorators

GARG BUILDERS

N S Associates Pvt Ltd.

SUNEHARI BAGH BUILDERS PVT. LTD.

PUJA CONSTRUCTION COMPANY

SANJEEV FURNISHERS PVT LTD

MANNU LAL AND SONS

ULTIMATE INTERNATIONAL PVT.LTD.

woodfun Interior decorators

Quazar Infrastructure Private Limited

N S Associates Pvt Ltd.

M/s. JYOTI SARUP MITTAL

SUNEHARI BAGH BUILDERS PVT. LTD.

PUJA CONSTRUCTION COMPANY

SANJEEV FURNISHERS PVT LTD

ULTIMATE INTERNATIONAL PVT.LTD.

MANNU LAL AND SONS