Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.2 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹35.1 L+₹91,832 (2.68%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹35.6 L+₹1.3 L (3.93%)Rejected-Finance 101 VRAJ APARTMENT OPP POLICE HEAD QUARTER SARU SECTION ROAD JAMNAGAR 361008 | JAMNAGAR | JAMNAGAR | GUJARAT | 361008 | L3 | Rejected-Finance L3 | |
| 4 | L4₹35.9 L+₹1.7 L (5.07%)Rejected-Finance | L4 | Rejected-Finance L4 | |
| 5 | L5₹37.1 L+₹2.9 L (8.55%)Rejected-Finance | L5 | Rejected-Finance L5 |
Tender Value
₹32 L
EMD Value
₹64,000
Closing Date
8 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col Aman Bhardwaj
Military Engineer Service Garrison Engineer (AF) No.1 Air Force Station No.1 Jamnagar 361 003
COMPREHENSIVE MAINTENANCE AND PERIODICAL SERVICES OF CERTAIN MD AND OTM ACCN AT AF STN SAMANA
2023_MES_623939_1
8259/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
Samana
Please Refer Tender Documents
6 documents required · 6 mandatory
₹500
GE (AF) Jamnagar No. 1
₹64,000
Yes
19 Jan 2024
18 Oct 2023
15 Nov 2023
18 Oct 2023
8 Nov 2023
1 Nov 2023
Amount
Taking up or down 15mm dia steel tubing and connections, including cleaning for refixing or removal from site complete all as spd and directed
S&F 20mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed
Taking up or down 20mm dia steel tubing and connections, including cleaning for refixing or removal from site complete all as spd and directed
S&F 32mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed
Cutting chases, pinning in, making good to facings on stone concrete block or slab wall, where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as spd and directed
S&F in repair 15mm dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as spd and directed
S&F in repair 15mm dia Stop valves, cast copper alloy,fancy type, chromium plated with long shank and cup (concealed type)screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as spd and directed.
S&F in repair 15mm dia size Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as spd and directed
S&F in repair 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as spd and directed
S&F in repair 15 mm bore, swan neck, pillar taps cast copper alloy capaston head CP, screwed down high pressure with or without lettered “ HOT” or “ COLD” with long screwed shanks and fly nuts screwed for iron pipes fixed complete all as spd and directed
S&F in repair 15 mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as spd and directed
S&F in repairs two way bib cock brass chromium plated, fancy type fixed in 15 mm bore pipe complete all as specified and as directed.
S&F in repairs two way angle valve brass chromium plated, fancy type fixed in 15 mm bore pipe complete all as specified and as directed.
S&F in repair chromium plated soap tray any type and fixed to plugs on wall with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge
S&F in repair Chromium Plated Grating doom 100mm dia with or without hole complete all as specified and directed.
S&F in repair vitreous china wash basin, white, flat back, size 550 mm x 400 mm fixed on and including cast iron cantilever bracket 32 mm dia brass waste coupling and including waste fitting and union complete all as specified and directed by Engineer-in-Charge
S&F in repair Vitreous Cliina wash basin, angle back, size 400 x 400 mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets, 32 mm dia brass waste coupling and, waste fitting and union complete all as specified and directed by Engineer-in-Charge
S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as spd and directed
S&F in repair vitreous china wash down water closet pan (pedestal pattern) white with CI 'P' or 'S' trap incl water closet seat cover of plastic,jet etc.complete incl necessary PVC waste pipe fitting, complete all as specified and directed by Engineer-in-Charge
S & F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and directed by Engineer-in-Charge
S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as spd and directed
S&F in repair 10 Litre capacity PVC symphonic action type flushing cistern, duel flush type (ISI Marked) low level with inlet ball valve, float and handle & PVC flush pipe, fixed in position and connecting complete all as spd and directed
S&F in repairs PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as spd and directed
S & F in repair Low density polyethylene pipes (LDPE) 32mm dia of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc
S&F in repairs PVC waste pipe flexible type suitable for couplings 32 / 40 mm dia and 750 mm long complete all as spd and directed
S&F in repairs brass CP waste coupling (half or full threaded) of 32 / 40 mm size complete all as spd and directed
S&F in repair brass chromium plated shower rose 100 mm of size with arme and with or without swivel joints to steel pipe or union complete all as specified and directed by Engineer-in-Charge
S & F in repairs Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats Minimum weight 300gms) complete all as spd and directed
S & F in repair Tubular towel rail, 20mm dia, D type, 600mm long between flanges chromium plated complete all as spd and directed
S&F in repair Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed by Engineer-in-Charge
S&F in repairs PVC cabinet with mirror, of size 350 mm x 450 mm, fixed to wall with screws complete all as spd and directed
S & F in repairs mild steel cloth hooks set (5-6 hooks) complete all as specified and directed by Engineer-in-Charge
S&F in repair Soap dispenser completes all as specified and as directed by Engineer-in-Charge
S&F in repair PVC (SWR) pipes 75mm dia single socketed in any length with rubber ring joints fixed on walls or floors including clamp complete all as specified and directed
S & F in repair 75 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes complete all as specified and directed by Engineer-in-Charge
S&F in repair PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed on walls or floors including clamp complete all as specified and directed
S & F in repair 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes complete all as specified and directed by Engineer-in-Charge
M&L in repair 75 mm dia of PVC (SWR) floor trap plain with grating incluing jointing with solvent cement complete all as specified and directed by Engineer-in-Charge
S&F in repairs 15 mm size Gun-metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed complete all as spd and directed
S&F in repairs 25 mm size Gun-metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed complete all as spd and directed
Dismantling water tanks exc 250 ltr and n.exc 500 ltr and removing from site complete all as spd and directed
S&F 500 ltrs capacity triple layer, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position over existing PCC platform incl all fitting such as connection pieces with GI tank nipple for inlet, outlet, etc complete all as specified and directed
Dismantling water tanks exc 500 ltr and n.exc 1000 ltr and removing from site complete all as spd and directed
S&F 1000 ltrs capacity triple layer, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position over existing PCC platform incl all fitting such as connection pieces with GI tank nipple for inlet, outlet, etc complete all as specified and directed
S&F in repair 25mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed
S&F in repairs sinks made of stainless steel 1mm thick, kitchen or laboratory, with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including supply and fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as spd and directed
S&F in repairs sinks with drainage board made of stainless steel 1mm thick, kitchen or laboratory, with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including supply & fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete as specified and directed.
S&F in replacement Kitchen plate rack made of stainless steel not less than 1mm thick with fixing acessories, overall size 600mm x 600mm x 250 mm , complete all as specified and directed by Engineer-in-Charge
S&F in repair cover lid for 300/500/1000 ltr polythene water storage tank as required complete all as specified and directed by Engineer-in-Charge
S&F in repair Plastic water closet seat, Seat and cover for pedestal pan, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.
S&F in repairs brass,chromium plated toilet paper holder complete all as specified and as directed.
Taking down chowkats or frame with shutter of any description (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site complete all as specified and directed Engineer-in-Charge
Taking down shutter of any description exc 1.00 sqm and n exc 2.00 sqm each and removal from site complete all as specified and directed by Engineer-in-Charge
S & F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as per manufacturer's specifications and as directed by Engineer-in-Charge
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification &drawing.
S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed
Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters of any description (W/out taking off shutters from the frames) and removal from site complete all as specified and directed Engineer-in-Charge
M&L for Refixing of shutters of any description exc 1.00 sqm and n exc 2.00 sqm each in same opening after resecuring or easing & adjusting, complete all as specified and directed.
S&F Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates,etc conformin to Fe-290 (Gde E -165) as door frame, steel gate,sink, hand wash basin and cooler stand etc complete all as specified and directed Engineer-in-Charge.
S&F 35 mm thick second class hardwood Glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass / gauge, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), fitted to chowkats complete all as specified and directed by Engineer-in-Charge
S&F 2nd class HW 35mm thick Plain, framed,panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed Engineer-in-Charge
S&F 30mm thick. flush shutter, solid core construction with particle board core and ply woood face panels commercial type on both side complete all as specified and directed Engineer-in-Charge
Taking down shutter of any description n exc 1.00 sqm each and removal from site complete all as specified and directed by Engineer-in-Charge
S&F 18/19 mm thick, Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work
M & L Second class hard wood (hollock) plain fillets of Sectional area not exceeding 3 Sq. cm, square, rectangular or triangular in section, clean sawn, secured with head less nails or brads, complete all as specified
S & F Continuous (piano) hinges, mild steel, width of flaps (when open) is 30 mm bright finish or electrogalvanised
S&F 100mm Hasp and staple, safety type of aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified & directed.
M&L for preparation of new or previously untreated wooden surfaces, exc 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer all as specified and as directed by Engineer-In-Charge.
S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified & directed.
S&F 75 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified & directed.
S&F 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified & directed.
S&F 125 mm in size aluminium handles cast type anodized complete all as specified & directed.
S & F 250 mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed by Engineer-in-Charge
S & F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aparture 1.18 mm and fixed with tinned tacks ro galvanised wire stapple complete all as specified and directed by Engineer-in-Charge
S&F in repairs Curtain rod, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified & directed.
S&F in replacement door closer hydraulically regulated designation No 2, aluminium (Die cast) body, universal type suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg fixed complete all as specified & directed.
M&L in replacement for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed
S&F in repair 100 mm size mild steel body Mortise lock, vertical type, with 4 brass liver, fixed to aluminium door complete.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified & directed.
S&F sheet glass 4 mm thick ordinary quality (plain/floated/frosted) and glazing with oil putty / wooden beads / aluminium glazing clip in square n.exc. 0.5 sqm in each pane complete all as specified & directed.
S&F sheet glass 4 mm thick ordinary quality (plain/floated/frosted) and glazing with oil putty / wooden beads / aluminium glazing clip in square exc. 0.5 sqm in each pane complete all as specified & directed.
S&F figured glass 4 mm thick pin headed type and glazing with oil putty / wooden beads / aluminium glazing clip in squares n.exc 0.5 sqm in each pane all as specified complete all as specified & directed.
S&F in repair MS louvers of 80 mm wide & 4 mm thick frosted glass including aluminium louver patti for adjusting the louvers fixed in Aluminium ventilators with screws etc complete all as specified and directed by Engineer-in-Charge
S & F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aparture 1.18 mm and fixed with tinned tacks ro galvanised wire stapple complete all as specified and directed by Engineer-in-Charge
S & F in repair 140mm long (Overall length of cover plate)floor door stopper of aluminium alloy body and tounge, anodised, with hard drawn steel spring complete all as specified and directed by Engineer-in-Charge
S&F in repair 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified & directed.
S&F in repair 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified & directed.
S&F in repair 125 mm in size aluminium handles cast type anodized complete all as specified & directed.
S & F in repairs 250 mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed.
S&F in repairs 100mm Hasp and staple, safety type of aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified & directed.
S&F in repairs 200mm, ordinary Mild Steel rat tail rod pattern springs including roller and roller plate complete all as specified & directed.
M & L for Second class hard wood Beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc.. and removing old beads to Store complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for.
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165
M&L for preparation of new or previously untreated steel surfaces, exc 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide all as specified and as directed by Engineer-In-Charge.
M&L for Washing, rubbing down and stopping of distempered and painted surfaces of wall including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and as directed by Engr-In-Charge.
M&L for Washing, rubbing down and stopping of distempered and painted surfaces of ceiling including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and as directed by Engr-In-Charge.
M&L for Washing, rubbing down and stopping of distempered and painted surfaces of walls including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of Distemper oil emulsion complete all as specified and as directed by Engr-In-Charge.
M&L for Washing, rubbing down and stopping of distempered and painted surfaces of ceiling including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of Distemper oil emulsion complete all as specified and as directed by Engr-In-Charge.
M&L for Washing, rubbing down and stopping of distempered and painted surfaces of walls including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying Two coat of Distemper oil emulsion complete all as specified and as directed by Engr-In-Charge.
M & L for preparing old decorated wall /soffit/chajja/fins etc.surfaces, plastered or unplastered and applying one coat of acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 : 2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company Depot tinted) with silicon additives complete all as specified and as directed by Engr-In-Charge. (Note:- Quoted rate deemed to carryout wk at height upto 8.00 m)
M & L for preparing old decorated wall /soffit/chajja/fins etc. surfaces, plastered or unplastered and applying two coats of acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 : 2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company Depot tinted) with silicon additives complete all as specified and as directed by Engr-In-Charge. (Note:- Quoted rate deemed to carryout wk at height upto 8.00 m)
M&L for preparation of old painted steel surfaces, exc 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed by Engineer-In-Charge. (Note:- Quoted rate deemed to carryout wk at height upto 8.00 m)
M&L for preparation of old painted steel surfaces, exc 10 cm width or girth and applying two coat of synthetic enamel paint all as specified and as directed by Engineer-In-Charge.
M&L for preparation of old painted wooden surfaces, exc 10 cm width or girth and applying two coat of synthetic enamel paint all as specified and as directed by Engineer-In-Charge.
M&L for Preparation of old painted plasterd / concrete Surfaces of any description over 10cm girth or width, not otherwise described and applying Two coat of synthetic enamel paint complete all as specified and as directed by Engr-In-Charge.
M&L for Preparation of old painted Surfaces of any description over 10cm girth or width, not otherwise described of wall and applying Two coat of Plastic emulsion over and including 1mm thick wall care putty complete all as specified and as directed by Engr-In-Charge.
M&L for 2mm thick wall care putty on wall complete all as specified an directed.
M & L for re-writing letters or figure (Block, Roman, Italic or Indian) n.exc. 30 cm height with synthetic enamel paint without showing brush mark, complete all as specified and as directed by Engr-In-Charge.(Note:- Quoted rate deemed to carryout wk at height upto 8.00 m)
Taking down cement or cement lime plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debries to a distance exc 1.5 km but n.exc 2 Km, complete all as spd and directed
M&L for rendering 15 mm thick on stone masonary/brick / concrete surface of walls in cement mortar 1:6 complete all as spd and directed
M&L for preparing surafces plastered or unplastered of walls and applying two coats of oil bound distemper, white or tinted to match with existing work complete all as specified and directed
M&L for rendering 15 mm thick on stone masonary/brick / concrete surface of walls in cement mortar 1:4 complete all as spd and directed
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.
Jagdamba Engineering
M/s SK Traders
Krishna Bhoomi Enterprise
Indice Technologies
jitendra c joisar
JAY DWARAKDHISH ENTERPRISE
DWARKADHISH ENTERPRISE
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .