SPECIAL REPAIR/ REPLACEMENT OF LT PANEL, SWITCH GEAR AND ALLIED E AND M WORKS AND SPL REPAIR/ REPLACEMENT OF BLDG METER PANEL BOX AND ALLIED E AND M WORKS AT AF STN WADSAR UNDER GE (AF) CHILODA

Amount

Supply and installed cubicle compartmentalised outdoor type LT section pillar box, factory made, front and rear opening with locking arrangement, dust and vermin proof, CPRI approved, fabricated out of 3.0 mm thick CRCA sheet with canopy and base frame & mild steel angle iron stand, over all finished with epoxy powder coating, suitable for operation on 415 Volts, 50 Hz, AC supply, including earthing stud, labeling, danger plates etc. and section pillar box shall comprising the following complete including fixed in position, connect with electric supply complete all as specified and directed by EIC and consisting of the following:- Incoming (a) Bus bar chamber having 4 aluminium Bus bar strip 320 A Capacity. (b) MCCB 4 pole, 415V with thermal magnetic release adjustable setting of Capacity 160 Amps with ruputring capacity 25 KA - 01 No (c ) LED dispay 3 line Multimeter (d) LED RYB Phase indicater - 01 Set Out going (a) MCCB 4 pole, 415V with thermal magnetic release adjustable setting of Capacity 63 Amps with ruputring capacity 10kA - 04 Nos (b) MCB TPN, 63 Amps - 01 Nos (c) Space for 01 Nos of spare MCCB

Supply and installed cubicle compartmentalised outdoor type LT section pillar box, factory made, front and rear opening with locking arrangement, dust and vermin proof, CPRI approved, fabricated out of 3.0 mm thick CRCA sheet with canopy and base frame & mild steel angle iron stand, over all finished with epoxy powder coating, suitable for operation on 415 Volts, 50 Hz, AC supply, including earthing stud, labeling, danger plates etc. and section pillar box shall comprising the following complete including fixed in position, connect with electric supply complete all as specified and directed by EIC and consisting of the following:- Incoming (a) Bus bar chamber having 4 aluminium Bus bar strip 400 A Capacity. (b) MCCB 4 pole, 415V with thermal magnetic release adjustable setting of Capacity 250 Amps with ruputring capacity 25 kA - 01 No (c ) LED dispay 3 line Multimeter (d) LED RYB Phase indicater - 01 Set Out going (a) MCCB 4 pole, 415V with thermal magnetic release adjustable setting of Capacity 63 Amps with ruputring capacity 10kA - 05 Nos (b) MCB TPN, 63 Amps - 01 Nos (c) Space for 01 Nos of spare MCCB

Supply and installed cubicle compartmentalised outdoor type LT section pillar box, factory made, front and rear opening with locking arrangement, dust and vermin proof, CPRI approved, fabricated out of 3.0 mm thick CRCA sheet with canopy and base frame & mild steel angle iron stand, over all finished with epoxy powder coating, suitable for operation on 415 Volts, 50 Hz, AC supply, including earthing stud, labeling, danger plates etc. and section pillar box shall comprising the following complete including fixed in position, connect with electric supply complete all as specified and directed by EIC and consisting of the following:- Incoming (a) Bus bar chamber having 4 aluminium Bus bar strip 400 A Capacity. (b) MCCB 4 pole, 415V with thermal magnetic release adjustable setting of Capacity 250 Amps with ruputring capacity 25 kA - 01 No (c ) LED dispay 3 line Multimeter (d) LED RYB Phase indicater - 01 Set Out going (a) MCCB 4 pole, 415V with thermal magnetic release adjustable setting of Capacity 125 Amps with ruputring capacity 16kA - 02 Nos (b) MCCB 4 pole, 415V with thermal magnetic release adjustable setting of Capacity 63 Amps with ruputring capacity 10 kA - 03 Nos (c) Space for 01 Nos of spare MCCB

Supply and installed cubicle compartmentalised outdoor type LT section pillar box, factory made, front and rear opening with locking arrangement, dust and vermin proof, CPRI approved, fabricated out of 3.0 mm thick CRCA sheet with canopy and base frame & mild steel angle iron stand, over all finished with epoxy powder coating, suitable for operation on 415 Volts, 50 Hz, AC supply, including earthing stud, labeling, danger plates etc. and section pillar box shall comprising the following complete including fixed in position, connect with electric supply complete all as specified and directed by EIC and consisting of the following:- Incoming (a) Bus bar chamber having 4 aluminium Bus bar strip 600 A Capacity. (b) MCCB 4 pole, 415V with thermal magnetic release adjustable setting of Capacity 400 Amps with ruputring capacity 36 kA - 01 No (c ) LED dispay 3 line Multimeter (d) LED RYB Phase indicater - 01 Set Out going (a) MCCB 4 pole, 415V with thermal magnetic release adjustable setting of Capacity 200 Amps with ruputring capacity 25kA - 04 Nos (b) MCCB 4 pole, 415V with thermal magnetic release adjustable setting of Capacity 125 Amps with ruputring capacity 16 kA - 01 Nos (c) Space for 01 Nos of spare MCCB

Supply and installed cubicle compartmentalised outdoor type LT section pillar box, factory made, front and rear opening with locking arrangement, dust and vermin proof, CPRI approved, fabricated out of 3.0 mm thick CRCA sheet with canopy and base frame & mild steel angle iron stand, over all finished with epoxy powder coating, suitable for operation on 415 Volts, 50 Hz, AC supply, including earthing stud, labeling, danger plates etc. and section pillar box shall comprising the following complete including fixed in position, connect with electric supply complete all as specified and directed by EIC and consisting of the following:- Incoming (a) Bus bar chamber having 4 aluminium Bus bar strip 320A Capacity. (b) MCCB 4 pole, 415V with thermal magnetic release adjustable setting of Capacity 160 Amps with ruputring capacity 25 kA - 01 No (c ) LED dispay 3 line Multimeter (d) LED RYB Phase indicater - 01 Set Out going (a) MCCB 4 pole, 415V with thermal magnetic release adjustable setting of Capacity 125 Amps with ruputring capacity 16kA - 02 Nos (b) MCCB 4 pole, 415V with thermal magnetic release adjustable setting of Capacity 63 Amps with ruputring capacity 10 kA - 01 Nos (c) Space for 01 Nos of spare MCCB (d) MCB SPN 32 A - 03 Nos. (e) On load change over switch 125 Amps - 01 nos.

Supply and installed cubicle compartmentalised outdoor type LT section pillar box, factory made, front and rear opening with locking arrangement, dust and vermin proof, CPRI approved, fabricated out of 3.0 mm thick CRCA sheet with canopy and base frame & mild steel angle iron stand, over all finished with epoxy powder coating, suitable for operation on 415 Volts, 50 Hz, AC supply, including earthing stud, labeling, danger plates etc. and section pillar box shall comprising the following complete including fixed in position, connect with electric supply complete all as specified and directed by EIC and consisting of the following:- Incoming (a) Bus bar chamber having 4 aluminium Bus bar strip 400 A Capacity. (b) MCCB 4 pole, 415V with thermal magnetic release adjustable setting of Capacity 250 Amps with ruputring capacity 25 kA 01 No (c ) LED dispay 3 line Multimeter (d) LED RYB Phase indicater - 01 Set Out going (a) MCCB 4 pole, 415V with thermal magnetic release adjustable setting of Capacity 200 Amps with ruputring capacity 25 kA - 02 Nos (b) MCCB 4 pole, 415V with thermal magnetic release adjustable setting of Capacity 125 Amps with ruputring capacity 16 kA - 02 Nos (c) MCB TPN, 63 Amps - 01 Nos (d) Space for 01 Nos of spare MCCB

Supply and installed cubicle compartmentalised outdoor type LT section pillar box, factory made, front and rear opening with locking arrangement, dust and vermin proof, CPRI approved, fabricated out of 3.0 mm thick CRCA sheet with canopy and base frame & mild steel angle iron stand, over all finished with epoxy powder coating, suitable for operation on 415 Volts, 50 Hz, AC supply, including earthing stud, labeling, danger plates etc. and section pillar box shall comprising the following complete including fixed in position, connect with electric supply complete all as specified and directed by EIC and consisting of the following:- Incoming (a) Bus bar chamber having 4 aluminium Bus bar strip 320A Capacity. (b) MCCB 4 pole, 415V with thermal magnetic release adjustable setting of Capacity 160 Amps with ruputring capacity 25 kA - 01 No (c ) LED dispay 3 line Multimeter (d) LED RYB Phase indicater - 01 Set Out going (a) MCCB 4 pole, 415V with thermal magnetic release adjustable setting of Capacity 125 Amps with ruputring capacity 16kA - 01 Nos (b) MCCB 4 pole, 415V with thermal magnetic release adjustable setting of Capacity 63 Amps with ruputring capacity 10 kA - 01 Nos (c) Space for 01 Nos of spare MCCB (d) MCB SPN 40 A - 05 Nos. (e) On load change over switch 160 Amps - 01 nos.

Supply and installed cubicle compartmentalised outdoor type LT section pillar box, factory made, front and rear opening with locking arrangement, dust and vermin proof, CPRI approved, fabricated out of 3.0 mm thick CRCA sheet with canopy and base frame & mild steel angle iron stand, over all finished with epoxy powder coating, suitable for operation on 415 Volts, 50 Hz, AC supply, including earthing stud, labeling, danger plates etc. and section pillar box shall comprising the following complete including fixed in position, connect with electric supply complete all as specified and directed by EIC and consisting of the following:- Incoming (a) Bus bar chamber having 4 aluminium Bus bar strip 250A Capacity. (b) MCCB 4 pole, 415V with thermal magnetic release adjustable setting of Capacity 125 Amps with ruputring capacity 16 kA - 01 No (c ) LED dispay 3 line Multimeter (d) LED RYB Phase indicater - 01 Set Out going (a) MCCB 4 pole, 415V with thermal magnetic release adjustable setting of Capacity 63 Amps with ruputring capacity 10 kA - 02 Nos (b) MCB SPN 40 A - 05 Nos. (c) Space for 01 Nos of spare MCCB (d) Street light timer system with contractor, relay - 01 nos.

M & L taking out unserveiceable underground cable of any size (4x16 Sq mm to 3.5x400 Sq mm) 1100 volt grade & bricks, tracing out the defects, rectify the same, making servicable by removing/cutting U/S & burnt out part jointing with straight through joint of suitable size, testing with megger etc complete all as specified and directed. Note :- (Straight through joints will be measured and paid separately.)

M & L for straight through joint 1.1 KV for XLPE U/G cable Heat Shrink type of size 3.5 core, 35/50 Sq mm including testing complete all as specified and directed by EIC.

M & L for straight through joint 1.1 KV for XLPE U/G cable Heat Shrink type of 3.5 core, 70/95 Sq mm including testing complete all as specified and directed by EIC.

M & L for straight through joint 1.1 KV for XLPE U/G cable Heat Shrink type of size 3.5 core, 120/150 Sq mm including testing complete all as specified and directed by EIC.

M & L for straight through joint 1.1 KV for XLPE U/G cable Heat Shrink type of size 3.5 core, 185/240 Sq mm including testing complete all as specified and directed by EIC.

M & L for straight through joint 1.1 KV for XLPE U/G cable Heat Shrink type of size 3.5 core, 300/400 Sq mm including testing complete all as specified and directed by EIC.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and getting out in soft/loose soil complete all as specified and directed.

Returning , filling in trenches, including spreading , levelling , watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing excavated materials not exceeding 50 mtrs away and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Supply and laying of DWC HDPE pipe of SN4 category conforming to IS 14930 part I and II including all connected accessories like HDPE snap fit coupler with neaoprene 'O' rong of following size:- (i) DWC HDPE pipe 75 mm innner dia (for protection of 185 to 500 sqmm UG cable)

All as per item No 18 here in before but DWC HDPE pipe 63 mm innner dia ( for protection of 150/120 sqmm UG cable)

All as per item No 18 here in before but DWC HDPE pipe 50 mm innner dia ( for protection of 95/70/50 sqmm UG cable)

All as per item No 18 here in before but DWC HDPE pipe 40 mm innner dia ( for protection of 25/16 sqmm UG cable)

M & L for boring of holes up to 80 mm dia under road pavement, hard standing, etc by trench- less technology using ultra sound technique complete all as directed by Engineer-in- charge. Note:- Pipe for protection of cable shall be measured and paid separately.

Supplying and laying XLPE insulated, PVC sheathed, armoured, heavy duty, aluminium conductor LT, 1100/11 KV Volts grade including taking out old/unserviceable underground cable complete and fixed on walls and trenches etc including all electrical connection and testing complete all as directed by Engineer-in- charge of following sizes: - (i) 16 Sqmm 4 core

All as per item No 23 here in before but 25 Sqmm 3.5 core.

All as per item No 23 here in before but 50 Sqmm 3.5 core.

All as per item No 23 here in before but 70 Sqmm 3.5 core.

All as per item No 23 here in before but 95 Sqmm 3.5 core.

All as per item No 23 here in before but 120 Sqmm 3.5 core.

All as per item No 23 here in before but 185 Sqmm 3.5 core.

All as per item No 23 here in before but 400 Sqmm 3.5 core.

S & F in replacement MCCBs including all electrical connection and testing complete all as specified and directed by EIC for the followings sizes :- (i)MCCB TP 630 amp Adjustable type 50 KA

All as per item No 31 here in before but MCCB TP 250 amp Adjustable type 25 KA

All as per item No 31 here in before but MCCB TP 400 amp Adjustable type 36 KA .

All as per item No 31 here in before but MCCB TP 200 amp Adjustable type 25 KA .

All as per item No 31 here in before but MCCB TP 160 amp Adjustable type 16 KA

All as per item No 31 here in before but MCCB FP 630 amp Adjustable type 50 KA

All as per item No 31 here in before but MCCB FP 400 amp Adjustable type 36 KA .

All as per item No 31 here in before but MCCB FP 250 amp Adjustable type 25 KA .

All as per item No 31 here in before but MCCB FP 200 amp Adjustable type 25 KA .

All as per item No 31 here in before but MCCB FP 160 amp Adjustable type 16 KA

All as per item No 31 here in before but MCCB TP 125 amp fixed type 16 KA

All as per item No 31 here in before but MCCB TP 100 amp fixed type 10 KA.

All as per item No 31 here in before but MCCB FP 100 amp fixed type 10 KA.

All as per item No 31 here in before but MCCB FP 125 amp fixed type 10 KA.

All as per item No 31 here in before but MCCB FP 63 amp fixed type 10 KA.

All as per item No 31 here in before but TPN 40 to 100 AMP capacity ,415 volt 'C' curve.

All as per item No 31 here in before but MCB TP 40 A,C curve

S& F in replacement ACB 4 Pole, 415 V, 50 Hz with Thermal Magnetic, Release (Manual drawout type) of capacity 800 Amps, 50 KA, including necessary electrical cable connections and testing complete all as specified and directed.

All as per item No 48 here in before but 630 Amps capacity.

S& F in replacement Voltmeter digital type 96 x 96 mm square, 0-500Volt including all necessary electrical cable connections and testing complete all as specified and directed.

S& F in replacement Ammeter Digital type 96 x 96 mm square , 0-200Amp, including suitable CT's including all necessary electrical cable connections and testing complete all as specified and directed.

Supply and fix in replacement of APFC relay 8/6 stage, 144 x 144 size including all necessary electrical cable connections and testing complete all as specified and directed.

Supply and fix in replacement of CT Coil, 150/5 amp including all necessary electrical cable connections and testing complete all as specified and directed.

M & L for control wiring in APFC panel with copper flexible wire 2.5 Sqmm including all necessary electrical cable connections and testing complete all as specified and directed.

Supply and fix in replacement of contactor for 25 KVAR including all necessary electrical cable connections and testing complete all as specified and directed.

Supply and fix in replacement of contactor for 15/20 KVAR including all necessary electrical cable connections and testing complete all as specified and directed.

Supply and fix in replacement of contactor for 5/10/12.5 KVAR including all necessary electrical cable connections and testing complete all as specified and directed.

Supply and fix in replacement of KVAR capacitor 5 to 10 KVAR including all necessary electrical cable connections and testing complete all as specified and directed.

Supply and fix in replacement of KVAR capacitor 12.5/15/20 KVAR including all necessary electrical cable connections and testing complete all as specified and directed.

Supply and fix in replacement of KVAR capacitor 25 KVAR including all necessary electrical cable connections and testing complete all as specified and directed.

Material & labour for earthing complete supply, install , testing and commissioning maintence free comprising of high tensile low carbon steel rod of 3 mtrs length & 17.2mm dia with 250 micron (average) molecularly bonded copper on the outer surface to confirm with the requirement of UL 467 placed in bore min 150mm dia upto 3 mtr deep with and including necessaary excavation by any means in any type of soil/strata like soil, rock or any other black soil, rock or any other along with back-fill compound strictly be a carbon based conductive concreate type which was resistively of less than 0.12 ohm mtr as per clause 14.5 D of IEEE : 80 Standard back-fill compound should be electronically conductive (like in metals) and should not depend on moisture for condition. Compound shall be suplied in sealed bags. The earth electrode should finally be housed in heavy duty concreate/PVC chamber with cover of size 300x300x300mm for future access. Back-fill compound should be enviroment freindly, should solodoty when mixed with water and should not leach/diffuse into ground.

Supply and installed three phase 82.5 KVA DG AMF with 130 Amp auto change over cubicle type, base mounting control panel with hinged door, un drilled bottom gland plate, Aluminium bus bar switable rating and factory made, complete all as specified and directed by EIC. Complete all as specified and directed and consisting of the following:- Switch gears : (i) 130 amp 4 pole contactor for alternator with thermal O/L relay. (ii) 130 amp 4 pole contactor for mains Back up protections : HRC fuse for short circuit protection. Microprocessor based AMF module incorporting function: (i) Supply failure timer. (ii) Restoration timer.(iii) 3 Impulse automatic engine start/stop logic.(iv) Mains/generator voltage & frequency sensing Multifunction Meter & PCC 0301 with scrolling reading for : (i) water temprature / lube oil pressure.(ii) Voltage/Ampere/Frequency/KW/KVA. (iii) Running hour counter. Fault indication (LED Type) : (i) Over/under speed (ii) fails to start. (iii) Low oil pressure.(iv) Battery charger failure. (v) High engine temprature.(vi) Electronic KWH meter (counter display). (vii) Current transformer Relay : Earth fault relay (electronic type) Indication (LED) : DG ON, Load ON DG, Main ON, Load ON Mains,battery charger ON etc. Push bottons (AMF module by pass mode: Engine start/stop, generator contactor Close/Trip, main contactor Close/Trip, Fault ACCEPT/RESET Battery Chargers :(i) SMPS based unit with inbuilt auto / Manual & folat / boost facility (ii) DC voltmeter & Ammeter (separate)

M&L for in replacement concealed sub main wiring of two run with 04 Sqmm single core PVC insulated, FRLS, flexible multi stranded copper conductor cable 1100 volts grade, drawn through and in existing conduit pipe including one run of 4.0 Sqmm single core PVC insulated, FRLS , flexible copper cable as earth continuity conductor in green colour complete all as specified and directed. Note- (a) Two runs of single core cable with one run of earth continuity cable will be measured and paid as one unit. (b) Make disturbed surface good to wall/floors .

All as per item No 63 here in before but with 6 sqmm

All as per item No 63 here in before but with 4 sqmm and in PVC casing capping with all asscessories.

M & L including taking down for concealed point wiring complete with FRLS PVC insulated /unsheathed stranded copper conductor of wire 1.5 Sqmm , 1100 volt grade , alongwith one single core of same size stranded copper as continuous earth wire to common earth dolly, drawn through inexisting conduit pipe fixed in concealed surface of wall/ceilling/false ceilling including cutting /chasing in wall as required with powder coated sheet metal terminal boxes of required sizes and thickness (factory made) sunk in wall only with 3.0 mm thick laminated sheet where as required and accessories complete all as specified and directed suitable for the following :- (a) One light/fan point controlled by one, one way switch

All as per item No 66 here in before but One socket outlet 05 Amps on the same board

All as per item No 66 here in before but One socket outlet 05 Amps on independent board

All as per item No 66 here in before but One bell/buzzer point controlled by on bell push

All as per item No 66 here in before but point wiring with 2.5 Sqmm cable and 2.5 Sqmm earth continuity conductor for 3 pin 15 Amp socket complete all as specified and directed.

M&L including taking down for point wiring complete with 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor cable 1100 volt grade, (FRLS) through and including 20X12 mm PVC casing-n- copping and its accessories, cadmium screws and including 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor cable(FRLS) as earth continuity conductor and MS boxes made of 16 gauge MS sheet concealed type on walls cover 3mm thick for housing the specified and directed for the following :- (a) One light/fan point controlled by one on way switch

All as per item No 71 here in before but One socket outlet 05 Amps on the same board

All as per item No 71 here in before but One socket outlet 05 Amps on independent board

All as per item No 71 here in before but One bell/buzzer point controlled by on bell push

All as per item No 71 here in before but point wiring with 2.5 Sqmm cable and 2.5 Sqmm earth continuity conductor for 3 pin 15 Amp socket and all as specified and directed.

M & L for concealed point wiring complete with FRLSH PVC insulated /unsheathed stranded copper conductor of wire 1.5 Sqmm , 1100 volt grade , alongwith one single core of same size stranded copper as continuous earth wire to common earth dolly in and including PVC conduit pipe fitting medium grade of 25 mm dia fixed in concealed surface of wall/ceilling/false ceilling including cutting /chasing in wall as required with ISI mark heavy duty PVC flux boxes suitable for modular plate of required sizes and thickness (factory made) sunk in wall where as required and accessories complete incl taking down old us point wiring with all accessories suitable for the following :- (a) One light/fan point controlled by one on way switch

All as per item No 76 here in before but One socket outlet 05 Amps on the same board

All as per item No 76 here in before but One socket outlet 05 Amps on independent board

All as per item No 76 here in before but One bell point

All as per item No 76 here in before but point wiring with 2.5 Sqmm cable and 2.5 Sqmm earth continuity conductor for 3 pin 15 Amp socket complete all as specified and directed.

S&F in repair 2 way sheet metal enclosures for flush/surface mounting distribution board Single door, 240 volts without bus bar complete all as specified and directed.

S&F in repair 4 way sheet metal enclosures for flush/surface mounting distribution board double door, 240 volts factory made and tested complete, suitable for mounting MCBs with 200 Amps rated bus bar, cable lugs complete all as specified and directed.

All as per item No 82 here in before but 8 way

All as per item No 82 here in before but 12 way

All as per item No 82 here in before but 4 way 415 volts TPN DB

M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick electrode, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to 4 mm dia galvanized earth wire by means of bolts, nuts, check-nuts and washers of galvanized iron or steel all as shown in electrical plate No 5 (duly protected with 15 mm dia light grade GI pipe upto 7.5m from the earth plate) and connected to GI steel earth plate including charcoal, dust, common salt, necessary excavation in soft/loose soil, returning, filling in and removal of surplus soil to a distance not exceeding 50 m from the starting point, watering pipe 20 mm bore GI tube of light grade treated with 1 No PGI funnel, pit of PCC 1:2:4 type B-1/ RCC 1:2:4 type B-1, pit cover 75 mm thick reinforced with 6 mm dia bars @ 75 mm c/c both ways and with MS handle 12 mm dia connected to earth test point including testing Incl taking down old u/s one complete all as specified and directed.

All as per item No 86 here in before but with GI strip 25 x 4 mm size.

S&F in replacement of miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP 240V, 10 KA 'B' curve, in the DB Complete with connection complete all as specified and directed.

All as per item No 88 here in before but SPN 32 AMP

All as per item No 88 here in before but SPN 40 to 63 AMP

S&F Switch piano, single pole one way 5 Amps 240 volt capacity flush type complete all as specified and directed.

S&F 3 pin 5 Amps Socket outlet , flush type complete all as specified and directed.

S&F Bell push piano type, single pole one way 5 Amps 240 volts capacity flush type complete all as specified and directed.

S &F an electric bell ding dong AC 230 volt single pole complete all as specified and directed.

S&F 5 pin, 5 Amps switch & socket combination flush type multipurpose 3 pin, 5 Amp flush type universal complete all as specified and directed.

Supply and fix 3 pin 15 Amps switch socket combination, flush type multi purpose 2 in 1 type (3 pin 5 Amps and 15 Amps) complete all as specified and directed.

Supply and fix 3 pin 15 Amps switch socket combination, flush type multi purpose 2 in 1 type including PVC mounting box (3 pin 5 Amps and 15 Amps) complete all as specified and directed.

S&F 5 pin, 5 Amps switch & socket combination flush type multipurpose 3 pin, 5 Amp flush type universal including PVC mounting box and complete all as specified and directed.

S&F Switch piano, single pole one way 15 Amps 240 volt capacity flush type complete all as specified and directed.

S&F 6 pin 15 Amps Socket outlet , flush type complete all as specified and directed.

S& F ceiling rose, 5 Amps surface type 240 volts bakelite three terminal complete all as specified and directed.

S&F fan regulator electronic step type 230 volts switch /socket type suitable for any type of ceiling fan sweep complete all as specified and directed.

S & F in replacement modular switch, one way, 6 Amps, 1 module, ISI marked complete all as specified and as directed.

S & F in replacement modular socket, 6 Amps - 2/ 3 pin combined 2 module, ISI marked complete all as specified and as directed.

S & F in replacement modular socket, 6/ 16 Amps - 2/ 3 pin combined 2 module, ISI marked complete all as specified and as directed.

S & F in replacement modular switch, one way, 16/ 20 Amps, 1 module, ISI marked complete all as specified and as directed.

S & F in replacement modular bell push, 6 Amps, 1 module, ISI marked complete all as specified and as directed.

S & F in replacement modular fan step regulator, 120 W - 1 module, ISI marked complete all as specified and as directed.

S & F in replacement modular white cover plate with frame, 2 module, ISI marked complete all as specified and as directed.

All as per item No 109 here in before but 3 module

All as per item No 109 here in before but 4 module

All as per item No 109 here in before but 6 module

All as per item No 109 here in before but 8 module

All as per item No 109 here in before but 12 module

Supply & fix on wall, Plug and socket in sheet steel enclosure with Songle pole & earth , suitable for 20 Amp with providing MCB SP 20 Amp suitable for single phase AC supply complete all as specified and as directed.

S&F holder brackets/angle suitable for any type of lamp (as per sample ordered) complete all as specified and as directed.

S&F 9 watt ball type LED lamp complete all as specified and as directed.

S & F in repair exhaust fan metal body with louver shutter capacity upto 450mm sweep existing at site incl necessary making all electrical connection complete all as specified and as directed. Note : Old Us fan deposited to MES store yard.

Supplying,installing,testing and commissioning in replacement of indoor type totally enclosed weather ,dust & vermin proof CPRI approved factory made LT wall mounted meter panel board 415 volt, 3 phase, 4 wires,AC,50 Hz fabricated from 2.00 mm thick CRCA sheet steel and epoxy powder coating in RAL 7032 shade with seven tank treatment process,front opening hinged door with a fully transparent cover made of polycarbonate/high grade engineering plastic to permit clear view of display,locking arrangement,Aluminum busbar 250 amp ,20 mm x 5 mm insulated with heat shrinkable sleeves, appropriate space for fixing single phase energy meter 05 Nos,hold fast/fastener/bolts/copper lugs/spacers/terminal blocks,rubber gasket,locking knobs,phenolic laminated sheets for live isolation ,heat shrinkable sleeves, nuts,bolts,washers,connections from MCCB to busbar,busbar to meter & meter to MCB with single core copper cable of size 6.0 sqmm connection , R- Y-B LED indications to show 3 phase availability at incomer including the following :- (i) 01 Nos (in coming) MCCB 63 Amps , 415 volts,4 pole, 16 KA, thermally adjustable between 70 to 100 %. (ii) Temper proof electric meters single phase -05 Nos (Refixing the existing) only alongwith sealing, making sticker of Qtr No in suitable size for identification etc all as directed by engr -in charge) (iii) Five numbers MCB DP 40 Amp,10 KA, 'C' seriesas approved ( one number in each outgoing side of meter)

Supply and fix in repair exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300 mm incl all electrical connection complete all as specified and as directed.

Abhishek Enterprises (BID ID -3202064)

Electricals India (BID ID -3195032)