Maintenance, Erection & Dismantling of HT, LT, TC Erection under Jurisdiction of LALBAGH & MANJALPUR S/Dn. Or Any other S/Dn. Of CFC LALBAUG Division

Maintenance, Erection and Dismantaling of HT/LT and Transformer center For LALBAUG & MANJALPUR SUB DIVISION and ANY S/Dn Of CFC Lalbaug

PR NO : 225484 TENDER ID: 554 / 25-26

Item Code No. Description of Work Unit Qty. Total value

HT TAPPING FROM THE EXISTING POLE INCLUDING FIXING OF CROSS ARMS,

CLAMPS ANTI-CLIMBING DEVICES, DANGER BOARD,INSULATORS, ETC,

1 9901000001 COMPLETE AND PAINTING OF FABRICATED MATERIALS AND NUMBERING Number 481 20

COMPLETE WITH COST OF PAINTS AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SET AND EARTHING

ERECTION OF PSC POLES OF 8 *200 KG INCLUDING EXCAVATION OF PIT AND

REFILLING OF EARTH, FIXING OF CROSS ARMS, TOP FITTING CLAMPS ANTI-

CLIMBING DEVICES, INSULATORS ETC. COMPLETE AND PAINTING OF

2 9902010001 FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COST Number 1163 20

OF PAINTS AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF

GUY SET AND EARTHING

ERECTION STEEL POLES OF 8 TO 9 & 11 METERS INCLUDING EXCAVATION OF

PIT AND REFILLING OF EARTH, FIXING OF CROSS ARMS, TOP FITTING CLAMPS,

ANTICLIMBING DEVICES DANGER BOARD, INSULATORS, ETC. COMPLETE AND

PAINTING OF STEEL POLE, FABRICATED MATERIALS USED ON ON THE POLE

AND NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION

BUT EXCLUDING ERECTION OF GUT SET AND EARTHING.

ERECTION STEEL POLES OF 13 METERS FOR RAILWAY CROSSING ON

BG/MG/NG/LINE FOR 0.400/11/22KV OVERHEAD LINE I.E. INCLUDING

EXCAVATION OF PIT AND REFILLING OF EARTH, FIXING OF CROSS ARMS, TOP

4 9902010005 FITTING CLAMPS, ANTICLIMBING DEVICES DANGER BOARD, INSULATORS, ETC. Number 2234 20

COMPLETE AND PAINTING OF STEEL POLES, FABRICATED MATERIALS USED

ON THE POLES AND NUMBERING WITH COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND EARTHING.

5 9902010006 ERECTION OF SUPPORT POLE - PSC Number 735 10

6 9902010007 ERECTION OF SUPPORT POLE - RSJ Number 735 10

ERECTION OF DOUBLE POLE STRUCTURE OF 8 METERS PSC

POLE INCLUDING EXCAVATION OF PITS & REFILLING OF EARTH, FIXING OF CHANNELS,

SUPPORTING ANGLES , CLAMPS, ANTI-CLIMBING DEVICES DANGER BOARDS, INSULATORS, ETC.,

COMPLETE AND PAINTING OF POLES FABRICATED MATERIALS USED ON THE POLES AND

NUMBERING WITH COST OF PAINTS AS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SETS AND EARTHING. ( W/O AB SWITCH ).

ERECTION OF DOUBLE POLE STRUCTURE OF 8 TO 9 METERS STEEL

POLE INCLUDING EXCAVATION OF PITS & REFILLING OF EARTH, FIXING OF CHANNELS,

SUPPORTING ANGLES , CLAMPS, ANTI-CLIMBING DEVICES DANGER BOARDS, INSULATORS, ETC.,

COMPLETE AND PAINTING OF POLES FABRICATED MATERIALS USED ON THE POLES AND

NUMBERING WITH COST OF PAINTS AS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SETS AND EARTHING. ( W/O AB SWITCH ).

ERECTION OF DOUBLE POLE STRACTURE WITH MOUNTING OF AB SWITCH, DO

FUSES OF 8 METERS, 200 KG PSC POLES INCLUDING EXCA-VATION OF PITS AND

REFILLING OF EARTH, FIXING OF CHANNELS,SUPPORTING ANGLES CLAMPS, ANTI-CLIMBING

9 9902020006 DEVICES DANGER BOARD, INSULATORS, DO FUSES, ETC., COMPLETE AND PAINTING OF Number 3179 10

FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF PAINTS AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND EARTHING.

ERECTION OF DOUBLE POLE STRACTURE FOR CTPT INSTALLATION WITH

MOUNTING OF AB SWITCH, DO FUSES OF 8 METERS, 200 KG PSC POLES INCLUDING EXCA-

VATION OF PITS AND REFILLING OF EARTH, FIXING OF CHANNELS,SUPPORTING ANGLES

CLAMPS, ANTI-CLIMBING DEVICES DANGER BOARD, INSULATORS, DO FUSES, ETC., COMPLETE

AND PAINTING OF FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COST

OF PAINTS AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND

D:\E DRIVE\MYP 21.04.2025\Tender\MYP Tender 04.07.2025\Maintenance Work Tender Lalbaug & Manjalpur 554 2025-26\02 OH scedule B Lalbaug & Manjalpur sdn Page

Maintenance, Erection and Dismantaling of HT/LT and Transformer center For LALBAUG & MANJALPUR SUB DIVISION and ANY S/Dn Of CFC Lalbaug

PR NO : 225484 TENDER ID: 554 / 25-26

Item Code No. Description of Work Unit Qty. Total value

ERECTION OF DOUBLE POLE STRACTURE WITH MOUNTING OF

AB SWITCH, DO FUSES, 9 & 11 METERS STEEL POLES INCLUDING EXCAVATION OF

PITS AND REFILING OF EARTH, FIXING OF CHANNELS, SUPPORTING ANGLE CLAMPS, ANTI-

11 9902020010 CLIMBING DEVICES , DANGER BOARDS, INSULATORS, ETC., COMPLETE AND PAINTING OF POLES Number 4171 10

FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND EARTHING.

ERECTION OF DOUBLE POLE STRACTURE FOR CTPT INSTALLATION WITH

MOUNTING OF AB SWITCH, DO FUSES, 9 & 11 METERS STEEL POLES INCLUDING

EXCAVATION OF PITS AND REFILING OF EARTH, FIXING OF CHANNELS, SUPPORTING ANGLE

CLAMPS, ANTI-CLIMBING DEVICES , DANGER BOARDS, INSULATORS, ETC., COMPLETE AND

PAINTING OF POLES FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH

COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND

ERECTION OF SINGLE POLE STRACTURE WITH MOUNTING OF DO FUSES,

TRANSFORMERS, LIGHTENING ARRESTERS, DISTRIBUTION BOX ETC. OF

METERS 200 KG PSC POLES INCLUDING EXCAVATION OF PITS AND REFILING OF EARTH,

CARTING OF TRANSFORMERS FROM STORE TO SITE, FIXING OF CHANNELS SUPPORTING

13 990230016 ANGLES, BRACING CROSS ARMS, CLAMPS ANTI-CLIMBING DEVICE DANGER BOARDS Number 4537 10

CONDUCTOR AND CABLE WIRING ETC., COMPLETE AND PAINTING OF FABRICATED MATERIALS

USED ON THE POLES AND NUMBERING WITH COST OF PAINTS AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND EARTHING.

ERECTION OF SINGLE POLE STRACTURE WITH MOUNTING OF DO FUSES,

TRANSFORMERS, LIGHTENING ARRESTERS AND WITHOUT DISTRIBUTION BOX

ETC OF 8 METERS 200 KG PSC POLES INCLUDING EXCAVATION OF PITS AND REFILING OF

EARTH, CARTING OF TRANSFORMERS FROM STORE TO SITE, FIXING OF CHANNELS SUPPORTING

14 990230016 ANGLES, BRACING CROSS ARMS, CLAMPS ANTI-CLIMBING DEVICE DANGER BOARDS Number 3313 10

CONDUCTOR AND CABLE WIRING ETC., COMPLETE AND PAINTING OF FABRICATED MATERIALS

USED ON THE POLES AND NUMBERING WITH COST OF PAINTS AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF

AB SWITCH, DO FUSES, 13 METERS STEEL POLES INCLUDING EXCAVATION OF PITS

AND REFILING OF EARTH, FIXING OF CHANNELS, SUPPORTING ANGLE CLAMPS, ANTI-CLIMBING

15 9902020019 DEVICES , DANGER BOARDSINSULATORS,ETC COMPLETE AND PAINTING OF POLES FABRICATED Number 4736 10

MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF PAINTS AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND EARTHING.

ERECTION OF DOUBLE POLE STRACTURE WITH MOUNTING OF DO FUSES,

TRANSFORMERS, LIGHTENING ARRESTERS, DISTRIBUTION BOX ETC. OF

METERS 200 KG PSC POLES INCLUDING EXCAVATION OF PITS AND REFILING OF EARTH,

CARTING OF TRANSFORMERS, FROM STORE TO SITE FIXING OF CHANNELS SUPPORTING

16 9902030001 ANGLES, BRACING CROSS ARMS, CLAMPS ANTI-CLIMBING DEVICE DANGER BOARDS Number 9074 10

CONDUCTOR AND CABLE WIRING ETC.,COMPLETE AND PAINTING OF FABRICATED MATERIALS

USED ON THE POLES AND NUMBERING WITH COST OF PAINTS AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND EARTHING.

ERECTION OF DOUBLE POLE STRACTURE WITH MOUNTING OF DO FUSES,

TRANSFORMERS, LIGHTENING ARRESTERS & WITHOUT DISTRIBUTION BOX ETC

OF 8 METERS 200 KG PSC POLES INCLUDING EXCAVATION OF PITS AND REFILING OF

EARTH, CARTING OF TRANSFORMERS, FROM STORE TO SITE FIXING OF CHANNELS SUPPORTING

17 9902030001 ANGLES, BRACING CROSS ARMS, CLAMPS ANTI-CLIMBING DEVICE DANGER BOARDS Number 7850 10

CONDUCTOR AND CABLE WIRING ETC.,COMPLETE AND PAINTING OF FABRICATED MATERIALS

USED ON THE POLES AND NUMBERING WITH COST OF PAINTS AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND EARTHING.

D:\E DRIVE\MYP 21.04.2025\Tender\MYP Tender 04.07.2025\Maintenance Work Tender Lalbaug & Manjalpur 554 2025-26\02 OH scedule B Lalbaug & Manjalpur sdn Page

Maintenance, Erection and Dismantaling of HT/LT and Transformer center For LALBAUG & MANJALPUR SUB DIVISION and ANY S/Dn Of CFC Lalbaug

PR NO : 225484 TENDER ID: 554 / 25-26

Item Code No. Description of Work Unit Qty. Total value

ERECTION OF SINGLE POLE STRACTURE WITH MOUNTING OF A B SWITCH, DO

FUSE, TRANSFORMERS, LIGHTENING ARRESTERS, DISTRIBUTION BOX 8 TO 9 &

11 METERS STEEL POLES INCLUDING EXCAVATION OF PITS AND REFILING OF

EARTH,CARTING OF TRANSFORMERS FROM STORE TO SITE,FIXING OF CHANNELS, SUPPORTING

ANGLES, BRACING, CROSS ARMS,CLAMPS, ANTI CLIMBING, DEVICES, DANGER BOARDS,

CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND PAINTING OF POLES FABRICATED

MATERIALS USED ON THE POLES AND NUMBERING AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SETS AND EARTHING.

ERECTION OF SINGLE POLE STRACTURE WITH MOUNTING OF A B SWITCH, DO

FUSE, TRANSFORMERS, LIGHTENING ARRESTERS & WITHOUT DISTRIBUTION

BOX 8 TO 9 & 11 METERS STEEL POLES INCLUDING EXCAVATION OF PITS AND REFILING

OF EARTH,CARTING OF TRANSFORMERS FROM STORE TO SITE,FIXING OF CHANNELS,

SUPPORTING ANGLES, BRACING, CROSS ARMS,CLAMPS, ANTI CLIMBING, DEVICES, DANGER

BOARDS, CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND PAINTING OF POLES

FABRICATED MATERIALS USED ON THE POLES AND NUMBERING AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF A B SWITCH, DO

FUSE, TRANSFORMERS, LIGHTENING ARRESTERS, DISTRIBUTION BOX 8 TO

& 11 METERS STEEL POLES INCLUDING EXCAVATION OF PITS AND REFILLING OF

EARTH,CARTING OF TRANSFORMERS FROM STORE TO SITE,FIXING OF CHANNELS, SUPPORTING

ANGLES, BRACING, CROSS ARMS,CLAMPS, ANTI CLIMBING, DEVICES, DANGER BOARDS,

CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND PAINTING OF POLES FABRICATED

MATERIALS USED ON THE POLES AND NUMBERING AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SETS AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF A B SWITCH, DO

FUSE, TRANSFORMERS, LIGHTENING ARRESTERS & WITHOUT DISTRIBUTION

BOX 8 TO 9 & 11 METERS STEEL POLES INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH,CARTING OF TRANSFORMERS FROM STORE TO SITE,FIXING OF CHANNELS,

SUPPORTING ANGLES, BRACING, CROSS ARMS,CLAMPS, ANTI CLIMBING, DEVICES, DANGER

BOARDS, CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND PAINTING OF POLES

FABRICATED MATERIALS USED ON THE POLES AND NUMBERING AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND EARTHING.

ERECTION OF GUY SETS INCLUDING EXCAVATION OF PITS & REFILING OF

EARTH, AS PER STANDARD SPECIFICATION WITH STAY CLAMPS STAY WIRES,

22 9902040001 ANCHOR ROD, TURN BUCKLE, EYE BOLT, GUY INSULATOR, CEMENT Number 561 10

CONCRETE BLOCK, ETC., BUT EXCLUDING CONCRETING.

CONCRETING/ MUFFING OF POLES GUY ETC., INCLUDING COST OF

23 9905010001 METAL (1:2:4) AND WATER ETC., AS PER C.C.M-20 GRADE STANDARD CMT 5995 20

SPECIFICATION .

ERECTION COIL TYPE EARTHING INCLUDING COST OF COAL & SALT, ETC.BUT

WITHOUT COST OF G I WIRE & COIL. AS PER STANDARD SPECIFICATION 10 KG

SALT + 10KG COAL.GI WIRE TO BE PASSED THROUGH PVC RIGID PIPE FOR

SUITABLE LENGTH AS PROVIDED BY THE S/DN ENGR. IN CHARGE

SRTINGING OF 34MM2 ,55MM2,AAA CONDUCTOR, FOR 11 KV & L.T. LINE ONE COND

INCLUDING FIXING OF INSULATORS, BINDING, JUMPERING, ETC. PER KM

SRTINGING OF 100 MM2, ACSR/DOG CONDUCTOR, FOR 11 KV & L.T.LINES ONE COND

INCLUDING FIXING OF INSULATORS, BINDING, JUMPERING, ETC. PER KM

D:\E DRIVE\MYP 21.04.2025\Tender\MYP Tender 04.07.2025\Maintenance Work Tender Lalbaug & Manjalpur 554 2025-26\02 OH scedule B Lalbaug & Manjalpur sdn Page

Maintenance, Erection and Dismantaling of HT/LT and Transformer center For LALBAUG & MANJALPUR SUB DIVISION and ANY S/Dn Of CFC Lalbaug

PR NO : 225484 TENDER ID: 554 / 25-26

Item Code No. Description of Work Unit Qty. Total value

THE WORK OF STRINGING OF ABC OF FOLLOWING SIZES INCLUDING FITTING

OF ALL ACCESSRIES I.E. SPECIAL DESIGN SUSPENSION / TENASION CLAMP,

FIXING OF CROSS ARM, L.T. SHACKLE INSULATOR , ETC. FOR FIXING OF

MESSAGER WIRE COMPLETE, AS REQUIRED & DIRECTED BY ENGINEER-IN-

CHARGE A: 3 X 50MM2+16MM2+1X 35MM2 B: 3 X 50MM2+16MM2+1X 25MM2

THE WORK OF STRINGING OF ABC OF FOLLOWING SIZES INCLUDING FITTING

OF ALL ACCESSRIES I.E. SPECIAL DESIGN SUSPENSION / TENASION CLAMP,

FIXING OF CROSS ARM, L.T. SHACKLE INSULATOR , ETC. FOR FIXING OF

MESSAGER WIRE COMPLETE, AS REQUIRED & DIRECTED BY ENGINEER-IN-

CHARGE A : 1 X 35MM2 + 1 X 25MM2

THE WORK OF STRINGING OF 11 KV ABC OF FOLLOWING SIZES IN URBAN

AREA INCLUDING FITTING OF ALL ACCESSRIES I.E. SPECIAL DESIGN SUSPENSION / TENASION

29 9903000007 CLAMP, FIXING OF CROSS ARM, BINDING TO PIN INSULATOR,PREPARING SHCKLE POINT KM 45107 10

JUMPERS ETC AS REQUIRED & DIRECTED BY ENGINEER-IN-CHARGE A: 3 X95MM2+1X

THE WORK OF STRINGING OF 11 KV ABC OF FOLLOWING SIZES IN RURAL

AREA INCLUDING FITTING OF ALL ACCESSRIES I.E. SPECIAL DESIGN SUSPENSION / TENASION

30 9903000007 CLAMP, FIXING OF CROSS ARM, BINDING TO PIN INSULATOR,PREPARING SHCKLE POINT KM 48117 10

JUMPERS ETC AS REQUIRED & DIRECTED BY ENGINEER-IN-CHARGE A:

PROVIDING GUARDING TO HT LINE ON ROAD/RAIL CROSSING

PROVIDING GUARDING OF LT LINE ON ROAD/RAIL CROSSING

33 9901000002 LT LINE TAPPING SINGLE PHASE. Number 51 10

34 9901000003 LT LINE TAPPING THREE PHASE. Number 93 10

LAYING OF OVER HEAD LT CABLE FOR ROAD CROSSING HT LINE CROSSING

AND TELEPHONE LINE CROSSING ETC (PER SPAN)

Dismentalling of all size (8,9,11,13…mtrs.) of RSJ (girder) Poles including dimentalling of

36 9907000006 relevant channels, cross arms insulators, jumpers, binding, earthing etc. INCLUDING Number 974.5 10

Dismentalling of PSC Poles including dimentalling of relevant channels, cross arms

insulators, jumpers, binding, earthing etc. INCLUDING Cr. IN STORE

38 9907000009 Dismentalling of conductor from line. INCLUDING Cr.IN STORE KM 1055.5 10

39 9907000012 Dismentalling of 8 MTR PSC D.P.Structure. INCLUDING Cr. IN STORE Number 1322 10

Dismentalling of 8 MTR PSC POLE Transformer Structure up to 100 kva. INCLUDING

41 9907000012 Dismentalling of 8 TO 9 MTR STEEL POLE D.P.Structure. INCLUDING Cr. IN STORE Number 1910.5 10

Dismentling OF 11 KV ABC from line. INCLUDING Cr. IN STORE IN RURAL AREA

INCLUDING REMOVING OF ALL ACCESSRIES

Dismentalling of A.B.Cable from line. INCLUDING Cr. IN STORE OF FOLLOWING

SIZES:A: 3 X 50MM2+16MM2+1X 35MM2 B: 3 X 35MM2+16MM2+1X 25MM2

Dismentalling of A.B.Cable from line. INCLUDING Cr. IN STORE OF FOLLOWING

INSTALLATION OF ENERGY METER & MMB/SMC BOX WITH ELECTRICAL WIRING

PROVIDING SINGLE PHASE SERVICE CONNECTION WITH PVC 2.5/4.0 MM2 TWIN

CORECABLE FROM TERMINAL POLE TO METERING POINT INCLUDING FIXING

OFMETER WITH METER EARTHING COMPLETE WORK AS PER STANDARD

SPECIFICATION BUT EXCLUDING COST OF MATERIALS.

PROVIDING THREE PHASE FOUR WIRE SERVICE CONNECTION WITH PVC

4MM2/10MM2 FOUR CORE CABLE FROM TERMINAL POLE TO METERING POINT

INCLUDING FIXING OF METER WITH METER EARTHING COMPLETE WORK AS

PER STANDARD SPECIFICATION BUT EXCLUDING COST OF MATERIALS

D:\E DRIVE\MYP 21.04.2025\Tender\MYP Tender 04.07.2025\Maintenance Work Tender Lalbaug & Manjalpur 554 2025-26\02 OH scedule B Lalbaug & Manjalpur sdn Page

Maintenance, Erection and Dismantaling of HT/LT and Transformer center For LALBAUG & MANJALPUR SUB DIVISION and ANY S/Dn Of CFC Lalbaug

PR NO : 225484 TENDER ID: 554 / 25-26

Item Code No. Description of Work Unit Qty. Total value

48 9909000001 CARTING OF PSC POLE AT DESTINATION(ABOVE 5 KM) Number 378 10

49 9909000006 CARTING OF RSJ POLE AT DESTINATION(ABOVE 5 KM) Number 536 10

REPLACEMENT OF FAIL TRANSFORMER & AUGMENTATION/DEAUGMENTATION

50 9908000049 OF TRANSFORMER(ANY CAPACITY) INCLUDING TRANSPORTATION & CREDIT Number 1500 10

OF OLD TRANSFORMER AT S/DN STORE

51 1501000024 M.S. Bolts & Nuts 65x16mm ( 2.5 X 5/8 INCH) KG 108.56 10

52 1501000031 M.S. Bolts & Nuts 180x16mm ( 7 X 5/8 INCH) KG 108.56 10

53 1501000038 M.S.Bolts & Nuts 300x16mm (12 X 5/8 INCH) KG 108.56 10

Proving & Fixing of HEAT SHRINKABLE TYPE CABLE JOINTING KIT SUITABLE FOR

11 KV 1C X 95 SQ MM AB CABLE FOR OUT DOOR TERMINATION APPLICATION

Proving & Fixing of HEAT SHRINKABLE TYPE CABLE JOINTING KIT SUITABLE FOR

11 KV 1C X 70 SQ MM AB CABLE FOR OUT DOOR TERMINATION APPLICATION

Installation of earhing pits as per drawing attached here with by providing 100 mm inner

dia-meter cast iron pipe of 13 mm thicknes & 3000 mm length. Work includes fabrication

& fixing of GI strips for earthing connections as per drawing attached. Excavated earth-

pit should be filled by mixture of coal / Charcoal, salt & sand up to top. Further this

includes provid ind brick masonary chambr of size 450mm x 450mm & depth up to

mm as per instruction of Engineer in charge including light type CI cover & applying

56 9918000135 mm thick cement plasterin 1:3 inside &to all exposed faces up to 3oo mm below, Number 23966 1

foundation level, curring etc. complete. Extra earth should be removed away from the

site S/S or refilling earthing pits if required. All required material for this job such as CI

pipe, cover with frame, salt, charcoal, sand cement gravel, bricks etc. to be supplied by

the contractor. Required bolts, nuts, washers, numberplates / painted plates also shall

be arranged by the contractor. Tentative quantity of salt & charcoal shall be 2.50 cu.m.

DRG.NO:-GETCO/E/4s-025/P-011,Revision-3 is attached

57 9911000071 PETROLING HT/LT LINE- PER POLE PER POLE 4 10

58 9911000190 RE-JUMPERING OF HT/LT LINE FOR SHACKLE POLE PER POLE 98 10

REPLACEMENT OF POLE MOUNTED 1PH / 3PH SERVICE CONNECTION BOX

INCLUDING RECONNECTING ALL CONNECTIONS

60 9911000189 Cutting of Tree branches obstructing HT/LT line on one tree PER TREE 60 10

61 9911000189 Cutting of bigger size of Tree branches / Whole tree obstructing HT/LT line PER 477 10

62 9911000229 PIN BINDING OF 11KV PIN INSULATOR PER POLE 47 10

63 9911000230 PIN BINDING OF LT LINE PIN OR SHACKLE INSULATOR PER POLE 47 10

64 9908000003 REPLACEMENT OF 11 KV DISC INSULATOR Number 171 10

65 9908000166 REPLACEMENT OF LT PIN /SHACKLE INSULATOR Number 37 10

66 9908000001 REPLACEMENT OF V CROSS - ARMS Number 244 10

67 9908000051 REPLACEMENT OF TOP FITTING Number 60 10

68 9908000007 REPLACEMENT OF LT CROSS - ARMS Number 79 9

PROVIDING DO FUSE OR AB SWITCH ON DP (FOR ONE SET) WITH FABRICATION

69 9908000169 & COLOUR CODE JUMPER,INCLUDING PROPER ALIGNMENT OF AB SWITCH Number 856 10

NUMBERING THE POLE WITH PAINT BY PREPARING BACK GROUND OF

REQUIRED HEIGHT SURFACE OF ONE COLOUR AND HAVE LETTERING ( 2" & 3"

70 9911000001 HT ) AS DIRECTED BY IN CHARGE ENGINEER .THE TWO COLOUR SHOULD HAVE Number 60 10

BEEN SLECTED AS TO HAVE CONTRAST FOR PROPER

READABILITY.(REQUIRED COLOUR TO BE PROVIDED BY CONTRACTER)

FIXING OF SMC (1-Ph) AT CONSUMER INSTALLATION ( INCLUDING COST OF

FIXING OF SMC (3-Ph) AT CONSUMER INSTALLATION ( INCLUDING COST OF

73 9908000023 REPLACEMENT OF METER (1 PH) WITH WIRING - Urban Number 58.13 10

74 9908000023 REPLACEMENT OF METER (1 PH) WITH WIRING - Rural Number 85.05 10

75 9911000227 PROVIDING (PAINTING ) CONSUMER No ON SMC/MMB - Rural Number 21.53 10

76 9911000227 PROVIDING (PAINTING ) CONSUMER No ON SMC/MMB - Urban Number 11.842 10

D:\E DRIVE\MYP 21.04.2025\Tender\MYP Tender 04.07.2025\Maintenance Work Tender Lalbaug & Manjalpur 554 2025-26\02 OH scedule B Lalbaug & Manjalpur sdn Page

Maintenance, Erection and Dismantaling of HT/LT and Transformer center For LALBAUG & MANJALPUR SUB DIVISION and ANY S/Dn Of CFC Lalbaug

PR NO : 225484 TENDER ID: 554 / 25-26

Item Code No. Description of Work Unit Qty. Total value

REPLACEMENT OF SINGLE PHASE OLD SERVICE BY NEW SERVICE INCL

77 9908000016 .SHORTFALL REEL INSULATORS, EGG INSULATORS, NAILS, FIXING FASTNERS Number 98 8

78 9902040007 ERECTION/PROVIDING LIGHTENING ARRESTOR Number 123 10

REPAIRING/ADJUSTING TENSION OF EXISTING GUY/STAY SET INCLUDING

PROVIDING/REPLACEMENT OF STAY INSULATOR

REPLACEMENT OF OLD DISTRIBUTION BOX 200 KVA & ABOVE WITH MAKING

ALL CONNECTIONS CRIMPING OF LUGS,NEUTRAL ETC

REPLACEMENT OF OLD DISTRIBUTION BOX UP TO 100 KVA & ABOVE WITH

MAKING ALL CONNECTIONS CRIMPING OF LUGS,NEUTRAL ETC

82 9911000054 PROVIDING LINE SPACER BETWEEN LT LINE CONDUCTOR WITH BINDING Number 37 10

83 9908000050 REFITTING/REPLACEMENT OF LIGHTENING ARRESTORS Number 37 10

84 9911000072 THREAD BURNING OF HT/LT LINE INCLUDING COST OF OIL AND BAMBOO ETC. Number 73 10

85 9911000010 REFIXING OF V CROSS ARM FITTING INPROPER POSITION Number 73 10

86 9911000226 REFIXING OF TOP FITTING INPROPER POSITION Number 49 11

87 9903000004 RESTRINGING OF ACSR/AAC SPAN Per Span 111 10

88 9911000224 RE-STRINGING OF 11KV A.B.CABLE (ALL SIZE) HT ABC ONLY Per Span 330 10

89 9911000225 RE-STRINGING OF DOG CONDUCTOR WITH NEW DOUBLE PIN BINDING Per Span 148 10

MOULDING OF CABLE JOINT FOR XLPE CABLE (STRAIGHT/INDOOR/OUTDOOR)

D:\E DRIVE\MYP 21.04.2025\Tender\MYP Tender 04.07.2025\Maintenance Work Tender Lalbaug & Manjalpur 554 2025-26\02 OH scedule B Lalbaug & Manjalpur sdn Page

Maintenance, Erection and Dismantaling of HT/LT and Transformer center For LALBAUG & MANJALPUR SUB DIVISION and ANY S/Dn Of CFC Lalbaug

PR NO : 225484 TENDER ID: 554 / 25-26

Item Code No. Description of Work Unit Qty. Total value

91 9908000451 Replacement of 11KV PIN insulator by new Pin Insulator /Composite Pin Insulator Number 56 10

92 9908000452 Straightening of tilted PSC/RSJ Pole at pin point Number 284 10

93 9908000453 Straightening of tilted PSC/RSJ Pole at tension point Number 329 10

94 9908000454 Straightening of tilted D.P. Set (PSC / Girder pole) etc with refilling of stones, morum etc. Number 810 10

Laying/Relaying of cable in Cable trench & from ground level to pole structure for

providing outdoor cable joints.

96 9903000009 Unbundaling of all size HT ABC KM 12029 15

97 9903000008 Stringing of all size HT ABC KM 6015 10

TOTAL ESTIMATED AMOUNT Without GST IN RS

TOTAL AMT WITH GST

Bidder‟s offer (+/-) in % [B]

Grand Total [C=A+/-(A*B)

Grand Total [C=A+/-(A*B)

Goods & Service tax [D = C x GST %] (GST Rate :___%) SAC Code:

Grand Total including GST [E=C+D]

Grand Total including GST [E=C+D]

Final offer (in RS.)

Final offer (Rs. In words)

The bidder shall quote FIRM PRICES only. The prices quoted will not be subject to any escalation till completion of work.

The above prices are inclusive of all taxes, levies Duties etc. except Goods & Service tax (GST). GST will be paid extra as applicable from time to time on a given

taxable goods and/or services.

NOTE: Work for this order is for GIDC sdn and ANY SDN of CFC within the jurisdiction of Lalbaug division.

RATE INCLUSIVE/EXCLUSIVE OF GST SHOULD BE CLEARLY MENTIONED IN YOUR QUAOTATION(MENTION IT IN ONLINE

IN SCHDULE ''B'' MENSIONED QUANTIES ARE ESTIMATED. QUANTIIES MAY BE INCREASED OR DECREASED IN EVERY

WORKS. BUT ORDER VALUE WILL NOT BE CHANGED & PAYMENT WILL DONE AS PER ACTUL EXCUSION OF WORKS

In case any joint fails within one year due to poor workmanship,it should be replaced free of cost by you else, the charges for the

same will be deducted from your bill.

For laying of double circuit, both cables should be covered with separate RCC hume pipe of 6"diameter OR Provided HDPE Pipe for

laying 11KV cable. Pipe should be 10mm thickness.

If the work of cable would not be started within six hours from verbal instruction of Engineer-in-charge from sub-division, the penalty

will be charged @ Rs.200/- per occasion.

SIGNATURE OF CONTRACTOR

(With Rubber Stamp & Date)

D:\E DRIVE\MYP 21.04.2025\Tender\MYP Tender 04.07.2025\Maintenance Work Tender Lalbaug & Manjalpur 554 2025-26\02 OH scedule B Lalbaug & Manjalpur sdn Page