Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.5 LAccepted-AOC BABAPORE KHREW PAMPORE PULWAMA KASHMIR | PULWAMA | JAMMU AND KASHMIR | 191102 | L1 | Accepted-AOC Lowest bidder and quoted reasonable rate | |
| 2 | L2₹9.5 L+₹1.9 L (24.5%)Rejected-Finance 0 GRAMTHANG MINJEE KARGIL KARGIL LADAKH 194105 | KARGIL | LADAKH | 194105 | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹10.5 L+₹2.9 L (38.5%)Rejected-Finance R O Y K PURA QAZIGUND ANANTNAG 192221 J K | ANANTNAG | JAMMU AND KASHMIR | 192221 | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹11.4 L+₹3.8 L (50.5%)Rejected-Finance | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹11.5 L+₹3.9 L (51.3%)Rejected-Finance 361 BEHIND DAV SCHOOL JAWAHAR NAGAR SRINAGAR 190008 | SRINAGAR | JAMMU AND KASHMIR | 190008 | L5 | Rejected-Finance Other than lowest bidder |
Tender Value
₹12 L
EMD Value
₹24,000
Closing Date
13 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Kargil
Office of GE Kargil, PIN - 908121, C/o 56 APO
GE-K-68-2023-24 - REPAIR REPLACEMENT TO MISC BR WORKS AT CERTAIN LOCATIONS AT DRASS UNDER GE KARGIL
2024_MES_637571_1
GE/K-68/2023-24
Open Tender
Civil Works
Item Rate
180 days
Drass
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Kargil
₹24,000
Yes
Office of GE Kargil
8 Jul 2024
15 Jan 2024
15 Feb 2024
15 Jan 2024
13 Feb 2024
30 Jan 2024
22 Jan 2024
Amount
Dismantling of floor hearth and wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises, complete all as specified and directed by Engr-in-Charge.
Demolition of PCC (un-reinforced) in ground floors & pavings n.exc 15 CM thickness below or above ground level, complete all as specified and directed by Engr-in-Charge.
M&L for 75mm thick, plain cement concrete, type D-2 1:3:6 (using 40mm graded stone aggregate) as in sub base flooring, surface finished even and rough to receive floor topping, complete all as specified and directed by Engr-in-Charge.
M&L for 25 mm thick plain cement concrete type B-0 (12.5mm graded stone aggregate) 1:2:4 as in floor complete all as specified and directed.
M&L Joint free Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc 0.18 and n.exc 0.38 Sqm in floors over 15mm thick screed bed in cement mortar 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed.
M&L Vitrified ceramic tiles light shade 10mm thick (square/ rectangular) polished area of each tiles exc 0.42 and n.exc 1.00 Sqm in floors over 15mm thick screed bed in cement mortar 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed.
M&L for endura tiles, heavy duty type of size 300x300mm, 10mm thick, non skid, acid and scratch resistance laid over 15mm thick screed bed in CM 1:4 as in floor, jointed in neat cement slurry and pointed with white cement and pigment to match the shade completed all as specified and as per direction of manufacturer instuctions / Engr in charge.
M&L for Coloured Glazed ceramic tiles of size 450x300x7 mm thick in vertical surface set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles laid over and including 10 mm thick rendering in CM (1:3), complete all as specified and directed.
Dismantling of Stone sett paving of any description or thickness in floors, aprons etc. laid dry or laid dry and pointed complete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment over 25mm thick sand cushion complete all as specified and directed. (Note- Sand cushion will be measured and paid separately)
M&L for Sand filling under floors or in foundation including watering and consolidation all as specified and as directed.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed by Engr in charge
M&L for granite work (table rubbed, polished and moulded) 18-20 mm thick as in steps,jambs, pillars, plateforms and like machine cut bedded and jointed & pointed with white cement and pigment to match the shade of granite stone incl grinding and polishing over 20 mm thick screed bed or bedding layer in CM 1:4 complete all as specified and directed.
Taking up or down steel water tubing of 20mm dia bore and connection incl cleaning for refixing or removal to stores all as specified and as directed.
Taking up or down steel water tubing of 25mm dia bore and connection incl cleaning for refixing or removal to stores all as specified and as directed.
M&L for 20mm 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc.
M&L for 25mm 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc.
Supply & fixing in repair 15mm Stop valve/angle cock, fancy type, chromium plated with long shunk and cup (concealed type) high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed.
Supply & fixing in repair 15mm Cast copper alloy, Chromium Plated Bib tap fancy type with crutch or butterfly handle, screwed for iron pipe or for brass pipe of for ferrule and fixed.
Supply & fixing in repair CP health faucet with 1 meter flexible hose and stand all as specified and as directed by Engr-in-Charge
Supply & fixing in repair CP wall mixture with telephonic shower mixing with hot & cold water secured down for iron pipe complete all as specified and as directed by Engr-in-Charge.
Supply & fixing in repair CP centre hole basin mixture, mixing with hot & cold water secured down for iron pipe complete all as specified and as directed by Engr-in-Charge.
Supply & fixing in repair 450 mm long PVC connection 15mm bore with PTMT nuts complete all as specified.
Dismantling water storage tanks of capacity exc 250 & n.exc 500 ltrs and removing to store complete all as specified and as directed
Dismantling water storage tanks of capacity exc 500 & n.exc 1000 ltrs and removing to store complete all as specified and as directed
Supply and fixing rotational moulded polyehtylene water storage tank of 500 ltrs capacity (Cylindrical vertical with closed top) in position all as specified in SSR Part-I
Supply and fixing puf tank of capacity 500 ltrs capacity complete all as specified
Supply and fixing rotational moulded polyehtylene water storage tank of 1000 ltrs capacity (Cylindrical vertical with closed top) in position all as specified in SSR Part-I
Supply and fixing puf tank of capacity 1000 ltrs capacity complete all as specified
Supply & fixing in repair vitreous china wash hand basin white counter type 570x450mm fixed on granite slab incl waste pipe, cutting for erecting granite slab, complete all as specified.
Supply & fixing in repair one piece EWC chinaware with soft closet cover and mounted flushing cistern of size 620x370x670mm white in colour complete all as specified by Engr-in-charge.
Dismantling timber scantling as in fillets, rails, posts, rafters, purlins etc under 40 Sqcm in secction in framed work, in any position complete all as specfied and as directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets all as specified and as directed.
Supply & fixing for suspended false ceiling system using chicago metalic (E Grid) exposed suspended system, grid section size 600mm x 600 mm, comprising of GI powder coated Main Runner of diamensions 39mm x 24mm x 0.8 mm thick (Thickness comprising of GI/0.4 + PPPCGS/0.3mm & weight of runner 1.35 Kg for 3600 mm length), Cross Tee of dimensions 29mm x 24mm x 0.8mm thick and wall angle 22.2mm x 22.2mm x 0.65mm thick (Thickness comprising of GI/0.4 + PPPCGS /0.3 mm & weight of Tee of 0.195 kg for 600mm length) and wall angle of diamensions 22.2mm x 22.2mm x 3050 mm x 0.65mm thick (Thickness comprissing of GI/0.35 + PPPCGS/0.3mm & weight of angle 0.70Kg for 3050mm length) with grid system duly suspended with 4mm dia GI wire hangers fixed with steel-through fasterner from purlin of the roof complete all as specified and directed.
Providing and fixing 12 mm semi perforated calcium silicate tile size 600X600 mm complete all as specified and directed
M&L for Plain fillets of second class soft wood (KAIL), sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm in square, rectangular or traingular in section, clean sawn secured with nails or brads complete all as specified and directed.
M&L for Plain fillets of second class soft wood (KAIL), sectional area exceeding 6 Sqcm but not exceeding 13 Sqcm in square, rectangular or traingular in section, bullnosed, splayed, chamfered or rounded on one edge or face complete all as specified and directed.
M&L factory made second class soft wood wooden battens kiln dried spruce or pine profiled lumber, not less than 12mm thick, length 3000 mm & width 110-120 mm insert each other with male and female grooves fixed with nails to timber frame work as in wall/ceiling paneling, shelves etc including dismantling old wall/ceiling board any type and applying under coating and finishing coats of wood polishing complete all as specified and directed. (Make-Beliy Ruchey or equivalent in approved make)
M&L laminated wooden flooring 8mm thick size 193mm x 1214mm of High density hard wood fibre board (HDF) with highly anti abrasive protective overlay and melamine impregnated decorative film with interlocking system, laid over 2mm thick foam with suitable arrangement including dismantling of existing old one complete all as specified and directed.
Note : Deduction for amount of Rs 13,100.00 as listed in Schedule 'A' Part - II ( Schedule of Credit) shall be made while awarding of contract.
M/S MOHD ALI
M/S BHAT ENGINEERS
M/S MOHD HUSSAIN
M/S TRADE LINK
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .