Providing of street lights from TTD Transport office to new 800 KW Wind mill at GNC area, Tirumala

Supply of 75W/72W LED Day light integral IP66 street light/ Road light fittings with pressure diecast aluminium body suitable for mounting to the existing poles with 40mm to 60mm outer dia bracket (Adjustable stemp pipe) with suitable capacity of isolation constant current driver. The luminaire shall be with Lense for distribution of lighting and suitable to operate on 230V, 50Hz AC supply with the following Specification. Makes: Phillips/ Crompton Greaves/Wipro/K-Lite Halonix / ORKUS / Havells

i.) Output Luminous Flux of LED luminaire : 7500 Lumens, +5% Tolerance ii. ) Material for glass: Toughned glass. iii.) Material for LED engine : Metal core PCB. iv) Working life : >50,000 Hrs at 35oC ambient temperature with 70% lumen output. v) Make of LED used: NICHIA(Japan)/ Osram(German) / Philips Lumiled / CREE (USA)/ Bridgelux(USA)/ Seol/ Lendnim. vi) LED life : >50,000Hrs with 70% of Lumens output. vii) LED efficiency: >135/lm/w viii) Luminaire efficiency : 100 Lumens / watts +5% ix) Total system wattage including loss: 75 Watts x) Correlated colour temperature: 5500K -6500K

xi) Colour Rendering index: >70(LM80/ IS16106) xii) Input voltage and Frequency range: 230 - 240V AC, 50Hz +/-3Hz. xiii) Operative voltage: 120/140V - 270V xiv) Power factor : >0.95 (LM79/IS16105 - 2012 xv) Driver efficiency, Driver should be easily detachable & replacable : Driver efficiency (Constract current driver with isolation xvi) Total Hormonic Distortion(THD) : <10%. xvii) Conformity with IP-66 for Luminaire

Fixing of M.V / S.V / M.H luminaire / Halogen fitting on wall / pole cross arm / channel / stem pipe etc., including all labour charges and giving connections etc., complete.

Supply of 80 mm dia G.I. pipes of "B" class of ISI marked and approved by the department including cost and conveyance and all other incidental charges etc., and properties and weight as per IS 1239 marked . Make: Jindal / Appollo / TATA.

Supply, Fabrication and fixing of Single stem Pole socket fabricated with M.S. 'C' Class Pipe of 4" (100mm) dia 1/4" thick 1' 6" Long inserted with 3.15" (80mm) dia 1/4" thick 5" long M.S. 'C' Class Pipe at the top completely and welded 1 1/2" dia 'C' Class M.S.Pipe of not less than 0.6 mtr. for stem (but for extra pipe beyond 0.6 mtr., payment will be made separately).

The stem pipe is to be inserted in the socket with suitable length and welded at 0° to 20° (90° to 110° to the Pole) with the support of 3" x 3/8" M.S. Flat at bottom of stem including cost of M.S.Pipe and 14 SWG MS sheet of suitable size is to be welded on the top of the socket. One run of 2.5 Sq mm 3 core flat Copper Cable to be provided from the MS box to the given lamp fitting at the top of the pole and the work includes fixing of given lamp fitting. Two coats of enamel paint over one coat of red oxide paint is to be painted to the Socket and stem.

Supply and transportation of 16 Sq.mm 4 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.

Supply and transportation of 25 Sq.mm 3 1/2 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.

Laying of U.G cables upto 50 Sq.mm and back filling of trench including labour charges etc., complete.

Supply and making end termination with heavy Alluminium lugs (pin / ring type) upto 16 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet.

Design, Fabrication, Supply, Installation and Commissioning of Outdoor type timer box of size 600mm(W) x 600mm(H) x 300mm(D) and made with 14SWG CRCA sheet steel cleaning with 7 tank process and painting with powder coating. The box shall be made by provide rubber beeding, door knobs etc., and the front door with double leaf arrangement with hinges and locking arrangement. Suitable heat Dissipation / Air / Ventilation ducts with inside wire mesh shall be provide to the panel. The box base shall be mounted on 40x40x6mm MS angle with stand legs at 4 corners at a length of 700mm each of 40x40x6mm MS angle with necessary welding and the angles shall be painted with two coats of enamel black paint over one coat of red-oxide. The timer box legs should be fixed in ground of size 400mm depth by using 20mm HBG metal in 1:3:6 ratio. A 9 Ply - 18 mm thick plywood sheet of size 0.50 m x 0.50m to fix inside the box and the following shall be supply and fix firmly on the ply wood sheet and giving necessary connections between Isolator - contactor - timer - out going MCBs etc., with suitable size of PVC copper wires /bus links and suitable holes to be made at bottom sheet of the box for incoming / outgoing cables and install the box at site as directed during execution by the site Engineer.

a) Incoming: 63A FP Isolator - 1 No. b) Out Goings: 40A 4-pole MCB - 2 Nos. c) LED indicator lamps - 3 Nos. d) ML - 4 3 Pole, 415 V Power Contactor L & T) - 1 No. e) Togele / 6 Amps 2 Way Switch and giving connections.- 1 No. f) Digital Time Switch (L & T) - 1 No. g) An earthing terminal should be provide to the box. h) Danger name plate -1 No. i) The ratings of switches, feeder name, bus bar / cable chamber etc., shall be indicate on panel with stickering letters as directed during execution.

Supply and fixing of 205 X 255 X 112mm Sizes thermo plastic cable junction boxes with IP66/67 weather proof, for outdoor installation with konckouts for cable entry including 1 No. 6 to 32A SP MCB & terminals etc., complete (sizes in mm) Make : Hensel / Sadhrish / Sintex

Cutting open cement concrete road

Plastering in CM (1:6) with 12mm thick using river sand including curing, conveyance of materials etc.,

Earth Work excavation for trench for laying of U.G. Cable in ordinary Soils, manual means to the required width and depth and depositing the same on bank as directed during execution etc., complete .

Providing independent earthing with 2Kgs. (15mts.) of No. 8 SWG GI wire for coil earthing in an earth pit of size 2'x2'x4' and filled with alternate layers of 20 Kgs. Of hard coke, 10 Kgs. of salt and required quantity of sand and connecting the GI wire to the pole/ pipe with 3/8" x 3" GI bolts and nuts and washers as directed during execution.

Only erection of 6 to 8 meters length of given Steel Tubular Pole in an earth pit of size 2' x 2' x 5' and concreting in C.C. 1:3:6 with 40mm HBG Crushed metal to full width over bed concrete(6") to a height of 4 ½'' (up to ground level) in all soils and filled with sand to a height of 6" and base concreting with C.C (1:3:6) using 40mm HBG Crushed Metal for full width and up to ground level over concrete bed of 6" height and coping should be done to a height of 2 1/2' with round/square/hexagonal shape using 20mm HBG Crushed metal in C.C. (1:3:6) and plastering neatly with 12mm thick in C.M (1:5). The Pole has to be painted with 2 coats of enamel paint from coping to a height of 1.00 mtr and painting the remaining pole with 2 coats of Aluminum paint over one coat of red oxide paint as directed during execution. (Poles will be supplied departmentally and conveyance by the Contractor at his cost from Stores to Site).

Supply and fixing of fabricated M.S clamps made out of 25mm x 3mm MS flat with necessary holes on either side with suitable 1 1/2" coach screws and painting 2 coats of enamel black paint over one coat of red oxide suitable for fixing of UG Cables of size 25 Sq.mm to 50 Sq.mm on walls etc., including all labour charges etc., complete.

NOTE (i)The rates are of basic rates excluding GST. (ii) The applicable GST will be reimbursed/paid as per actuals on production of proof. (iii)Statutory deductions will be made as per norms, if applicable. Any modalities imposed on GST by the Government from time to time, the same will be implemented.

Supply of 75W/72W LED Day light integral IP66 street light/ Road light fittings with pressure diecast aluminium body suitable for mounting to the existing poles with 40mm to 60mm outer dia bracket (Adjustable stemp pipe) with suitable capacity of isolation constant current driver. The luminaire shall be with Lense for distribution of lighting and suitable to operate on 230V, 50Hz AC supply with the following Specification. Makes: Phillips/ Crompton Greaves/Wipro/K-Lite Halonix / ORKUS / Havells

i.) Output Luminous Flux of LED luminaire : 7500 Lumens, +5% Tolerance ii. ) Material for glass: Toughned glass. iii.) Material for LED engine : Metal core PCB. iv) Working life : >50,000 Hrs at 35oC ambient temperature with 70% lumen output. v) Make of LED used: NICHIA(Japan)/ Osram(German) / Philips Lumiled / CREE (USA)/ Bridgelux(USA)/ Seol/ Lendnim. vi) LED life : >50,000Hrs with 70% of Lumens output. vii) LED efficiency: >135/lm/w viii) Luminaire efficiency : 100 Lumens / watts +5% ix) Total system wattage including loss: 75 Watts x) Correlated colour temperature: 5500K -6500K

xi) Colour Rendering index: >70(LM80/ IS16106) xii) Input voltage and Frequency range: 230 - 240V AC, 50Hz +/-3Hz. xiii) Operative voltage: 120/140V - 270V xiv) Power factor : >0.95 (LM79/IS16105 - 2012 xv) Driver efficiency, Driver should be easily detachable & replacable : Driver efficiency (Constract current driver with isolation xvi) Total Hormonic Distortion(THD) : <10%. xvii) Conformity with IP-66 for Luminaire

Fixing of M.V / S.V / M.H luminaire / Halogen fitting on wall / pole cross arm / channel / stem pipe etc., including all labour charges and giving connections etc., complete.

Supply of 80 mm dia G.I. pipes of "B" class of ISI marked and approved by the department including cost and conveyance and all other incidental charges etc., and properties and weight as per IS 1239 marked . Make: Jindal / Appollo / TATA.

Supply, Fabrication and fixing of Single stem Pole socket fabricated with M.S. 'C' Class Pipe of 4" (100mm) dia 1/4" thick 1' 6" Long inserted with 3.15" (80mm) dia 1/4" thick 5" long M.S. 'C' Class Pipe at the top completely and welded 1 1/2" dia 'C' Class M.S.Pipe of not less than 0.6 mtr. for stem (but for extra pipe beyond 0.6 mtr., payment will be made separately).

The stem pipe is to be inserted in the socket with suitable length and welded at 0° to 20° (90° to 110° to the Pole) with the support of 3" x 3/8" M.S. Flat at bottom of stem including cost of M.S.Pipe and 14 SWG MS sheet of suitable size is to be welded on the top of the socket. One run of 2.5 Sq mm 3 core flat Copper Cable to be provided from the MS box to the given lamp fitting at the top of the pole and the work includes fixing of given lamp fitting. Two coats of enamel paint over one coat of red oxide paint is to be painted to the Socket and stem.

Supply and transportation of 16 Sq.mm 4 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.

Supply and transportation of 25 Sq.mm 3 1/2 core LT XLPE insulated, 1100V grade armoured Aluminium UG cable as per specification confirming to IS:7098 (Part-I) / 1554-1. Grade-A: Make: Torent / Universal / Unistar / Havells / KEI / Gloster / Polycab / RR Kabel / Finolex.

Laying of U.G cables upto 50 Sq.mm and back filling of trench including labour charges etc., complete.

Supply and making end termination with heavy Alluminium lugs (pin / ring type) upto 16 Sq.mm cable as per IS specification duly crimped with crimping tool, PVC tape etc., complete. Make: Dowels / Jainson / Comet.

Design, Fabrication, Supply, Installation and Commissioning of Outdoor type timer box of size 600mm(W) x 600mm(H) x 300mm(D) and made with 14SWG CRCA sheet steel cleaning with 7 tank process and painting with powder coating. The box shall be made by provide rubber beeding, door knobs etc., and the front door with double leaf arrangement with hinges and locking arrangement. Suitable heat Dissipation / Air / Ventilation ducts with inside wire mesh shall be provide to the panel. The box base shall be mounted on 40x40x6mm MS angle with stand legs at 4 corners at a length of 700mm each of 40x40x6mm MS angle with necessary welding and the angles shall be painted with two coats of enamel black paint over one coat of red-oxide. The timer box legs should be fixed in ground of size 400mm depth by using 20mm HBG metal in 1:3:6 ratio. A 9 Ply - 18 mm thick plywood sheet of size 0.50 m x 0.50m to fix inside the box and the following shall be supply and fix firmly on the ply wood sheet and giving necessary connections between Isolator - contactor - timer - out going MCBs etc., with suitable size of PVC copper wires /bus links and suitable holes to be made at bottom sheet of the box for incoming / outgoing cables and install the box at site as directed during execution by the site Engineer.

a) Incoming: 63A FP Isolator - 1 No. b) Out Goings: 40A 4-pole MCB - 2 Nos. c) LED indicator lamps - 3 Nos. d) ML - 4 3 Pole, 415 V Power Contactor L & T) - 1 No. e) Togele / 6 Amps 2 Way Switch and giving connections.- 1 No. f) Digital Time Switch (L & T) - 1 No. g) An earthing terminal should be provide to the box. h) Danger name plate -1 No. i) The ratings of switches, feeder name, bus bar / cable chamber etc., shall be indicate on panel with stickering letters as directed during execution.

Supply and fixing of 205 X 255 X 112mm Sizes thermo plastic cable junction boxes with IP66/67 weather proof, for outdoor installation with konckouts for cable entry including 1 No. 6 to 32A SP MCB & terminals etc., complete (sizes in mm) Make : Hensel / Sadhrish / Sintex

Cutting open cement concrete road

Plastering in CM (1:6) with 12mm thick using river sand including curing, conveyance of materials etc.,

Earth Work excavation for trench for laying of U.G. Cable in ordinary Soils, manual means to the required width and depth and depositing the same on bank as directed during execution etc., complete .

Providing independent earthing with 2Kgs. (15mts.) of No. 8 SWG GI wire for coil earthing in an earth pit of size 2'x2'x4' and filled with alternate layers of 20 Kgs. Of hard coke, 10 Kgs. of salt and required quantity of sand and connecting the GI wire to the pole/ pipe with 3/8" x 3" GI bolts and nuts and washers as directed during execution.

Only erection of 6 to 8 meters length of given Steel Tubular Pole in an earth pit of size 2' x 2' x 5' and concreting in C.C. 1:3:6 with 40mm HBG Crushed metal to full width over bed concrete(6") to a height of 4 ½'' (up to ground level) in all soils and filled with sand to a height of 6" and base concreting with C.C (1:3:6) using 40mm HBG Crushed Metal for full width and up to ground level over concrete bed of 6" height and coping should be done to a height of 2 1/2' with round/square/hexagonal shape using 20mm HBG Crushed metal in C.C. (1:3:6) and plastering neatly with 12mm thick in C.M (1:5). The Pole has to be painted with 2 coats of enamel paint from coping to a height of 1.00 mtr and painting the remaining pole with 2 coats of Aluminum paint over one coat of red oxide paint as directed during execution. (Poles will be supplied departmentally and conveyance by the Contractor at his cost from Stores to Site).

Supply and fixing of fabricated M.S clamps made out of 25mm x 3mm MS flat with necessary holes on either side with suitable 1 1/2" coach screws and painting 2 coats of enamel black paint over one coat of red oxide suitable for fixing of UG Cables of size 25 Sq.mm to 50 Sq.mm on walls etc., including all labour charges etc., complete.

NOTE (i)The rates are of basic rates excluding GST. (ii) The applicable GST will be reimbursed/paid as per actuals on production of proof. (iii)Statutory deductions will be made as per norms, if applicable. Any modalities imposed on GST by the Government from time to time, the same will be implemented.

(Rupees Ten lakhs fifty six thousands six hundred thirty five and paise thirty two only)