REPAIRS OF DG SETS AND SWIMMING POOL FILTERATION PLANT AND EM EQUIPMENTS AND REPAIR WORK OF UG SUMP AND OH TANKS AT SECTOR A AND B UNDER GE (A) BARODA

Amount

Labour only for taking out of non clogging type submersible sewage pump set 7.5 HP capacity with the help of chain pully block mechanism complete including dismantlling for replacement of following accessories including lowerning, reinstalling in same position after servicing, oiling, greasing and testing complete. Note : Chain pulley bolck shall be provided by contractor.The parts replaced shall be measured and paid seperately.

M & L for rewinding of motor of 7.5 HP of non clogging type submersible sewage pump set with suitable gauge super enamelled copper winding wire duly coated with insulating varnish & using other insulating material including testing complete.

M & L rubber gasket for pump 7.5 HP.

M & L double seal bearing for 7.5 HP pump set , set of two as per sample.

M & L Mechanical seal complete with oil for 7.5 HP

M & L Oil seal for 7.5 HP pump set as per sample

M & L Construction of brick masonary valve pit chamber complete of size 1200 mm X 1200 mm X 1200 mm(internal dimension) with 3 mm thick sheet with MS angle iron frame of size 50x50x6mm as top cover ,with locking arrangement ,brick wall 23 cm thick built in CM 1:6 , plasterd with 15 mm thick CM 1:4, PCC bed ,all as per TD/2004/26 including necessary excavation & earth work in any type of soil and two coats of anti corrosive paint over one coat of zinc chromate primer to steel surface complete.

M & L replacement of weather proof flexible copper conductor submersible cable of size 6 Sqmm as per suitable for 3-phase submersible sewage pump, PVC/Rubber un-sheathed, unarmoured suitable for submersible sewage pump complete.

General servicing of following DG set including cleaning of machines, fuel tank etc checking of oil levels, filters, fan belts, hose pipe, proper adjustment of tappet, checking of governor assembly, radiator complete all as per manufacturers recommendations including replacement of Fuel filter, Engine oil filters, etc complete as per direction of Engr-in-Charge. Note :- Engine oil & Coolant wii be measured and paid separately under subsequent items

100 KVA ( Make- Kirloskar / Mahindra & Mahindra / Ashok Leyand )

62.5 / 63 KVA ( Make- Ruston / Kirloskar / Greaves / Mahindra / Ashok Leyand / Sudhir / CG )

30/35 KVA ( Make- Ruston / Kirloskar / Greaves / Mahindra / Ashok Leyand / Sudhir / CG )

Repairs to DG set engine of capacity 62.5 / 63 KVA / 30/35 KVA any make, 6 cylinder, 1500 RPM, water cooled by dismantling/strip opening of the DG set for top overhauling by removing the cylinder heads, piston, connecting rod, cylinder liner, oil sump and injector etc including calibration of engine and reassembling of the complete engine as per the manufacturer instruction and testing of efficiency of engine on completion complete all as directed. (worn out / unserviceable parts shall be replaced with new one and shall be measured and paid seperately)

Piston assy as per existing model complete all as directed

Ring set as per existing model complete all as directed.

Cylinder liner as per existing model complete all as directed

Set of liner 'O' ring as per existing model complete all as directed

Gasket set kit as per existing model complete all as directed

Coupling as per existing model complete all as directed

Gasket (Main Seal) as per existing model complete all as directed

Diesel Pipe Set as per existing model complete all as directed

Hose Pipe vas per existing model complete all as directed

Hose Clamp as per existing model complete all as directed

Cylinder head gasket as per existing model complete all as directed

Cylinder head 'O' Ring as per existing model complete all as directed

Valve set as per existing model complete all as directed

Valve seal as per existing model complete all as directed

Valve guide as per existing model complete all as directed

Connecting rod bearing as per existing model complete all as directed

Connecting rod bush as per existing model complete all as directed

Fan Belt as per existing model & size complete all as directed

Repairs to DG set engine of capacity 100 KVA any make, 6 cylinder, 1500 RPM, water cooled by dismantling/strip opening of the DG set for top overhauling by removing the cylinder heads, piston, connecting rod, cylinder liner, oil sump and injector etc including calibration of engine and reassembling of the complete engine as per the manufacturer instruction and testing of efficiency of engine on completion complete all as directed. (worn out / unserviceable parts shall be replaced with new one and shall be measured and paid seperately)

Piston assy as per existing model complete all as directed

Ring set as per existing model complete all as directed.

Cylinder liner as per existing model complete all as directed

Set of liner 'O' ring as per existing model complete all as directed

Gasket set kit as per existing model complete all as directed

Coupling as per existing model complete all as directed

Gasket (Main Seal) as per existing model complete all as directed

Diesel Pipe Set as per existing model complete all as directed

Hose Pipe vas per existing model complete all as directed

Hose Clamp as per existing model complete all as directed

Cylinder head gasket as per existing model complete all as directed

Cylinder head 'O' Ring as per existing model complete all as directed

Valve set as per existing model complete all as directed

Valve seal as per existing model complete all as directed

Valve guide as per existing model complete all as directed

Connecting rod bearing as per existing model complete all as directed

Connecting rod bush as per existing model complete all as directed

Fan Belt as per existing model & size complete all as directed

Replacement of defective / unserviceable Engine Oil 20 W 40 or equivalent grade suitable for DG set at various locations. Make: Castrol/ Servo

Supply and filling concentrated coolant for radiator in 5 litre capacity container complete all as directed,

S & F the battery of 12 V 180 AH suitable for DG set Make : Exide/ Amaron.

M& L for rewinding of monoblock pump motor set of 10 HP/7.5 HP of swimming pool with suitable gauge copper winding wire after taking out burnt winding wire , varnishing, insulating mtrl etc complete all as specified as directed

Supply only TCCA 90 (Trichloroisocyanuric Acid) in containers.

Supply only Alumn

Supply only copper sulphate

Supply only Bleaching powder min 25 % contained Chlorine

S&F nylon brush for suction sweeper as per sample as directed by Engr in Charge

S & F of on load change over switch in sheet steel enclosure four pole, 415volt, front handle operated of capacity 200 Amp complete, change over switch fixed in panels or on walls as per site requirement including taking down old UNSV change over switch any make and type all as specified and directed. Make- C & S Legrand / ABB / Havells

M & L for caulking of lead joint of spigot and socket cast iron pipe incl providing lead wool and making joint leak proof including necessay earth work/excavation and making good disturbed site, T & P and draining out water etc of following as directed.

150 mm bore

100 mm bore

S & F in repair Gun metal gate valve iron wheel head screwed both ends for GI steel tubing suitable for 50 mm bore of pipe

S & F in repair Gun metal gate valve iron wheel head screwed both ends for GI steel tubing suitable for 40 mm bore of pipe

S & F Green suction hose pipe medium duty ISI marked of size 80 mm inner dia with wall thickness not less than 5.0 mm suitable for working pressure 8.0 Kg/ Sq cm & bursting pressure 15.0 Kg/ Sq cm complete.

S&F in repair sluice valve cast iron both ends flanged class PN-1.6 conforming to IS-14846 with stainless steel spindle including joints & jointing materials (Rubber gasket, nut, bolts,washers etc) complete of following sizes Make Kirloskar/ Kartar/Leader

150 mm bore

100 mm bore

S&F, for CI/DI special bends (any type radius & angle), tappers any type (straight bend increasing or decreasing or double socket etc) tee pieces single branch ‘Y’ junction double branch cross (all sockets or socket & spigot) collars caps plug etc up to 150 mm bore for spigot & socket and socket pipes.

FAIZA ENTERPRISE (BID ID -3126931)

City Light (BID ID -3115661)