REPAIR /REPLACEMENT/MAINT OF UNSERVICEABLE INTERNAL WIRING, LIGHT FITTINGS, LT OVERHEAD LINES, UG CABLES, EXTERNAL WATER SUPPLY SYSTEM AND OTHER MISC E/M CONNECTED ALLIED WORKS AT NARENDRA NAGAR and REPAIR/ REPLACEMENT OF OLD UNSV SECURITY LIGHT

Amount

Narendar Nagar Area

Taking down carefully surface aluminium or copper point wiring with PVC casing-caping or conduit (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, regulators, sockets, light fittings etc and making good disturbed surfaces complete.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed/surface rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and unwelded sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators as required for the following :-

One light point controlled by one switch.

One fan point controlled by one switch.

One socket outlet 6 amp controlled by one switch on the same board with other switches.

One socket outlet 6 amp controlled by one switch on indepdendent board.

One bell point controlled by one bell push.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed/surface rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets as required for one 16 amp socket outlet point controlled by one switch on independent board.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including PVC casing-caping not less than 32x16 mm ISI marked ivory colour with all fittings / fixing accessories and unwelded sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators as required for the following :-

One light point controlled by one switch.

One fan point controlled by one switch.

One socket outlet 6 amp controlled by one switch on the same board with other switches.

One socket outlet 6 amp controlled by one switch on indepdendent board.

One bell point controlled by one bell push.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including PVC casing-caping not less than 32x16 mm ISI marked ivory colour with all conduit fittings / fixing accessories and unwelded sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets for one 16 amp socket outlet point controlled by one switch on independent board.

S&F angle holder, insulated polycabonate body with back plate complete. Make - Havells Reo / Anchor Penta PC / SSK as approved.

S&F switch piano flush button single pole one way 6 amp complete. Make - Havells Reo / Anchor Penta PC / SSK as approved.

S&F switch piano flush button single pole one way 16 amp complete. Make - Havells Reo / Anchor Penta PC / SSK as approved.

S&F bell push, flush type, 6 amp 240 volts complete. Make - Havells Reo / Anchor Penta PC / SSK as approved.

S&F door bell, AC, 240 volts, single pole complete. Make - Havells Reo / Anchor Penta PC / SSK as approved.

S&F socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete. Make - Havells Reo / Anchor Penta PC / SSK as approved.

S&F socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete. Make - Havells Reo / Anchor Penta PC / SSK as approved.

S&F ceiling rose 3 plates polycarbonate body complete. Make - Havells Reo / Anchor Penta PC / SSK as approved.

S&F hum free electronic step fan regulator 120 - 280 volts of 100 watt capacity (socket type) including connecting up complete. Make - Havells Reo / Anchor Penta PC / SSK as approved.

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FRLS multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories of following nominal sizes:-

2x4 sqmm + 1x4 sqmm earth wire in 20 mm dia conduit.

2x6 sqmm + 1x6 sqmm earth wire in 25 mm dia conduit.

M&L for earthing with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I connected to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 metre beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C1 with RCC 1:2:4 type B-1 40 mm thick cover reinforced with 6 mm dia M.S bars 3 nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work complete.

S&F MCB distribution board, powder coated, CRCA steel sheet, degree of protection IP 43 - IK 09 with reversible double door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required with following ratings & ways:-

SPN, 240 volts, 4 ways. Make - Legrand cat ref no 507610 or equivalent in Schneider or Hager as approved.

SPN, 240 volts, 8 ways. Make - Legrand cat ref no 507611 or equivalent in Schneider or Hager as approved.

SPN, 240 volts, 12 ways. Make - Legrand cat ref no 507612 or equivalent in Schneider or Hager as approved.

TPN, 415 volts, 4 ways. Make - Legrand cat ref no 507670 or equivalent in Schneider or Hager as approved.

S&F MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:-

Single pole 6 to 32 amp. Make - Legrand cat ref no 408587 to 408595 or equivalent in Schneider or Hager as approved.

Double pole 10 to 32 amp. Make - Legrand cat ref no 408631 to 408636 or equivalent in Schneider or Hager as approved.

Double pole, 40 to 63 amp. Make - Legrand cat ref no 408637 to 408639 or equivalent in Schneider or Hager as approved.

Four pole 40 to 63 amp. Make - Legrand cat ref no 408700 to 408702 or equivalent inSchneider or Hager as approved.

Note for MCBs & MCB DBs:- MCCBs, MCBs & MCB DBs shall be of the same make.

S&F LED batten (1.2 m) The smart, contemporary design of mirror light extruded polycarbonate, environmental friendly, energy efficient 20 watt including making connections with twin core PVC insulated copper conductor cable 1.5 sqmm from ceiling rose complete all as specified. Make: Havells model No.Austra LED Batten 20 W 6500 K or equivalent in other specified make as approved.

S&F LED fixture 9 watt including connection Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficientall as per Havells model No.LED Pride Plus Neo Batten 10 W 6500 K or equivalent in other specified make as approved.

Supply and fixing in replacement building security light LED with heat resistant toughened glass, 30 Watt, with best in class design & Robust heat sink along with class leading IP, IK & Surge protections for long lasting performance including up to 2.5 mtr twin core copper conductor for connection for light fitting from LT OH line/ ceiling rose including taking down old UNSV lights all as specifeid and directed. by Engineer-in-Charge. Make :-Havells model No.Superb Street Light 30 W 6500 K IP65 or equivalent in equivalent in Wipro/CG.

S&F energy efficient Ultra modern recess mounting luminaire with high performance LEDs, suitable for mounting with Armstrong/ Grid ceiling. with flat diffuser and lumen output of 3300 lumens having constant current electronic driver duly connected with 0.5 sqmm white colour PVC insulated & sheathed three core flexible multi stranded copper conductor cable in renewal of any type luminaire as required. Make - Havells Model No. 2X2 PANEL 36 W 6500 K or equivalent in Wipro or Crompton Greaves as approved.

S & F in replacement with new Bracket for street light fitting made out of GI tubing 40 mm med grade pipe 2' x 1 -1/2' 135 degree bend with cutting , welding and two MS bracket with nut bolts and washer bracing to pole/on fencing for street light fittings including taking down old UNSV brackets all as specifeid and directed.

S& F in replacement LED bulb 9 w, cool day light, B 22 base, AC 230/240 V all as specified and directed. Make: Havellc/Wipro/Crompton Greaves

Excavation in soft / loose soil in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out complete.

Returning filling with earth obtained from excavation including spreading watering and consolidation in layers not exceeding 25 cms thick complete.

Removing surplus soil to a distance not exceeding 50 m and depositing at a level not exceeding 1.5 m above the starting point complete.

M&L for PCC 1:3:6 typeB-1 using 20 mm graded broken stone aggregate as in mass concrete in foundations etc complete all as specified and directed .

S&F Steel tubes of 40 mm dia ISI marked light grade galvanised with all fittings fixed to walls / poles / laid in road crossing etc as required of following sizes:-

M&L for cross arms support clamps fabricated from steel incl nuts, bolts and washers, welding, bending, drilling holes in any shape and size all as indicated and directed including one primer coat, one under coat and one finishing aluminium paint

Supllying and fixing Shackle type, porcelain, vitreous, white, brown or green insulator including galvanized mild steel straps, washers, insulator bolts, washers and nuts 50 mm height,65 mm dia for 550 volts grade comlete.

Suuplying and fixing loop type insulator, porcelain,vitreous white brown or green, large size with overall dimensions 90x140mm and clearance dia of hole 25 mm complete.

M&L for galvanized stay strand of size 7/4mm all as directed.

Supply and Replacement in repair of Stay assembly complete with accessories i.e stay plate 300mm x 300mm x 6mm, galvanized thimbles with 20mm dia stay rod coplete with accessories as shown in Electrical plate No.1(Loop type insulators, stay clamps, excavation and concrete measured seperately.)

Material and labour for ACSR conductor squirrel to dog (6/1/2.11 to 6/1/4.72) any size drawn straignt horizontal on over head lines on existing poles including binding with insulators.Weight of conductor shall be measured straight horizontal distance between centre of two adjacent poles and calculating weight of conductor of size and length by adding 3% extra for sag ,jointing jumpers,etc complete all as specified and directed.

M&L for galvanized iron steel wire 4 mm dia drawn straight horizontal as continous earth wire on HT/LT poles

Supply and fix in replacement of 1100 Volts grade heavy duty cable PVC insulated aluminum conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm suspension wire, one twin core cable flat or circular of size of aluminum conductor 6 sq mm stranded conductor including taking down old unserviceable cable all as specified and directed.

Supplying, laying or fixing or passing through pipe, testing and commissioning 1100 volts grade ISI marked XLPE insulated and PVC sheathed steel tape / wire armoured underground stranded aluminium conductor cable of following sizes including taking out unserviceable old cables.- (Make - Havells / Polycab / Finolex / Universal or eqivalent as approved)

(a) 10 sqmm 2 core

(a) 16 sqmm 2 core

(c) 25 sqmm 4 core

(d) 50 sqmm 3.5 core

Dismantling cross-arms of M.S. channel or angle sections etc. complete and setting aside for re-use with in 50m

Dismantling insulators any type any size.

Dismantling stay assembly.

Dismantling GI earth wire.

Dismantling ACSR conductors.

Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 M below ground level, earth plate surrounded by 15cm thick and packed with layers of charcoal dust and common salt , earth lead of galvanised iron strip of size 25x4 mm connectd to GI earth plate elcectrode by means of bolts, nuts, check nuts and washers of galvanised iron and thimbles and other end of earth wire connected to main switch board and protected by galvanised iron pipe medium grade 15mm bore and 20mm bore light gradeGI pipe with funnel and wire mesh for watering including necessary excavation and earth works. PCC Chamber in cement concrete 1:3:6 type C-2 & RCC cover in M-20 (Design mix ) and all as shown in Electrical Plate No. 3 of SSR ( Part-I) of 2009 and testing on completion. (Note : Earth result should not exceed 2 Ohms)

S&F in replacement of MCCB 63amp, 4 pole, 16KA (Ics=100% Icu) thermally adjustable between 70% to 100% with spreader links on both sides as per Legrand cat ref no. 4200 13 or equivalent in Schneider or Hager as approved.

S&F in replacement of MCCB 63amp,3 pole, 16KA (Ics=100% Icu) thermally adjustable between 70% to 100% with spreader links on both sides as per Legrand cat ref no. 420003 or equivalent in Schneider or Hager as approved.

S&F in replacement of MCCB 100 amp,4 pole, 16KA (Ics=100% Icu) thermally adjustable between 70% to 100% with spreader links on both sides as per Legrand cat ref no. 420015 or equivalent in Schneider or Hager as approved.

S&F in replacement of MCCB 125 amp, 4 pole, 16KA (Ics=100% Icu) thermally adjustable between 70% to 100% with spreader links on both sides as per Legrand cat ref no. 420016 or equivalent in Schneider or Hager as approved.

S&F in replacement of MCCB 160 amp, 4 pole, 25 KA (Ics=100% Icu) thermally adjustable between 70% to 100% with spreader links on both sides as per Legrand cat ref no. 4200 57 or equivalent in Schneider or Hager as approved.

S&F in replacement of MCCB 250 amp, 4 pole, 25 KA (Ics=100% Icu) thermally adjustable between 70% to 100% with spreader links on both sides as per Legrand cat ref no. 4202 19 or equivalent in Schneider or Hager as approved.

Supply and fixing in replacement with new LED Street light luminaries in a single piece, IP 65 powder coated pressure die cast aluminium SMD LED street light in white colour with heat resistant toughened glass, 50 Watt, with best in class design & Robust heat sink along with class leading IP, IK & Surge protections for long lasting performance.including up to 2.5 mtr twin core copper conductor for connection of street light fitting from LT OH line/ ceiling rose including taking down old UNSV street lights all as specifeid and directed. by Engineer-in-Charge. Make :-Havells model No.Superb Street Light 50 W 6500 K IP65 or equivalent in equivalent in Wipro/CG.

Supply and fixing in replacement with new LED Flood light in a single piece, IP 66 powder coated pressure die cast in white colour with heat resistant toughened glass, 100 Watt, having Flood Lights with best in class design & Robust heat sink along with class leading IP, IK & Surge protections for long lasting performance including up to 2.5 mtr twin core copper conductor for connection of flood light fitting from LT OH line/ ceiling rose including taking down old UNSV flood lights all as specifeid and directed by Engineer-in-Charge Make :- Havells, modelNo. Centura Neo LED Flood Light 100 W 6500 K IP66 or equivalent in / CG/ / Bajaj /C & S.

Supply and fixing in replacement with new Gate lights Crown shaped post top lantern in soothing opal finish made up of Polycarbonate, suitable LED lamp B22 base. including taking down old UNSV flood lights all as specifeid and directed. Make:- Havells model No.Upto 1 N x 20 W LED Lamp or equivalent in equivalent in Wipro/CG.

S & F in replacement with new Bracket for street light fitting made out of GI tubing 40 mm med grade pipe 2' x 1 -1/2' 135 degree bend with cutting , welding and two MS bracket with nut bolts and washer bracing to pole/on fencing for street light fittings including taking down old UNSV brackets all as specifeid and directed.

M&L for sand filling in trenches with clean dry fine sand unwashed including gently punning around cables complete.

Supplying and laying old size bricks, common burnt clay building bricks sub class 'B' designation 75 laid in trenches over sand for cable protection complete.

Restringing/restretching aluminium conductor on existing over head lines above including necessary binding with binding wire with insulator , connections of incoming and out going cables including repair/replacement of ACSR conductor whereever required complete all as specified and directed. Note: Five number of conductors together shall be measured as one span from pole to pole.

M&L for painting of 9.0 m long swaged poles along with cross arm/clamps with aluminium paint one under coat and one finishing coat after preparation of old steel surfaces including making of alternate colour bands red & white 30 cms width upto a height of 1.5 m from pole coping with synthetic enamelled paint.

Numbering of poles with yellow synthetic enamelled paint with letters of size not less than 50mmx10mm(HeightxWidth) compete all as specified and directed.

Supply and fix in replacement cable separator heavy duty made of plastic with PVC clamps heavy duty three phase separator complete all as specified and directed.

S&F in repairs tubes medium grade galvanised with required all new fitting ISI marked fixed on wall/floor with fixing arrangement of following sizes:-

(a) 15 mm bore

(b) 20 mm bore

(c) 25 mm bore

(d) 40 mm bore

(e) 50 mm bore

(f) 80 mm bore

(g) 100 mm bore

Supply and fixing in replacement of gun metal globe or gate valve ISI marked with iron wheel head screwed both ends for iron pipes of following sizes:-Make: Kirloskar/Upadhyaya /Zoloto as approved.

(a) 15 mm bore

(b) 20 mm bore

(c) 25 mm bore

(d) 40 mm bore

(e) 50 mm bore

M&L for framed work such as grill, gratings etc with ends of bars shoulders and/or riveted or forged into spikes, framed guardbars,barred iron doors, ladders,framed balusers, walk ways railings, framework or water tanks and similar work confirming to fe 290, Gde-E-165

Supply and fixing in replacement of cast iron sluice valve class PN-1.0 ISI marked, both ends flanged, stainless steel spindle, with iron wheel and necessary jointing materials, nuts & bolts, washers etc for making two flanged joints of following sizes as required:- Make: Kirloskar/Upadhyaya /Zoloto or equivalent as approved.

(a) 80 mm bore

(b) 100 mm bore

Construction of brick masonry valve pit chamber with 3 mm thick MS sheet cover and 40 x 40 x 6 mm angle iron frame embedded in PCC coping 1:3:6 type C-1 using 20 mm graded stone aggregates with locking arrangements of size 1200 mm x 1200 mm x1200 mm (internal size), depth 500 mm, brick work in cement mortar 1:4 using sub class ‘B’ (old size) bricks, internal walls plastered with 15 mm thick cement mortar 1:4 and finishing the surface even and smooth using extra cement, 40 mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate in coping, PCC 1:4:8 type D-2 using 40 mm graded stone aggregates in foundation 75 mm thick with and including necessary excavation & earth work in soft / loose soil complete.

M&L for rewinding of centrifugal motor of any make and capacity 3 HP with super enamelled copper conductor of existing size of approved make after dismantling from foundation, cleaning slots with CTC solution including transportation to workshop and return to site after repair, refixing in position and testing on full load complete all as specified and as directed.

M&L for repair of centrifugal pump of any make and capacity 3 HP,greasing oiling and replacement of warn out spare parts like ball bearings,gland plate, impeller and repair to shaft etc including dismantling from foundation, transportation to workshop and return to site after repair, refixing in position and testing on full load complete all as specified and as directed.

TEKLA, SUKHI AND HARSHIL

Supply and replacement in repair of street light fitting 60 watt LED, IP-66 protection, single peice pressure die cast aluminium housing high grade powder coated finish with heat resistant toughned clear glass cover for lamp and control gear compartment with high voltage surge protection device up to 5 KV, prewired including Note :-Rates quated by contractor are deemed to be inclusive of pvc haevy duty conduit mounted with clamp with pole along with 3 coe 1.5 sqmm PVC insulated PVC sheathed copper multistranded conductor ISI marked from MCB box to street light complete all as specified. Make of LED light :- CG /Phillips/Havells or equivalent

Supply and replacement in repair, laying & testing of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminum conductor of size 10 sqmm 2 core all as per IS , specified & directed. Make : Havells/Polycab/Finolex or equivalent

All as per Item No 3 here-in-before but of size 16 Sqmm 2 core

All as per Item No 3 here-in-before but of size 16 Sqmm 4 core

All as per Item No 3 here-in-before but of size 50 Sqmm 3.5 core

Supply & Replacement in repair Pole mounted junction box/cut-out box/fuse box for road/street lighting for LED based lighting system including MCB SP 6 amps 01 Nos , 02 Nos busbar aluminium mounted on pole by means of MS clamps etc all as directed. Make- sintex/Universal/hensel

Supplying, install and errecting steel tubular swaged welded pole, 9.0 meter long, conforming to IS-2713 part-II, type 410 SP-31, complete with cast iron/MS base plate 6mm thick and of size 300x300mm, finial taper, pole cap, bolts, nuts, washers & screws etc., pole made out of ERW M.S. tubing including of holes of reqd Nos and size for fixing of cross arms,Excavation, earth work , coping and PCC in foundation for erecting of poles etc painting with one coat of red oxide primer and two coats of aluminium paint for exposed surfaces and two coats of black bituminous paint for portion embedded in concrete, painting three signal red colour bends at lower portion of exposed pole starting from plinth block , each band of 300mm height at 300mm spacing, painting pole No with the black paint by stenciled letters/figures of 8cm height complete all as specified and directed by Engr-in-charge.

M&L Earthing for panel and other machinery/eqpt using GI strip as earth lead and MS galvanized steel earth plate electrode 600x600x 6.3mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate is not less than 1.5 mtr below normal ground level connected to galvanized iron strips 32x6mm with GI pipe, nuts, bolts and washers complete upto and including test point made out of 40x3mm GI flat, PCC pit of required size in PCC 1:2:4 type B1 and RCC cover with frame, charcoal, common salt15cm at round the earth plate watering pipe 20mm med grade/galvanized and 40mm dia GI pipe light grade for GI strip protected steel with funnel complete all as specified and directed as shown in electrical plate No 3 of SSR Part-I 2009. NOTE : If the desired earth resistence is not found , earthing shall be re-done by the Contractor at No Extra Cost paid by the Dept.

Supply and Replacement in repair of aluminium strip 25 x 3.15mm with saddles and fixing screws, insulators rawal plugs etc for conductor for roof and fixed on wall upto test point all as specified.

Supply and Replacement in repair of single pointed air termination Aluminium rod 12mm dia, 300 mm long

S&F in replacement of Wooden block Heavy weight of size 30x30x30cm with hole of 20cm for fixing of air termination rods of any size incl dismantling and taking old unsv one block complete all as specified and directed

Supply and Replacement in repair of Test point terminal block made of gun metal or phosphorous bronge 75 x 75 x 25mm of 6mm thickness drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal head brass screws including box of size 90 x 90 x 90mm made of 1.6mm plain sheet and screwed to wall for protection of test point completed all as specified.

Supply and Replacement in repair of GI tubing med grade with all fitting for passing cables under road/ paths 40mm dia complete all as specified and directed

Excavation in trenches not exc. 1.5 m wide and not exc. 1.5 in depth for foundation of poles, stay assy etc. and getting out in hard / dense soil complete all as specified and directed

Returning filling in including spreading levelling watering and well ramming in layers not exc. 25 cm thick each complete all as specified and directed

Removing excavated material to a distance not exc. 50 mtr and depositing where directed at a level not exc. 1.5 mtr above the starting point of any type of soil complete all as specified and directed

Supply and laying Sand for cushioning purpose of floors and laying of cables including watering and consiolidation.

M&L for providing new sub class 'B' bricks, old size, well burnt laid flat dry for protection of under ground cable all as specified and directed.

Painting to poles including cross arms, 'V' brackets, 'D' clamps, nuts, bolts, complete including painting with five strips of 30cm each black and white paint in alternate strips from the base of pole upto 1.5mtr height complete, spray painting with two coat of synthetic enamel paint of first quality silver paint over a coat of red oxide primer after and including complete removal of old paint by scratching, rubbing complete all as specified and directed.

(a) Aluminium bus bar capacity 400 Amps for Phase-R-Y-B-3 Nos & 300 Amps for neutral -1 No

(b) MCCB TPN 35 KA 160 Amps- 1 Nos(I/C) Make- Legrand/Havells/ABB

(c) MCCB TPN 16 KA 63 Amps - 1 Nos Make- Legrand/Havells/ABB

(d) MCB TPN 10 KA 32 Amps - 2 Nos Make- Legrand/Havells/ABB

(g) Complete control panel wiring with stranded copper conductor of suitable size along with one set indicator lamp for R,Y & B for each incoming and outgoing feeder

EX SOLDIERS MECHANICAL WORKS