Construction of Indoor Game Area/Stadium and Science lab at Govt. Model Sr. Sec. School Majheen Distt. Kangra (HP)

Amount

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains of soil such as pick work, jumper work, pick jumper work, blasting work, soft and hard blasting and saturated soil, de-watering, including wedging out rock where blasting is prohibited, chiseling or any other mixed variety of soil including shoring, strutting or bailing out water upto any depth or any height quantum of water including de-watering removal of slush and stacking the serviceable and un-serviceable material clear from the edge of excavation as direction of Engineer-in-Charge and returning the stacked soil in 15cm (fifteen centimetre) layers, when required into plinths, sides of foundation etcetra consolidating each deposited layer by ramming, watering and then disposing of all excavated earth as directed by Engineer-in-Charge including carriage of material within all leads and lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST and any other taxes imposed by the Government.

Filling in plinth with sand of approved quality under floors including watering ramming, consolidating and dressing complete as per HPPWD specifications and as directed by Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST and any other taxes imposed by the Government.

Supplying and filling broken/crushed hard stone under floors including watering ramming, consolidating and dressing complete as per HPPWD specifications and as directed by Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetra, with wooden battens and ballies, height of propping and centering in all heights. below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in foundation footings, basis of columns etcetera and mass concrete, and as directed by the Engineer-in-Charge including carriage of material. Within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax and any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetra, with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings, shelves, and the like floor, etcetra. up to any thickness, up to all floor level and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax and any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetra, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams, cantilevers, girders and lintels, sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto any depth/heights, up to all floor level and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals.The rate is including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax and any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeter) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetra, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Columns, pillars, posts and struts, (square, rectangular/ polygonal in plan), upto all floor level, and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax and any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeter) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etcetra, with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls upto any width, up to all floor level and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, GST, Toll Tax, Sales tax and any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeter) thick,welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeter) so as to give a fair finish including centering and shuttering, strutting, propping etc. etra with wooden battens and ballies height of propping and centering in all height below supporting floor to ceiling and removal of same for in situ reinforced concrete of plain concrete in stair cases (excluding landings) except spairl stair case as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, GST, Toll Tax, Sales tax and any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeter) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetra, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Vertical surfacea such as walls (any thickness) partitions and the like including attached column ,pillar posts & struts, plinth and string courses and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax and any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeter) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetra, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in weather shade, Chajjas,corbels etc, including edges as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax and any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeter) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetra, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in small lintels not exceeding 1.5 m (One decimal five metre) clear span moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax and any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeter) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetra, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Vertical and Horizontal fins indivisually or forming box etc. as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax and any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone aggregate 40mm (Forty millimeter) nominal size) and curing complete, in or under water, including pumping or bailing out water/dewatering, removal of slush which may arise at the time of laying under water complete excluding the cost of form work in foundation and plinth in all depths/heights as per HPPWD specifications and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST and any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:6:12 (one cement isto six sand isto twelve graded crushed stone aggregate 40mm (forty millimeter) nominal size) and curing complete, excluding the cost of form work in foundation and plinth/under floors in all depths including pumping or bailing out water/dewatering and removal of slush as required at site complete as per HPPWD specifications and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Malkhana, Royality, Octroi, GST, toll tax and any other taxes imposed by the Government

Stone filling of approved quality behind abutment including watering ramming, consolidating and dressing complete as per HPPWD specifications and as directed by Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST and any other taxes imposed by the Government.

Coursed rubble masonry (First sort) brought to courses with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement is to six sand is to twelve graded crushed/broken stone aggregate 20mm (twenty millimeter) nominal size) within cement mortar 1:6 (one cement isto six sand) and curing complete as per approved drawing, design, specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Second class brick work using common burnt clay building bricks in super-structure above plinth level to all floor level , in cement mortar 1:4 (one cement isto four sand) and curing complete including carriage of material within all leads, lifts and other incidental, or as directed by the Engineer-in-Charge. The rate isincluding Royality, Malkhana, Octroi, GST, Toll Tax, Sales tax and any other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed cement concrete work of Grade M-25 (Twenty five) design mix to obtain the compressive strength of 25 N/mm2 (twenty five newton) per square millimetre with cement concrete with cement contents not less than 360 Kg (three hundred sixty) kilogram) per cubic metre or as per approved design mix for work upto plinth level to give a smooth surfaces mechanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportions as per IS: 9103 to acceletate, retard setting of concrete, improve workability without impairing strength and durability for reinforced concrete work in complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as per directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed cement concrete work of Grade M-25 (Twenty five) design mix to obtain the compressive strength of 25 N/mm2 (twenty five newton) per square millimetre with cement concrete with cement contents not less than 360 Kg (three hundred sixty) kilogram) per cubic metre or as per approved design mix for all above plinth level to all floor level to give a smooth surfaces mechanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportions as per IS: 9103 to acceletate, retard setting of concrete, improve workability without impairing strength and durability for reinforced concrete work in complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as per directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 100mm (one Hundred millimeter) dia ISI marked P.V.C. pipe Weep Holes in brick masonry/stone masonry plain/ reinforcement concrete abutments, wing wall/ return wall, retaining walls and breast walls, extending through the full width of the structure with slope of 1(V): 20H (One vertical isto twenty Horizontal) towards drawing face complete as per drawing and MORD technical specification clause 614,709,1204.3.7 and as per the direction and entire satisfaction of Engineer-in-Charge complete, including carriage of materials with in all leads, lifts and other incidentals. The rates including Royality, Malkhana, Octroi, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying Tor steel of SAIL reinforcement thermo mechanically coated bars of grade Fe 500D for Reinforced Cement Concrete work including TATA Tiscon/ straightening cutting bending, binding and placing in position complete including cost of binding wire for its completion up to all floor levels as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying damp proof course 100mm (hundred millimeters) thick with cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimeter) nominal size and curing complete including cost of form work and as required at site and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax, GST and any other taxes imposed by the Government.

Providing and applying a coat of bitumen of grade VG-10 (Viscosity grade ten) of approved quality residual petroleum using 1.70 Kgs. (one decimal seven zero kilogramms) per square meter on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil including carriage of materials within all leads, lifts and other incidental and as per the direction of Engineer-in-Charge. The rate inclusive of Malkhana, Octroi, Toll Tax Sales tax, GST and any other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed cement concrete work of Grade M-20 (Twenty) design mix to obtain the compressive strength of 20 N/mm2 (twenty newton) per square millimetre) for reinforced cement concrete with cement contents not less than 320 Kg (three hundred twenty kilogram) per cubic metre or as per approved design mix for all above plinth level to all floor level to give a smooth surfaces mechanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportions as per IS: 9103 to acceletate, retard setting of concrete, improve workability without impairing strength and durability for reinforced concrete work complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as per directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Half Brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point five) in super structure above plinth level to all floor level in cement mortar 1:4 (one cement isto four sand) and curing complete as per approved drawing, design, specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying autoclaved cellolar aerated concrete block 200mm (Two hundred millimetre) thick masonry bonded together with polymer based mortar in super structure above plinth level up to all floor level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per approved drawing, design, specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing mild steel channels in door and windows frames manufactured from mild steel channels 75x40x5mm (Seventy five into forty into five millimeter) thick for end frame and for centre frame section 75x40mm (Seventy five into forty millimeter) welded together with MS flat/plate 75x4mm (seventy five into four millimeters) to make mullion including providing MS flat 40x4mm (forty into four millimeters) welded at suitable intervals for welding with hold fast including hinges jamb, lock jamb beed and if required angle thrashold of MS angle 50x25mm (fifty into twenty five millimeters) welded or rigidily fixed by mechanical means with split end tails to each jamb including provision of locking arrangement, shock absorber and steel but hinges 2.5mm (two point five millimeter) thick and double acting spring hinges complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Royality, Malkhana, Toll tax, Sale tax, GST and any other taxes imposed by the Government.

Providing and fixing factory made ISI marked Z-section steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, Fixing with 15x3mm (Fifteen into three millimetre) lugs 10cm (Ten centimetre) long embedded in cement concrete block 15x10x10cm (Fifteen into ten into ten centimetre) of C.C. 1:3:6 (one Cement isto three coarse sand isto six graded stone aggregate 20mm (Twenty millimetre) nominal size) complete all as per approved design, (sectional weight of only steel members shall be measured for payment).as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, GST and any taxes imposed by the Government.

Providing and fixing single/ Double rebate angle iron doors,windows, clerestory windows frame manufactured from steel iron section of 35x35x5mm /40x40x5mm (Thirty five into thirty five into five millimetre obliqe forty into forty into five millimetre) including hinges,jamb,lock,jamb,beads and if required angle thrashold of MS Flat 50x4mm (Fifty into four millimetre) welded or rigidly fixed by mechanical means lugs, with split and tails to each jamb including steel but hinges 2.50mm (Two decimal five zero millimetre) thick with provisio for locking arrangement and shocks as specified and applying a coat of approved steel primer after pre treatment of the surface complete all as per approved design, (sectional weight of only steel members shall be measured for payment).as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, GST and any taxes imposed by the Government.

Providing and fixing 1.0mm (One decimal zero millimetre) thick M.S. sheet Sliding and folding steel door shutters with frame and diagonal braces complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST and any taxes imposed by the Government.

Providing and fixing M.S. grills of required pattern in frames of windows etcetra with M.S. flats, square or round bars etcetra including priming coat with approved steel primer Fixed to steel windows by welding all complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing & Fixing 40mm (Forty millimetre) thick second class deodar wooden penelled shutter having infill panels of 12mm (Twelve millimetre) thick prelaminated board with decorative lamination on both side water proof partical board of action tesa/kitlam/century ply as per ISI and approved shade ncluding cost of adhesive of approved quality as per HPPWD specifications and as directed by Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST and any other taxes imposed by the Government.

Providing and fixing 35mm (Thirty five millimetre) thick factory made ISI marked flush door shutters both side commercial phenol bonded ISI marked of CENTURY/ALPRO/DURO PLY/GREEN PLY No.IS-2202 to be finished with mica lamination of approved shade conforming to IS : 2202 (Part-I) non decorative type, core of black board construction with frame of 1st (first) class hard wood and well matched commercial 3 (Three) ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including ISI marked stainless steel but hinges with necessary screws as per direction of Engineer-in-charge, manufacturer's specification & drawing carriage of material within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST and any other taxes imposed by the Government.

providing and fixing float Glass Panes 5mm (five millimetre) thickness (weight not less than 12.50KG/SQM) (Twelve decimal five zero kilogramme per square metre) of Saint Gobin or Modi Guard in doors, windows and clerestory window ventilators, shutters and partition etcetra with EPDM rubber/ neropen gasket etcetra complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing complete box of Cup Board shall be made of 25mm (Twenty five millimetre) thick water proof termite resistant commercial ply of uniply/Green ply/Centuary ply/Dura ply/marino/Kit ply ISI marked including shelves, back side of Cup Board shall have 6mm (Six millimetre) to 8mm (Eight millimetre) thick water proof ply and all cut portion of Board shall have 6mm (Six millimetre) thick hard wood edging and the shutter from all sides shall also have 6mm thick Hard Wood edging. The shutters from outside shall finished with 1mm (One millimetre) thick lamination ISI marked of approved shade of century/green/9m/Action Tesa and 19mm (Ninteen millimetre) thick water proof commercial ply of uniply /green ply for shelves including hings, PTMT door handle 125mm (One hundred twenty five millimetre) long in wood colour fixed with steel screws of prayag polymer, magnetic catcher and necessary fittings complete in all respect (Outer face of cup board shall be mesuared and paid for) as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement water proofing treatment with DR. Fixit pidilite with two componen tpolymer midified comentitious coating consisting of comentitious powder and a polymer liquid in two coats for first coat to clean and satutae surface and then applying a coat of Dr. Fixit and the same process shall be extended up to 300mm(three hundred millimetre) vertically the second coat shall be applied in opposite direction after four to six hours of application of firstly coat then sprinkle sand on top surface of applied Dr. Fixit then apply cement mortar 1:4 (one cement isto four sand) and admixed with 200mm (two hundred millimetre) of pidiproof LW @ 200mm (Two millimetre) per 50Kgm (fifty kilogrames) bag complete in all respect as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Triple strip vertical type magnetic catcher of approved quality in cupboard/ward robe shutters, including fixing with necessary screws etcetra complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 65x35mm (sixty five into thirty five millimeters) special quality bright finished brass cup-board locks or ward robe locks with six levers including complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 25mm (Twenty five millimetre) chromium plated stainless steel curtain rod having wall thickness of 1.25mm (One decimal twenty five millimetre) with two chromium plated stainless stee brackets fixed with C.P. steel screws and PVC sleeves etcetra dia wherever necessary complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 300x16mm (three hundred into sixteen millimeters) ISI marked Aluminium sliding door bolts ISI marked anodised (anodic coating not less than AC 10 as per IS : 1868) transparent and dyed to required colour and shade with nuts and screws etcetra complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST and any taxes imposed by the Government.

Providing and fixing 200x10mm (Two hundred into ten millimeters) aluminum tower bolts ISI marked anodised (anodic coating not less than AC 10 as per IS : 1868) transparent or dyed to required colour and shade with screws etcetra complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST and any taxes imposed by the Government.

Providing and fixing 150x10mm (one hundred fifty into ten millimeters) oxidised mild steel tower bolts black finish (Barrel type) make of pilot/sheel of required colour and shade with screws etcetra complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST and any taxes imposed by the Government.

Providing and fixing 125mm (one hundred twenty five millimeters) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etcetra complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimeters) ISI marked oxidised M.S (Mild steel) handles conforming to IS : 4992 of colour or shade, with necessary screws etcetra complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimeters) Mild steel hooks and eyes complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing aluminium dei cast body tubular type universal hydraulic door closer ( having brand logo with ISI, Is:3564 embossed on the body, door weight upto 35kg (Thirty five Kilogramme) and door width upto 700mm (seven hundred millimetre) with necessary screws etcetra complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing aluminium hanging twin rubber door stopper, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etcetra complete as per directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and laying 400x400mm (four hundred into four hunderd millimetre/ 600x600mm (six hundred into sixhunderd millimetre) Acid and Akali resistant vitrified floor tiles of Restile/Simpolo/Somany/AGL/ Johnson/Khajria/ Nitco of approved sade and design of office (thickness to be specified by the manufacturer) with water absorption less than 0.08% (Zero point zero eight percent) and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (Twenty millimetre) thick cement mortar 1:4 (One cement isto four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (at the rate three decimal three kilogramme per square metre) including grouting the joints with white cement and matching pigments etcetra, complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and laying 400x400mm (four hundred into four hunderd millimetre/ 600x600mm (six hundred into sixhunderd millimetre) Acid and Akali resistant vitrified tiles Dado/skirting of Restile/Simpolo/Somany/ AGL/Johnson/Khajria/ Nitco of approved sade and design of office in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% (Zero point zero eight percent) and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (Twenty millimetre) thick cement mortar 1:4 (one cement isto four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (at the rate three decimal three kilogramme per square metre) including grouting the joints with white cement and matching pigments etcetra, complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and laying 40mm (Forty millimeters) thick cement concrete flooring 1:2:4 (one cement isto two sand is to four graded crushed stone aggregate 20mm (twenty millimeters) nominal size) mechanically mixed laid in one layer finished with a floating coat of neat cement and curing complete up to all floor level as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads and lifts. The rate inclusive of Octroi, Toll tax, GST and any taxes imposed by the Government.

Providing and fixing 40mm ( fourty millimetre wide and 4mm (four millimetre ) thick glass strips in joints of terrazo/ Cement concrete flooring complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads and lifts. The rate inclusive of Octroi, Toll tax, GST and any taxes imposed by the Government.

Providing and fixing 25mm (twenty five millimeters) thick Kota stone mirror polished slab flooring 55X55cm/55x27.5cm (Fifty five into fifty five centimatre oblige fifty five into twenty seven point five centimetre) of coniform colour with 7.5cm (Seven point five centimetre) wide Jaiselmer yellow marble band over 20mm (Twenty millimetre) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (One cement isto four coarse sand) complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and laying 19mm (Ninteen millimetre) thick Black/Grey polished Granite having semi round nosing gang saw cut, mirror polished, premoulded and prepolished machine cut work top of labs of required size of approved shade, colour and texture laid over 20mm ( twenty millimetre ) thick base of cement mortar 1:4 (one cement isto four coarse sand) laid and jointed with white mixed with matching pigment ,epoxy touch ups including rubbing ,curing, moulding and polishing edges to give high glass finish etcetra complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing M.S (Mild steel) railing over Retaining wall/Breast wall, including applying priming coat of approved steel primer complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Royality, Malkhana, Toll tax, Sale tax, GST and any other taxes imposed by the Government.

Providing and fixing stair case railing having hand rail 50mm ( fifty millimetre) diametre fixed with 35mm (Thirty five millimetre) diametre stainless steel pipe as per detail in combination of 35mmx35mm (Thirty five millimetre into thirty five millimetre) stainless steel square pipe and 15/20mm (Fifteen oblige twenty millimetre) stainless steel balusters in stair case complete in all respect as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Royality, Malkhana, Toll tax, Sale tax, GST or any other taxes imposed by the Government.

Providing and fixing railing above parapet at Terrace level of 75x40mm (Seventy five into forty millimetre) stainless steel hollow pipe hand rail 45cm (Forty five centimetre) height welded to 25x25mm (Twenty five into twenty five millimetre) stainless steel balusters as per drawing design of specifications complete and as per directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing pre-painted steel sheet ridge (Factory made) having proper Gola shape of TATA durashine /Sail/Relience/Jindal steel in 60cm (Sixty centimetre) overall with 0.60 (Zero decimal six zero millimetre) thick pre-painted sheet in roofing over of corrugation of sheet or steel trusses with hot dip metalic zinc coated sheet with top coat of regular modified polyster (RMP) Organic coating of 20 (TWENTY) microns over 5 (five) microns of primer back coat of polyster of 5 (five) microns over 5 (five) primer coating including fixing with prepainted, iron J or L hooks, bolts and nuts 6mm (six millimeter) diametre with prepainted limpet and rubber washer with all accessories as required as per direction of Engineer-In-Charge including carriage of materials with in all leads, lifts and other incidentals as per the specifications approved drawing and design. The rate is including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax and any other taxes imposed by the Government.

Providing and fixing 0.60 (zero point six zero millimetre) thick prepainted steel sheet ISI marked Z-120 of TATA Durashine /Sail/Relience/Jindal steel in roofing over steel truss with hot dip metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (five) microns of primer back coat of polyster of 5 (five) microns over 5 (five) primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimeter) diametre with prepainted limpet and rubber washer complete with all accessories as required as per specifications, approved drawing and design as per direction of Engineer-in-Charge including carriage of material with in all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax and any other taxes imposed by the Government.

Providing and laying 150mm (one hundred fifty millimetre) diameter PVC (polyvinyl chloride) (D-Plast) Pipe of supreme/Finolex/Vectus/Relpipe (Reliance) /Paince pipe for rain water pipe of working pressure not less than 6.00kg (Six point zero zero kilogramme) per square meter including filling the joints with adhesive of approved make complete as per HPPWD specifications approved drawing, design and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate s inclusive of Royality, Malkhana, Octroi, GST, Toll Tax Sales tax and any other taxes imposed by the Government.

Providing and laying 110mm (one hundred ten millimetre) diameter PVC (polyvinyl chloride) (D-Plast) Pipe of supreme/Finolex/Vectus/Relpipe (Reliance) /Paince pipe for rain water pipe of working pressure not less than 6.00kg (Six point zero zero kilogramme) per square meter including filling the joints with adhesive of approved make complete as per HPPWD specifications approved drawing, design and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate s inclusive of Royality, Malkhana, Octroi, GST, Toll Tax Sales tax and any other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty millimetre) nominal diametre on wall faces PVC (D-Plast) Plain bend of Supreme/Finolex/Vectus/Relpipe (Reliance) /Paince for rain water pipes including filling the joints with approved adhesives complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate inclusive of Octroi, GST, Toll Tax Sales tax and any other taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimeters) diametre on wall faces PVC (D-Plast) shoes of supreme/Finolex/Vectus/Relpipe (Reliance) /Paince for rain water pipes including filling the joints with approved adhesives complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate inclusive of Octroi, GST, Toll Tax Sales tax and any other taxes imposed by the Government.

Providing and fixing 110mmdia (one hundred ten millimetre) unplasticised -PVC pipe clips/ clamps of Supereme/ Finolex/Relpipe (Reliance) make approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm (Fifty into fifty into fifty millimetre) hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (one cement isto four coarse sand) and making good the wall etcetra complete with all accesseries as required as per direction of Engineer-in-Charge, including carriage of materials within all leads and lifts complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads and lifts. The rate inclusive of Octroi, Toll tax, GST and any taxes imposed by the Government..

Structure Steel work of TATA/SAILriveted, bolted ot welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per HPPWD specifications approved drawing, design and as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of GST, Toll Tax Sales tax and any other taxes imposed by the Government.

Painting Steel work with Deluxe Multi Surface of Asian/Nerolac Paint to give an even shade (Two or more coat) applied @ 0.90 ltr/10 sqm (at the rate zero point nine zero litre per ten square metre) over an under coat of primer applied @ 0.75 ltr/10 sqm (at the rate zero point seventy five litre per ten square metre) of approved brand and manufacture complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying cement slurry on Reinforcement Cement concrete slab or cement concrete work using 2.75 kgs. (Two point seventy five Kilogram) of cement per square meter of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surfaces complete as per HPPWD specifications excluding cost of centring and shuttering and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying painting coat with ready mixed Pink or Grey primer of Asian/Nerolac approved brand and manufacture on wood work (hard and soft wood) having VOC contents less than 50 (Fifty) grams per litre complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Painting wood work with Deluxe Multi Surface of Asian/Nerolac Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm (at the rate zero point nine zero litre per ten square metre) over an under coat of primer applied @ 0.75 ltr/10 sqm (at the rate zero point seventy five litre per ten square metre) of approved brand and manufacture complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

6mm (six millimeter) thick cement plaster to ceiling with cement mortar 1:3 (one cement isto three sand), upto all floor level complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Royality, Malkhana, Octroi, GST, Toll Tax, Sales tax and any other taxes imposed by the Government.

15mm (fifteen millimeter) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on rough side of brick/concrete/ stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers or rounded angles in all girth and finished even and smooth complete as per HPPWD specifications and as per direction by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rateis inclusive of Royality, Malkhana, Octroi, GST, Toll Tax Sales tax and any other taxes imposed by the Government.

15mm (fifteen millimeter) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on fair side of brick/concrete/ stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers or rounded angles in all girth and finished even and smooth complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Royality, Malkhana, Octroi, GST, Toll Tax ,Sales tax and any other taxes imposed by the Government.

15mm (fifteen millimeters) thick cement plaster with cement mortar 1:4 (one cement isto four sand) in two coats on fair side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth for septic tank complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

20mm (Twenty millimeters) thick cement plaster with cement mortar 1:4 (one cement isto four sand) in two coat backing coat 10mm (Ten millimetre) and finishing coat 10mm (Ten millimetre) thick on fair side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Royality, Malkhana, Octroi, GST, Toll Tax, GST,Sales tax and any other taxes imposed by the Government.

Providing /fixing 1200x1800 (one thousand two hundred into eighteen hundred millimetre) Green Chalk board /Black board of Landmark/Promark shall be made of steel of thickness 0.30 to 0.40mm (zero decimal three zero to zero decimal four zero millimetre) It shall have vitreous Enmal coating of 0.095mm (zero decimal zero nine five millimetre) minimum thickness on top and 0.3mm( zero decimal three) on the back.top shalll be free from waviness and shall show excellient ability.The core material shall be 9mm ( Nine millimetre ) thick MDF board heaving bluk density of 750kg/cum (seven hundred fifty killogramme per cubic metre) and grade -I as per IS 212406-203 edition 2.2 the backing material sheet shall be min.0.25mm (zero decimal two five millimetre) thick electro galvanised steel sheet conforming to is 277-2003.The board shall be fixed on the wall with specially designed J clamps and square clamps with help of Nylon sleves and screws as per site requirment complete as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and applying white cement (Birla white/JK) /based putty of average thickness 1mm (One millimetre) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Finishing wall with weather proof exterior emulsion paint of Asian/Dulux/Berger/Nerolac Suraksha Paint of approved shade having VOC less than 50gm/Litre (Fifty gram per litre) and lor resistance as per IS 15489 : 2004, Akali for fungal resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicom additives new work (Two or more coats) applied @ 1.43 ltr (one point four three liter)/10sqm (ten square metre) over and including primer coat of exterior primer applied @ 0.90 kg (Zero point nine zero killograme) /10 sqm (ten square metre) complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Painting two or more coats with eacrylic washable emulsion of Asian /Dulux/Berger/Nerolac Suraksha paints based water thinnable sealer of approved brand and manufactures on wet or portion of plastered surface including cleaning the surface of all dirt, dust and other foreign matter complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, GST, Toll Tax Sales tax and any other taxes imposed by the Government.

Painting two or more coats with eacrylic emulsion of Asian /Dulux/Berger/Nerolac Suraksha paints based water thinnable sealer of approved brand and manufactures on wet or portion of plastered surface including cleaning the surface of all dirt, dust and other foreign matter complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, GST, Toll Tax Sales tax and any other taxes imposed by the Government.

Applying two coat or more coat of Interior emulsion paint of Asian paint / Nerolac/Berger Paint/Dulux of above dado/skirting approved brand and manufacture for interior painting with brushes plain smooth finish composed of acrylic polymer in emulsion in organic/special pigment siliceous aggregate anti fungicides ant-rusting & foaming in two coat including necessary putty to give smooth even surface, sand papered smooth complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is inclusive of Octroi, GST, Toll Tax Sales tax and any other taxes imposed by the Government.

Providing plinth protection with 40mm (Forty millimetre) thick interlocking tiles of NTC of approved shade and design with 23cm (Twenty three centimatre) dia half round reinforced cement concrete pipe cement concrete paver blocks for drainage purpose including laying over 10cm (Ten centimetre) thick concrete 1:4:8 (One cement isto four sand isto eight crushed stone aggreage) beding haunching complete as per HPPWD specifications approved drawing, design and as directed by the Engineer-in-Charge and carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Malkhana, Royality, Octroi, toll tax, GST and any other taxes imposed by the Government.

Providing and laying in position cement concrete 1:3:6 (one Cement isto three coarse sand isto six graded stone aggregate 20mm (Twenty millimetre) nominal size) of specified grade excluding the cost of centering and shuttering - All work up to plinth level complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 60mm (Sixty millimetre) thick factory made cement concrete interlocking paver block of NTC/Unistone/Attanticc of M-30 (Thirty) grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm (Fifty millimetre) thick compacted bed of coarse sand, filling the joints with line sand etcetra complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 40mm (forty millimetre) Red sand stone single slab fine dressed flooring over 20 mm (twenty millimetre) (average) thick base of cement mortar 1:5 (One cement isto five coarse sand) including pointing with cement mortar 1:2 (One cement isto two stone dust) admixed with pigment to match the shade of stone and pointing with same mortar complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government. .

Providing and fixing 50mm (Fifty millimetre) thick Kabaddi Floor mates as per Technical specification over cement Concrete flooring complete as per HPPWD specifications or as directed by the Engineer-in-Charge, up to all floor level including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government. .

Providing and fixing polycarbonate transparent sheet 1.20mm (one decimal two zero millimetr) thick in roofing with galvanised J or L hooks bolts and nuts with G.I Limpet and bitumen rubber washes complete with all accessories as required as per specification drawing, design or as directed by the Engineer-in-Charge, up to all floor level including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government. .

Providing and fixing flashing 38cm (Thirty eight centimeter) overall with 0.60mm (Zero point six zero millimeter) thick prepainted steel sheet of Tata Dura Shine/Reliance/Jindal steel) in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (five) microns of primer coating +back coat of polyster of 5 (five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks and bolts and nuts 6mm (six millimeter) diameter and prepainted G.I limpet and bitumen washers complete with all accesseries as required as per direction of Engineer-in-Charge, including carriage of materials within all leads and lifts complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads and lifts. The rate inclusive of Octroi, Toll tax, GST and any taxes imposed by the Government.

Providing and fixing M.S. B.P. sheet 2 mm (two millimetre) thick of TATA/SAIL for eaves board/Facia/ Soffit/Ceiling including cutting, fixing and jointing with gass/electric welding with steel roof member and applying a coat of red lead primer complete as per PWD specification, approved drawing and design (frame work is to be measured and paid for separately) including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing Badminton poles and net one set (Movable) as per Technical specification complete with all accessories as required as per the direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government. .

Providing and fixing Fume Cupboard having exposed surface 3.60 (Three point six zero) square metre (front area) as per Technical specification and further as per Arch. Drg No 210 job no.3303 with all accessories as required as per the direction of the Engineer-in-Charge, up to all floor level including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government. .

Providing and fixing 1620 (20mm OD) Pipe (One thousand six hundred twenty) (Twenty millimetre outer dia pipe) Polyethelene-Aluminium-Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS-15450, U.V. of Kitec stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C (Eighty degree celsius), including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etcetra, with clamps at 1.00 (One) metre spacing. This includes the costs of cutting chases and including testing of joints complete concealed work and making good the wall etcetra as per approved drawing, design, specifications, as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 2025 (25mm OD) pipe (Two thousand twenty five) (Twenty five outer dia pipe) Polyethelene-Aluminium-Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS-15450, U.V. of Kitec stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C (Eighty degree celsius), including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etcetra, with clamps at 1.00 (One) metre spacing. This includes the costs of cutting chases and including testing of joints complete concealed work and making good the wall etcetra as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Making connection of galvanised steel distribution branch with galvanised iron main 25mm to 40mm (twenty five to forty milimeter) nominal bore by providing and fixing tee including cutting and threading the pipe complete as per approved drawing, design, specifications and as per direction and entire satisfaction of Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST and any other taxes imposed by the Government.

Providing and laying in trenches in PVC Chemical resietant and waste & ventilating pipe of Superme/Finolex/Relpipe (Reliance) ISI marked and carriage of material within all leads, lifts and other incidentals. The rate is including Octroi, GST, Sales tax, Toll tax and any other taxes imposed by the Government. 110mm (One hundred ten millimetre) diametre

Providing and laying in trenches in PVC Chemical resietant and waste & ventilating pipe of Supreme/ Finolex/Relpipe (Reliance) ISI marked and carriage of material within all leads, lifts and other incidentals. The rate is including Octroi, GST, Sales tax, Toll tax and any other taxes imposed by the Government. 75mm (Seventy five millimetre) diametre

Providing and fixing P.V.C holder bat clamps of Supreme/ Finolex/Relpipe (Reliance) approved design to PVC (Polyvinyl chloride) pipe 110mm (One hundred ten millimetre) diametre embedded in and including cement concrete blocks 10x10x10cm (Ten into ten into ten centimetre) of 1:2:4 mix (One cement isto two sand coarse sand isto four graded stone aggregate 20mm (Twenty millimetre) nominal size, including cost of cutting holes and making good the walls etcetra complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing P.V.C holder bat clamps of Supreme/ Finolex/Relpipe (Reliance) approved design to PVC (Polyvinyl chloride) pipe 75mm (Seventy five millimetre) diametre embedded in and including cement concrete blocks 10x10x10cm (Ten into ten into ten centimetre) of 1:2:4 mix (One cement isto two sand coarse sand isto four graded stone aggregate 20mm (Twenty millimetre) nominal size, including cost of cutting holes and making good the walls etcetra complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten millimetre) diametre P.V.C. Supreme/ Finolex/Relpipe (Reliance) heal rest Confirming to BIS-14735 including filling the joints with approved adhesive complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 75mm (Seventy five millimetre) diametre P.V.C. Supreme/ Finolex/Relpipe (Reliance) equivalent heal rest Confirming to BIS-14735 including filling the joints with approved adhesive complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing P.V.C. (Polyvinyl chloride) (D-Plast) fittings and accessories P.V.C. (Polyvinyl chloride) collars 110mm (one hundred ten millimeter) diameter ISI marked confirming to IS-14735-99 medium class make of Finolex/ Relpipe (Reliance)/Supreme of approved manufacture including fixing with approved adhesive etcetra complete as per HPPWD speciifications, approved drawing, design, as per the direction and entire satisfaction of the Engineer-in-Charge and carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST and any other taxes imposed by the Government.

Providing and fixing P.V.C. (Polyvinyl chloride) (D-Plast) fittings and accessories P.V.C. (Polyvinyl chloride) collars 75mm (Seventy five millimeter) diameter ISI marked confirming to IS-14735-99 medium class make of Finolex/ Relpipe (Reliance)/Supreme of approved manufacture including fixing with approved adhesive etcetra complete as per HPPWD speciifications, approved drawing, design, as per the direction and entire satisfaction of the Engineer-in-Charge and carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST and any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred fifty ten millimetre) diametre P.V.C (Polyvinyl chloride) cowl Supreme/ Finolex/Relpipe (Reliance) ISI marked including fixing with approved adhesive with steel screws and rawal plugs etcetra complete including carriage of material with in all leads, lifts and other incidentals The rate is including Sales tax, GST, Toll tax and any other taxes imposed by the Government.

Providing and fixing 75mm (Seventy five millimetre) diametre P.V.C (Polyvinyl chloride) cowl Supreme/ Finolex/Relpipe (Reliance) ISI marked including fixing with approved adhesive with steel screws and rawal plugs etcetra complete including carriage of material with in all leads, lifts and other incidentals The rate is including Sales tax, GST, Toll tax and any other taxes imposed by the Government.

Providing and fixing PVC (Polyvinyl chloride) floor trap make of Finolex/ Relpipe (Reliance) /Supreme of approved manufacture self cleaning design including fixing with approved adhesive, cost of cutting making good the wall complete 110x90mm (One hundred ten into Ninety millimeter) as per approved drawing, design, specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing white vitreous china laboratory sink No. 1355 size 550x400x180mm (Five hundred fifty into four hundred into one hundred eighty millimeter) with C.I. brackets C.P brass chain with rubber plug 40mm (Forty millimeter), CP brass waste and 40mm (Forty millimetre) CP brass trap with necessary CP brass unions complete including painting of fittings and brackets, cutting and making good the walls wherever required complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetres) nominal size diametres CP brass chain and rubber plug for wash basin as per approved drawing, design, specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material, within all leads, lifts of materials and other incidentals The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimeter) nominal diameter G.I/M.I. union for wash basin or sink as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including Sale tax, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeter) nominal diameter CP brass waste of continental series of Jaguar/contessa series of Hindware/Ocean series of Cera/Vintage series of Kerovite Hindon series of Jal for wash basin or sink including brass check nut complete and carriage of material within all leads, lifts and other incidentals. The rate is including Sale tax, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetre) diametres C.P grating of continental series of Jaquar/Cassic series of Hindware/Ocean series of Cera/Vintage series of Kerovite & Hindon series of Jal for gully floor or nahni trap complete as per approved drawing, design, specification and direction by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals.The rate is including Sale tax, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 600x450mm (Six hundred into four hundred fifty millimetre) beveled edge mirror of Continental series of Jaquar contessa of Hindware/Ocean series of Cera/Vintage series of Kerovite & Hindon series of Jal superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing C.P brass towel rail 600x20mm (Six hundred into twenty millimeters) C.P. Continental series of Jaquar/Contessa series of Hindware/Ocean series of Cera/Vintage series of Kerovite & Hindon series of Jal complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is including Octroi, GST, Sale tax, Toll tax and any other taxes imposed by the Government.

Providing and fixing C.P liquid soap container of continental series of Jaguar/Contessa series of Hindware/ Ocean series of Cera/Vintage series of Kerovite & Hindon series of Jal 109mm wide 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fitting of approved quality and colour complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including GST, Sale tax, Toll tax or any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetre) diametre C.P brass pillar tap with capstan head of Continentel series of Jaguar/Contessa Series of Hindware/Ocean Series of Cera/Vintage series of Keravite & Hidon series of Jal C.P. brass Pillar tap with capstan head complete upto all floor level as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is including Sales tax, GST, Toll tax and any other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeter) nominal diameter P.V.C.flexible waste pipe of Supreme, finolex,prince,Relpipe (Reliance) ISI marked for wash basin or sink including brass check nut complete as per direction by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Sales tax, GST, Toll tax and any other taxes imposed by the Government.

Providing and placing on terrace (at all floor levels) polyethylene water stonage tank of supreme, Finolex, Vectus/Relpipe (Reliance) IS : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipe but without fitting and the base support for tank complete as per approved drawing, design, specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Sale tax, Toll tax, GST and any other taxes imposed by the Government.

Constructing masonry Chamber 60x60x75cm (SIxty into sixty into seventy five centimetre) inside, in brick work in cement mortar 1:4 (one cement isto four coarse sand) for Slvice valve, with cast iron surface box 100mm (One hundred millimetre top diametre, 160mm (One hundred sixty millimetre bottom diametre and 180mm (One hundred eighty millimetre deep inside) with chained lid and RCC top slab 1:2:4 mix (one cement isto two coarse sand four graded stone aggregate 20mm (Twenty millimetre) nominal size), including necessary excavation, foundation concrete 1:5:10 ( one cement isto five fine sand isto ten graded stone aggregate 40mm (Forty millimetre) nominal size ) and inside plastering with cement mortar 1:3 (one cement isto three coarse sand) 12mm (Twelve millimetre) thick, finished with a floating coat of neat cement complete as per standard design With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 (Seven point five) complete as per approved drawing, design, specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying in trenches ISI marked 15mm (Fifteen millimeters) nominal bore/ diameters) galvanized mild steel tubes (Medium grade) tube fittting as per direction by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Sale tax, Toll tax, GST and any other taxes imposed by the Government.

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5m, (One point five metre) including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm (Twenty centimetre) in depth, including consolidating each deposited layer by ramming, watering, etcetra and disposing of surplus excavated soil as directed, within a lead of 50m (Fifty metre) Pipes, cables etcetra exceeding and dia complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Sale tax, Toll tax, GST or any other taxes imposed by the Government.

Providing and fixing in cast iron man hole cover with frame the weight of cover and frame 38 kg (weight of cover 23 kg and weight of frame 15 kg ) size of man hole 455x610mm as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 1.00 HP (One horse power) water lifting pump ISI marked of Kirloskar / Cromption including accessories and making necessery connection as required at site for its functioning complete and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying in trenches ISI marked 20mm (twenty millimeter) nominal bore/ diameter) galvanized mild steel tubes (medium grade) tube fittings and clamps jointing, Testing and carriage of material including Jointing, Testing and carriage of material within all leads, lifts and other incidentals. The rate is including Octroi, GST, Sales tax, Toll tax and any other taxes imposed by the Government.

Gianeshwar Dutt