Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.9 LAccepted-AOC | L1 | Accepted-AOC Work awarded | |
| 2 | L2₹5.0 L+₹6,656 (1.36%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | Rejected-Technical | - | Rejected-Technical DD and FDR Not submitted by the bidder |
Tender Value
₹4.0 L
EMD Value
₹8,035
Closing Date
26 May 2025, 11:00 amClosed
EE Jal Shakti Division Larji
EE Jal Shakti Division Larji
(SH- C/O RCC storage tank of 20000 ltrs capcity at Beogi and Providing L/J and testing of G.I pipe line from Govt. middle school Deotha to Village Balogi) Under JJM
2025_HPIPH_105249_1
NIT No-1144-1243 dated 13.05.2025
Open Tender
Civil Works
Item Rate
120 days
Banjar
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
EE Larji
₹8,035
30 Jun 2025
13 May 2025
26 May 2025
13 May 2025
26 May 2025
13 May 2025
Amount
Excavation in foundation trenches etc. in earth work lift up to 1.5 mtrs. Stacking the excavated soil not more than 3 metres away from the edge of excavation and then returning the stacked soil in 15 cm layers when required in to plinth and sides of foundations, consolidating each deposited layer by ramming , watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres in pick jumper work.
Providing and laying cement concrete 1:3:6 (1cement :3 sand :6 graded stone agg.40mm nominal size) and curing complete excluding the cost of form work in in foundation and plinth.as per direction and to the entire satisfaction of Engineer in charge
Providing form work with steel plates 3.15mm thick welded with angle iron frame 30x30x5mm so as to give a fair finish including centring,shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling in all heights and removal of the same for insitu -reinforced concrete and plain concrete work in :
Vertical surfaces such as wall (any thickness but not less than 0.1 m thickness) attached pillasters, buttresses, plinth and string courses, etc.
Flat surfaces such as soffits of suspended floors , roofs, landings & the like . Floors etc. up to 200 mm in thickness complete in all respects within all leads and lifts as per direction of the Engineer-in-charge.
Edge of slabs & break in floors & walls under 20cm wide complete in all respects within all leads and lifts as per direction of the Engineer-in-charge.
Providing and laying cement concrete 1:1.5 :3 ( 1cement: 1.5 sand: 3graded stone aggregate 20 mm nominal size )and curing complete excluding the cost of form work and reinforcement in:-
Foundation and Plinth
ii) Walls(any thickness but ot less than 0.1 mtr thickness) attached pilasters, buttresses, plinth and string courses etc. from top of foundation level up to floor two level.
Providing and laying cement concrete work 1:2:4(1cement :2 sand:4 graded crushed stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work with in all leads and lifts as per the entire satisfaction & direction of the Engineer - in - Charge. in Suspended floor, roofs landings shelves and their supports balconies, beams, girders ,bressumers and cantilevers etc in all leads and lifts.
Providing Laying tor steel reinforcement for reinforced cement concrete work including bending binding and placing in position complete including the cost of binding wire in all leads and lifts.
Providing and fixing man hole cover made with angle iron 40 x40x 3 mm thick( base frame) & 30x 30x 3 mm thick top frame covered with MS sheet 6 mm thick with locking arrangements to avoid the anti social activities ( lock with a set of 3 keys). ( Weight of man hole cover should not be less than 34 Kg) with in all leads and lifts
Providing and fixing brass wheel valve as per specification 32 mm dia with in all leads and lifts
Laying, jointing of GMS tube in trenches of following meter including providing and fixing tube fitting such as bends, tees, air valves, unions and collars etc. including carraige of GI pipes as per direction and to the entire satisfaction of the Engineer-in-charge (earth work in trenches to be measured and paid for separately).
32 mm dia
Providing and fixing of G.I Union of following sizes complete with in all respect and including all leads and lifts and entire satisfaction of engineer in charge. 32 mm
Providing and fixing of G.I Tee of following sizes complete with in all respect and including all leads and lifts and entire satisfaction of engineer in charge. 32 x32x20 mm
Nimat Ram (BID ID -518874)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .